Virtual disk consistency error due to the Linux virtual machine virtualization host location ?

Environment
- windows server 2012 r2 Hyper-v failover clustering configuration
Installing CentOS 6.5 as a guest OS
Virtual machine is up on clustering , that information and virtual disk in the CSV .for the virtual machine .
1 of 1 showed the data virtualization in a virtual machine when there is a CentOS virtual machine on a host , the data of one of the virtual machine does not look after migrating to twice the virtualization host .
Do you have any experiences you had one of the above ? The workaround ?

Hi Leon,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Jeremy Wu

Similar Messages

Error: Thrown when the IP address of a host cannot be determined

hi,
While i install oracle 10g on Windows XP SP2, i got the error "Thrown when the IP address of a host cannot be determined". I am not connected to any network and my host file contains the loopback IP address (127.0.0.1). I don't know why did i get this error. If somebody knows then, please help me as quickly as possible.

Hi.
I can't say I've ever tried to install Oracle on an non-networked PC :(
My first guess would be to add an entry on the hosts file (C:\WINDOWS\system32\drivers\etc\hosts) for the local PC so you have something like:
127.0.0.1 localhost
127.0.0.1 machinenameWhere "machinename" is your machine name :)
This might resolve the issue.
Cheers
Tim...

How to transfer files from virtual machine to host machine

Hello,
I want to know how to copy files from virtual machine o host machine while the virtual machine running. I can't share files from virtual machine because i am just studying for mcsa in company computer. I can't connect my virtual machine to same network so
i'm using a different ip range and i created a internal network switch for my virtual machines in hyper-v. Please give me a best solution for my studies.
Regards,
Ashane Deshapriya.
Ashane Deshapriya ( MCP )

Finally I got the solution...
Here is how you can share files between a Hyper-V host and any virtual machines running on that host.
If you've used Microsoft Virtual PC or Microsoft Virtual Server, you'll have enjoyed the fact that you can copy and paste between a virtual machine and those platforms. This doesn’t work with Hyper-V however—you can't copy/paste between a VM and the Hyper-V
host.
The workaround is to do the following:
1. On your Hyper-V host, create a shared folder and assign Change permission to Everyone.
2. On the virtual machine running on the host, open the Network and Sharing Center and enable File and Printer Sharing.
3. On the virtual machine, click Start and type \\host_name\share_name where host_name is the name of your Hyper-V host and share_name is the name of the share you created.
4. Press ENTER and an Explorer window will open in the VM showing the contents of the shared folder on the host.
5. You can now copy files from the VM to the host and vice versa as needed.
Regards.
Ashane Deshapriya ( MCP )

How do I find out what Virtual Machines are hosted on a server?

How do I find out what Virtual Machines are hosted on a server?
I am working in a on a Windows 2008 box?
Thanks,
Ben
Mr Shaw

Hi Ben ,
I agree with Tim .
In addition , Get-vm came with windows 8 .
As a workaround to use powershell to manage hyper-v please use "PowerShell management Library for Hyper-V" within following link:
http://pshyperv.codeplex.com/
Also :
http://www.altaro.com/hyper-v/powershell-in-hyper-v-2008-r2/
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Premiere Elements reports low disk space error right at the end

Ok, so I wait for 5 hours for a 3 hour long video to get saved to my computer. It goes to 99% and then I get a low disk space error. After I clear up space, and click Ok, it starts all over again. Firstly, why doesn't PrE calculate/predict how much disk space I would need BEFORE starting to save, and secondly why does it at least not resume the saving process after I clear up disk space, instead it starts all over, with my 5 hours wasted?
Some serisous usability issues. Is it just me or do these things drive others crazy too?
Expected more from Adobe...

Unfortunately, as PrE uses a 2-Pass Encoding scheme (helpful to get the best quality within the same file size), it does not know exactly how much space will be used, until well into the second pass - the first is a survey of any motion in the Clips on the Timeline, and the second is the actual Encoding, and writing of a file.
Another consideration, regarding disk usage is whether one is Exporting/Sharing both Audio & Video. If one IS doing a Multiplexed file (with both an Audio and a Video Stream in one file), a Video-only file is written first, and then an Audio-only file, with a few "helper files" to be used in just a moment. Then, when that has completed, PrE reads those helper files, and creates the final, Multiplexed file. Last, the two separate Audio-only and Video-only files are Deleted. That takes some space, as at some point, one will have three large files, though two will be Deleted, along with the little helper files.
How much defragmented, free-space do you have?
What is your I/O setup, i.e. the number of physical HDD's, and how they are allocated?
Good luck,
Hunt

Runtime mapping error due to the special characters in source XML

Hi All,
I am facing problem with the special characters coming in the source XML message. it is failing at runtime in the mapping level. when i test with the same XML message manually in graphical message mapping it works.
it looks like a UNICODE problem which we face noramlly in ABAP as well. but looking for a solution.
For your reference i am giving the data which i am recivieing and the error message below.
the problem is with the character .
Source payload error:-
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'file:///C:/WINNT/profiles/CG1009/Local Settings/Temp/a173eb8_2721HTML000003'. Line 26, Position 22
Early response is appreciated.
Thank you

If your message contains special chars and the encoding is not being set, then the error is of the system which is sending the message, not XI's. The webserver should return the correct encoding.
At adapter engine, You can set the enconding for the messages you send (for example, in Soap adapter module, set XMBWS.XMLEncoding parameter with value iso-8859-1), but not for the messages you receive.
As a workaround, you could try using a Java Mapping to change the encoding manually. For that, set the encoding of the OutputFormat of the XML you'll serialize. Try the following code piece for the mapping (inside a try/catch declaration):
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = factory.newDocumentBuilder();
Document input = documentBuilder.parse(in);
OutputFormat format = new OutputFormat(XML, "ISO-8859-1", false);
XMLSerializer serializer = new XMLSerializer(out, format);
serializer.serialize(input);
For that code to work, you'll need to import xercesImpl.jar and xml-apis.jar in Imported Archives of mapping objects, in Integration Repository. Both are available at http://xerces.apache.org/xerces2-j/ .
Regards,
Henrique.

No Longer Able to Successfully Backup Hyper-V Virtual Machines from Host Without Shutting Them Down First

Hi all,
Prior to the new year, I was able to backup my VMs (two of them) using Windows Server Backup on their host server (running Server 2012) without shutting them down, no problem. Something has obviously changed, and this no longer works.
When I try to back up my VMs now, the process basically seems to timeout during the 'Creating Shadow Copy of Volumes' phase. The error log file points to the 'Microsoft Hyper-V VSS Writer' as the culprit (Status [5]; Unexpected Error), and the specific
message I receive from WSB is: Component was skipped from volume shadow copy. The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
I've seen only a handful of useful articles online about this particular error, but nothing I've tried has worked for me yet, like:
- Making sure the integration services are installed and enabled
- Making sure Windows Server Backup is installed on both VMs
- Making sure there is enough disk space in the VM for the backup to complete
The most compelling piece of information is that this process worked just fine before the new year started and now I can't make it work at all unless I turn off my VMs and then run the backup. It just seems like there's some small thing I'm missing
(a service needs to be updated or turned off or on, etc), but I can't seem to find that information anywhere...
Any help is appreciated. Thanks...
-T

Hi aalbert140110
you may want to try using our VssDiag freeware to inspect your Windows and Hyper-V logs:
http://backupchain.com/VssDiag.html
All you need to do is enter the date/time when the backup failed and it will collect whatever it finds
Hope this helps!
Octavio Tech Support @ BackupChain

Slow down speed for testing purpose between virtual machine in hosted in Hyper-v

Hello All,
I have searched and could not find thread related to this .
There is a scenario to test: the network speed between virtual machine [client and server ] must be really slow to check the application behavior on connecting to server.
Please advise . thanks in advance

Hi
Thanks for the reply . I am using
Virtual machine manager console .
right click on the virtual machine, i see network adaptar in Hardware Configuration and there no option to choose speed in any of the option.
Please guide me if i am wrong

LiveCycle virtual machine, Virtualization and support

Depending who you speak to, it is not clear whether or not the virtualization of Adobe LiveCycle in a Production environment is supported?
With the horse power required and cost of the underlying hardware to run LiveCycle, it would seem appropriate that Virtualization would be supported.
Can someone confirm that virtualization of livecycle is supported by Adobe in a production environment.?
If so, is proprietary hardware required? Or can any server hardware (respecting the minimum requirements) be used?
Is a specific VM software required or will any commercially available VM suffice?
Does any documentation exist? If so, where?
Thanks,

st_bush wrote:
Yes my parallels 9 is now working on Mavericks. However in order to install Parallels 9 I had to delete my Parallels 7. And you are right it was an excel file and it is not on the new Parallels 9 desktop, but that is what it was saved to on Parallels 7. I realized now that I should have backed up my computer before updating it. But I just still had a little hope that I could maybe find that excel file.
Parallels is a program which creates an environment in which an operating system (usually Windows) can run on a Mac. The Windows virtual machine which the Parallels program creates is stored in your Documents folder (Documents/Parallels). When you run the Parallels 9 installer, it asks if you want to remove a previous version of Parallels (that appears to be optional), but if you do, the installer does that automatically; there's nothing that you have to delete by hand yourself. All that gets deleted is the old program (i.e., Parallels 7). Your virtual machine files aren't touched and should still be present in the Parallels folder inside your Documents folder.
What you're calling the "Parallels desktop" is actually the Windows desktop which appears when Parallels starts up Windows; you probably have Microsoft Office installed in Windows, which is what you used to create the Excel file. Assuming you didn't delete that Parallels folder inside your Documents folder, the Windows virtual machine should still be there, with the Excel file still on its virtual desktop. With Parallels 9 running, you should be able to open the Windows virtual machine that's in that folder and run Windows, and the Excel file should reappear.

CS6 Bridge Insufficient disk space error when on the domain

We have a windows domain enviroment, and we run iMacs for the design team. Using the newest Mac OS X we get the "Insufficient disk space to complete this opperation " error after loading images in Bridge and then try to change or saved them. When we are not connected to the domain, we can modify and save them locally fine. But once we log onto the Windows Domain (we have mapped drives using SMB links for storage) you can not use Bridge. Is this a cashing issue with the mapped drives or is this something else. I've only seen one other post on this and there was never a real fix.
They could use Brige fne on CS5 using the previous version of MacOS(in facct they still have to right now). So i'm not sure if it is a Mac os issue or a windows/mac issue. From what I understand the two macs (older laptop and newer laptop) are set up the same way with the mapped drives using the same Domain log in so the preferences are the same.
The new mac is loaded with an i7, and 16gb ram, and plenty of drive space so I know its not that.
Thanks for any help
Tumi-ITGuy

Anybody have any ideas?
Not many here now about network set ups. Bridge is not designed for use over a network and also officially not supported by Adobe.
Bridge also uses a user specific library for its cache data.
This guy used to hang around here and has a successful set up for a network, try his blog:
http://imagearchivist.blogspot.nl

Activation error due to the missing objects in shadow instance.

Hello All,
We have problem with our NW701 -> NW730 upgrade. In phase ACT_UPG there is problem with activation of two tables ->
1EEDO519 "Table" "/BI0/PRSTT_EID" could not be activated
1EEDO519 "Table" "/BI0/PRSTT_OBJNM" could not be activated
The problem is that the data elements which are used in this tables were not mirrored into shadow instance. These 3 data elements are missing ->
/BI0/OIRSTT_FDATE
/BI0/OIRSTT_FTIME
/BI0/OIRSTT_SSYS
In the logfile CUSTEXP.IWY there is following error message ->
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_FDATE" "0RSTT_FDATE"
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_FTIME" "0RSTT_FTIME"
3 EUG166 Unknown message with "R3TR" "DTEL" "/BI0/OIRSTT_SSYS" "0RSTT_SSYS"
Worse is that in the log CUSTEXP.IWY we can see that 179 objects has the same error message and these objects do not exist in shadow instance.
When I try "where used" button on data element /BI0/OIRSTT_FTIME in SE11 I get the list of structures where it is used, for example structure /BIC/CE8OMIS_VS. This structure /BIC/CE8OMIS_VS exists in shadow instance and is active but the data element /BI0/OIRSTT_FTIME is missing! And if I check the consistency of the structure in SE11 I receive an error about missing data element.
I dont think this is ok, and there could be more objects which seems to be activated but if some of the data elements or domains etc... is missing there is a problem. I have opened OSS message for this but maybe someone from you have experience with such behavior and can help.
Thank you.
Regards,
JM

Hi Manish Patel,
I have received an answer from SAP :
I have confirmed with our BW-SYS-DB expert, actually the affected
objects ("*RSTT*") are part of the technical content. We deliver with
the technical content our interbal trace tool. Obviously part of the
trace tool is inconsistent in your system and as it was never used the
problem was not visible before the upgrade.
To proceed, please skip the errors ( the objects are absolute not
necessary for running BW ) and after the upgrade is finished please
activate the technical content. The missing objects must be created
by the activation.
So I have skipped the activation of these objects and I am continuing ...

IDVD reports strange insufficent disk space error message

I want to create a slide show DVD. When I open the project "Project Information" shows DVD capacitiy 0.6GB of 4.2 GB used. That seems ok, but when I try to save as Image I get an "insufficent disk space" error message (On the disk there are 28 GB free). After trying to save the Image "Project Information" says
5084435456,8 GB used - what's going on?
MacBook Mac OS X (10.4.7)

Are you doing the Save as Disk Image... correctly? This seem really odd.
File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Disk Read Error Woes

Hello there! Ive been having some issues with my SSD boot drive as of lately :(
From time to time, I receive a Disk Read Error when trying to boot into my computer...sometimes it happens after the computer crashes after working and then will not boot due to the Disk Read Error! However, the only time the computer will boot and bypass
the error is when when I open my case and unplug and reseat my boot drive, only then is the problem resolved for a day or two (sometimes weeks!) before the computer runs into the error or crashes and then runs into the error, to which it is fixed by a reseat.
The sata connection on the SSD seems to be solid (no wobbling or loose parts) so would the issue be the cable itself?

Hello everyone! After looking at everyone's suggestions on how to deal with this issue, I have done the following....I have..
1. Replaced both the SATA Power Cable AND SATA Data Cable leading to the SSD, as well as connecting the SSD to another SATA port on the motherboard
2. Used Chkdsk (with the "/r" parameter, as well as doing a few read-only checks to find anything) and the tests come back negative for any issues
3. Used Memtest +86 to check for RAM issues, to make sure that is not the issue
4. Used a HDD diagnostic tool (HD Tune) to further check for more issues, and everything is clear...
After doing all of the above, the computer ran fine without any Disc Read Errors for about a week before coming back yesterday, and just like before, the issue would go away as soon as I unplugged and replugged both the SATA Power and Data Cables :(
After the latest Disc Read Error, I have
1. Updated my Motherboard's BIOS
2. Connected the SATA power cable to a different port on my Modular PSU
and unfortunately, there is no firmware update available on my SSD, which is a KINGSTON SNV425S264GB, which is part of the discontinued Kingston SSDNow series...
So, after doing the BIOS Update and modular PSU port switch, the SSD is running fine for about a few hours now....with all of this said, would the issue be solved with the BIOS Update, or would it be safe to say this SSD is on the way out? :(

Error while viewing the reports

Hi,
When I try to import the catalog from our development system to testing system, catalog gets imported successfully. But when I try to view the reports it throws the following error.
oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
     at oracle.dss.d4o.gui.workbook.PageFrame.stateChanged(Unknown Source)
     at javax.swing.JTabbedPane.fireStateChanged(Unknown Source)
     at javax.swing.JTabbedPane$ModelListener.stateChanged(Unknown Source)
     at javax.swing.DefaultSingleSelectionModel.fireStateChanged(Unknown Source)
     at javax.swing.DefaultSingleSelectionModel.setSelectedIndex(Unknown Source)
     at javax.swing.JTabbedPane.setSelectedIndexImpl(Unknown Source)
     at javax.swing.JTabbedPane.setSelectedIndex(Unknown Source)
     at javax.swing.JTabbedPane.insertTab(Unknown Source)
     at javax.swing.JTabbedPane.addTab(Unknown Source)
     at oracle.dss.d4o.gui.workbook.PageFrame.initialize(Unknown Source)
     at oracle.dss.d4o.gui.workbook.PageFrame.<init>(Unknown Source)
     at oracle.dss.d4o.gui.MainPanel$OpenWorkbookTask.construct(Unknown Source)
     at oracle.dss.d4o.gui.common.SwingWorker$4.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Details of two systems are
Development Env
Database version : 10.2.0.1.0
OLAP API Server version : 10.2.0.1.0
OLAP AW Engine version : 10.2.0.1.0
OLAP Catalog version : 10.2.0.1.0
Testing Env
Database version : 10.2.0.2.0
OLAP API Server version : 10.2.0.2.0
OLAP AW Engine version : 10.2.0.2.0
OLAP Catalog version : 10.2.0.2.0
Is this error due to the difference between OLAP Catalog Version in two environments? Any ideas ?
Thanks in advance
Rana

Hi
Well I can't put my hand on my heart and say that the difference between the OLAP Catalog Version in two environments is your issue, but if I saw that on my system I would be having my suspicions. I would definitely try and overcome this first and see what happens. You've got to knock out one piece of the puzzle at a time.
Isn't it OCCAM's razor (http://en.wikipedia.org/wiki/Occam's_Razor) that says when everything has been considered the obvious answer is usually the correct one?
Best wishes
Michael

Import error due to character set difference?

hi,
hoping anyone to explain reason for the following import error.
here's the situation,
- export client used WE8MSWIN1252 charset (release v10.02.01)
- import server used WE8ISO8859P1 charset (release v10.1.0.4)
all tables appeared to be imported without error, except that import terminated unsuccesfully due to oracle error 2248
"ALTER SESSION SET PLSQL_OPTIMIZE_LEVEL =1 NLS-LENGTH_SEMANTICS = 'BYTE' PLSQL_CODE_TYPE = 'INTERPRETED' PLSQL_DEBUG = FALSE PLSQL_WARNING = 'DISABLE:ALL' PLSQL_CCFLAGS =''"
ORA-02248: invalid option for ALTER SESSION
was error due to the difference release version? char set conversion to non superset?
appreciate any help pls

It is difficult to say what is the current state of the database, so it is recommended to reexport and reimport the object definitions. You may miss some other stuff like object types, contraints, etc. Table data should be OK, so reexport should not include data.
As far as character sets are concerned, because of the difference between the export client character set and the import server character set, you may have lost some characters in the code range 0x80-0x9f. This includes Euro sign, TM, sign, "smart" quotes, en- and em-dash, etc. Use the Windows charmap.exe to see all the codes. If you have some of these codes in the source database, you have lost them on import (they got converted to the reverse quotation mark code 0xbf).
-- Sergiusz

Virtual disk consistency error due to the Linux virtual machine virtualization host location ?

Similar Messages

Maybe you are looking for