Virtual-directory, not working

Hi,
In my servlet I wirte a reference to an image as <img src="/pictures/logo.gif">
I have created a directory C:\pictures and put all images here. In global-web-application.xml, I add a virtual directory mapping as,
<virtual-directory real-path="C:\pictures" virtual-path="/pictures"/>
But when I access the servlet, the images are missing. I tried by putting the code in orion-web.xml, but still no luck. Please help and thanks in advance.
Jinoy

I tested with 9.0.2 and seems to be working fine.
Following are my contents in orion-web.xml:
<virtual-directory real-path="d:\nistha" virtual-path="/pictures"/>
Code Snippet from Servlet:
out.println("<img src=\"/pictures/durga.jpg\">");
regards
Debu

Similar Messages

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20: <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21: </httpHandlers>
Line 22: <authentication mode="Forms">
Line 23: <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24: </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

When setting up converged network in VMM cluster and live migration virtual nics not working

Hello Everyone,
I am having issues setting up converged network in VMM. I have been working with MS engineers to no avail. I am very surprised with the expertise of the MS engineers. They had no idea what a converged network even was. I had way more
experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
Everyone including our consultants says my setup is correct.
What I want to do:
I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters. I have created all my logical networks, port profile with the uplink defined as team and
networks selected. Created logical switch and associated portprofle. When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well. Problem is that the cluster and live
migration virtual nics do not work. The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct. However nics do not work at all.
I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM. I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
switch.
I am really losing faith in VMM fast.
Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
Thanks

Have you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
Are you using static IP address assignment for those vNICs?
Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration.
The details should be all in this whitepaper.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.

Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Absolute links on hml page in local directory not working

All the absolute links on my html pages (which are on my hardrive) are being treated as local links and are therefore not working - i.e. Firefox is adding the local file path before the url. For example, the original link is: http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article
But Firefox is adding the directory path so the url string becomes: /www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article%E2%80%9D
It is also being appended with: %E2%80%9D (which, when tested from a Word page, leads to site but generates page not found error).
For testing purposes, is there any way I can reconfigure Firefox to parse my links as absolute?
Many thanks

Thanks, both. I have carried out cor-el's suggestion of replacing the smart quotes with dumb quotes, then tried viewing link on file again using different encoading, including UTF-16 - same result as before.
Below I've set the HTML of the whole page, as per yalam96's request (it includes cor-el's suggested fix to the "prosecute" link):
<pre><nowiki><h3>Who do you need to inform (in the UK)?</h3>
If you have a mortgage, you will need to inform your provider (with most lenders this shouldn't be an issue – you do not need “consent to let” as you would if you were letting out the whole property) but you do still need to inform them; why? This is partly for the protection of your lodger, if you should default on the mortgage or die, but mostly for your own protection – if the property was destroyed or badly damaged because of the negligence of your lodger.
If own your property and it's leasehold, check the lease – you may need permission from the freeholder.
If you rent your property, you will need to firstly check with your landlord (this applies whether you rent privately or from a public landlord – Local Authority or Housing Association), and get their permission in writing, just as you would with a mortgage provider. Incidently, in the UK, a public landlord is only likely to object to the let if moving a lodger in would mean your home becomes over crowded (e.g. you have a two bed flat and your children would have to share your bedroom). They will also object – they might even <a href=”http://www.insidehousing.co.uk/legal/criminal-conviction-for-illegally-subletting-tenant/6518844.article">prosecute</a> - if you move out and let the whole property to the “lodger” (who wouldn't be a lodger in that case, but a full tenant, with full tenant's rights).
You may also need to cancel any existing residential home insurance and take out <a href=”http://www.landlordinsurance.biz/landlord-insurance-guides/landlord-insurance-faq/”>landlord insurance</a>. A few residential policies will, however, allow lodgers. Landlord insurance will not cover the lodger's possessions, they will need to get their own insurance, known as Tenant Insurance – policies can be compared on sites such as <a href=”http://www.confused.com/campaign/home-insurance/tenants-content-insurance?MediaCode=1054&kw=lodger+contents+insurance+broad&gclid=CPbbn9-Nj7MCFanItAod3GAAog”>confused.com</a>
If you get a single occupier's discount on your council tax, you will need to inform your local authority, unless your lodger is <a href=”https://www.gov.uk/council-tax/council-tax-exemptions”>exempt</a> from paying council tax (e.g. they're a university student).
NB People claiming Jobseeker's Allowance and most other benefit claimants are not exempt – they are, however, usually entitled to Council Tax Benefit to help with some or all the cost of their council tax.
If you're letting on a Monday – Friday basis (to someone who only needs a week night let), this person would not normally pay council tax at your property, as they already pay against their main (family) home. However, if for whatever reason you and your Monday – Friday lodger decided that they would use your address as their main home, they would then become liable to pay council tax at your address and you would lose any single occupier's discount.
If you claim any kind of means tested benefit (such as job seeker's allowance, housing benefit or council tax benefit) as benefit rules currently stand (January 2013) your rental income will affect this. Contribution based Job Seeker's allowance (JSA(C)) will be affected if your weekly rental income exceeds £50. If you're on income based jobseeker's allowance (JSA(I)), it's very likely to be affected; however, to what extent will depend on your rental earnings and circumstances and a DWP adjudicator will decide this.
However, from October 2013, when Universal Credit takes effect in the UK, <a href=”http://www.insidehousing.co.uk/tenancies/lodger-rules-to-ease-impact-of-bedroom-tax/6522846.article?MsgId=57059”>a public housing tenant's income from renting a room will no longer affect their benefit entitlement.</a></nowiki></pre>

First virtual console not working

I currently have semi-set my arch linux system, the only problem i'm having is that none of the virtual consoles are working. When i hit ctrl-alt-f1, all my monitor displays is "video mode not compatible".
Last edited by dozerismydogsname (2010-02-15 04:02:10)

grey wrote:Are you using a login manager?
Yea i was using gdm, i don't know what i did, but it seems to work just fine now.

PC Suite with virtualized Windows NOT working

PC Suite (6.83.14.1) is not working with a vitualized OS, i tested it with
Linux (Ununtu) 7.10 as Host OS
VirtualBox 1.5.6 with USB support
Guest (virtualized) OS tried: Windows 2000, XP Sp2/3 and Vista sp1
The phone (nokia N73) connected bij USB is recognized, the modem is working, but wen connecting the phone it comes with an error:
"PC Suite does not recognise the connected phone. The connection between the PC and the phone failed, error code 0x80044403. Switch off your phone, switch it on, and try again."
in Windows management the phone is recognized, correctly
as "Nokia N73 USB Phone Parent" and below that device:
- Nokia N73 as: COM3, Generic, Modem, en 2 OBEX devices.
also below "Ports" the phone is visible as USB(COM3)
Al (!) my other USB devices like USB stick's USB-DVD-recorder are working fine.
also Windows CE-devices, like a Navman (Windows CE), connected by Microsoft activesync are working perfect.
PC Suite is necessary to run firmware upgrades!
So, it lookes likes a PC Suite problem, while everything is functioning except PC Suite.
Message Edited by rolandbreedveld on 27-Mar-2008 12:11 PM

PC Suite ver 7.0 is NOT working with virtualised OS. I have tested on OpenSuse 11.0 as HOST OS with SUN xVM VirtualBox Graphical User Interface 2.0.2 with USB Support enabled. The Virtualised OS is Windows XP with all Service Packs / Windows updates loaded.
The Phone E90 Communicator is connected via USB
In Windows management the Phone is recognised as Wireless Communication Devices --> Nokia E90 Communicator USB Phone Parent.
When connecting the Phone it shows an error:
"PC Suite does not recognise the connected phone. The connection between the PC and the phone failed, error code 0x80044403. Switch off your phone, switch it on, and try again."
PC Suite is required to backup the phone, etc so that I can use the E90 in Virtualised Windows on OpenSuse 11.0.
Would Love to have this working. Hate using Windows only to access the Phone since OpenSuse 11.0 is my primary OS. I will have to reboot the system, select Windows XP if all I have to use Windows XP is for accessing the Phone.
Appreciate a revert at the earliest.
Live every day like it is your last.
You have only 1 lifetime , NO matter what different religions tell you. DO good in all that you do.

[Solved] Arch and virtual networking, not working as planned.

Running pfSense trough virtualbox, running virtual machines behind it.
What setup do I need, to get wireless LAN solely to pfSense. Currently I use the bridged setup in virtualbox as the WAN side. LAN is a host only adapter vboxnet0, all other VM's connect through that virtual adapter.
I would like to use a second host only adapter on a different subnet, but, once I create the adapter vboxnet1 and add it as second LAN card OPT1 to pfSense, internet stops working on the first LAN, though I can still ping google from the pfSense box.
How do I get Arch to not use the wireless connection but only the second host only adapter.
At the moment I use NetworkManager for the network.
Current setup (working):
Router – 192.168.1.1
Arch bare hardware, main OS – 192.168.1.9 (wireless)
pfSense WAN - 192.168.1.12 ( through wireless)
pfSense LAN - 10.10.2.1
host only adapter vboxnet0 - 10.10.2.3
I would like to add (not working):
pfSense OPT1 - 10.10.10.1
host only adapter vboxnet1 - 10.10.10.3
But this fails for unknown reasons.
What do I miss, or should I do different, thanks in advance, Mark
Last edited by qinohe (2015-01-30 12:39:32)

All is working well. I extended to four virtual adapters, one for the Arch host, and a wireless AP connected to eth0, bridged to pfSense. All applications on the host are finding the pfSense squid proxy, I have libproxy installed. Set the default gateway on the host to be the proxy of pfSense.
Now I can use my laptop to connect to insecure networks while not belonging to it, and host for friends at the same time, very nice

N900 virtual keyboard not working

please help
i cant use the virtual keyboard any more
i tried to disable and enable (not working)
i tried to restore setting (not working)
i restore to backup point ( nothing)
please help any ideas.
thank you

have you tried turning off and back on?
You could try this test to make sure the keyboard sensor is working.. the virtual keyboard will only work if the physical keyboard is closed.. if the sensor is broken, it might not know the keyboard is actually closed..
Open this link on your phone
http://chris.intrepid.cx/N900/fix
Click on the FIRST LINK ONLY.. select open and install the package..
Now open an x terminal and type these two commands
sudo gainroot
cat /proc/kmsg
Now try opening and closing the keyboard.. Make sure it says:
slide (GPIO 71) is now open
when the keyboard is fully opened and says:
slide (GPIO 71) is now closed
just as you start to close the keyboard

Leopard Client Tiger server mobile home directory not working... hmmm

Mobile home directory is not working for my leopard clients with my tiger server.
I can log in via the Apple server account that is set for mobile.
On my tiger clients it prompts me to confirm my mobile account on log in and everything works fine if i unplug the network cable.
on my leopard clients no prompt at log in. so i go to account under system prefs and see that the account says mobile..and i click on make mobile account in the account pane in system prefs says will reboot and make account.. prompts for password for mobile account i put it in and then it says there was an error in making mobile account and then it takes me back to the main log in window.
every client i have on leopard does this...
am i missing something?
thanks in advance,
Jesse

Tiger server can control mobile account syncing and other features present on Tiger clients.
See this post for some more info on setting Leopard mobile account preferences on Tiger servers:
http://discussions.apple.com/thread.jspa?messageID=6829482&#6829482

Screen sharing mobile account (open directory) not working

Can anybody else verify that screen sharing, through Remote Management, does not work when trying to connect to mobile accounts on 10.7 Lion?
Please note, when I say through Remote Management, I mean that under System Prefs->Sharing->Screen Sharing is disabled but Remote Management is enabled. (Remote Management being able to provide it's own screen sharing)
Also I dont mean VNC... please make sure the "VNC viewers may control my screen with password" option is turned off under System Prefs->Sharing->Remote Management->Computer Settings

I can confirm this. Same experience here on a 10.7.2 Mac.
I get a "Please verify you have entered the correct name and password".
Does this work on 10.6? I'm unable to check at the moment.

Mouse pad virtual wheel not working in bookmarks menu

Hi,
My laptops mouse pad wheel does not work in the bookmarks menu. It works fine in any other application or on the main view in firefox. I'm not very organized and have hundreds of bookmarks, it's frustrating to have to wait for the up/down buttons in the bookmarks menu to scroll.
I've read https://support.mozilla.com/en-US/kb/Cannot+scroll+with+mouse+wheel+or+touchpad
which did not work.
Here are my specs. I won't dump the entire dxdiag, I'm sure there's a lot of redundant info. in it.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
System Information
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: NV53
BIOS: Ver 1.00PARTTBL]
Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
Memory: 4096MB RAM
Available OS Memory: 3838MB RAM
Page File: 1489MB used, 6185MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x1002, 0x4397
| Matching Device ID: usb\root_hub
| Service: usbhub
Gameport Devices
PS/2 Devices
+ Launch Manager
| Matching Device ID: *pnp0303
| Upper Filters: DKbFltr
| Service: i8042prt
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Alps Pointing-device
| Matching Device ID: *pnp0f13
| Upper Filters: ApfiltrService
| Service: i8042prt
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD

Maybe FCP 3 doesn't provide support for mouse wheel scrolling? I can't remember and I'm not going to install FCP 3 to test that theory.
You should be able to at least set the MS mouse driver to perform scroll wheel functions in FCP through the MS mouse preference pane (zoom in/out for example) but I don't know if that includes scrolling.

Virtual IE not working with different version of local IE

I built a virtual IE9 using the template (as Novell suggests). I needed it to support a web app that is only compatible with IE9. Our environment is IE11. The main problem is that you cannot view or download any files. The IE download manager box flashes and disappears. If you're opening up any pdf or MS Office file, the new tab in IE is blank (no file is viewed). Sometimes if you download anything, it will save to local Downloads folder, but does not auto-run. Also, you cannot change the "save as" directory, nothing comes up. This only happens when running the virtual IE9 on a machine that has local IE11. If the local IE is 9, then everything works. I've also tested and noticed this happens with any version of IE, it only works when the virtual IE version matches the local IE version. Which defeats the purpose of using virtual apps if you're running it on the same environment. Has anyone had any luck with this? Thanks in advance.

I'll throw my 2 cents in here. You may be experiencing what I did. I needed
to have a totally isolated IE11 for school testing purposes. I soon
discovered that the vapp of IE interacts with the local version??? Kind of
defeats the purpose. I opened an SR and it was confirmed that this is
expected behavior. After research I was given a document last week that
explains how to totally isolate IE form the desktop. My requirements were to
have the latest JAVA and flash and to absolutely not interact with the local
version due to inconsistencies across the school systems IE installs. I made
the new build and tested on a laptop with no flash and Java and it worked
fine with the changes to the registry settings of the vapp. Below are the
settings that support had me change. Not sure if you have done this but as
for the PDF issue did you create a pdf reader SVM and add that to your vapp?
I made a JAVA and Flash SVM and added those.
here are the settings to make sure your IE is totally isolated.
Isolate Host IE Add-ons
To completely isolate all host add-ons from the virtual version of IE it is
necessary to fully isolate the registry keys where the add-ons are
referenced.
Part 1: Remove the relevant keys from the IE configuration
Delete the following registry keys (if present) from the Spoon Studio
configuration for IE.
- [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
- [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
Part 2: Import the isolation registry keys
Import the attached registry file into the configuration
(isolate-ie-plugins.reg).
Part 3: Set the keys to full isolation
Set the following keys to full isolation.
- [HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
- [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
Part 4: Build and test the IE package
Build the Spoon Studio IE configuration and test it on a machine that has IE
plugins installer. Verify that the plugins are not loaded.
You need to make a reg file out of this and import it per above
instructions. Copy and paste it into a text file then change the extension
to .reg.
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Ext]
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Explorer\Browser
Helper Objects]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Ext]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Windows\CurrentVersion\Explorer\Browser
Helper Objects]
"katiefinn" wrote in message
news:[email protected]...
I built a virtual IE9 using the template (as Novell suggests). I needed
it to support a web app that is only compatible with IE9. Our
environment is IE11. The main problem is that you cannot view or
download any files. The IE download manager box flashes and disappears.
If you're opening up any pdf or MS Office file, the new tab in IE is
blank (no file is viewed). Sometimes if you download anything, it will
save to local Downloads folder, but does not auto-run. Also, you cannot
change the "save as" directory, nothing comes up. This only happens when
running the virtual IE9 on a machine that has local IE11. If the local
IE is 9, then everything works. I've also tested and noticed this
happens with any version of IE, it only works when the virtual IE
version matches the local IE version. Which defeats the purpose of using
virtual apps if you're running it on the same environment. Has anyone
had any luck with this? Thanks in advance.
katiefinn
katiefinn's Profile: https://forums.novell.com/member.php?userid=131771
View this thread: https://forums.novell.com/showthread.php?t=482841

Active Directory and Open Directory not working

I am experiencing an issue, or several issues that I can't figure out how to resolve.
I have an Active Directory domain set up (running 2003 server R2) and it is humming along quite nicely.
A few weeks ago I got a new XServe running 10.5.4. Booted it up, bound it to AD, and then set up and OD Master on it so that I could manage some new Macs that we have.
The Macs are bound to both directories.
The issue I have comes in when using Workgroup Manager, and trying to add AD user to OD groups. The groups drawer is open, but the little directory menu at the top of the drawer does not include the entry for Active Directory. I see Local, Search Policy, and /LDAPv3/127.0.0.1...
If I try to pull down the directory menu above the user list, I see the following: Loca, Search Policy, Other..., /Active Directory/All Domains, and /LDAPv3/127.0.0.1.
If I select /Active Directory/All Domains from that list I get the following error.
+Unable to open the requested node.+
+The node /Active Directory/All Domains couldn’t be opened because an unexpected error of type -14002 occurred.+
I think these issues are related, but I can find no help on the first item (AD not showing up in the groups menu)
and a search for the second item only reveals the following page form Apple, which means absolutely nothing to me.
http://developer.apple.com/documentation/Networking/Reference/OpenDirectoryRef/Reference/reference.html
The killer is that this all worked at one point. I had an Apple Tech out here and he helped me set up this 'Golden Triangle" method of authenticating against both directories. And it works... sort of... I can create groups in OD and add OD machine accounts to the group to enforce some settings. But I can't bring in AD users, cause I can't see the AD user list.
I hear that this is supposed to work... I can't figure it out.
Any help would be appreciated.
Thanks for your time.
Bill

Hi
Can you access Active Directory from the command line using dscl?
In what order are the LDAP directories listed in Directory Utility on the Server?
Is Kerberos running on the OD Master?
If you issue klist from the command line on the server itself - what is the result?
Or don't bother with any of the above and start again. You've nothing to lose anyway apart from some managed preferences which you can redo in little time. Scrub the configuration in the AD plug-in and demote to Standalone. Restart and go for an AD rebind. Make sure the edu.mit.Kerberos file is created in /Library/Preferences. Launch WGM and you should see AD Users and Groups this time, If you do go for promotion again. What you want to see in the OD Overview pane is everything running apart from Kerberos and the search base reflecting the FQDN of the OD Master. Make sure there is the loopback entry (127.0.0.1) in the LDAPv3 plug in. Finally make sure the OD Master lists itself first in the Directory Search Order.
I'm assuming the Server is configured as Advanced and is updated to 10.5.4.
Tony

Moving itunes directory not working

HI, I have tried moving my music to new directory hasn't worked. I went to preferences - Advanced- changed the location of my Itunes media folder to the new drive and yet every time I play a song I have to locate it, it doesn't play automatically. Can you help?

When I want to move an e-mail from Trash to any other folder, it won't work. When I select the 'To' folder in the drop-down list, the blue check mark moves briefly from the current folder to the target oen, but then it goes back to the current folder. The e-mail will not move to the new folder. I am using the built-in e-mail software on OS version 1.3.5.1. Does anyone have the same problem or know how to fix it?
Post relates to: Pre p100eww (Bell)

Virtual-directory, not working

Similar Messages

Maybe you are looking for