Virtual fw for Azure pack with fw rules.

Are there any Virtual fw for Azure pack, like VMware have Vshield edge?
I really miss the control of fw rules in azure pack. I want to be able to block or allow icmp, open up ports or block ports on networks. Is that possible somehow?

Take a look at:
http://www.5nine.com/lp/59CloudSecurityWAP-Preview.aspx
http://www.5nine.com/5nine-security-for-hyper-v-product.aspx
They'll do the job!

Similar Messages

Wordpress Gallery Item for Azure Pack

Hi,
I have a fully functioning azure pack web sites implementation, in the available gallery items I have lots of web apps available including Better CMS, BlogEngine.net, DasBlog, Ghost, Orchard CMS etc. However I don't see Wordpress, Joomla and Drupal... I
was under the impression that these were available? Am I missing something or is there further installation required?
Thanks in advance.
Microsoft Partner

Hi,
You need MySQL servers implemented and added to your subscription in order to choose sites that have a dependency on MySQL
Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

BI: Virtual Provider for ECC Report with same selection parameters

Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.

please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand

Does windows azure service management APIs work for windows azure pack setup as well ?

Does Service Management REST APIs(http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx) for Azure work with
Windows Azure Pack as well ?

Hi,
Windows Azure Pack is basically a proof of concept.
So, it will not have all the features that Windows Azure has in the cloud.
Some services such as Cloud services & storage services are not available.
for some available API support:
If you found this post useful, Please "Mark as Answer" and "Vote
as Helpful".
Best Regards, Tuan Khalib

Something interesting with check rule for VAT registration no.

Hi Guys,
I found something weird in sap with check rule for VAT registration no.
If I set any of check rules for US and save(tcode oy17), then change the country of a customer from DE to US and save(not change the VAT registration no), the system post error messages "ISO code DE is not correct in the VAT registration number". But if I set rule for AU(australia) with same rule as US, and change the customer's country from DE to AU(not change the VAT no), no error happens and customer can be saved successfully. So anybody can give any explanation on this problem?
Thanks in advance, point will be rewared. Waiting for the comments.
Regards,
Alex

<TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%"><tr><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=add2d1.jpg" name="add_QTB_5174" id="add_QTB_5174" onclick="javascript:addRowToTable('QTB_5174',4,22.5);return false;"/></td><td width="15px"><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=delete2d.gif" alt="delete" name="delete_QTB_5174" id="delete_QTB_5174" onclick="javascript:removeRowFromTable('QTB_5174');return false;"/></td><td><input type="image" src="wwv_flow_file_mgr.get_file?p_security_group_id=1046425373323359&p_fname=edit2d.jpg" alt="edit" name="edit_QTB_5174" id="edit_QTB_5174" onclick="javascript:updateTableRow('QTB_5174',22.5);return false;"/></td></tr></table>
<input type="hidden" value="QTB_5174" id="5174"><TABLE align=center border=0 cellPadding=1 cellSpacing=1 width="95%" id="QTB_5174" name="QTB_5174">
this a sample code. I have marked the name attrib in bold.

Connect Azure Pack to Service Bus for Windows Server with Custom DNS

Hello! I'm trying to configure Azure Pack to use Service Bus for Windows Server 1.1 with Custom DNS.
All runs on one virtual machine (Windows Server 2012 R2) in Windows Azure.
I following this post:
roysvork.wordpress.com/2014/06/14/developing-against-service-bus-for-windows-1-1
Replace FramDNS "servicebus" to "mymachine.cloudapp.net", and create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
On Windows Azure Virtual Machine:
1.I'll set publuc DNS: mymachine.cloudapp.net
2.Open ports: 10354,10355,10356,10359,10000-10004
3.In hosts file: 127.0.0.1 mymachine.cloudapp.net
4.Create certificate:
SelfSSL /N:CN=mymachine.cloudapp.net /V:1000 /T
PowerShell:
Stop-SBFarm –Verbose
Set-SBFarm -FarmDns 'mymachine.cloudapp.net'
Update-SBHost –Verbose
Start-SBFarm –Verbose
New-SBAuthorizationRule -NamespaceName ServiceBusDefaultNamespace -Name MainRule -Rights Manage, Send, Listen
Afther that i can connect to my ServiceBusDefaultNamespace with SAS.
It's work perfect. But, When I try to create Service Bus Namespace from Azure Pack Tenant portal - in Log an Exception:
Namespace Provisioning Exception. TrackingId: . SystemId: . Namespace: SomeNamespace.
Method: Activating. Exception: System.Net.Http.HttpRequestException: An error occurred while
sending the request. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. --->
System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure.
And status of namespace - Activating.
Please help!

Hi Alexander,
According to the log, it seems that the validation process of the certificate failed.
Please make sure that the certificate is installed in the client properly.
Usually, self-signed certificate should be installed in the Computer Account-->Trusted Root Certificate Authorities.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it possible to use SCOM 2012 R2 with the new Azure Managment Pack to monitor Aure Wadlog Events for azure sdk 2.5

My operations team has been using MOM 2007 and has recently migrated to SCOM 2012 R2.
Till now we are using Monitoring Pack management packs which were released way earlier (https://www.microsoft.com/en-us/download/details.aspx?id=11324),
and had a dependency on diagonstics connection string being present in the cscfg of Azure package.
This pack was allowing us to monitor the wad logs and events generated by applications.
However we plan to move to newer Azure managemen pack (http://www.microsoft.com/en-us/download/details.aspx?id=38414), which allows for discoverability.
I have 2 questions -
Is it possible to monitor Diagonstics Event Log with the new Monitoring Pack released on 10/2014 ? Or will the users still require the earlier pack for monitoring diagnostics installed in parallel ?
Azure SDK 2.5 got rid of diagonstics connection string. Is there any possible way to Monitor of Azure Diagonstics wadlogs using SCOM 2012 R2
Thanks,
Pratush

Hi Pratush,
I would like to suggest you go through the management pack guide to get details. And you should be able to create custom monitor to monitor event logs for Azure.
Hope the below links be helpful for you regarding to monitoring Azure:
How to monitor your Windows Azure application with System Center 2012 (Part 2)
http://blogs.technet.com/b/dcaro/archive/2012/05/03/how-to-monitor-your-windows-azure-application-with-system-center-2012-part-2.aspx
Windows Azure and SCOM 2012
https://social.msdn.microsoft.com/Forums/azure/en-US/ecb409e2-8595-40e8-9a73-757b670b06db/windows-azure-and-scom-2012?forum=windowsazuremanagement
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

OS X Remote Desktop is not working with Azure Cloud Machines or Azure Pack Machines

Hi,
i can't connect to any Machine via Console. I'm Working with Machines in Azure Pack and in Cloud. The connection causes a Authentication Loop.
Best Regards

Hi,
In addition, here are some related Azure forums below for you:
Azure Virtual Machines Forum
https://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesforWindows&filter=alllanguages
Azure Management Portal Forum
https://social.technet.microsoft.com/forums/azure/en-US/home?forum=windowsazuremanagement&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to get a certificate for SQL server (Virtual machine) on Azura

Hi
I am lost and I don't know what to do have a certificate available for SQL2014 (Data warehousing virtual machine Size A7).
My purpose is to connect to SQL server via Power Query and Engagement Studio with Encryption connection option ticked.
I have looked at a lot of pages via Google and I wish there is a clear step-by-step guide for me to follow. This is a MS Cloud with a predefined virtual machine. There should be some guide. Can you point me to the right direction please?
I have a

Hi,
Here are some related links below for you:
a real certificate for a virtual machine
https://social.msdn.microsoft.com/Forums/azure/en-US/7c48763f-fb04-46c6-a6e6-c21740d007cf/a-real-certificate-for-a-virtual-machine?forum=WAVirtualMachinesforWindows
Configuring a custom domain name for an Azure cloud service
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-custom-domain-name/
Create a Service Certificate for Azure
https://msdn.microsoft.com/library/azure/gg432987.aspx?f=255&MSPPError=-2147217396
Since we are not familiar with Azure, if the information above is not helpful, please post another thread in Azure forums and post a feedback regarding your requirement:
http://feedback.azure.com/forums/34192--general-feedback
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Autoscaling Application block for Azure worker role console app not working. Get error as The HTTP request was forbidden with client authentication

I have written a console application to test the WASABi(AutoScaling Application Block) for my worker role running in azure. The worker role processes the messages in the queue and I want to scale-up based on the queue length. I have configured and set the
constraints and reactive rules properly. I get the following error when I run this application.
[BEGIN DATA]{}
DateTime=2013-12-11T21:30:02.5731267Z
Autoscaling General Verbose: 1002 : Rule match.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","MatchingRules":[{"RuleName":"default","RuleDescription":"The default constraint rule","Targets":["AutoscalingWebRole","AutoscalingWorkerRole"]},{"RuleName":"ScaleUpOnHighWebRole","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnLowWebRole","RuleDescription":"Scale down the web role","Targets":[]},{"RuleName":"ScaleUpOnHighWorkerRole","RuleDescription":"Scale
up the worker role","Targets":[]},{"RuleName":"ScaleDownOnLowWorkerRole","RuleDescription":"Scale down the worker role","Targets":[]},{"RuleName":"ScaleUpOnQueueMessages","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnQueueMessages","RuleDescription":"Scale down the web role","Targets":[]}]}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling General Warning: 1004 : Undefined target.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","TargetName":"AutoscalingWebRole"}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Verbose: 3001 : The current deployment configuration for a hosted service is about to be checked to determine if a change is required (for role scaling or changes to settings).
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","HostedServiceDetails":{"Subscription":"psicloud","HostedService":"rmsazure","DeploymentSlot":"Staging"},"ScaleRequests":{"AutoscalingWorkerRole":{"Min":1,"Max":2,"AbsoluteDelta":0,"RelativeDelta":0,"MatchingRules":"default"}},"SettingChangeRequests":{}}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Error: 3010 : Microsoft.Practices.EnterpriseLibrary.WindowsAzure.Autoscaling.ServiceManagement.ServiceManagementClientException: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure'
in subscription id 'af1e96ad-43aa-4d05-b3f1-0c9d752e6cbb' and deployment slot 'Staging'. ---> System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException:
The remote server returned an error: (403) Forbidden.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
If anyone know why I am getting this anonymous access violation error. My webrole is secured site but worker role not.
I appreciate any help.
Thanks,
ravi

Hello,
>>: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure' in subscription id **************
Base on error message, I guess your azure service didn't get your certificate and other instances didn't have certificate to auto scale. Please check your upload the certificate on your portal management. Also, you could refer to same thread via link(
http://stackoverflow.com/questions/12843401/azure-autoscaling-block-cannot-find-certificate ).
Hope it helps.
Any question or result, please let me know.
Thanks
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0

Hello
I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
The process stops when the disk conversion start. Error log below.
Thanks for any advice.
Regards
Toon
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
This conversion will proceed off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
The uninstallation of tools is not supported in off-line machine conversion scenarios.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
NOT preparing source virtual machine, this conversion is being treated as off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
Downloading VMware virtual disks from source virtual machine
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
04/18/2014 14:53:04 +02:00 [9] EXCEPTION:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
04/18/2014 14:53:04 +02:00 [9] Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
04/18/2014 14:53:04 +02:00 [1] Background task is complete.
04/18/2014 14:53:04 +02:00 [1] Conversion error message is displayed.
04/18/2014 14:53:04 +02:00 [1] Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
04/18/2014 14:53:06 +02:00 [1] Pressing Finish on the 'Completion' page.
04/18/2014 14:53:06 +02:00 [1] UI wizard is closing.
04/18/2014 14:53:06 +02:00 [1] Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
04/18/2014 14:53:09 +02:00 [1] Cancel confirmation prompt was canceled by user.

Hi,
Have you found any solution?
Thanks
Alessandro

Source control issues with Azure Pack Web Sites

Struggling to get my Azure Pack Web Sites POC off the ground. Infrastructure is built and I'm ready to deploy a .NET app. I can successfully deploy an app from the gallery and tested and it works so we're good there.
However I'm having an issue with source control and getting an app deployed. We have a local instance of Github enterprise here we use for all code repositories. Can I use this? In my tenant site I have created a new web site and added
an external repository for source control. I put in the HTTP link to my local github enterprise repo and it tries for a minute and returns the following error:
Command 'git.exe fetch external ...' aborted due to no output and CPU activity for 60 seconds. You may increase SCM_COMMAND_IDLE_TIMEOUT setting to solve the issue.
git.exe fetch external --progress
There's nowhere I can specify credentials or SSH keys so azure pack can communicate with my repo (i'm assume this is the issue). I can't put company custom code out on codeplex or public github so that's out. Am I trying to do something that
isn't possible in Azure Pack?

I guess I'm confused. When I go into my web site and click the Setup deployment from source control, under the External repository option it says both Git and Mercurial repositories are supported. This is a different button than the GitHub option
for source code. So what's the point of that option is you can't actually use a git repo?

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to run .exe files with Virtual PC for Mac

Hey Guys, I'm new around here and with mac technology as well. Anyway, I have an iMac OS X 10.5.1 Leopard and I've recently purchased the Virtual PC for Mac 7.0.2 software. So I'd like to know how to use this program properly, because I need to run some executable files in my computer. It is confusing for me because I don't know how to get started, and I only get to the part when it says "OS not found, Install an OS on this hard drive".
Honestly I've no idea of what an OS is or where do I get that. So I'd really appreciate if one of you guys could tell me, step by step, what to do to use Virtual PC properly, and finally learn how to run .exe files on mac.
Thanks in advance!
Have a nice day!

Always nice to see new faces
Honestly I've no idea of what an OS is or where do I get that.
This brings up the second part of your problem. The first part is setting up either a proper Virtual Machine program like Parallels or VMfusion, or setting up a Boot Camp partition on your drive.
http://www.parallels.com/
http://www.vmware.com/products/fusion/
OS stands for Operating System. You are running Leopard 10.5.7 as an operating system on your Mac (MacOS X).
The second part of your problem - You will need a copy of Windows XP or Vista if you want to run Windows on your Mac.
There is at least one other solution for running Windows programs on a Mac. It's called "CrossOver" by a company named 'Codeweavers'. It's based on a project for "Wine" to be able to run PC programs on a Mac or Linux, without having to buy or install Windows. It works with a narrow subset of Windows programs so you would want to make sure the program you want to run is compatible with CrossOver before you buy it.
http://www.codeweavers.com/products/cxmac/
In addition to all the above information, you need to upgrade your Mac to the latest 10.5.7 from 10.5.1. "Software Update" is located under the black Apple icon in the Menu Bar at the top left corner of your monitor. After you are updated you will want to update your Profile here so that it shows the proper OS version.
With your level of experience with MacOS X and the Windows OS's you should probably get some help from a local Apple store. They have an appointment system and do offer many types of help and training, and they can offer assistance with choosing the proper programs for you to purchase for your machine.
You are also welcome to continue to ask questions here, of course. You will want to ask your questions with different issues that come up in different threads so that the answers stay focused on the title of the thread.
Message was edited by: dechamp to try to be more accurate with a fairly complicated issue...

Wrong GL Dates for Distributions for Credit Memo with Rules

Hi all
Using Autoinvoice, Ive created Invoice with Invoice date 17-APR-08 and 12 month payment term. Invoice line has amount of $460 and deferred accounting rule of type "Accounting, Fixed Duration". Rule start date is 17-APR-08 and duration is 1.
I run the Revenue Recognition and then Revenue Adjustment API "ar_revenueadjust_pub.earn_revenue" to create revenue account schedule for 12 month period based on business rules. Now I issue credit memo of $60 on 18-JUN-08 with LIFO rule method and LIFO split term method, against the above invoice line.
I run revenue recognition, go to the credit memo distributions. All the distributions show GL Date as 17-APR-08 with correct percentages and amount as in the original invoice line.
Can anyone help me understand why all distributions of credit memo have same gl date?

Hi Nagamohan,
Credit Memo is applied to invoice line with deferred rule.
If I issue credit memo on 18-JUN-08 with LIFO against a Invoice line which uses "Daily Revenue - All Periods" rule, the distributions show
GL Date - Dr - Cr - Amount
17-FEB-09 REV UNEARN 0.77
17-MAR-09 REV UNEARN 39.07
16-MAR-09 REV UNEARN 20.16
The above amounts are exactly the reverse distributions as in Original Invoice line.
I was expecting the same thing to happen in Deferred Fixed rule, but the only difference is for Fixed rule I cannot populate Rule_End_Date through Autoinvoice or manually.
Kishore.
Message was edited by:
chakoo

Virtual fw for Azure pack with fw rules.

Similar Messages

Maybe you are looking for