Virtual host (vod) map location of files

I have my virtual host working in Adobe Interactive Server 4.0 however:
inside of my virtual host:
myvid1.domain.com
/opt/adobe/fms/conf/_defaultRoot_/myvid1.domain.com/
I have these directories & files
-rw-r----- 1 fms fms 55318 Aug  2 15:12 Application.xml
drwxr-xr-x 2 fms fms  4096 Aug  2 19:17 live
-rw-r----- 1 fms fms 55318 Aug  2 12:49 Org_Application.xml.bak
-rw-r----- 1 fms fms 15811 Aug  2 10:48 Org_Vhost.xml.bak
-rw-r----- 1 fms fms 15960 Aug  2 19:25 Vhost.xml
drwxr-xr-x 3 fms fms  4096 Aug  2 19:16 vod
I have the vod and live directories
however my virtual host is not pulling the data from the (vod directory)
is there another file that needs to be changed to read from this directory?
Any help would be great.
thanks

I was told by one of the Adobe people when we purchased the Interactive Server to copy the 'live' and 'vod' under the virtual host directory.
Thank you for letting me know this is not needed here, I will get rid of them.
The server pulls data from the following:
/opt/adobe/fms/applications
the 'live' and 'vod' directories the data is being pulled from here.
The connection is successful, however I want each 'virtual host' to pull from its own data directory so the user data will be isolated and not viewable.
How can I successfully change the 'vod' and 'live' directory on each virtual host this is my objective.
So then I can change ownership of the 'vod' directory and create a username/password for the site owner to ftp data to the server.
Lastly, is the main.asc (that is where the user name and password goes to prevent anyone from streaming live to the server?
/opt/adobe/fms/applications/livepkgr
[sysadmin@fmsvideo01  livepkgr]# ls -l
total 24
-rwxrwxrwx 1 fms fms  733 Jul 29 09:57 Application.xml
drwxrwxrwx 3 fms fms 4096 Jul 29 09:57 events
-rwxrwxrwx 1 fms fms 3941 Jul 29 09:57 main.asc     <-  -   -   -  -   (is this the security file)???
What I want to do is incorporate this code to prevent unauthorized connections to publish live to the server.

Similar Messages

  • How to create and access a Virtual Host on the J2EE WAS?

    Hello, I have searched through the Forums and help.sap.com and found a lot of information on how to set up a Virtual Host on the J2EE server but am having issues with it working.
    The goal is to provide a simple virtual host on the J2EE Portal server to host some static image and HTML files. Previously I had stored these files in the standard publicly accessible SAP J2EE folder location /usr/sap/<SID>/JCxx/j2ee/cluster/serverx/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/. This location is resolved to when using the URL <host>:50000 for example.
    The main issue here is that during Portal support pack applications this folder gets wiped out and we have to remember to save off any custom files and folders in this location and replace them.
    I would like to create a virtual host to store these static files (i.e., branding-image.jpg, etc...).
    I have run through the process of creating the virtual host both using Visual Administrator and <host>:50000/nwa but am not able to get the virtual host name to resolve properly.
    The following are the steps that I have taken. Let's assume the standard SAP portal (i.e., xSS, etc...) is running properly on <host>:50000.
    1. create virtual host via Visual Administrator/NWA called 'sapwebserver1' by using the Create Host option (takes on the attributes of the 'default' standard virtual host)
    2. change the root directory for this virtual server to a custom folder at E:/tmp/mimes (where E:/usr is where the J2EE files are all installed), no start files were set up and nothing else was changed in the new virtual host record, no permissions were changed on the /tmp/mimes folder from whatever the default Windows user permissions are normally set, I am using a local Windows  administrator account but I have not seen any reference in the help files or the examples that indicate that any specific permissions updates need to be made on the virtual host root folder
    3. restarted the J2EE server as well as the HTTP Provider service
    4. before updating the company DNS, I wanted to test this locally on the server and so have updated the server's local HOSTS file with a <host IP address>   sapwebserver1 entry
    5. from that server I can ping the sapwebserver1 virtual host name and it resolves properly to the machine's physical IP address
    According to all of the documentation and examples I have seen I should now be able to (from that server) launch a browser and access the static files in the virtual host by referring to http://sapwebserver1:50000/branding-image.jpg for example. This is not working and the browser just brings up a Cannot display the web page error in IE. By referring to the virtual host name sapwebserver1:50000 it's supposed to hit the J2EE server and based on the host name sapwebserver1 realize that it should resolve to the root directory E:/tmp/mimes. This is not happening. Just as a test I have created a copy of the 'default' virtual host and called it sapwebserver2, updated the local HOSTS file for this entry, and tried to see if that would work like the 'default' host. My expectation was that http://sapwebserver2:50000 would behave the same was as http://<host>:50000 but it too fails to resolve just like the sapwebserver1 virtual host refernce.
    Would anyone happen to have any pointers on what to do next? I just want a simple virtual host to be able to serve up some static images and files.
    Thanks for any insight or assistance you might be able to provide here.
    Graham

    This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
    We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

  • Virtual Hosts for Load Balancing

    Hi all,
    So I have two identical servers, that have SOA Suite installed pointing to the same database. (RHEL 4) I have configured the mod_oc4j.conf file for round robin, and then I created a virtual host on the httpd.conf file to point to the load balance hardware.
    It worked! But with a slight issue. The Load Balance server is orasoaqa.tmpw.net:7777, which opens the main Application Server page. However, when I click on BPEL console, or ESB, it continues using the orasoaqa.tmpw.net:7777 virtual, which of course, breaks even trying to login.
    What am I missing here? Here's the entry I added to mod_oc4j.conf:
    Oc4jSelectMethod roundrobin:local
    Here's the entry I added to the httpd.conf on server 1:
    Port 7777
    Listen 7777
    NameVirtualHost XXX.XXX.XXX.XXX:7777
    <VirtualHost orasoaqaapp101.ma.tmpw.net:7777>
    ServerName orasoaqa.tmpw.net
    ServerAlias orasoaqaapp101.ma.tmpw.net
    Port 7777
    </VirtualHost>
    and on server 2:
    Port 7777
    Listen 7777
    NameVirtualHost XXX.XXX.XXX.XXX:7777
    <VirtualHost orasoaqaapp102.ma.tmpw.net:7777>
    ServerName orasoaqa.tmpw.net
    ServerAlias orasoaqaapp102.ma.tmpw.net
    Port 7777
    </VirtualHost>
    Yes, the port for Application Server and the port on the Load Balancer are exactly the same, I hope this isn't the issue.
    Any help would be greatly appreciated.
    Thanks!
    Message was edited by:
    CooperHawkes

    Seeing that you have an external load balancer available, you really should not be trying software load balancing. Windows NLBS is a software based load balancing and is not really dependent on the physical/virtual hosting of the OS. There are certain gotchas
    w.r.t the NLB modes since they depend on network protocols such as arp, propagation of MAC addresses and usage of the MAC in the L2 routing tables of network devices.
    You should be taking the help of the cloud service provider as ONLY they would have an understanding of their underlying networking infrastructure such as VLANS. addressing, routing rules and such.
    You could also refer to the VMware support forum for KB's such as
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006580
    Most importantly, NLBS is a base OS related service and you're more likely to get a response in the Windows Server Forum. In the specific case of BizTalk, the Windows NLB is only used for hosting the out of process services such as those associated with
    HTTP/s Receive, orchestration published as schemas, web services (asmx) and/or WCF endpoints.
    Regards.

  • Apache-weblogic bridge problems with virtual hosting

    Hi,
    Can we set apache-weblogic bridge where apache webserver is configured
    as virtual hosts and each Virtual Host is mapped to a WebLogic server
    instance running on separate port ?
    Please provide doc or reference or your comments if you have solved this
    problem
    Thanks
    Shriniwas

    The above comments notwithstanding, there's one outstanding line in your post that seems crucial:
    Also if I type on my browser the name of another secondary (or virtual) domain name in the form http://domain2.com it brings the website hosted under the primary domain which is domain1.com. In case I type http://www.domain2.com than it works as it should and displays the website hosted under this domain name.
    As far as Apache is concerned, 'domain2.com' and 'www.domain2.com' are completely separate entities. They have to be otherwise if all domain2.com traffic went to this site you'd never be able to host different sites within the domain (e.g. blogs.domain2.com, wiki.domain2.com, blah.domain2.com, etc.). In other words, there is no automatic relationship between a hostname and sub-records of that hostname.
    So what's happening here is Apache is seeing a request for 'domain2.com' which does not match any of its configured virtual hosts, so it handles the request via the default site. If you request www.domain2.com this matches your virtual host configuration so Apache serves the alternate content.
    The fix is simple - trivial, even - you just need to tell Apache all the hostnames that match this site - in this case if you've configured the site's primary address as 'www.domain2.com' and you want it to also respond to requests to 'domain2.com' then add 'domain2.com' to the list of Server Aliases in Server Admin.

  • Virtual Hosts Issues

    I have a fresh install of Mac OS X 10.4 Server, and am having some problems setting up virtual hosts. I have 2 sites I'd like to host. Both are configured under the Sites tab of Web services. Both are pointing to different web folders. Both are using the same IP (the only IP this server has), and both are using port 80.
    Regardless of which site I try to access, I always get the first sites default page. I've already checked to make sure it's not a caching issue, and I have turned on the vhostaliasmodule.
    I've read through some old posts on this subject, but haven't found a solution that works yet. Any one know how to resolve this? Thanks!

    Ha!
    I finally figured it out.
    In httpd.conf, at the end of the file there's a section stating to use all of the .conf files in the /etc/httpd/sites directory. Seemingly, Mac OS X Server sets up every site as a virtual host, and creates a .conf file for each site in this directory. The issue ended up being that the directive in http.conf was:
    Include "/etc/httpd/sites/*.conf"
    I removed the quotes and both of my virtual hosts are working now.
    I don't know if this is a bug, or if there's supposed to be some other way to make this work.
    Thanks for the help from all of you!

  • Virtual Hosts configuration in JServ.conf

    I was trying to configure virtual hosts in the Jserv.conf file like this:
    NameVirtualHost 138.1.104.151
    # directives for vhost1
    <VirtualHost 138.1.104.151:10001>
    ServerName gsyang-lap.xyz.com
    <IfModule mod_jserv.c>
    ApJServDefaultHost gsyang-lap.xyz.com
    ApJServProperties "C:\ORCL\ias\Apache\Jserv\conf\jserv_1.properties"
    ApJServLogFile "C:\ORCL\ias\Apache\Jserv\logs\mod_jserv_1.log"
    </IfModule>
    </VirtualHost>
    # directives for vhost2
    <VirtualHost 138.1.104.151:10002>
    ServerName gsyang-lap.us.oracle.com
    <IfModule mod_jserv.c>
    ApJServDefaultHost gsyang-lap.xyz.com
    ApJServProperties "C:\ORCL\ias\Apache\Jserv\conf\jserv_2.properties"
    ApJServLogFile "C:\ORCL\ias\Apache\Jserv\logs\mod_jserv_2.log"
    </IfModule>
    </VirtualHost>
    After I saved the file and tried to stop/restart the Apache server, I got any warning, saying:"NameVirtualHosts 138.1.104.151 has not virtual hosts". Any idea as to how to fix this problem? Thanks in advance.
    Sunny

    Hi,
    This seems to be a SO error more than an IAS error.
    Have you tried stopping the iAS Server and looking for and old process still running?
    It may not be a problem with the file open limit, but may be the one it is trying to user is still in use by and old process.
    Carlos

  • Jk_mod configuration in virtual host

    Hi,
    I met a strange problem.
    Apache has several virtual hosts. Each virtual host has its own configuration file, which is "included" into main httpd.conf .
    If I define JkMount directive in virtual host conf file inside <VirtualHost>, it does not work.
    If I move it to the httpd.conf at the top level, it works fine.
    Could you help me out to launch it on <VirtualHost> level.
    Thanks.

    Hi there,
    I just wanted to clarify my question, has anyone been able to use group authentication using OID to restrict access to websites hosted using AS10g? My website is just plain html, but maybe someone has done something similar by adding a java wrapper to perform the authentication (that seems like overkill to me but maybe there is a more elegant workaround)?
    Thanks,
    Karen

  • Apache server - tomcat - jk, virtual hosts, database/context.xml question?

    Hello,
    I have an web application that runs perfectly in Tomcat 5.5 when running tomcat stand-alone.
    I also have Apache HTTP server integrated with Tomcat using the jk connector and running virtual hosts in a mod_jk.conf file, which is working for html files. When I run apache and tomcat at the same time, the jsp opens but the servlet cannot get a database connection.
    To run virtual hosts and apache and tomcat, I added this host container to server.xml:
    <Host name="www.mydomain.com" debug="0" appBase="d:/WebApps/mydomain"
    unpackWARs="true" autoDeploy="true">
    <Context path="" docBase="" debug="0"/>
    </Host>
    Does anybody see anything wrong with this? Is there some reason why the context.xml (which contains the database info) is not being read?
    Any suggestions are greatly appreciated.
    Thank you,
    Logan

    Hi,
    In the docmentation of Tomcat 5.x is written that is not recommended to put <context> element in the server.xml file. Create a file in CATALINA_HOME/conf/Catalina/www.mydomain.com/ with an XML extension. For example context.xml. In files like this you should write all of your <context> elements.

  • Struggling with Apache Virtual Hosts

    Hi Folks,
    I'm having trouble getting Apache virtual hosts to function
    on my work PC.
    PHP works. The PHP info page loads fine. I just can't get any
    virtual hosts
    to function. Get "Cannot find server or DNS Error."
    The identical configuration on my home machine works fine.
    Some details
    below.
    Windows HOSTS file:
    127.0.0.1 localhost
    127.0.0.1 mvhms
    Apache 2.0 virtual host settings in httpd.conf file:
    # Use name-based virtual hosting.
    NameVirtualHost *:80
    # Edited by Phil 3/15/2007
    <VirtualHost *:80>
    DocumentRoot c:/htdocs
    ServerName localhost
    </VirtualHost>
    <VirtualHost *:80>
    DocumentRoot c:/htdocs/mvhms
    ServerName mvhms
    </VirtualHost>
    Any help greatly appreciated. Thanks.
    Phil
    Work PC is on a LAN
    Windows XP Pro
    Apache 2.0.59
    PHP 5.1.6
    Reference: PHP for Dreamweaver 8

    Hi Bev,
    I tried various local IP addresses with no luck.
    However, I do think it may be a local LAN or HOSTS file
    issue. If I remove
    the proper references from my home HOSTS file, I get the
    identical behavior
    as my work machine.
    Is there a Windows HOSTS file bypass or Group Policy setting
    that our IT
    department may have changed?
    Phil
    "bsoliman" <[email protected]> wrote in
    message
    news:etcioa$839$[email protected]..
    > You're welcome, Phil.
    >
    > Hmmm, in that case then I'm stumped too. If the exact
    same setup is
    > working
    > for you at home, then I have a sneaking suspicion that
    it has something to
    > do
    > with being on a LAN. Unfortunately, that's just a gut
    instinct and I
    > couldn't
    > tell you what the acutal problem might be. Hopefully
    someone else will
    > come
    > along that can help you out.
    >
    > This is a total shot in the dark: Why not try changing
    127.0.0.1 to your
    > machine's IP address on the LAN? I'm obviously grabbing
    at straws here,
    > but I
    > figure trying something (no matter how farfetched) is
    better than sitting
    > around feeling aggravated while waiting for help :-)
    >

  • Working with virtual host & hosts files on a local network

    I'm setting up a small local web and production server here in my office running Leopard.
    I'm setting up virtual hosts for users on the network to review and comment on websites in development. Ideally they'd access it as:
    host1.webserver.local
    host2.webserver.local
    host3.webserver.local
    Problem is, users on the network can see webserver.local just fine, but the subdomains need to be registered with hosts file on each computer.
    Is there a way I can manage all computers hosts file easily? I was thinking of an SVN repository, but this still requires going to each computer to update the file.
    Any suggestions here would be great.
    Thanks
    Rich

    Hi jscher2000
    Thank you for your interest.
    I am using "manual prxoy configuration" option in firefox with port 8080. I have tried the option of "Use system proxy settings" but it doesn't help.

  • Mapping Virtual Host to WebApp

    Hi,
    Does anyony know how to accomplish the following:
    - Have two virtual hosts on one server:
    dev.example.com and test.example.com
    - Create two OC4J containers on the AppServer
    (one for DEV and one for TEST)
    - Deploy two different versions of an EAR file
    to the DEV and TEST containers.
    Make sure that http://dev.example.com/application leads to the development version and http://test.example.com/application leads to the test version.
    So, the only distinction between the two is the host-name and the rest of the URL is supposed to be the same. How can I then make sure each URL leads to the appropriate webapp?
    Thanks

    Wilfred,
    This should work for two url's going to different sites/pages
    The following is from the httpd.conf file on my devl/test server:
    <VirtualHost *:7778>
    ServerName host2.home.com
    DirectoryIndex host2.html
    Port 80
    RewriteEngine On
    RewriteOptions inherit
    OssoConfigFile c:\oracle\oramid\Apache\Apache\conf\osso\osso_host2.conf
    OssoIpCheck off
    DocumentRoot "c:\Oracle\OraMid\Apache\Apache\htdocs"
    </VirtualHost>
    <VirtualHost *:7778>
    ServerName host1.home.com
    DirectoryIndex host1.html
    Port 80
    RewriteEngine On
    RewriteOptions inherit
    </VirtualHost>
    --in the next entries replace the http://....with the site you want the users to be redirected to.
    Redirect /host2.html http://host2.home.com/portal/page?.....
    Redirect /host1.html http://host1.home.com/portal/page?.....
    I had to make all the changes directly to the httpd.conf file through OEM (directly to the file should work also). Tried the virtual hosts entries through oem to add the “DirectoryIndex” information but they kept discarding changes from each other….
    Make sure the corresponding entries for the DirectoryIndex match the Redirect. The actual files don’t have to exist, Apache will look for them since that is the VirtualHost entry and redirect to the url specified in the Redirect.
    Now when I enter http://host1.home.com I am taken to the Page specified in the redirect and when I enter http://host2.home.com I go to the page specified in that redirect.
    Still have the logout issue “returning” to the default home page for the system. I'll be using a page with references to the existing sites with the addition of something that says “..if you’re done you may close your browser..”
    HTH,
    Dennis

  • CT5760 - virtual-host in parameter-map not used in webauth redirect

    Hi all.
    I'll try posting my issue here before I post a TAC on this:
    Cisco CT5760 wireless controller running IOS-XE version 3.6.0.
    This issue is related to web authentication on an SSID with external web portal. It seems that the statement "virtual-host" in "parameter-map type webauth global" is not used as intended. I'll try to explain:
    When a user connects to an SSID with external web authentication enabled and the user opens a web browser, the user will get redirected to the external web portal for authentication. In this redirect URL we see the parameter "switch_url=http://1.2.3.4/login.html". The IP address 1.2.3.4 is, in this example, our virtual IP. But we have also configured "virtual-host" to be webauth.example.com. And in my opinion the "switch_url" parameter should be "switch_url=http://webauth.example.com/login.html". This is how it works on our old Cisco WiSM1 implementation.
    The reason why this is a problem is that the clients web browser will not accept the certificate installed on "http://1.2.3.4" because it is not issued with that IP address, only the hostname webauth.example.com. I know that it is possible to get certificates issued with an IP address (as long as it's not an RFC1918 IP address), but rumors say that many Certificate Authorities will stop issuing these soon, even with "real IPs". Therefore it is important that the redirect URL gets corrected.
    Does anyone disagree with me that this is a bug?

    Hi and thank you for your response.
    I feel that I need to clarify a few things. Here is my parameter-map config (a bit edited):
    parameter-map type webauth global
    virtual-ip ipv4 1.1.1.1 virtual-host webauth.example.com
    intercept-https-enable
    parameter-map type webauth webauth_external
    type webauth
    redirect for-login https://webauth-external.example.com/v2/login.html
    redirect portal ipv4 x.x.x.x
    So the problem here is that a web browser of the client gets the following redirect URL:
    https://webauth-external.example.com/v2/login.html?switch_url=https://1.1.1.1/login.html&redirect=http://www.cnn.com
    Then after a successful login on the external portal, the user gets redirected back to https://1.1.1.1/login.html. Here is the core of my problem. I think that the parameter "switch_url" should be with the name webauth.example.com since I configured it as the "virtual-host". This is the behavior we see with our old Cisco WiSM1.
    When the redirect goes to https://1.1.1.1/login.html the client complains about the certificate, because it is not issued to that IP address but to the hostname.
    I can verify that the client does not complain about this if I manually edit the redirect URL on the client to the following:
    https://webauth-external.example.com/v2/login.html?switch_url=https://webauth.example.com/login.html&redirect=http://www.cnn.com
    Then the redirect after authentication goes to https://webauth.example.com/login.html and the client accepts the certificate and everything is peachy.
    Do you see my problem? And yes, the virtual IP resolves to the name in DNS.

  • Virtual host & policy files

    1. How to config virtual host in weblogic server?
              2. Is Policy files needed for weblogic cluster?
              

    1. Virtual host is a new feature in WLAS6.0. It is not in WLAS451 & 510
              2. Every instance in WLAS cluster needs policy file. However, you can use
              share disk and config a global policy file so that every instance can access
              it. Personally, I prefer every instance accesses its own disk
              Hope it helps.
              Cheers - Wei
              "Andy Ping" <[email protected]> wrote in message
              news:[email protected]..
              > 1. How to config virtual host in weblogic server?
              > 2. Is Policy files needed for weblogic cluster?
              

  • Why are all virtual host files named "0000_" instead of incrementing numbers?

    I've created several virtual hosts using Lion Server's Server app.  Each .conf file that is created is prefixed with 0000_.  On SL Server, each vhost file was incrementally numbered, like 0001_, 0002_, etc.
    Is this a bug?  Or by design? 

    That can be caused by a problem with the HTTP response headers.
    Did it work before with a Firefox 8 version?
    Maybe something similar as this problem with Outlook Web Access:
    *[[/questions/894442]] OWA 2010/Firefox 8 and ASHX Attachments
    *[[/questions/895024]]

  • Virtual Host (localhost) + Wamp 2.1

    Hello
    I'm trying to test a local URL like xxxxx.localhost or loclahost / xxxxxxx
    This does not work.
    I read this post related to this topic:
    http://blogs.adobe.com/edgeinspect/2012/06/19/shadow-xip-io-virtual-hosts-workflow-simplif ied/
    But I do not know what to do.
    Thank you for your help.

    No change.
    Changes in the file are in bold and italics.
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned. 
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
    # server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default.  It is recommended that you always supply
    # an explicit drive letter in absolute paths to avoid confusion.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk.  If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "c:/wamp/bin/apache/apache2.2.17"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    #Listen 80
    Listen  0.0.0.0:80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule authn_alias_module modules/mod_authn_alias.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_host_module modules/mod_authz_host.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule cgi_module modules/mod_cgi.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule dav_module modules/mod_dav.so
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule disk_cache_module modules/mod_disk_cache.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule filter_module modules/mod_filter.so
    #LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule include_module modules/mod_include.so
    #LoadModule info_module modules/mod_info.so
    LoadModule isapi_module modules/mod_isapi.so
    #LoadModule ldap_module modules/mod_ldap.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule negotiation_module modules/mod_negotiation.so
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule rewrite_module modules/mod_rewrite.so
    LoadModule setenvif_module modules/mod_setenvif.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule status_module modules/mod_status.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    #LoadModule userdir_module modules/mod_userdir.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule version_module modules/mod_version.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule php5_module "c:/wamp/bin/php/php5.3.5/php5apache2_2.dll"
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch. 
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User daemon
    Group daemon
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. [email protected]
    ServerAdmin admin@localhost
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    ServerName localhost:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "c:/wamp/www/"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features. 
    <Directory />
        Options FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "c:/wamp/www/">
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.2/mod/core.html#options
        # for more information.
        Options Indexes FollowSymLinks
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   Options FileInfo AuthConfig Limit
        AllowOverride all
        # Controls who can get stuff from this server.
    #   onlineoffline tag - don't remove
        Order Deny,Allow
    #   Deny from all
        Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
        DirectoryIndex index.php index.php3 index.html index.htm
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
        Order allow,deny
        Deny from all
        Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "c:/wamp/logs/apache_error.log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel debug
    <IfModule log_config_module>
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        CustomLog "c:/wamp/logs/access.log" common
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #CustomLog "logs/access.log" combined
    </IfModule>
    <IfModule alias_module>
        # Redirect: Allows you to tell clients about documents that used to
        # exist in your server's namespace, but do not anymore. The client
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://localhost/bar
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
        # ScriptAlias: This controls which directories contain server scripts.
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        ScriptAlias /cgi-bin/ "cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #Scriptsock logs/cgisock
    </IfModule>
    # "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        TypesConfig conf/mime.types
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #AddType application/x-gzip .tgz
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
        AddType application/x-httpd-php .php
        AddType application/x-httpd-php .php3
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #AddHandler cgi-script .cgi
        # For type maps (negotiated resources):
        #AddHandler type-map var
        # Filters allow you to process content before it is sent to the client.
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://localhost/subscription_info.html
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    #Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    #Include conf/extra/httpd-autoindex.conf
    # Language settings
    #Include conf/extra/httpd-languages.conf
    # User home directories
    #Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts (STE)
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    #Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    #NameVirtualHost 127.0.0.1
    #<VirtualHost 127.0.0.1>
    #        ServerName localhost
    #        DocumentRoot "C:\wamp\www"
    #</VirtualHost>
    NameVirtualHost 192.168.1.98
    <VirtualHost 192.168.1.98>
            ServerName 192.168.1.98
            DocumentRoot "C:\wamp\www"
    </VirtualHost>
    Include "c:/wamp/alias/*"

Maybe you are looking for