Virtual Directory for NDES server missing on IIS

I installed an NDES server on windows 2008 R2 Enterprise server. I am able to connect to the website via the url
http://<severname>certsrv/mscep and
http://<servername>certsrv/mscep_admin. I can successfuly issue certs with the following urls also.
but if I look in the IIS Managment Console I am unable to view the certsrv directory even if I am logged on as an enterprise admin. Does anyone know how to make those directories appea?
The only way I have been able to make the Certsrv directory viewable is to also install the WebEnrollment service also.
I dont need the webenrollment service but I need to enable https on those directories.
Does anyone know what might be going on?

You don't need a virtual directory in order to manage NDES. The whole thing installs as an ISAPI application. Manage it through the link
http://localhost/certsrv/mscep_admin/. If you are having some trouble with NDES, check out
http://social.technet.microsoft.com/wiki/contents/articles/9063.network-device-enrollment-service-ndes-in-active-directory-certificate-services-ad-cs-en-us.aspx that discusses NDES quite thoroughly.
As for verifying your installation, check the Application Pools in IIS and the registry settings HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\MSCEP\

Similar Messages

How to define a virtual directory for 1virtual server?

Hi there,
The last part is always the hardest. I succesfully converted my Apache configuration to the SunONE setup but one section and I fail to grasp where I'm going wrong...
SunONE Webserver 6.1SP5, I have quite a few virtual servers divided over several virtual classes. And now I'm trying to configure a 'virtual directory' (pfx2dir nametrans) limited to a single virtual server but no matter what I try I can't get it to work...
In the administration guide I read about the NameTrans directive and how it should be used in the default object (in obj.conf ofcourse). So when I have something like this all works as it should, but for all virtual servers in the class:
<Object name="default">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Object>So when reading up even more I came across the NSAPI programmers guide which explained that you can have both <Object> and <Client> tags. Because of the 'urlhost' parameter with the Client tag I figured that it should be possible to limit the NameTrans line mentioned above to but one virtual server:
<Client urlhost="catslair.intranet.lan">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Client>But whenever I use this approach the server refuses to start and presents me with an error:
[13/May/2006:16:38:10] config (19621): CORE3185: Invalid configuration: File /usr/local/sun/SUNWwbsvr/https-magi.intranet.lan/config/server.xml, line 178, column 99: HTTP3258: Error processing Mirrors.obj.conf line 51: HTTP2215: directive outside objectAt first I didn't understand exactly what it meant, I even stumbled upon a bug report which triggered the same error (http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4979377) but after reading up on this I can only conclude that NameTrans can only be used within an <Object> block. The manuals also hint into this direction since it becomes obvious that the preffered approach is using this in the default object.
So picture my surprise when I came across http://docs.sun.com/source/817-6252/npgobjcn.html#wp1041206 in the NSAPI programmers guide, its past the table. One of the examples shows this approach:
<Client odds="25%">
NameTrans fn="redirect" from="/Pogues" url-prefix="http://pogues.example.com"
</Client>Because I was sure about urlhost being a parameter for the Client tag I tried copying the above example, but when I give it a try I'm once again greeted with the error I mentioned earlier "directive outside object".
So can anyone please point me in the right direction? Is it possible to setup a virtual directory for a single virtual server and if so how do I proceed since <Client> doesn't seem to work. thanks in advance for any tips you can give me.
Message was edited by:
Lion-O

Thanks a lot for the example, that fixed the problem.
I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening.

Creation of virtual directory for EPMA during 11.1.2.2 configuration

Hi Experts,
I was trying to install and configure the EPM 11.1.2.2 products on a POC machine with Windows 2008 R2. I was able to install and configure some products and i was facing issue with the EPMA configuration where it struck during "Creation of EPMA virtual Directory". I can see the virtual directory created but not sure why this is not finishing up and just struck at this level, deployment is all fine. Attached the config log for any reference
I have enabled Windows authentication in IIS 7 and disabled Basic authentication
Please let me know if anyone has come across this issue and thanks for your help
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01496] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] IIS version is 7
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01516] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Removing virtual directory: hyperion-bpma-server
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: removeVirtualDir
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01508] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating virtual directory: hyperion-bpma-server(2:2), configRoot: C:\OracleEPM\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\WebService
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01504] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating application pool: DefaultAppPool
[2012-11-14T11:33:52.745-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createApplicationPool
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: Updating .Net version of application pool...
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: .Net version v2.0 will be used
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: updateApplicationPoolManagedRuntime
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01510] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Using default application pool for hyperion-bpma-server
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createVirtualDir
[2012-11-14T11:34:00.997-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: installAspDotNet
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [TRACE] [EPMCFG-07380] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.utils.os.windows.IisUtils] Getting IIS7 Default site name
Regards

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

Cannot create Virtual Directory in Windows Server 2008 R2 SP1 Environment

Dear all,
I am trying install Reporting Services 2005 on a Windows Server 2008 R2 SP1 Enterprise machine.
So far we successfully did the following steps
- Install SQL Server Reporting Services
- Configure Service Account (Domain-User)
After creating virtual Directory, we made several steps to avoid HTTP 400 Bad Request in Report Manager:
1. Disable LSA Loopback in Registry and restart server
2. Enhance Service Startup time to 60000ms and restart Server
3. Set Application Pool to ASP.NET 2.0 Classic Mode
4. Modify RSWebApplication.config and set These entries:
<ReportServerUrl>http://servername/ReportServer</ReportServerUrl>
<ReportServerVirtualDirectory></ReportServerVirtualDirectory>
After all the Reporting Services Configuration Manager still shows a red sign and we cannot continue creating the database.
How is it possible to solve this?
We appreciate any help.
Best regards,
Mark
Mark Kuschel
Blog
Xing

Hi Mark,
As per my understanding, we can refer to the following methods to troubleshooting the issue you occurred.
Install SQL Server 2005 Service Pack 3.
Deleting the newly-created virtual directory using IIS manager and then rebooting the server.
In the Report Manager Virtual Directory dialog box, create a virtual directory for Report Manager, then change the Website to Reporting.
Enable Apply default settings.
The following link is for your reference:
http://www.mathgv.com/sql2005docs/SQL2005ReportingServicesInstall.htm
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[WL5.1] Virtual Directory for JSP: Possible??=

Hi,
          I'm looking for a way to use a virtual directory for JSPs within my
          webapp. I want to access my JSPs by e.g. /webappname/layouts/jspname.jsp
          while they should be physically located somewhere else in the file
          system. The following snippet works for static files, but I suppose
          there is no docHome for JSPs:
               <servlet>
                    <servlet-name>ImageAlias</servlet-name>
          <servlet-class>weblogic.servlet.FileServlet</servlet-class>
                    <init-param>
                         <param-name>docHome</param-name>
                         <param-value>c:\dev\fbs\images\</param-value>
                    </init-param>
               </servlet>
               <servlet-mapping>
                    <servlet-name>ImageAlias</servlet-name>
                    <url-pattern>/image/*</url-pattern>
               </servlet-mapping>
          Thanks for any hints,
          Daniel


Hi,
          I'm looking for a way to use a virtual directory for JSPs within my
          webapp. I want to access my JSPs by e.g. /webappname/layouts/jspname.jsp
          while they should be physically located somewhere else in the file
          system. The following snippet works for static files, but I suppose
          there is no docHome for JSPs:
               <servlet>
                    <servlet-name>ImageAlias</servlet-name>
          <servlet-class>weblogic.servlet.FileServlet</servlet-class>
                    <init-param>
                         <param-name>docHome</param-name>
                         <param-value>c:\dev\fbs\images\</param-value>
                    </init-param>
               </servlet>
               <servlet-mapping>
                    <servlet-name>ImageAlias</servlet-name>
                    <url-pattern>/image/*</url-pattern>
               </servlet-mapping>
          Thanks for any hints,
          Daniel

How to create a virtual directory for the Report Server

Hi, I am new to server admin and need help with configuration.
I would like to map a physical directory on the server so that users can use a virtual path to save report outputs in that location. For example the form will call the report with desname = 'd:\xyz\abc.pdf' and the output file will be saved in a predefined directory on the server. I know how to do it on the forms server using the orion_web.xml but not sure about the report server configuration.
We are using rwservlet to run reports on 10G release2/Windows 2000.
Thanks in advance,

Virtual directories are mapped in the httpd.conf file in the Apache directory as aliases:
Alias /xyz/ "d:\xyz\"
You can now call the report output with
http://server/xyz/abc.pdf

How to set up a virtual directory on Application Server

The environment of my application is Application server 9i version 2, on windows 2000, form 9.0.2.
I am trying to get the ORACLE 9i forms show_document to work.
I have successfully created an out file in the server directory.
I need the document to be displayed by the form.
Let me tell you more about my server.
I installed Oracle application server on drive E.
I copied my application to drive E and named PY which has 4 folders including :
E:\PY\fmb (for fmb)
E:\PY\forms (for fmx)
E:\PY\sql (for sql programs)
E:\PY\locrep (for lst files which are generated from sql programs)
Someone told me I should create a virtual directory, e.g. docs, in your httpd.conf file to point to e:\py\locrep
I've seen 4 httpd.conf files so I don't know which one I should modify and what should I type in exactly on what part ????
E:\ora9ias\apache\apache\conf\httpd.conf
E:\ora9ias\apache\apache\conf\httpd.conf.default
E:\ora9ias\apache\apache\conf\httpd.conf.smibak
E:\ora9ias\dcm\config\plugins\apache\httpd.conf
After I modify the httpd.conf file, so what will my URL be ? Also, I have a lot of reports, I would like to run different reports at the same time ??????
Thank you very much.
Trang

The best way to edit httpd.conf is using Enterprise Manager Website. Open this site (http://machine:1810) and drill down on your application server, and then on HTTP Server. Open link Advanced server Properties. Now you see a list of all configuration files. Click on a file to open it.
To add the virtual path:
- You could best add your virtual path in file forms90.conf (it is included in httpd.conf with the <include> tag).
- Within this file you already find some virtual path definitions: Look for the AliasMatch tag, e.g. for the 'forms90/html' virtual directory.
- Copy this line and change 'html' into the directory name you like to use, e.g. 'myfiles'. Map it to the physical directory (on your E: drive) where your files are. (E: must not be a network drive, however).
- browse to your files using: http://machine:7777/forms90/myfiles/filename.
Peter

Help with virtual directory for CFIDE CF 9.0.2

Thanks in advance ... if anyone could point me in the right direction for this issue I would appreciate it....
I set up the CFIDE virtual directory as per the lockdown guide for CF 9.0.2. Every website works except I have a path issue with one file... see below.... it throws a 404 error:
in administrator I have the default ScriptSrc dir set to /cf-scripts/
I have a virtual directory in the websites in IIS 7.5 named cf-scripts mapped to /CFIDE/scripts/
All the scripts come up correctly except mapiconmaker.js .... somehow the path to this file is drawing out incorrectly and causing the 404.error
<script type="text/javascript" src="/cf-scripts/ajax/messages/cfmessage.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/package/cfajax.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/yui/animation/animation-min.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/ext/adapter/yui/ext-yui-adapter.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/ext/ext-all.js"></script>
<script type="text/javascript" src="https://maps.googleapis.com/maps/api/js?sensor=false&key=my-key"></script>
<script type="text/javascript" src="/CFIDE/scripts/ajax/ext/map/mapiconmaker.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/ext/map/GMapPanel3.js"></script>
<script type="text/javascript" src="/cf-scripts/ajax/package/cfmap.js"></script>
<link rel="stylesheet" type="text/css" href="/cf-scripts/ajax/resources/ext/css/ext-all.css" />
<link rel="stylesheet" type="text/css" href="/cf-scripts/ajax/resources/cf/cf.css" />
the console error reads:
GET http://mobile.mydomain.com/CFIDE/scripts/ajax/ext/map/mapiconmaker.js 404 (Not Found) map-listings.cfm:14
Uncaught ReferenceError: MapIconMaker is not defined
tag usage:
<cfmap name="listingMap"
    centerlatitude="33.580563"
    centerlongitude="-117.262376"
    doubleclickzoom="true"
    overview="true"
    scrollwheelzoom="true"
    showscale="false"
    tip="Bear Creek Listings"
    zoomlevel="15"
    width="500"
    height="500">
      <cfloop query="listings">
       <cfmapitem name="#id#" latitude="#latitude#" longitude="#longitude#" tip="#address#" />
        </cfloop>
</cfmap>
the map displays properly with approx 20 icon locations.

It's possible that the path to that JavaScript file was hardcoded in the ColdFusion source code, rather than calculating the path using the CF Administrator ScriptSrc value as it does for the other resources. Could you test this with CF10 or CF11 to see if this problem is already fixed in subsequent versions? Or maybe file a bug report with Adobe.
-Carl V.

Virtual Directory for EVMNU functions: 2 application servers

Hi,
We are migrating from development to production. Production environment has 2 application server (load balancing) and we need to set up a virtualdirectory to allow the use of EVMNU functionality.
Setting up a virtual directory is not that hard, but what needs to be done when we have 2 application servers?
Thx

Bjorn,
Is it working on the appserver where the files are stored?
On the other appserver, how did you reference the drive?
folder?
I don't think you need special security? Is this folder shared?
Kind regards,
sam

Virtual IP for new Server Pool

We are the stage of configuring pools now that the ovm manager can see the ovm server, what network vlan do you specify the virtual IP for the pool is this the management VLAN as that's what the OVM server is configured to when installing OVM server??

The virtual IP has to be on the management subnet. The VIP services the server pool for HA. It should be on the management subnet.
I have run into an issue where you try to do a network boot to load a kickstart file and some traffic seems to come from the management subnet even if you have the networks defined and are using a different IP for the guest from the "VM" subnet. The network boot must be using the management subnet to pull the boot image to load the Guest from the network. To work around this, I had to allow both subnets access to where I had my ISO images loaded. Also, my iso image was on a mult homed linux server and I had to define strict routing on the server to keep packets confined to each individual network. Like to drove me crazy for two days. Finally got it working.

Virtual Directory for app web server

I have a web application that runs over Windows 2000 advanced server, does anybody know how can i change the address, i.e.: http://localhost:8080/servlet/eureka to http://localhost or http://something ?
I have j2re 1.3 and java plug-in .
Thanks

in order to run http://localhost with out specifying port number, you need to set your server port to 80 (which is an official http port) in the configuraton file. I don't know what kind of server you are using. If you use Tomcat, you need to modify your server.xml file from 8080 to 80.

Setting up class root directory for application server

Hi all,
When i try to deploy my Ejnterprise java bean in sun one application server i get ar error dialog box " plz consult online assistance for setting class root directory" while loading the class files.I tried online but in vain.Can any one tell me how to set up the class root directory in sun one app server platform edition 8.
But i had many other beans b4.suddenly m encoutering this problem from past 2 3 days.Kindly help me.
Waiting for ur replies!
Thanks,
Akshatha

Hi Eric and Jennifer
A couple of answers to your questions:
1. LC Forms is just an API - you have to build your own web application (or some other type of application) if you want your users to be able to interact with PDF forms.
2. You can use Eclipse to build web applications. It's just one of many tools for doing so, but it's a fantastic development environment, and it's free.
3. Lomboz no longer exists. It has been integrated directly into Eclipse as one of the sub-projects, "WebTools". The easiest way to install web tools is via the Callisto "packaging". This makes sure that you get all the right versions of everything you need. See:
http://www.eclipse.org/callisto/
4. The tutorial mentioned still provides some useful information, although names have been changed.
5. There are lots of books about developing Web Apps in Java, using servlets or JSP.
6. FormsIVS is just a small sample application that allows you to test rendering or prepopulating a form. It's not intended as an end-user product.
7. If you're interesting in some assistance, we do provide training, mentoring, and turnky application development. Send an email to info "at" avoka.com if you want more info.
Good luck...
Howard
http://www.avoka.com

Create a LabVIEW Based Virtual Instrument for NI Multisim - Missing Function?

Hi there,
I am trying to build an output instrument for NI Multisim according to the instructions here:
http://zone.ni.com/devzone/cda/tut/p/id/5635#toc3
The problem is that i cannot find the function i see labeled as "Gen Signal" anywhere in my Labview version (8.5) so i can
use it in the "Update Initial Output Data"case box!
Excuse my ignorance, but i am new to LabView and unfortunately in electronic schematics as well.I am doing this project for my school assignment.
Is it available in another Labview version, or can you tell me where i can spot it so i can build my VI?
Thanks in advance. I hope i posted on the right section...

234123410…
Here is a very simple output example that you can start with.   Likely you are still having issues with either the build settings or something with one of the subVIs that is not properly being included for some reason.   I do notice that sometimes when a waveform VI from the Signal Processing Pallette that originally is coming from the NI_MABase.lvlib, it can sometimes have issues with the inclusion / build settings. This seems to be an issue with the LabVIEW project build and not necessarily with the Multisim interface.
So lets take a simple example as shown here...
The two core source files are "SimpleOutputInstrument.lvproj" and "SimpleOutputInstrument.llb".    The .llb contains the "Simple Output Instrument.vit" - which is the main VI, "Simple Output Instrument_multisimInformation.vi" which is the Multisim information VI to set the pins and Instrument name and "Simple Sine Waveform.vi" which is a simpler form of a sine wave generator (not using the NI_MABase.lvlib).
Using the .lvproj file, build the project as an .llb.   The result is "sines.llb" which needs to be placed in the lvinstruments folder C:\Program Files\National Instruments\Circuit Design Suite 10.1\lvinstruments...
See if you can run this VI and then try to build the .llb with my same source VIs and let me know the results.
Best Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Attachments:
SimpleOutputInstrument.lvproj ‏4 KB
SimpleOutputInstrument.llb ‏74 KB
sines.llb ‏74 KB

WL Server 6.1 - Virtual Directory

We are using WL Server 6.1 on Win2k. We want to set up a virtual directory
          for our web application.
          For example: we want to store images in the directory c:/siteimages. In the
          JSP's, we should be able to call <img src"/images/image.gif">. The "images"
          directory will be virtually mapped to the c:/siteimages directory. These
          images cannot be part of a 'war' file because they are created dynamically.
          Is this possible?
          Platform: BEA Weblogic Server 6.1 on WIN2K
          Thank you
          Ariel


I suggest that you create a simple webapp called images.war that has a
          web.xml descriptor that has entries like:
          <servlet>
          <servlet-name>images</servlet-name>
          <servlet-class>weblogic.servlet.FileServlet</servlet-class>
          <init-param>
          <param-name>docHome</param-name>
          <param-value>c:\siteimages</param-value>
          </init-param>
          </servlet>
          <servlet-mapping>
          <servlet-name>images</servlet-name>
          <url-pattern>*.jpg</url-pattern>
          </servlet-mapping>
          <servlet-mapping>
          <servlet-name>images</servlet-name>
          <url-pattern>*.gif</url-pattern>
          </servlet-mapping>
          Sam
          "Ariel" <[email protected]> wrote in message
          news:3b7d7b02$[email protected]..
          > We are using WL Server 6.1 on Win2k. We want to set up a virtual directory
          > for our web application.
          > For example: we want to store images in the directory c:/siteimages. In
          the
          > JSP's, we should be able to call <img src"/images/image.gif">. The
          "images"
          > directory will be virtually mapped to the c:/siteimages directory. These
          > images cannot be part of a 'war' file because they are created
          dynamically.
          > Is this possible?
          >
          > Platform: BEA Weblogic Server 6.1 on WIN2K
          >
          > Thank you
          > Ariel
          >
          >
          >

Virtual Directory for NDES server missing on IIS

Similar Messages

Maybe you are looking for