Virtual Host, new site not working.
OK I'm fairly techie (I write IOS/MacOS apps for a living), I just don't do web technologies. I have SL Server on my iMac running several sites prefectly on one IP.
example.com
webmail.example.com
somethingelse.com
I set up a new site thru Server Admin (clients.example.com). I keep getting "Safari can't find server."
The other sites work beautifully, my DNS settings are ok (checked via "changeip -checkhostname").
I even deleted the client site and copied webmail.example.com since that site works. I did everything I can think of (yes I checked the aliases, general system/site folder permissions, and rebooted several times). Can I only do three sites?
I really just need a list of things to try, most of the setups involve terminal and client Mac OS. It's the same, but since I created all the other sites with Server Admin, clients.example.com should be the same.
If the HTTP requests were getting to the server, the server would answer them (maybe with an inappropriate virtual site, but it'd respond). The "Safari can't find server" error indicates that the client isn't able to contact the server, i.e. a DNS, network connectivity, wrong port etc problem. In this case, since your other virtual sites are reachable, it's probably a DNS issue. "changeip -checkhostname" validates the reverse lookup of the server's primary IP address against its hostname, which isn't what you need to check here. You need to do a forward lookup of clients.example.com and make sure it resolves to the server's IP address. "host clients.example.com" is my favorite for this, although "dig clients.example.com" would give somewhat more detail.
Similar Messages
-
Virtual Host Mail Accounts Not Working
Hi. I have attempted to search the discussions for an answer to this, but haven't had much luck.
I have one server running 10.5.8. This server hosts 4 domains, 1 main and 3 virtual. Each domain needs an [email protected] email address. I have created a user in WGM named info and have created the short names for each domain: info (I assume the local domain short name doesn't need the domain.com added), [email protected], [email protected] and [email protected] I have entered the 3 virtual hosts in Server Admin-->Mail-->Settings-->Advanced-->Hosting-->Enable Virtual Hosting section.
The issue is that when I configure Mail for each of the accounts, they are being treated as though they are aliases and not virtual host accounts. In other words, each account sees the exact same mail. When I check Server Admin-->Mail-->Maintenance-->Accounts I do NOT see the three additional virtual host accounts, so clearly they are not being created.
This same server is also the mail server, so each domain's DNS MX record is pointing to this server. Like I said, I can send and receive mail, but it goes to all the accounts simultaneously (as aliases would) rather than individually.
I've scoured the documentation, but cannot seem to find what I have missed here to prevent this from working as it should.
Does anyone have experience with a successful deployment of a situation similar to this one?I do, indeed, have the addresses set up for one user, as you have ascertained. I suppose that I will alter the setup in the manner in which you describe. What is completely perplexing to me is that if you review Apple's documentation just after the section after describing Mail Forwarding (~pg. 37) you will see that Apple is saying I can set it up the way I have. Directly from the text as follows:
Virtual hosting is a method you can use to host more than one domain name on the
same computer and IP address, with overlapping mail user names.
For instance, a mail server can receive mail transfer requests for two domains,
mail.example1.com and mail.example.com, both of which resolve to the same IP
address. For mail.example1.com, the server would deliver mail to “[email protected]”
to a user mailbox for “bob,” while it would also deliver mail to “[email protected]” to
a different user mailbox. Virtual hosts are essentially the converse of local host aliases.
Again, I state that if this is to be true, then I should have the ability to assign one Open Directory account and give that account the four addresses as above with each having a separate user mailbox. The way it is behaving now is like aliases, not virtual hosts as Apple describes.
I'd love to understand why this is the case, perhaps I'm completely misunderstanding the text.
Thanks again for the help, I'll just create 4 accounts, easy enough. -
Host command is not working on linux
Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokaremHi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind -
Some web sites not working in FF but they are OK in Safari.
A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJTHello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you -
Download software site not working for Financial Data Quality
Hi
Financial data quality management site download site not working. it's showing error message below error message.
Error message: "We're sorry,the page you requested was not found.We have recorded this error (404) to help us fix the problem"
Site: http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
regards
AnilHi Ferro;
As far as I can see Apple doesn't have to fix anything with Software Update because it is working perfectly for myself and the users I help to support.
So maybe if you can give us more details; such as what error messages are you getting, what have you done so far to solve this problem.
Allan -
Hello
FDM download site not working for 11.1.1.3 version
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
From
SarillaI wonder what are we supposed to understand from this?
Is JSF still there? -
MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
Flash player download web site not working
After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
> -
Virtual host _defaultVHost_ is not available
Hi,
I just installed FMS2 and placed in a dummy sharedBall
application. I can connect to the app once, but every single
connection after that one fails and I see this in the edge.00.log
file:
2006-09-14 17:04:53 26981 (i)2631213 Connection rejected by
server. Reason : Virtual host _defaultVHost_ is not available. -
2006-09-14 17:04:53 26981 (w)2641213 Connection rejected by
server. Reason : [ Server.Reject ] : Virtual host _defaultVHost_ is
not available. -
And then I see this is master.00.log
2006-09-14 17:02:00 26968 (i)2581221 Core (27589) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27589)
_defaultRoot_:_defaultVHost_:: experienced 1 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581221 Core (27726) started,
arguments : -adaptor "_defaultRoot_" -vhost "_defaultVHost_" -app
-inst -conf "/usr/local/macromedia/fms/conf/Server.xml" -name
"_defaultRoot_:_defaultVHost_::". -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
2006-09-14 17:02:31 26968 (w)2581256 Core (27726)
_defaultRoot_:_defaultVHost_:: experienced 2 failure[s]! -
2006-09-14 17:02:31 26968 (i)2581223 Core (27589) is no
longer active. -
2006-09-14 17:02:31 26968 (i)2581223 Core (27726) is no
longer active. -
Can anyone shed some light as to why I'm getting these
failures?
Thanks in AdvanceHi,
I sent you an email, maybe it's in your spam box though.
Thanks!Dany
Date: Wed, 4 May 2011 03:03:49 -0600
From: [email protected]
To: [email protected]
Subject: Connection rejected by server
@http://forums.adobe.com/people/Chicohuman , if you are referring to your RTMFP issue that we are discussing on the other forum post, then that is entirely different from this one, because it is FMS 4.0 in your case (FMS 2.0 in this post's case) and its RTMFP in your case (RTMP in this case). Or are you saying you are also finding connection rejects with RTMP as well ?
I would like to know if the original problem of connection rejects are still happening with VHost being unavailable ?
Thank you !
> -
I finally figured out how to get the virtual hosting piece to work in
wls811. Now I have a question about the console presenting me with some web
app information. The Web Application Modules node and the Deploy tab shows
me the application is deployed to the server and it's Active, however the
console indicates the web app is not deployed to the virtual host and is
inactive. But the server is resonding to requests for each of my Virtual
Host Names, so they must be deployed to the virtual hosts as well.
Anyone with some ideas? Thanks.do you see any deployment exception in the server.log ? if nothing please post the web.xml and sun-web.xml
-
ASA-5505 Site-to-Site Not Working
I am somewhat new to Cisco but to do have some experience. I am trying to connect two ASA 5505's together via site-to-site VPN. They are configured with public IPs and all other services are working. I have used the VPN wizard on both boxes successfully but the tunnels are not working. The two devices are on the Comcast network. Any help would be appreacited.
Site A: ASA 5505 w/50 User license
Site B: ASA 5505 w/10 User license
Site A Config:
ASA Version 8.2(5)
hostname *********************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.XXX.XXX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username user1 password tTq7bIZ.C4x0j.qv encrypted privilege 15
username ********* password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: end
Site B:
ASA Version 8.2(5)
hostname ***************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.242.182 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username ************** password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: endHi Kevin,
Both the sides have IP address of 173.10.XXX.XXX on the respective Outside interfaces and you have configured the peers for 173.12.X.X.
Please ensure the correct IP addresses for VPN peers are configured , via the following command:
crypto map outside_map 1 set peer X.X.X.X
e.g. If you have 173.10.X.X on Site X and 173.12.X.X on Site Y , then
On Site X, peer would be
crypto map outside_map 1 set peer 173.12.X.X
and the tunnel-group will be
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
On Site Y, peer would be
crypto map outside_map 1 set peer 173.10.X.X
and the tunnel-group will be
tunnel-group 173.10.XXX.XXX type ipsec-l2l
tunnel-group 173.10.XXX.XXX ipsec-attributes
pre-shared-key *****
Also , the nat exempt would be complimentary on each other i.e.
On Site X,
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
On Site Y,
access-list inside_nat0_outbound extended permit ip Ghost_Flower_Inside 255.255.255.0 San_Mateo_Inside 255.255.255.0
Hope that helps.
Regards,
Dinesh Moudgil -
Adobe Support: Please Read, New Flash Not Working
Adobe, please read this. My Flash player is not working and I would be happy to help you troubleshoot. I have a completely fresh install of Windows XP on a Dell Laptop and the new Flash Player is not working. I am in the tech field so I will understand most of your requests...Here is my situation.
The problem began just after Christmas when I returned home from holidays and tried to watch videos, which I do all the time for both work and pleasure. Videos would not play in a watchable manner...I could hear audio but video was completely choppy and unwatchable. I researched and researched and implemented many suggestions but to no avail. Thus, I COMPLETELY rebuilt my system from scratch. (I needed to do this anyway since it had been 2 years.)
After the rebuild, on a completely fresh install of XP on a Dell D410 laptop (that was playing all videos just fine a week ago), I installed Firefox, went to youtube which prompted me to install Flash, and then had the exact same problem that I had before the complete reinstall of everything. There are scarecely any variables here other than the Dell Laptop, a standard Windows XP SP2 build, Firefox and Flash.
I think I have narrowed this problem down to two things. One, the new version of Flash.
It's choppy on youtube AND it's choppy on megavideo, the other place where I watch a lot videos.
I then tried on IE, which also prompted for the new version of flash, and also had the same problem. Chrome--same result.
However, this problem cannot be a universal problem with Flash otherwise nobody would be able to watch any videos onlline.
This leads me to the second problem, which a complete hypothesis but it seems to be the only thing left: my Dell laptop.
I have noticed that some of the other folks with reported problems, who mention their system type, are also using Dell laptops. Mine is an older d410, but as I said, it was running every video just fine up until a week or so ago when all of the sites forced me to install the new version of Flash. Most Dell laptops use a common video driver set and this is what is leading me to this conclusion.
So, could this be a problem with the new Flash and Dell laptops (or systems that use a common video driver)? As a reference point, my "display adapter" says "Mobile Intel (R) 915GM/GMS,910GML Express Chipset Family".
Viewing videos is part of my job (and entertainment) and I cannot do anything right now.
Someone out there...please hlep. Adobe, where are you? We are here providing you with all of the information that you need....Thank you for this response. Apparently, Adobe does not provide support since this is a free product.
However, Adobe, I need your help.
In summary, I have a fresh build of Windows XP, SP2 on a Dell D410 and the Flash player does not work. This affects at least 50% of the sites I visit. Right now, I simply have the Flash Player uninstalled and can surf the net rapidly. Once I install it, I am back to a crawl and still cannot affectively watch any videos (they all have extreme video choppiness but the audio is fine).
I need your help, Adobe. Everything was working fine until 2 weeks ago. It is unfair of you to distribute a product like this, force everyone to use it, and have it not work for some of us.
So far, this free product has cost me hundreds of dollars as a good part of my job is reviewing videos.
Many have suggested that I buy a new computer to fix the problem.
Is this really necessary?
Adobe, I am a man in need...please help me...
(PS: I am not the only one. I have also entered my problem here http://www.google.pl/support/forum/p/youtube/thread?tid=6039f438d085295f&hl=en&fid=6039f43 8d085295f00047c7e3182b625 to no avail.
And I have done more research than you can imagine. Here are a number of sites where people are reporting problems with Flash:
Streaming videos are choppy all the sudden.... - CPUs - CPU-Components How do I resolve choppy/jerky video in Firefox? - YouTube Help Videos are choppy, Audio distorted. - YouTube Help DIYnot.com > Youtube stopped working "JavaScript turned off" youtube is not working - YouTube Help Flash sound stopped working. | Ask MetaFilter Anyone have problems with Youtube freezing? - Software - Non-Gaming - Discussion Forum | Eurogamer YouTube videos freeze after a second - Google Chrome Help My Comments on Video Problem Flash Player 10 memory leak!! Graphics - Customized computer manufacturer graphics driver is detected AfterDawn.com: Guides: How to play FLV files Adobe Forums: Adobe Support: Please Read, New Flash... Adobe Forums: Flash Stopped working
Obviously, I have still not found an answer to my problem. Please help me.
Thx,
Richard) -
IE 11 - Open in new Tab Not Working
When I click on a link that should open in a new tab (or right-click and select Open in new Tab), IE11 Opens a new tab but the screen is blank, the URL is about:blank and the tab title is 'Blank Page'.
Windows 8.1 x64
Internet Explorer 11 (Desktop)
The 'Metro' version of IE 11 still works fine, it's just the Desktop version which is broken.
I've tried all the fixes listed in the similar thread, but none have helped.
IE 11 TABS NOT WORKING
IE 11 opens blank tabThanks, I ran a Command Prompt (Admin) and ran the following scripts:
ie8-rereg.32on64.cmd
ie8-rereg.64on64.cmd
Both seemed to execute correctly, but haven't made a difference.
Unfortunately they have never been a complete repair and now, due to security/obscurity have been made even less effective. There was an example in here a while ago in which the poster helped me see that exploiting the original manifests might have
been a better tack for a repair. IIRC they uncovered some registry corruption which seemed related to mshtmled.dll but which was not repaired by registering that module and was damage which was only hinted at by looking at the manifest.
The poster's repair was found by comparing registries from otherwise identical systems...
OMG look what this recollection has dredged up: <lol/>
http://social.technet.microsoft.com/Forums/ie/en-us/08f7a0f7-6f4b-4def-b399-12a0c281655a/ie9-wont-open-pages-just-give-a-new-tab-thats-blank?forum=ieitprocurrentver
Interestingly, I came across another oddity which might indicate the behaviour is some sort of change to the IE security settings. On a site I frequent http://www.makegamessa.com/ none of the links work.
They've all previously worked and they still work in other browsers, just not my IE. If you click a link it is supposed to open the page in the current window (i.e. not opening a new tab), but nothing happens. However, if I have the F12 developer tools open,
then the links all work as expected OR if I add the site to Trusted Sites the links also work.
That sounds like Active Scripting is inhibited. Scripting would be disabled in a Restricted security zone or in an Internet zone which was set to High level. Scripting would be enabled in a Trusted security zone. Scripting would be required
in order to use IE11 Developer Tools since that is its implementation. It hadn't occurred to me that that might provide an override for Scripting which had been otherwise inhibited.
FYI
Robert Aldwinckle -
I have copied code from one set of files that work and pasted them into another set of files and they do not work. The site I am developing is for an artist. You choose your medium and a field of pictures appear. When you choose an image it enlarges. From there you can go to previous, next or exit. Previous and exit works, but next does not. I have no idea why.
Working:
stop();
previous_mc.buttonMode = true;
previous_mc.addEventListener(MouseEvent.CLICK,pi)
function pi(e){
Loader(this.parent).load(new URLRequest("/fla/water/individual/graphiteWater17.swf"));
next_mc.buttonMode = true;
next_mc.addEventListener(MouseEvent.CLICK,ni);
function ni(e){
Loader(this.parent).load(new URLRequest("/fla/water/individual/graphiteWater2.swf"));
exit_mc.buttonMode = true;
exit_mc.addEventListener(MouseEvent.CLICK,exit);
function exit(e){
this.parent.parent.removeChild( this.parent );
Not Working:
stop();
previous_mc.buttonMode = true;
previous_mc.addEventListener(MouseEvent.CLICK,pi)
function pi(e){
Loader(this.parent).load(new URLRequest("/fla/leaves/leavesGraphite/individual/smallleaves7SOLD.swf"));
next_mc.buttonMode = true;
next_mc.addEventListener(MouseEvent.CLICK,ni);
function ni(e){
Loader(this.parent).load(new URLRequest("/fla/leaves/leavesGraphite/individual/smallleaves8SOLD.swf"));
exit_mc.buttonMode = true;
exit_mc.addEventListener(MouseEvent.CLICK,exit);
function exit(e){
this.parent.parent.removeChild( this.parent );
I would also like to get rid of the long string - "/fla/leaves/leavesGraphite/individual/smallleaves8SOLD.swf" - but it will not let me. The file calling this is in "/fla/leaves/leavesGraphite/ so I would like to put "/individual/smallleaves8SOLD.swf"
I hope someone can help.
Thanks,
RichardAre you getting error messages regarding dupicated functions? For your last wondering regarding the lengthy path, when you are loading files with Flash in a web page, the html page defines the base of operations for target files. So regardless of where your main swf is, when it is in the html page, it needs to target files it is loading as if it is in the same folder as the html file.
-
SB X-Fi Extreme new driver not working
Win 7 64 bit , Dell XPS 730. The atoprogram installed new drivers( A very large file) and now th esoundsystem does not work? a lot of noise and low level. Anyone any suggestins? Thanks Curt
Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks
Maybe you are looking for
-
Classloader caching in signed applet is very slow and weird
I have a signed applet running in the 1.4.1_01 plugin environment, and I'm getting the following kinds of messages when I use debug mode 5 in the console: Connecting http:[myserver]/someclass.class with no proxy Connecting http:[myserver]/someclass.c
-
How can I save a PDF from yahoo mail app in iphone5?
Hi everybody!!! I am asking what the title says... I want to save a PDF doc from yahoo mail app in my iphone5! How can I do it? I have ibooks and adobe reader but no luck.... Any suggestions? Thanks a lot!
-
Error on jsp page (but works great on my desktop)
Hi guys, Here is a weird thing that happened (it's always weird :-) ). I built a simple application j2ee) which runs perfectly on my desktop. When I copied the webapp folder (Test) under the tomcat/webapps folder to my laptop (same directory) I get t
-
We run two separate Webview reporting servers and on one of the servers Jaquar constantly needs resetting and sometimes causes the necessity of a reboot of the server. We have been told that too many users are accessing the server at one time. My
-
I keep getting a blank page when i pull up firefox and it will not go to websites
whenever i bring up firefox it is a picture of my puppy or a blank page. if i try to visit a website it will not even go to it that page just stays at the picture or the blank page. ive removed firefox and installed it again and it keeps doing the sa