Virtual directory misconfigured

Exchange server path to kerbauth.dll is wrong / Powershell virtual directory is misconfigured. How to re-created virtual directory for Powershell on affected server.
Thanks for ypour replies.
Treat as urgent.

Hi,
Please run the following commands one by one to recreate PowerShell virtual directory.
Get-PowerShellVirtualDirectory -Server <AffectedServer> | Remove-PowerShellVirtualDirectory
New-PowerShellVirtualDirectory -Server <AffectedServer> -Name PowerShell
Get-PowerShellVirtualDirectory -Server <AffectedServer> | Set-PowerShellVirtualDirectory -BasicAuthentication:$false
IISReset
After PowerShell virtual directory re-creation, please check its modules in IIS and made sure that Kerberos module is native and the path to its DLL is correct.
Best Regards.

Similar Messages

How Create Virtual Directory On Oracle Application Server 10g on RHEL 5

Dear Sir
i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
/treas/temp
now i simply have to open these text based reports on web browser
WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
but for that i need to create virtual directory name : " /pcreport " without code
kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
<virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
kindlly help

(My paths shown, yours will be different)
In a text editor :
/u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
Add
Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
<Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Create the pcreport directory.
Add a simple test page
vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
<html>
<head>
<title>Simple test page </title>
<style type="text/css">
body {
margin-left: 20%;;
margin-right: 20%;
border: 1px dotted gray;
padding: 10px 10px 10px 10px;
</style>
</head>
<body>
<p>test!</p>
</body>
</html>
Test
http://yourserver.com:7777/pcreport/test.html
Best Regards
mseberg

Creation of virtual directory for EPMA during 11.1.2.2 configuration

Hi Experts,
I was trying to install and configure the EPM 11.1.2.2 products on a POC machine with Windows 2008 R2. I was able to install and configure some products and i was facing issue with the EPMA configuration where it struck during "Creation of EPMA virtual Directory". I can see the virtual directory created but not sure why this is not finishing up and just struck at this level, deployment is all fine. Attached the config log for any reference
I have enabled Windows authentication in IIS 7 and disabled Basic authentication
Please let me know if anyone has come across this issue and thanks for your help
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01496] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] IIS version is 7
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01516] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Removing virtual directory: hyperion-bpma-server
[2012-11-14T11:33:51.278-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: removeVirtualDir
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01508] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating virtual directory: hyperion-bpma-server(2:2), configRoot: C:\OracleEPM\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer\WebService
[2012-11-14T11:33:52.729-08:00] [EPMCFG] [TRACE] [EPMCFG-01504] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Creating application pool: DefaultAppPool
[2012-11-14T11:33:52.745-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createApplicationPool
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: Updating .Net version of application pool...
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] trace: .Net version v2.0 will be used
[2012-11-14T11:33:56.769-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: updateApplicationPoolManagedRuntime
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01510] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Using default application pool for hyperion-bpma-server
[2012-11-14T11:33:58.142-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: createVirtualDir
[2012-11-14T11:34:00.997-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: installAspDotNet
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:02.573-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:04.008-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01499] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Going to allow Web Service Extension.
[2012-11-14T11:34:05.552-08:00] [EPMCFG] [TRACE] [EPMCFG-01427] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] Executing target: enableWebServiceExtension
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01500] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.config.ant.iis.IISConfigurator] Web Service Extension allowing complete.
[2012-11-14T11:34:07.050-08:00] [EPMCFG] [TRACE] [EPMCFG-07380] [oracle.EPMCFG] [tid: 23] [ecid: 0000Jg0PMStFw005zzL6iW1Gcyyx000005,0] [SRC_CLASS: com.hyperion.cis.utils.os.windows.IisUtils] Getting IIS7 Default site name
Regards

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

How to set up a virtual directory on Application Server

The environment of my application is Application server 9i version 2, on windows 2000, form 9.0.2.
I am trying to get the ORACLE 9i forms show_document to work.
I have successfully created an out file in the server directory.
I need the document to be displayed by the form.
Let me tell you more about my server.
I installed Oracle application server on drive E.
I copied my application to drive E and named PY which has 4 folders including :
E:\PY\fmb (for fmb)
E:\PY\forms (for fmx)
E:\PY\sql (for sql programs)
E:\PY\locrep (for lst files which are generated from sql programs)
Someone told me I should create a virtual directory, e.g. docs, in your httpd.conf file to point to e:\py\locrep
I've seen 4 httpd.conf files so I don't know which one I should modify and what should I type in exactly on what part ????
E:\ora9ias\apache\apache\conf\httpd.conf
E:\ora9ias\apache\apache\conf\httpd.conf.default
E:\ora9ias\apache\apache\conf\httpd.conf.smibak
E:\ora9ias\dcm\config\plugins\apache\httpd.conf
After I modify the httpd.conf file, so what will my URL be ? Also, I have a lot of reports, I would like to run different reports at the same time ??????
Thank you very much.
Trang

The best way to edit httpd.conf is using Enterprise Manager Website. Open this site (http://machine:1810) and drill down on your application server, and then on HTTP Server. Open link Advanced server Properties. Now you see a list of all configuration files. Click on a file to open it.
To add the virtual path:
- You could best add your virtual path in file forms90.conf (it is included in httpd.conf with the <include> tag).
- Within this file you already find some virtual path definitions: Look for the AliasMatch tag, e.g. for the 'forms90/html' virtual directory.
- Copy this line and change 'html' into the directory name you like to use, e.g. 'myfiles'. Map it to the physical directory (on your E: drive) where your files are. (E: must not be a network drive, however).
- browse to your files using: http://machine:7777/forms90/myfiles/filename.
Peter

EMC Crash when i try to - reset client access virtual directory

Hi All,
I have one exchagne server 2010 sp3 rollup 7 installed on server 2012R2 Std.
When i try to reset client access virtual directory the MMC is crashing.
In the event viewer i can find 3 error after to crash:
1.
The program mmc.exe version 6.3.9600.17415 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 2360
Start Time: 01d04e7b531a4a0d
Termination Time: 4294967295
Application Path: C:\Windows\system32\mmc.exe
Report Id: 69db84d3-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
2.
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.OnThreadException(Exception e)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
3.
Faulting application name: mmc.exe, version: 6.3.9600.17415, time stamp: 0x54504e26
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17415, time stamp: 0x54505737
Exception code: 0xe0434352
Fault offset: 0x0000000000008b9c
Faulting process id: 0x2014
Faulting application start time: 0x01d04e9e432feaef
Faulting application path: C:\Windows\system32\mmc.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: b8276755-ba91-11e4-80c3-0050569b5787
Faulting package full name:
Faulting package-relative application ID:
When i try to preform the task from EMC that installed on my PC (Win 7 SP1 x64) everything works fine
Thank you.

Hi Eliran,
Thank you for your question.
Are there any update recently?
We could refer to the following steps to troubleshoot:
1)disable A/V
2) Run: DISM.exe /Online /Cleanup-image /Restorehealth
http://support.microsoft.com/kb/947821/en-gb
3) follow http://support.microsoft.com/kb/929833/en-gb to upload %WinDir%\Logs\CBS\CBS.log
4) disable snap-ins exept DNS-snapin
5) run SDP
6) enable A/V
We could also re-install .Net 4.0 to check if the issue persist by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=17718
If the issue persist, we could install Exchange 2010 SP3 CU8 by the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=45225
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

Use of AppSet virtual directory in BPC70MS

We are running OutlookSoft CPM 4.2 and using appset virtual directory directly.
The appset virtual directory is created by default in OutlookSoft CPM 4.2.
For example:
- Open input schedule through the virtual directory by Workbook.Add method from another input schedule.
- Save some kinds of data through the virtual directory by Workbook.SaveAs method.
However, there is no appset virtual directory in BPC 7.0 MS by default.
Therefore we have created the virtual directory by hand.
It seems that the virtual directory works fine when the client is Windows XP.
But there is a problem when the client is Windows Vista.
When we access the input schedule directly from the virtual directory,
the authentication dialog box appears for the first time in the Excel session.
We would like to omit the authentication dialog box because it is annoying for users.
Does anyone have some idea to solve this problem?

Using a virtual directory outside of osoft that's means you are not longer into SAP BPC.
So the authentication in that case it pure IIS authentication.
IIS authentication is Intergrated Windows authentication (using windows credential for login) or Basic authentication.
You are using IE for connection to IIS which means you have also security setttings from IE.
For example you have the setting for security that "prompt always user name and pwd" into IE.
Tools- Internet Option- Security
Click what kind of site it is your site: Intranet, or trusted site or Internet. and after that click to Custom Level and go to User Authentication.
If there is prompt user name and pwd then for sure every time when you will access any site (from coresponding group. Internet, Intranet or trusted sites) you will be always asked to input user name and pwd.
So first level of authentication for BPC is IE and IIS authetntication. In your case you don't pass this level of authetication.
I hope this will help.
Again it is not a good practice to have virtual directory outside of OSOFT. When you will do a transport into other enviroment it will represent again an issue.
Regards
Sorin Radulescu

How can I use a relative path in a Virtual Directory tag?

That is probably a bit vague, so I will explain in more detail. We are using BEA
WL Portal 7.0 and our team is developing multiple portal applications. We have
a core set of portlets (consist of JSPs) that we need to reuse in multiple portals
(Web Apps), however from a version control perspective they need to reside in
one common location. So, the solution I came up with is to use a virtual directory
for the the common directory and add this to weblogic.xml for each web app. This
works fine. However, each developer has different directory names for their project...ClearCase
view names to be specific... plus we have integration views, QA views, etc...
so we can't have any "C:\mystuff\mydomain" absolute paths anywhere in the portal
configuration. Does anyone know of a way to use a relative path for a virtual
directory? I have tried various versions of ../../ for example to try to backup
and then recurse down to the directory, but this is not working. Any ideas?
By the way this is basially just a hack for development, when we package the WAR
for QA, Prod, etc... we copy needed files and there are no virtual directories.
In other words, I don't care how "creative" solution is :)
This is what I have right now, which I need to replace with a relative directory
name:
<virtual-directory-mapping>
<local-path>C:/Projects/TouchPoint_v1.0_Fix/tp_portal/bipiportals/beaApps/portalApp/tp-shared</local-path>
<url-pattern>*</url-pattern>
</virtual-directory-mapping>

Well, in fact you can in a special case :
- The file you want to access is in the same directory than the applet (or in a sub-directory)
If this condition is OK, you can open the file using :
java.io.InputStream MyInputStream = <YourAppletClassName>.class.getResourceAsStream("sidira_interactif2.svg")
With this stream, its easy to read the file content.

How to define a virtual directory for 1virtual server?

Hi there,
The last part is always the hardest. I succesfully converted my Apache configuration to the SunONE setup but one section and I fail to grasp where I'm going wrong...
SunONE Webserver 6.1SP5, I have quite a few virtual servers divided over several virtual classes. And now I'm trying to configure a 'virtual directory' (pfx2dir nametrans) limited to a single virtual server but no matter what I try I can't get it to work...
In the administration guide I read about the NameTrans directive and how it should be used in the default object (in obj.conf ofcourse). So when I have something like this all works as it should, but for all virtual servers in the class:
<Object name="default">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Object>So when reading up even more I came across the NSAPI programmers guide which explained that you can have both <Object> and <Client> tags. Because of the 'urlhost' parameter with the Client tag I figured that it should be possible to limit the NameTrans line mentioned above to but one virtual server:
<Client urlhost="catslair.intranet.lan">
NameTrans fn="pfx2dir" from="/files" dir="/opt/websites/catslair/data"
</Client>But whenever I use this approach the server refuses to start and presents me with an error:
[13/May/2006:16:38:10] config (19621): CORE3185: Invalid configuration: File /usr/local/sun/SUNWwbsvr/https-magi.intranet.lan/config/server.xml, line 178, column 99: HTTP3258: Error processing Mirrors.obj.conf line 51: HTTP2215: directive outside objectAt first I didn't understand exactly what it meant, I even stumbled upon a bug report which triggered the same error (http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4979377) but after reading up on this I can only conclude that NameTrans can only be used within an <Object> block. The manuals also hint into this direction since it becomes obvious that the preffered approach is using this in the default object.
So picture my surprise when I came across http://docs.sun.com/source/817-6252/npgobjcn.html#wp1041206 in the NSAPI programmers guide, its past the table. One of the examples shows this approach:
<Client odds="25%">
NameTrans fn="redirect" from="/Pogues" url-prefix="http://pogues.example.com"
</Client>Because I was sure about urlhost being a parameter for the Client tag I tried copying the above example, but when I give it a try I'm once again greeted with the error I mentioned earlier "directive outside object".
So can anyone please point me in the right direction? Is it possible to setup a virtual directory for a single virtual server and if so how do I proceed since <Client> doesn't seem to work. thanks in advance for any tips you can give me.
Message was edited by:
Lion-O

Thanks a lot for the example, that fixed the problem.
I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening.

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

How do I create a virtual directory in Snow Leopard Server Admin program?

Hi, how do you use the server admin program in snow leopard server to create an apache virtual directory? I can't see it in the applet anywhere. Thank you.

Well this is what I thought too but I don't think I'm doing something right. I have a default website on port 80 and I created a second site on the same port. They are two different websites. One is the initial one that comes stock with the osx. The second one I created.
When I browse to my server I get the second site. How can I get the default to be the one that points to the mail, wiki, calendar stuff, while my second domain is something totally different.
http://myserver (should be the default stuff like mail.)
http://myserver/mysecondsite (should be my other stuff.)
The problem is that when I go to http://myserver it is going to http://myserver/mysecondsite
What am I doing wrong? Thank you.

Oracle Virtual Directory 10.1.4.0.1 installation on SUSE SLES10

I am attempting to install Oracle Virtual Directory version 10.1.4.0.1 on a brand new SUSE SLES10 Linux server. The installation fails due to missing libraries. This is true whether using the GUI or the console installation. The same set of binaries installs fine on a SLES8 and a SLES9 server.
The OVD 10.1.4.0.1 release notes and certification guide indicate that SLES10 is a supported platform. However, I cannot get the installer to work.
Following is the output and the error messages generated by the installer:
*** output start ***
# ./ovid1014.bin -i console
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.11813/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
*** output end ***
I verified that the libraries listed above are installed as part of the glibc package. The following glibc packages are installed:
glibc-2.4-31.2
glibc-devel-2.4-31.2
glibc-i18ndata-2.4-31.2
glibc-locale-2.4-31.2
Does anybody know why this is failing? Thanks in advance for your help.

Here is the reply that I received from Oracle Support. The proposed workaround worked in my case. I am posting it here so that it may help others.
Workaround
===========
1.) cp ovid1014.bin ovid1014.bin.bak
2.) cat ovid1014.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" > ovid1014.bin
3) run the modified installer: ./ovid1014.bin
Note: 417016.1 "error while loading shared libraries during OVD install" was created to document the issue.

SMS_MP_CONTROL_MANAGER Failed to create the CCM_Incoming Virtual Directory

Hello -
I'm hoping someone could help me with this problem. I've searched so many websites trying to resolve this issue and it seems no matter what I try I keep getting the same error message.
I've followed the steps in setting up SCCM 07 from this web site which was very nicely done! I've also followed the directions on Microsofts Tech Net website on how to configure WebDav and IIS settings.
I'm working on a Virtual Windows Server 2008 32-bit OS, SP2, SCCM 07 SP2, IIS7
Here is the message I get in the log files:
Message ID: 4963
Process ID: 4364
Thread ID: 7996
Componet: SMS_MP_CONTROL_MANAGER
MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory.
Possible cause: The IIS IWAM account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IWAM account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The IIS IUSR account has expired, been disabled, or has invalid or too restrictive logon hours. You may verify this information by running the net user command line for the IUSR account. (i.e.: "net user IWAMMachineName)
Solution: Use the output to verify that the account is enabled, and logon is possible during the time of installation. Note: You can use "net user" to modify the account properties.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
I could be completely wrong but I read somewhere that with the latest version of IIS doesn't install these user accounts. I checked to see if those accounts existed and they didn't.
I've tried what this one website mentioned:
http://myitforum.com...-directory.aspx
- Remove the MP role from the Site Server. Watch the MPSetup.log to ensure that the removal is complete.
- Uninstall the IIS component from the OS of the Site Server.
- Reboot the Site Server.
- Run ccmdelcert.exe from the SMS Toolkit.
- Reinstall the IIS component (with BITS) on the OS of the Site Server.
- Go into the IIS manager and allow WebDav.
- Add the MP role to the Site Server. Watch the MPSetup.log to ensure that the installation completes correctly.
These steps didn't seem to work, probably because it was for SMS 2003.
Here is the MPmsi log file:
<11-24-2009 17:39:28> SMSMP Setup Started....
<11-24-2009 17:39:28> Parameters: C:\PROGRA~1\MICROS~3\bin\i386\ROLESE~1.EXE /install /siteserver:DELGADO SMSMP
<11-24-2009 17:39:28> Installing Pre Reqs for SMSMP
<11-24-2009 17:39:28> ======== Installing Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:28> Found 1 Pre Reqs for Role SMSMP
<11-24-2009 17:39:28> Pre Req MSXML60 found.
<11-24-2009 17:39:28> No versions of MSXML60 are installed. Would install new MSXML60.
<11-24-2009 17:39:28> Enabling MSI logging. msxml6.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<11-24-2009 17:39:28> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<11-24-2009 17:39:30> msxml6.msi exited with return code: 0
<11-24-2009 17:39:30> msxml6.msi Installation was successful.
<11-24-2009 17:39:30> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<11-24-2009 17:39:30> Installing the SMSMP
<11-24-2009 17:39:30> Passed OS version check.
<11-24-2009 17:39:30> IIS Service is installed.
<11-24-2009 17:39:30> checking WebDAV configuraitons
<11-24-2009 17:39:30> WebDAV is configured
<11-24-2009 17:39:30> No versions of SMSMP are installed. Installing new SMSMP.
<11-24-2009 17:39:30> Enabling MSI logging. mp.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<11-24-2009 17:39:30> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\mp.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" CCMSERVERDATAROOT="C:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<11-24-2009 17:40:24> mp.msi exited with return code: 1603
<11-24-2009 17:40:24> Backing up C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to C:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<11-24-2009 17:40:24> Fatal MSI Error - mp.msi could not be installed.
Component Services (DCOMCNFG) is running properly, no error messages when I was browsing around.
Any advice would be greatly appricated!
Thanks!

Just read the post below
http://social.technet.microsoft.com/Forums/en-AU/configmgrswdist/thread/5638cdf2-09d3-4750-995e-ae60973e86b8
<Remember to copy tasks from task scheduler to some different location because it gets wiped off in process)
Imp. Note: Running ccmclean /all on SCCM is one of these unsupported things.
Remove the MP as a site system role (if it is still installed), wait for it to finish
2.
Remove IIS completely
4.
Reboot
5.
Stop the Task Scheduler Service
6.
Rename the %windir%\Tasks folder to something else (or move it)
7.
Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
8.
Optional: Enable auditing on the \inetpub\wwwroot folder (and subfolders). Make sure to set local security policy to trap failures of file access. We will need this in case we see
the same security failure.
9.
Reinstall IIS, BITS, WebDAV
10.
Insure BITS and WebDAV are enabled
11.
Reinstall the MP
Server Engineer

DR within Same Site Using Different Virtual Directory Names

We are deploying Exchange 2013 and have setup a set of 2013 servers in a different building we would like to use for DR.
We have 2 servers in our main datacenter behind a load balancer and 2 servers in a 2nd datacenter within the same DAG. So mailbox databases are already on the servers. However for the CAS role, we are looking at just setting the DR servers to
have different virtual directory names so in a DR situation, we just need to tell people to access owadr.domain.com instead of owa.domain.com. The DR servers would be behind a 2nd load balancer only configured to talk to those two servers.
Both of these datacenters are in the same AD site, and the network vLANS are stretched across each datacenter so DAG replication is already working. The primary serves are already working behind the production load balancer. Just need to make
sure we are going in the right direction for the DR setup. Our public certificate already names the names of owa.domain.com, owadr.domain.com, and autodiscover.domain.com on the cert. We are not really concerned so much with Outlook/ActiveSync
traffic in a DR situation, but would just like OWA to be a temporary solution while the main datacenter recovers. So a different virtual directory name should work right?

Hi,
From your description, I know four servers are in the same site but with different building. So you create two load balancer. And it seems you add the DAG members into Load Balancer. Could you confirm if you use WNLB?
In fact, WNLB can't be used on Exchange servers where mailbox DAGs are also being used because WNLB is incompatible with Windows failover clustering. If you're using an Exchange 2013 DAG and you want to use WNLB, you need to have the Client Access server
role and the Mailbox server role running on separate servers. See more details in the following link:
http://technet.microsoft.com/en-us/library/jj898588(v=exchg.150).aspx.For
For your environment, I have a suggestion: we can deploy two servers with only CAS role installed. One cas in one datacenter. Put them in one Load Balancer. Point OWA URL to this load balancer. So when one datacenter is down, the request will
go to anoter CAS in another datacenter. And the OWA URL is not changed..
But if you want to use two OWA URLs for each datacenter. owa.domain.com and owadr.domain.com. You can set OWA internal URL and external url on CAS servers in DR site to use owadr.domain.com. And ask users to login
https://owadr.domain.com/owa instead of
https://owa.domain.com/owa when the primary datacenter is down.
Sent By
Silver

Creation of Virtual Directory in weblogic.xml (OBIEE11 Weblogic)

We are using OBIEE 11.1.1.6.4, we want to create a Virtual directory mapping in weblogic server so that we can place our static image files to access from the application URL.
To do this activity, we have performed following steps -
1) Navigated to C:\OBIEE11G\Oracle_BI1\bifoundation\jee
2) Open analytics.ear file
3) Existing code in weblogic.xml is: (if weblogic.xml is not present we need to create the file with below code)
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
</weblogic-web-app>
4) We have added virtual-directory-mapping tag; After adding virtual directory mapping tag, the code in weblogic.xml is
<?xml version = '1.0' encoding = 'US-ASCII'?>
<weblogic-web-app xmlns="http://xmlns.oracle.com/weblogic/weblogic-web-app">
<session-descriptor>
<cookie-path>/analytics</cookie-path>
</session-descriptor>
<virtual-directory-mapping>
<local-path>D:/virtualdirectory</local-path>
<url-pattern>/images/*</url-pattern>
<url-pattern>*.jpeg</url-pattern>
</virtual-directory-mapping>
</weblogic-web-app>
5) We have created a folder virtualdirectory under D: drive. And then created a folder images within folder virtualdirectory.
6) Then we have placed an image (lets say) test.jpeg within image folder.
7) Restarted all BI services,
8) Now when we try to access URL http://localhost:9704/analytics/images/test.gif. Now we are able to see the image, it’s working perfectly fine.
If we paste the above URL in browser it will automatically displays the image without any authentication. So our requirement is, on pasting the URL in browser first it should redirect to OBIEE homepage and when authentication is done then it should display the image.
Request you to please advise with your inputs.

Why did you modify analytics.ear ?
Should'nt you make changes here : Middleware_Home>\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1
\analyticsRes\WEB_INF\web.xml
Follow this note : OBIEE 11g: How To Access Custom Files Through URL By Creating Virtual Directory In Weblogic Server? [ID 1408240.1]
And you should be able to deploy that virtual directory and access it after authentication.
HTH,
SVS

Virtual directory mapping in weblogic 7.0

I'm trying to define a virtual mapping in my web application deployed in Weblogic
7.0 sp2 and it's not working.
I've defined in my weblogic.xml
<virtual-directory-mapping>
<local-path>c:/cursoBEA/imagenes</local-path>
<url-pattern>/imagenes/*</url-pattern>
<url-pattern>*.gif</url-pattern>
</virtual-directory-mapping>
But when I try to access my images like this:
<img src="/mywebapp/imagenes/image.gif">
it cannot show that image.
We've tried many combinations, but all failed. What are we doing wrong?

I'm doing the same as you, and it does not work. I'm using weblogic 7.0 sp2 in
a Windows 2000 Proffesional. Maybe it's a problem with weblogic/OS version?
Ignacio Sanchez
"Mark Griffith" <[email protected]> wrote:
You can look at 8.1 Medrec example
On my install it lives here:
c:/bea/wls81/weblogic81/samples/server/medrec/src/physicianEar/physicianWebA
pp/WEB-INF/weblogic.xml
Virtual Directory is used as follows:
<virtual-directory-mapping>
<local-path>C:/bea/wls81/weblogic81/samples/server/medrec/src/common/web</lo
cal-path>
<url-pattern>images/*</url-pattern>
</virtual-directory-mapping>
ls of C:/bea/wls81/weblogic81/samples/server/medrec/src/common/web
total 3
drwxrwxrwx 1 Everyone Everyone 0 Apr 6 14:43 .
drwxrwxrwx 1 Everyone Everyone 0 Apr 6 14:43 ..
-rwxrwxrwa 1 Everyone Everyone 1378 Apr 6 14:43
build.xml
drwxrwxrwx 1 Everyone Everyone 0 Apr 6 14:43 com
drwxrwxrwx 1 Everyone Everyone 0 Apr 6 14:43 images
URL's in a web-app's index.jsp that is in the root of the webapp are
like:
<TD align=right><IMG SRC='images/logo.gif'></TD>
Looks like you need to modify your local-path to not include imagenes
Cheers
mbg
"Ignacio Sanchez" <[email protected]> wrote in message
news:3ec20fff$[email protected]..
I'm trying to define a virtual mapping in my web application deployedin
Weblogic
7.0 sp2 and it's not working.
I've defined in my weblogic.xml
<virtual-directory-mapping>
<local-path>c:/cursoBEA/imagenes</local-path>
<url-pattern>/imagenes/*</url-pattern>
<url-pattern>*.gif</url-pattern>
</virtual-directory-mapping>
But when I try to access my images like this:
<img src="/mywebapp/imagenes/image.gif">
it cannot show that image.
We've tried many combinations, but all failed. What are we doing wrong?

Virtual directory misconfigured

Similar Messages

Maybe you are looking for