Virtual hostname already assigned to another system on the network
Sorry for the cross-post... I just want to make sure I get this in the right forum:
I am having trouble getting past the cluster configuration setup in Clusterware 10.2.0.1.0 on SLES9 -i386.
The following error explains it all:
The virtual hostname(s), dl560-3-vip,dl560-4-vip, you have specified appears to be already assigned to another system on the network. Please ensure that the virtual hostname(s) that you use for each of the nodes in the cluster are not in use currently.
Now if I remove the vip's from my /etc/hosts file, I can proceed to the next step... but I have to re-add them in order for it to resolve and continue.
Thanks in advanced for your help.
you shouldn't be able to ping those addresses .... ?Is that a question or a statement... :-) I'm not really sure.
Similar Messages
-
Hi,
I have removed a successfully installed Grid Infrastructure Software. Now I was again installing it but the Installer is complaining about "[INS-40912] Virtual host name assigned to another system on the network", which it was not complaining about in the first installation process. :/
EDIT: I have checked and the two cluster-nodes are interpingable through their virtual IP's.
I see that the previous installation has created an own interface for that virtual IP:
eth0:2
Link encap:Ethernet HWaddr 00:50:56:B9:0E:AA
inet addr:10.200.11.159 Bcast:10.200.11.255 Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:19 Base address:0x2000OK Solved: I just did:
ifconfig eth0:2 down -
Hi,
I am getting the INS-40912 error while installing clusterware software.
PFB my host file entry on rac node1
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# Public
192.168.0.151 rac1.localdomain rac1
192.168.0.152 rac2.localdomain rac2
# Virtual
192.168.1.151 rac1-vip.localdomain rac1-vip
192.168.1.152 rac2-vip.localdomain rac2-vip
# SCAN
192.168.0.251 rac-scan.localdomain rac-scan
And the ifconfig output on node1 is as below
[root@rac1 etc]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:A8:93:25
inet addr:192.168.0.151 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fea8:9325/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:245 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24422 (23.8 KiB) TX bytes:900 (900.0 b)
eth1 Link encap:Ethernet HWaddr 08:00:27:25:5B:4D
inet addr:192.168.1.151 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe25:5b4d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1180 (1.1 KiB) TX bytes:1404 (1.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:960 (960.0 b) TX bytes:960 (960.0 b)
Please provide your suggestions to overcome this error.Hi,
Your public IP address is correct. But your VIP should be on the same subnet like your public IP address.
eg :
public IP address : 192.168.0.1 ( where 1 is the ip address of node 1 which exists in the network and all nodes in this network can communicate with this IP. If you do a ping test to this IP address, it should ping)
VIP : 192.168.0.2 (where 2 is the vip of node 1 which does not exists in the network and its used for communicating only between cluster nodes. If you do a ping test to this VIP before installing the clusterware, it should not ping)
Additional info:
Private IP address: 192.168.1.1( for private IP address, the subnet should be different , but IP address should be same like in public IP address
Do the same configuration for all nodes, you will be able to install the clusterware.
Regards,
Pradeep. V -
Clipboard issue- Automatically copying content past into another system across the network.
Hi,
I am facing issue related clipboard in all windows platform in our organization. Say example: Person A copying something from any application or browser in his system and when he is going to past into another apps(word file or text file) in the same system,
its pasting some other text content, which is copied in another system, which is using by person B. Again Person B when is going to copy and paste something in his system, pasting content is from person C's system. It is happening in all system in our organization.
It is very terrific problem, which is seen first time in my life. It is happening intermittently in all system.
Our organization is mainly R&D and software development company, Developers using windows clipboard in local system, but not
in another system thru n etwork or LAN. I have installed updated windows patch, Forefront antivirus in all system and also run scan. Not found any virus. We are continuously trying to identify the issue. Yet we did not get any solution.
We are enterprise customer of Microsoft and we using many enterprise solution of Microsoft. I hope any one can help me on the same.
Thanks,
Nirupam DandapatHi Nirupam,
This is weird. Please disconnect the network from these computer to check if they work fine.
This is also might be caused by some third-party software conflict. In such situation, I would suggest you perform a clean boot in Windows clients to rule out the cause of third party programs.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support -
Extension is already assigned to another user on a dial plan.
I am unable to UM enable a user with a specific extension. I get the error that the extension is already assinged to another user. I cannot locate the number in the directory.
I have exported with Get-UMMailbox.. the extension is not in the export.
ldap query for msRTCSIP-Line gives no results.
ldap query for Telephone Number no results.
Lync ctrl panel search does not return any results.
Any advice is appreciated.
l1b3r4lI figured out my issue. This may be similar for others.
Scenario: I attempted to UM enable a Lync user that I assigned an "available" number. When I UM enabled I was presented with an error stating that the extension was already assigned to a user in the dial plan.
I did custom ldap searches for msRTCSIP-Line=tel:+1xxxxxx1234 - No results with this search.
I searched via the Lync ctrl panel filters for this number. - No results returned.
I attempted the proxyaddress=smtp: search via custom ldap search in ADUC. - No results.
What happened was a user was assigned Enterprise voice andded to a dial plan, then was moved over to the Aura system. WHen this happened the number was given back to the pool, the user was set as PC>PC only. This user did not have UM disabled
when removed from Lync Enterprise voice.
I was able to locate the user using the following commmands. I found the user disabled UM, then was able to provision the new user without issue.
The command to do so is as follolws: (plus bonus commands for your enjoyment)
get-ummailbox | ForEach { If($_.Extensions -eq 4322){$.DisplayName}}
get-ummailbox | where { $_.Extensions -eq "45873" }
Get-UMDialplan -Identity "DefaultDialPlan" | Format-List
Hope this helps someone!
Enjoy
l1b3r4l -
i cannot found iLife app on my macbook pro and when i want to buying it i cannot and i have this massage (These apps cannot be accepted by your Apple ID.These apps were already assigned to another Apple ID, and they will be available in that Apple ID's purchases list. If you don't have access to that AppleID and want to receive future updates, you will needto purchase the applications ) what i want to do now ? please tell me
Either use the Apple ID you used when you originally purchased the applications or you will have to purchase them using your Apple ID. If you did not have the other Apple ID, then you have the applications illegally or they were improperly included with a computer you purchased from someone else.
-
After updating to Mavericks, I have been unable to update iphoto, and when I attempt to, it says that These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. But no other appleID has ever been used on my computer, how could this be resolved?
Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.
-
The host name *** is already assigned to another Azure website
We have changed Azure Website which we want to assign to our domain, but get message The host name *** is already assigned to another Azure website.
All DNS settings are changed correctly.
I read from other forum posts that some entries must manually be changed by MS Support....or?
CRM Consultant/Business Advisor at Skill AS in Norway
RockStar365 profileHi,
For this type issue, I would suggest you to contact with azure support, it is a good choice, Please
contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
I have no other FCE on any computers...this is the only mac running (iMac 2008 model). I used a preference manager app and deleted preferences...didn't work. I uninstalled and reinstalled FCE...didn't work.
This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
Any ideas?There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
countrynewsman wrote:
I uninstalled and reinstalled FCE...didn't work.
That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
http://www.digitalrebellion.com/fcsremover/
If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
Hope it works out for you.
MtD -
The folder is already attached to another index of the same type
Hi,
I deleted an index in the portal and want now to created a new index with the same datasource, I get the following errormessage:
The folder is already attached to another index of the same type: datasourcename
Does anybody have an idea?
BR
StevenHi,
make sure you really don't see the index in KM anymore.
If this is the case you could try to delete the index with the TREX Admin Tool on the TREX host. Maybe first just have a look, if on the TREX side the index is still there. This would mean, that in KM the index was deleted but not on TREX.
But you should be sure what you do, when using the admin tool!
Maybe you should also test, if this was just a temporary problem, or if it occurs always when you delete an index.
Deleting an index should work fine from KM and using the admin tool should only be needed for this in rare cases.
Regards,
Sascha -
Logic already running on another computer on your network, won't open.
I'm trying to open Logic Pro on MacBook Pro and I get this: This application cannot continue because another application with an identical serial number is already running on another computer on your network.
I do have Logic installed on my iMac also but it's not running. Oddly, Logic will open on the iMac w/o the problem. anone got the answer? Thanks!Hi
I've had this when a Memory Server (Kontakt?) was still running even after quitting Logic.
HTH
CCT -
What does it mean when a popup indicates another device on the network is accessing my computer's IP address?
On a related note, if you have a lot of family devices that use your router and don't care about tracking one of them down, you can fix it easily.
1. Just click on the Apple Logo () in the top left of your screen and choose "System Preferences"
2. Click "Network" from the System Preferences window.
3. Click "Advanced..." from the bottom right.
4. Click "Renew DHCP Lease" form the "TCP/IP" pane on the window that drops down (it should already be on that pane).
5. Click "Ok" at the bottom, then "Apply" at the bottom.
That should ask the router for a new DHCP connection, which will prompt it to give you a new IP address that is not already in use.
If that fails to work for some reason, you might need some more advanced steps, or you might just track down the other device and restart it. -
Another device on the network is using my computer's ip address
My computer is saying "another device on the network is using your computer's ip address". What does it mean?
Hello,
It means that another device on your network (wireless or Ethernet) has the same IP address as your computer.
An IP address is A Internet Protocol address, a numerical label assigned to each device (e.g., computer, printer) participating in a computer networkthat uses the Internet Protocol for communication.
If this happens you would need to change your the IP address of the device, you can check what device by going to your router admin web page. Details depends on what router you own.
You can check your PowerBooks IP address by going to system preferences and network. If you connect by Airport check the IP address of the Airport card, else check the IP address of the Ethernet if that's how you connect to the Internet. -
Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.> * explorer.exe is blocked already, but users are able to enter the
> Windows Explorer by clicking on the name which is visible on the
> Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Can someone tell me why, since upgrading to Yosemite, I keep getting a message window saying "Another device on the network is using your computer's IP address?"
That may be what is a fairly common problem of 2 devices mistakenly assigned the same address. Try shutting off all of the devices connected to your router, reboot the router and then the devices connected to it.
Maybe you are looking for
-
Exporting PDF's - Initial View settings?
Hey all! Is there any way from InDesign CS4 to set the Initial View of the PDF when exporting your layout to a PDF? I would like to be able to set the display of the Navigation Tab, the Page layout, Magnification, and a few security settings. Is this
-
Hi, What is the meaning of different statuses of production order? Regards, Prashant
-
Help Oracle APEX Report Filter.
I have an report with oever 10,000 rows. Currently it is displaying 15 rows per page. I want to filter the report based on a value on one of the columns. When I click on the column, it shows a drop down list. The value I see on the report is not show
-
Why is my Adobe Photoshop Elements 10 not in English???
I just purchased the Adobe photoshop elements 10 from the Mac App store and without even changing the settings or anything, it just launched in polish or german or idont know what language....I have no idea what to do...PLEASE HELPPPPPP
-
What is the file size of photoshop cs6 set up
what is the file size of photoshop cs6 set up