Virtual guitarist 2 not working as plug-in

Hey guys I just purchase virtual guitarist 2 upgrade from 1 to 2. It working fine but I can open as plugin in logic pro 7.2.3. I just install the Virtual Guitarist 2 Universal Binary for Mac OS X the steinberg to is going to work but is still not.
so help guy what need to do?

VG has two different plugins. The fx plugin is available in the plugin slots where you'd call up eq or compression.
The instrument version is called up on an instrument track under where it says I/O and above the output assignment. It's the slot where you'd call up exs or other logic instruments.
Message was edited by: Mike Connelly

Similar Messages

My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

HEADPHONES do not work when plugged in - iMac Intel

So I reinstalled the operating system a few months back. After completing this my headphones do not work when plugged in. I do have them plugged into the correct jack. When i plug them in the built-in speakers go silent for a second or two as if the headphones are working but then the speakers kick back in with no sound in the headphones.
The headphones worked just prior to reinstall so I'm not sure its the jack itself but something in the operating system.
I have also checked in System Preferences 'Sound' and when they are plugged in, they do not show in the devices window.
What the heck is going on? I've read in other forums that this seems to be something of a typical problem but have not found a solution to the problem.
thanks in advance for your help.
Message was edited by: ikuchyacokov

Welcome to the discussions.
Mate, it sounds more like a system glitch than a hardware issue. I too have been experiences some 'funky' issues. However, they have all been fixed by running Onyx disc maintenance software. Install Onyx and run 'automation'. You can cancel the disc checking operations on start up and ignore the back up disclaimer. Give it a go and post back with the results.
Onyx - http://www.titanium.free.fr/download.php?sid=6d79ad9269e8f01484b51a1056277186
Make sure you get the right version for your OS.

Report on Virtual cube is not working.

Hi,
I created a report on virtual cube, Virtual cube is based on Function module which will pick data from Multiprovider, In the FM mention the import parameter name as " Muli Provider" Name.
Multiprovider built on SPO object , On SPO object BIA is created, If can de activate the BIA on SPO then the report built on virtual cube is working in the portal. If I can activate the BIA the report is not working in the portal.
The report is working fine in RSRT and Analyzer either BIA is active and deactive.
Regards
GK

Hi
The multi cube you created must be comprising of Info cubes, DSO and Info objects. Now this error which you are getting is it for
- a specific characteristics or
- any characterisitcs that is entered fourth in the series of filter selections or
- the fourth value in a specific characteristics
Is the characteristics and the value which you use in filter present in all the underlying objects included in the multi cube ? You can check it in each of the objects associated in the multi cube, independently. This will give you an idea as to whether the error reported by the system is genuine or not.
Cheers
Umesh

I have updated my iTunes to the newest version, 10-25 on a windows XP system. Now my java virtual machine is not working and I need it to run applet window. My Java is also newest version. What can I do to fix/repair my issue?

I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, Thanks

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

External headphones not working (unless plugged in at boot up)

Hello,
I have a MBP 1st gen unibody running 10.5.7. However in last few days my headphones are not working when i plug them in. When i got into system pref-sound it still shows as internal speakers... this is where it goes weird tho: If i boot the machine up with the headphones in, they work fine and system prefs show them as headphones. But as soon as i unplug them and plug them back in, the machine doesn't recognize them anymore.
I have done the following with no luck:
Repaired permissions
Reset PRAM
Created new user account
Tried another set of headphones
Reinstalled quicktime
Restored system from time machine backup
Did a full archive and install and tried it under 10.5.5 and was same then later did all the updates, still same.
I think i covered the basics.. its just weird it works when leaving headphones in on bootup then afterwards stops if i take them out and back in. I have booked an appointment at a genius bar but wonder is there anything ive missed before i go....
Any help, tips or tricks will be appreciated.

Hey!
I'm having the exact same problem. Just bought a new MBP 13 inch with Snow Leopard already installed. I toggle a lot between having external speakers or headphones plugged into audio output. It was working fine for about the first week with the computer, but just started having the problem you describe-- not recognizing an external audio device plugged in unless I restart/put computer to sleep. Any solutions yet?
Thanks!
Kyle

Nano will not work unless plugged in

Hello.
I have searched through the help section and through the forums, but I can not seem to crack this problem.
My inlaws told me there iPod nano would not work anymore. They simply told me that they could not get it to come on. I thought I could fix it rather easy. Turns out that it isn't that easy.
The nano will only work when I have it plugged up. It says it is fully charged. When I unplug the nano, the screen dims out for a second and then goes to gray as if it were off. I can not get it to come back on however. When it is plugged in, I can navigate through the nano as if there are no problems. As soon as it is unplugged however it acts dead.
Any suggestions? I've tried resetting. Doesn't work unless plugged in...and didn't solve the problem. I've done the five r's. No problems with the hold button...
I am lost on this one guys.

I would say that it's a dud battery.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

Ipad air 2 touch id not working when plugged in

A very strange problem tonight.
After work, I grabbed my iPad Air 2 which was plugged in to the Apple Charger next to my chair. Touched the home button to open it - nothing happened. Tried again. Nothing happened. Entered the code and the IPad Air opened.
After dinner, same thing. Touch ID did not work with any of 3 fingers. With the code - it opened. So, I decided to delete and redo the finger scans. Turned off - no change - Touch ID not working.
To get a better grip, I unplugged the Apple charger. Viola! Touch ID worked. Plugged it back in. Touch ID stops working.
Powder off, power on. Touch ID works unplugged but not plugged in. I have done the Reset All Settings. No change.
At a loss. This is not a 3rd party charger - it is the Apple one that came with the iPad Air. Anyone got any ideas?
Tim

Make sure the usb wall adapter is from Apple too.
if your using a generic wall adapter and original Apple lightning cable,
the touch ID won't work.
IF you use both apple wall adapter and lightning cable
the touch id should work.
hopes this helps

Macbook air not working unless plugged in?

I have a mid 2011 macbook air and it has had an issue of not working unless it was plugged in but mainly only working for a short about of time and then turning off suddenly and not turning back on unless pluged in or decreasing in power extremely and abnormally quickly. It happend a few times last year and twice i took it to a specialist specified by apple and twice i took it home with them having done nothing to it. They stated that there was nothing that the diognostics could see that was wrong with it. Eventually it fixed the problem itself and worked fine. just as long as i never ran it flat it worked fine. untill the other month i did that and now it will not work at all without being pluged into a power source. it has been plugged in all day whilst i have been using it and has not reach 100 per cent of power, it will not pass 98%. If the power cord accidentally falls out it turns of straight away, doesnt shut down just abruptly powers off. Never before has it been this bad. I have noticed it has also in this time it hasnt been working again its also been running noticably slower than usual. But that may just be me being parnoid. Im sick of taking it to get fixed only for them to tell me there is nothing wrong, because evidently there is. What options do i have? i just seriously need it fixed.

Your charger might be bad. If you have access to another charger, then try that one. If you dont have access, either find someone who does, or go to the Apple Store and purchase a new one. If the computer is still under warranty, take the computer AND the adapter and have them looked at.

Twist s230u Volume control sticks down and virtual keyborad does not work

My Apologies if i have missed a fix for this somewhere.
I have a problem with the volume control sticking as if i was pressing it down. This happens as soon as I press a key on the actual keyboard.
The virtual keyboard will also not come up after an actual key is pressed and the windows button in the middle of the screen will not work either, only dims screen quickly and does nothing unless pressed a bunch of times really fast.
I also had to roll back to an earlier driver version for the mouse pad to halfway work, this also was not working after an actual key on the keyboard was pressed.
I Have done all driver updates with no luck.

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Touch Screen not working when plugged in via usb to laptop

I am hoping someone can help me figure out what to do because I have run out of ideas... When I plug the phone into my laptop via the USB cable provided with the phone (2006 Dell 1710 Inspiron, Windows Vista) the touch screen does not work. The phone is functioning but I just can't use the touch screen to do anything, more specifically, I want to connect as a mass storage device so I can transfer files, music, pictures, etc.
I have downloaded the drives, installed and reinstalled the drivers, soft rest, used all 5 USB ports on the laptop and made sure the ports were up to date for drivers and software on the laptop. Still the screen won't work when plugged in.
My next step was to try it on a different computer so I used an HP desktop running Windows 7. Downloaded the drivers when prompted and low and behold the screen worked just fine when plugged in. It also works when plugged into my computer at work.
Considering the phone works fine on another computer I am guessing it might be the USB ports on my laptop or the software associated with it.
If anyone can help I would greatly appreciate it. Thank you!

I would definitely agree with you, Funkytown. If we know the phone works properly with two other computers and you've run through all the troubleshooting (awesome job!), then we can determine there is something with the computer that is causing the issue.
Thank you!

Macbook pro ipod nano does not work after plugging in

I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
Does anyone have any suggestions? Please help. Thanks!

I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

Virtual Wifi miniport not working Pavillion dv8

Hi! I own a pavillion dv8 1080ea with windows 7-64bit. My wireless network adapter is not working and I tried to update or delete and reinstal the drivers but they didn't work.
Where can I find the proper drivers?

Hi GrigorisK,
I see that you are looking for your wireless drivers. I have found the drivers and are included in the link below.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-80835-1&cc=us&dlc=en&lc=en&...=
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Camera not working when plugged into certain USB ports

I just purchased a Creative Live! Cam for use on my dual G5 running 10.5. When I plug the camera into the USB port on the front of the Mac, it works fine with iChat.
However, when I plug it into the back of the monitor (older style Cinema display), it says it is in use by another application.
Any idea how to resolve this? The cable isn't terribly long and the machine is several feet away from the monitor, so I'd like to use the ones on the monitor. (Obviously it gives a power-error message when plugged into the keyboard, which is normal).
Thanks

Seems like it is a USB 2.0 or not problem
10:38 PM Saturday; August 23, 2008

Iphone 5 not working when plugged into widows

i have an iphone 5 around 6 months now, it charges perfectly and when i plug it into my laptop it does not show up at all, at the start this was not an issie and i now can now sync music or even charge it on the laptop. i have tried a different laptop and i different lead with no luck. the apple mobile device is intallef and both iphone and itunes are up to date in terms of upates. Ive tried alot f things at this stage and i looked at the thing on the itunes support on this and tried the things it said, again the phone is not even charging on the laptop, i have a windows 7 laptop and iphone 5.. any halp is great thanks

With the device not connected to the computer, remove and reinstall iTunes, following the instructions in this support document http://support.apple.com/kb/HT1923. Make sure you follow them in order, or it could lead to problems. After reinstalling, connect the phone. It should reinstall the drivers at that time.

Virtual guitarist 2 not working as plug-in

Similar Messages

Maybe you are looking for