Virtual hosts and mod_oc4j. Can someone from Oracle please answer, at least reply.

Can someone please explain how to configure mod_oc4j and virtual hosts. It can be done with mod_jk, but I am have major problems in getting it to work with mod_oc4j.

I am not sure about mod_jk so I won't touch that.
mod_oc4j introduces directives that have the scope of either default server or virtual host - just like most OHS (Apache) directives. By default, these directives are in a file mod_oc4j.conf, and this file is included at the highest level.
If you do want those mount points defined in mod_oc4j.conf to be available only to a certain virtual host etc., you can either create a mod_oc4j_vh1.conf file and have it included within the scope of the vh1 virtual host. Or, you can just define those directives right within the vh1 virtual host directive.

Similar Messages

Virtual Hosts and mod_oc4j. How is it done?

Can someone please explain how to configure mod_oc4j and virtual hosts. It can be done with mod_jk, but I am have major problems in getting it to work with mod_oc4j.

yes, I am also very interested in this thing. i could not find anything about that in the documentation.
greetings from munich, .thomas

Can someone from Adobe please explain why measurements in CS6 are not accurate..PLEASE?

I'm tired of wasting my time looking for reasons why measurements I key in are constantly changed to some arbitary number decided by Illustrator. I'm currently working on a 100mm x 100mm box with a corresponding grid and yet for some reason my measurements get changed to 100.238mm or 99.834mm or similar... I just wasted another 10 minutes trying to work out how to ask someone this question...am I the only one experiencing this...NO! Any answers Adobe, please?

The above answers are absolutely correct, because it was obvious @Brayhill had Pixel-Snap turned on.
Specifically for print work, where keying in values may sometimes not show correctly* in the Control Bar at the top, there is another little hidden setting in Preferences -> General -> Use Preview Bounds.
If you are doing millimeter perfect templates for example, and want the total to show for example 100 x 100mm, regardless of the stroke weight asigned, just uncheck the Preview Bounds box in Preferences.
*Checked will always add your stroke width (as well as some other effects) to the total shown in the Control Bar. This can also be very useful at times, say when you need to fit an entire group with strokes and effects within 100x100mm, like an advertisement.

Can someone from sky please call me back

I spent 50 minutes on the phone waiting to speak to a live human being. I spent 50 minutes listening to a machine talk to me and play music.
I wasted £30 of phone credit and still did not speak to a sky rep. To fix the broken internet
This is the worst customer service ever!
Why is sky charging customers to phone them, when its their fault that the service they provide is not working.
The phone calls to sky should be free
And if sky is too cheap to do that, which i find hard to believe considering they are a multi billion dollar telecommunications company, they should at least provide a complimentary request a call back service to their paying customers who are having technical difficulties due to their failure to do their job properly!!!!
Disgusted, does not even remotely describe my feelings about sky.

If you install the sky service app you can use it to request a call back.
Sky will not call you based on your post here as this is a customer helps customer forum on which they do not reply to posts on.

Can anyone from Nokia please answer why Nokia Lumi...

Hi, I've just learned about the full specifications of Nokia Lumia 820 and I've come to like it more than 920. What's bothering me is why it will not be having gorilla glass, just like its predecessor, Nokia Lumia 800.
Does Nokia have any surprises for its customers regarding this matter? Does Nokia Lumia 820 have some Gorilla Glass substitute that could also protect the phone's screen? Yes, there will be ruggedized shells, but they can only offer protection to the back of the phone from how I saw it in the images.
Well, it's just disappointing. I already got so hyped up about getting either Nokia Lumia 820 or 920 but both have major disadvantages. 820 does not have gorilla glass which makes it very prone to physical damages (unless Nokia has something up its sleeve), while 920 does not have a microSD and a user-changeable battery.
It would be nice if Nokia could give us some reassurance that the durability of 820 will not be defeated by its predecessor, because it would be lame if that would be the case.
Thank you.
Solved!
Go to Solution.

Hi,
As some have already stated, the screen of the Lumia 820 is made from a scratch-resistant safety glass, but in this case not Corning(TM) Gorilla Glass(TM).
Like all Nokia phones, this model has gone through extensive hardware testing before going to market, including tests to simulate the normal wear and tear of daily life, so the choice of glass used for the screen should not discourage you from buying this model if it otherwise meets your needs.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Can someone from Apple confirm sync issue.....

Q. Can someone from Apple please confirm that they are aware of some sync issues that is causing itunes 9.2.0.61 to crash???
Q. Can we expect a new version of Itunes any time soon?
I have iTunes running on a windows 7 machine & two ipod touches (Both 3G running the power draining IOS4). My ipod touch Sync's OK however my partner (who uses the same computer and software) has Itunes 'stop & quit' when trying to sync her music. The program quits out at the same point when it reaches the same music track. I did start removing the tracks that has the problem but it was getting to the point that I was removing a lot of stuff - stuff that plays OK in the iTunes software and previously sync'ed OK with the old software.
The most annoying thing is that Apple (as far as I have seen) isn’t even acknowledging any kind of problem. The same could be said of the ridiculous battery consumption under IOS4.

Ianuk01 wrote:
I find it quite bizarre that Apple affiliate themselves to a support forum and then have nothing to do with it? Everyone who logs into this support website does so with their Apple I.D, so why the he'll does this forum even exist if Apple have no technical input or can't be bothered to confirm or deny that they are aware of a problem. It's lazy and poor customer support....
Well, Apple's affiliated with it because it's their site, and about their products. That doesn't necessarily mean that they have to be a part of User Discussions. (after all, at least they aren't false advertising right?)
I mean think about it, Facebook is affiliated with your Facebook profile right? Does that mean that the Facebook owners are going to meddle with your personal affairs? Probably not.
I wouldn't consider these forums as CUSTOMER support, more as PEER support. Apple provides customer support other ways, by FAQs, Apple Stores, and Contacting Them. I'm not saying one way whether Apple is good or bad with this, I am simply stating they offer other customer support options.

The essential guide to DW cs4... by D. Powers: when from wamp to xampp+virtual host and having problems :(

Following the book in chapter 2 I think Ivé followed everything correctly, but have encluded all the things I've edited below.
I was using wamp with no problems but after trying to set up a virtual host and now using xampp im abit lost its probabsomething stupid but I can find the prob.
(This post is abit long and dragged out so I used some colour to try ease the reading..)
When I try to view a dynamic page in live view or in firefox I get the following error:
**when using:
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
result:
Access forbidden!
You don't have permission to access the requested object.     It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
thegoodlife
2009/10/13 12:47:48 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
*when using:
<VirtualHost *:80>
DocumentRoot c:/htdocs
ServerName localhost
</VirtualHost>
result:
Object not found!
The requested URL was not found on this server.          If you entered the URL manually please check your     spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
thegoodlife
2009/10/13 12:32:58 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
This is what I've done, blue indicating where I have or was meant to edit, red being the relivant context. (hope it helps )
1. Created a new folder called htdocs (C:\htdocs)
2. Changed the pathname to:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/htdocs"
and
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/htdocs">
3. Created vhosts folder; with a sub-folder called thegoodlife (C:\vhosts)
4. entered new vhost:
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1 localhost
127.0.0.1 dwcs4
127.0.0.1 thegoodlife
127.0.0.1 bin.errorprotector.com ## added by CiD
5.It says uncomment the command by removing the #, (Supplemental configuation.), but this is the origional file; already uncommented?
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
6.Set the permissions and changed the code as instructed, unsing (c:/xampp/htdocs) as advised.
# You may use the command line option '-S' to verify your virtual host
# configuration.
<Directory C:/vhosts>
Order Deny,Allow
Allow from all
</Directory>
# Use name-based virtual hosting.
##NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/dwcs4
ServerName dwcs4
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/thegoodlife
ServerName thegoodlife
</VirtualHost>
Then creating the site definition:
local root forlder: C:\htdocs\thegoodlife\
testing server folder: C:\vhosts\thegoodlife\
URL prefix: http://thegoodlife/
hope i've covered all area's where I could have gone wrong

Just one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again.

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

My account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account

my account is locked, i cant remember my security question, and I accidentally entered my itunes card in here instead of my other account, so can someone from apple help me out and fix my account (and no, i dont have any rescue email address or whatsoever)
please help me because i dont to waste money for nothing

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Can I call host file ( Unix Shell script ) from Oracle 10g trigger

Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
parag

user12009546 wrote:
Hi,
I am new to Oracle 10g. Can I call host file ( unix shell script ) from Oracle 10g trigger ?. I know it is possible. Pl explain me with small example
thanks & regards
paragIf you are in 10g, you can simple call shell script from DBMS_SCHEDULER:
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'TEST_SCRIPT',
job_type => 'EXECUTABLE',
job_action => 'PATH_OF_YOUR_SCRIPT',
start_date => SYSDATE,
repeat_interval => 'FREQ=MINUTELY; INTERVAL=1',
enabled => TRUE,
comments => 'Shell script from Oracle'
END;
/

Web sharing - virtual hosts and CGI

This topic might be a bit advanced for this forum, I'm not sure. But here goes.
I'm trying to set up my laptop to act like a web server so that I can do test development on it. I have two web sites, and have successfully created virtual hosts for each of them.
The part that I'm struggling with now is enabling CGIs, as I want to learn to write CGIs in Perl. I can't seem to find any site that discusses how this is done in Leopard. One said something like "just put the CGIs into /Library/WebServer/CGI-Executables and it'll work", but of course, since I've got virtual hosts defined, it seems that anything addressed to "localhost" defaults to the first virtual host and thus there is no way to refer to a CGI placed in that location. Besides which, I'd like to know how to enable CGIs placed in a folder on each of my virtual sites, so that I could test them in place.
Any ideas?

One said something like "just put the CGIs into /Library/WebServer/CGI-Executables and it'll work", but of course, since I've got virtual hosts defined, it seems that anything addressed to "localhost" defaults to the first virtual host and thus there is no way to refer to a CGI placed in that location.
That is an incorrect assumption.
By default, Apache is configured to recognize any URI that begins with /cgi-bin and serve that request via a CGI script in /Library/WebServer/CGI-Executables
This is true even though each site's DocumentRoot is set somewhere else on the file system (that's by design since it makes it harder for a remote attacker to affect your CGIs)
Since it does not matter which site the request was on, any /cgi-bin request would be served from there, so:
http://www.domain1.com/cgi-bin/some.cgi
http://www.domains2.net/cgi-bin/other.cgi
would both be served from /Library/WebServer/CGI-Executables even though they are for two different virtual hosts.
Now, of course, if you want each site to be separate and have its own set of CGIs (maybe some.cgi for domain1 does something different from some.cgi on domain2) then this approach causes problems. For this you will need to edit each site to have its own cgi-bin directory.
Unfortunately (although I haven't tested it) I think Matt's solution won't work because Apache is going to catch all /cgi-bin/ requests and serve them from /Library/WebServer/CGI-Executables, never getting to the cgi-bin directory within each site's documentroot.
To set site-specific CGI directories you need to add a ScriptAlias command to each site's .conf, such as:
ScriptAlias /cgi-bin/ /path/to/site/cgi-bin/
This tells apache that any request for /cgi-bin/* should be served from /path/to/site/cgi-bin
Ideally the path should be outside of the site's normal document root, but it can be inside if you really want.

What does virtual host and port mean in a system in ESB console

Hi !
When you click on a system in ESB console you can see and change 'cluster name' , 'Virtual host' and 'Port' .
What does this mean ?
As default the port is 8888 even though the installation uses port 80.
If I change the port, I see no difference.
Could someone please explain ?

It is used to generate the endpoint urls in the wsdl's for the services you have deployed. It needs to be set to the esb server and port number where the services are installed. So if your esb installation uses port 80 you need to change 8888 to 80. Try the wsdl and look at the url of the endpoint.
Kind Regards,
Andre

Some of my photos in iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

Some of my photos in Iphoto turn blank (white) when I tried to edit the size like zoon in and out.Can someone help me on this?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Maximim Number of process and session can set in oracle 10g

my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g database

mithun wrote:
my os is 32 bit windows and ram size is 10gb and i am using AWE_WINDOW_MEMORY setting and now my sga is 6 gb.what would be Maximim Number of process and session can set in oracle 10g databaseThe maximum number of sessions is controlled by your database's SESSIONS parameter. This value is most derived from the PROCESSES parameter. You cannot exceed this number of sessions unless you raise the parameter value.
If your database is configured to handle enough sessions, then Oracle can literally handle thousands of simultaneous connections, provided your database server also has enough resources to handle this number of connections. You will want to implement Oracle's Shared Server connections so that multiple connections share a pool of processes on the database server. This minimizes the resource consumption used by the connections.
Read the following document as well.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm
Thanks

Help please- everytime i update my playlist on my ipod and then i connect my ipod to my itunes the update gets removed and my previous playlist remains. Can someone help me please

HI was wondering if anyone can help me. everytime i update/amend my playlist via my ipod touch 4G and then connect it to my laptop/itunes my playlist reverts back to how it was prior to me updating it. Can someone help me please?

Contact Mercedes if you want to use the dock connector for the the input to the car system. Does Mercedes say it is compatible with your model iPod and its iOS version?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
You can get a cable that goes from the headphone jack and an AUX in on the car system if the car system has such an input.

Virtual hosts and mod_oc4j. Can someone from Oracle please answer, at least reply.

Similar Messages

Maybe you are looking for