Virtual hosts work only after I will restart a httpd

This is strange. I'm using Apache server, and have problem with virtual hosts. For example I have a host:
<VirtualHost myhost.localhost:80>
ServerAdmin [email protected]
DocumentRoot "/srv/http/projects/2014/myhost.pl/public_html"
ServerName myhost.localhost
ServerAlias www.myhost.localhost
ErrorLog "/var/log/httpd/myhost.localhost-error_log"
CustomLog "/var/log/httpd/myhost.localhost-access_log" common
<Directory "/srv/http/projects/2014/myhost.pl/public_html">
AllowOverride All
Options Indexes FollowSymLinks
Require all granted
</Directory>
</VirtualHost>
I also added a
127.0.0.1 myhost.localhost
line to /etc/hosts file.
Now when I restart my computer myhost.localhost will show me default "It works!" message, and just after "sudo systemctl restart httpd" the proper website will appear under this address. Why is that?

Not sure what your actual hostname is; but this is probably related to DNS not being available at boot. Depending on your actual name; apache might listen on the wrong interface / source-address for this domain; which is only fixed by restarting it when you have a working dns-server.

Similar Messages

Net works only after running "dhcpcd eth0" : Kernel 2.6.27

Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
Last edited by Poisonblack (2008-10-16 17:32:54)

Poisonblack wrote:
Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
I don't know if this will help or not, but I was having a problem with the "-R" argument and my dhcpcd.
I used to have my dnsmasq and OpenDNS using this guide: http://wiki.archlinux.org/index.php/Pos … ure_dhcpcd
I had to remove the "-R" to get my internet to work after the last update.... it's still not fixed but at least my Internet works when I start.

Captivate 8 - Next Button Works Only After Viewing Slide

How do I make a Continue button work only after the viewer has viewed the entire slide?
I also want the viewer to be able to skip ahead instantly through slides they have already viewed.
Thanks.
- Jason

Let me show you what I'm trying to create here. Sorry I need specific instructions since I'm a newbie to Captivate and not familiar with conditions and advanced actions.
I am currently using normal buttons (not a shape button) to create my PREVIOUS & NEXT buttons. Based on your advice I will switch to shape buttons.
"It could be done with a conditional advanced/shared action on Enter of each slide. You'll need a user variable per slide, a Boolean, that you change on the first visit from a default value of 0 to 1, after having checked its value."
What specifically do I select for the "On Enter" of each slide?
And do I only need to put this condition in the "On Enter" section of each slide? Or do I also need to setup special conditions for the NEXT button?
Thanks.
- Jason Boone

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Do OS-X style Virtual Hosts work in 10.5.5?

The tips for setting up virtual hosting I've seen in these discussions suggest that OS X Virtual Hosting wasn't working before. Is it now or do I need to edit things with Terminal?

pterobyte wrote:
The instructions in the PDF you refer to do not say that you will get separate mailboxes, just how to associate multiple e-mail addresses with one account (=1 mailbox).
From the PDF: "For example, if your domain is example.com and the virtual host domain is server.com, and you want mail addressed to [email protected] to be delivered to user bob, open bob’s user record in Workgroup Manager," and "This causes mail sent to your mail server for [email protected] to be actually sent to the real mail account for user bob. "
This clearly states mail for [email protected] will go to user bob and not to a seperate mailbox.
The very last line of that section (which you didn't quote) says "Meanwhile, mail to [email protected] will go to another designated mail account."
I took that to mean that if [email protected] was also a short name under bob, then those two address = two mail boxes (so as each domain was under Virtual Hosts and not under aliases).
Re-reading it now, I'd say that sentence is rather ambiguous. I can see how it could support what you say, but also how it leads me to believe what I did.
Do you actually need separate mailboxes at all?
Yep. It's only for a few people. Consultants who work under various domains, and need/want segregated mail boxes.
I'm moving these accounts from a Communigate server where separate mailboxes are already the experence these people are accustomed to.
At any rate, multiple users it is, and the 10-user revelation is also a a big help to know that creating multiple users is not an issue.
It's a shame the GUI doesn't have Long Name and then a Domain field (which would then be used in User lists) -- kinda lame to have to write the Long Name with extra stuff to tell them apart. (without memorizing the IDs). I suppose I could manually assign ID ranges to imply my own arbitrary groupings. 1200+ = domain x, 1500+ = domain y ? Not very explicit though.
Thanks for the discussion.
-- gw

[SOLVED] I can't get virtual hosts working. What's wrong?

What I've decided to do is try to set up each domain name in the user folder to whom it belongs (for example: /home/username/somedomain.com/htdocs). I can't get it to work though. I keep getting an error saying that there's no index file (although there is) or that the location isn't readable (although it is). I'm trying to make it so that if the domain name matches with a virtual host section in httpd-vhosts.conf that a specific DocumentRoot will be loaded for that domain, etc. But, if the domain name points to my server but doesn't match, then I want the default location to work. I can't seem to make this work.
This is my http.conf:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#CUSTOM
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
User http
Group http
</IfModule>
</IfModule>
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/srv/http/default/htdocs">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
<IfModule dir_module>
DirectoryIndex index.php,index.html
</IfModule>
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
#Scriptsock /var/run/httpd/cgisock
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
#CUSTOM
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And here's my httpd-vhosts.conf:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName 45.117.5.40
ServerAdmin [email protected]
DocumentRoot "/srv/http/default/htdocs"
ErrorLog "/srv/http/default/log/error_log"
CustomLog "/srv/http/default/log/access_log" common
</VirtualHost>
<VirtualHost *:80>
ServerName somedomain.com
ServerName www.somedomain.com
ServerAdmin [email protected]
DocumentRoot "/home/normaluser/somedomain.com/htdocs"
ErrorLog "/home/normaluser/somedomain.com/log/error_log"
CustomLog "/home/normaluser/somedomain.com/log/access_log" common
</VirtualHost>
So, for example, I want it to be so that if I visit http://45.117.5.40 that it'll show the stuff ftom /srv/http/default/htdocs but if the domain name matches somedomain.com then I want the server to show the content from /home/normaluser/somedomain.com/htdocs.
What currently happens is that if I visit http://45.117.5.40 or somedomain.com, they both show the same content from /srv/http/default/htdocs.
If I comment out the first VirtualHost section, then everything stops working and I see the default "Access forbidden!" message.
What am I doing wrong?
Last edited by trusktr (2012-04-13 06:15:41)

I fixed it. In case any newbs come across this, I had to add a new <Directory> section for the DocumentRoot of the virtual host. Simply adding the VirtualHost entry in the vhosts file isn't enough.
For example, for the "somedomain.com" vhost in the example above to work, I added this to http.conf:
#This must match with the same location as DocumentRoot in httpd-vhost.conf.
<Directory "/home/normaluser/somedomain.com/htdocs">
#Put whatever directives you want in here
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Let me know if you need any clarification.
Last edited by trusktr (2012-04-13 06:16:02)

Does Apache Virtual Hosting work with localhost?

I'm a newbie trying to learn how apache web server works. I've activated apache web server on my Mac PowerBook G4, and tweaked the config file to get PHP, SSI and CGI working.
If I type the url http://127.0.0.1/ I get the same page as http://localhost/
If localhost is the domain name for the address 127.0.0.1, can I assign other domain names to 127.0.0.1 using apache's virtual hosting?
Ti Powerbook G4 Mac OS X (10.4.4)

localhost is defined as 127.0.0.1. You can use them interchangeably.
As for virtual hosts, sure. Apache doesn't care.
There are two ways of running virtual hosts.
Port-based virtual hosts use a port number other than the standard 80. They can be accessed via something like http://localhost:8000/
Name-based virtual hosts look at the hostname header in the request to work out which site to serve. You can run any number of sites on the same port number this way, but you need to be able to control DNS so that it points to your machine.
If you are just testing this locally you can edit /etc/hosts to add whatever hostnames you like;
127.0.0.1 localhost my.testsite.com me.mydomain.com
Now when you enter 'my.testsite.com' or 'my.mydomain.com' in your web browser, /etc/hosts will resolve this to 127.0.0.1 and you'll talk to your local apache server.
Note that the localhost entries don't have to be in your domain. You can use this to override any real hostname you like.
Of course, if you want remote users to access this site you'll need to setup something in the DNS, or edit their /etc/hosts files individually.

Problem with DNS and/or Virtual Host (works from inside, not from outside)

I am running several web sites (as virtual hosts) successfully on one Xserve (192.168.200), which are accessible internally and from the Internet (via forwarding port 80 on our firewall).
Now I am trying to add another web site (newmini.domain.com), which however is running on a Mac mini (also on the same subnet as the Xserve) at 192.168.100. What I did is make an additional entry under the Xserve's DNS for the domain (domain.com) (+ Machine..., pointing to 192.168.0.100). (I also made the necessary changes to the Mac mini's httpd and hosts configuration--no problem there).
Now, here's the strange thing: All computers on the subnet, whose DNS points to the Xserve, can see and browse newmini.domain.com fine. No problem. The computers ask the Xserve for the IP of the host in question, the Xserve says, "192.168.100", the request goes to the Mac mini, and it serves the web site as expected.
But this doesn't happen if the request comes from the Internet. Instead of seeing the Mac mini, the client sees the default web site of the Xserve... So it appears that somewhere, the virtual host part of the HTTP request is lost between our firewall and the Xserve.
Any ideas? Thanks.

It's not going to.
You say you've setup port forwarding on the firewall. Port forwarding only cares about the port number (80). It knows nothing about the nature of the request (e.g. the hostname that the web request is for). Therefore all extenal connections on port 80 get sent to the XServe. The newmini doesn't see the traffic at all.
If you only have a single public IP address you can only forward port 80 traffic to a single machine. Your options are to either use a different port number, or configure the XServe to proxy the connection to the mini (so now the traffic goes router -> XServe -> Mini -> XServe -> router), although that might not do what you want since it still places load and dependencies on the XServe.

Toshiba Virtual Store works perfectly after update!

Hi
after using my journey, I realized that I have not made ??the right choice.
But when I saw your discussions, I told myself that I have nothing to lose if I do an update.
I followed the instructions to the letter and " MIRACL" Toshiba virtual store works perfectly.
I download all the applications without any problems.
But Youtube stil not working!
c'est dommage

As far as I know the YouTube changed its software architecture and therefore this app is not working.
But thanks for the commend regarding the virtual store update

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

DIMM works only after shut-down and restart

I put a 1GB DIMM (DDR SDRAM PC2100U-25330) in my iBook G4 1.42 GHz about a year ago. It works, according to the Activity Monitor and its often in use when I'm working in Photoshop. But when I install new software and restart, the computer doesn't detect it. I have to shut down and start up again to make it work. I've tried reinstalling the DIMM but no dice. Anyone with a similar experience? Thoughts on how to fix it?
Nick

Quit Mail.
Select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library/Mail
Restore the folder that opens from a backup made before the problem started. Relaunch Mail and test.

Exporting jpgs worked only after restart

Hi!
What I did:
- Exported some RAWs to JPGs with constrained size. Worked as expected. (Don't know wheter this has something to do with the following:)
- Exported some RAWs to JPGs with full size. The JPGs appeared just for 0.5 seconds in the export folder, den disappeared. After the export, LR said "Error during export. Ignore/Show". No hint what went wrong.
- When I then exported the same RAWs with constrained size 1000x1000, it worked! When changing the size to 1500x1500 or more, I got the same error message again.
- Then I closed LR and started it again. Interesting: I had the same collection of error-RAWs again ;-) Then I tried the full size export again, and it worked.
Strange bug.
Bye . . . Joerg

Hi!
Sorry: Notebook HP Compaq nc9420; Intel Core Duo 1,8 GHz, 1,5 GByte Mem, HDD 80 GB, Windows XP Pro, ATI X1600 with 1680x1050 TFT, LR 1.0 installed after deinstalling Beta 4.1; library moved several times.
Exporting sRGB, no watermark, full metadata (did not try other options here)
Bye . . . Joerg

Photoshop won't open or create new documents, works breifly after full windows restart.

Hi everyone,
I am having an issues with photoshop becoming unresponsive. After about 10 minutes Photoshop will not open or create a document.
I've spent hours trying to fix this with no results. I've spent time on Nvidia's forums and tried downgrading the driver back to 275.33 with the same results. I've disabled opengl in photoshop with the same results. This error occurs on both CS5 and CS6 versions of photoshop. I've tried reinstalling photoshop (not removing and reinstalling, just reinstalling).
I can't tell if it's a photoshop issue or a Nvidia issue. I've read countless threads on this forum and can't find any help. Please help.
I've made this video to show you the issues. Thank you for your help
Video of issue - http://screencast.com/t/kG1YgmQ7
Windows 7 x64
Nvidia GTX 275 v296.10
12gb DD3 Ram
Adobe Photoshop CS5/CS6

Hi,
I'm having the same trouble as OP: Photoshop opens but will not create a new document or open an existing one. In addition to that, I've noticed that if you hammer on ctrl+n enough times and manage to actually get a document open, PS won't save it but will go through the motions of doing so.
There have been quite a few reports of this issue now over the last year or so and they seem specific to PS CS5 and up. They all remain unresolved. This is actually an easily searchable issue now.
http://forums.adobe.com/message/3986474
http://forums.adobe.com/thread/911210
http://forums.adobe.com/thread/912268
http://forums.adobe.com/thread/915994
I'm currently working on a big project across the suite and all the other Adobe applications are running fine.
I have tried all the suggested fixes with no result. One other issue that did become apparent, was re-installing PS. After uninstallation, the Adobe installer kept encountering "Exit Code 7" when trying to reinstall PS. The only way around this in the end seemed to be removing all Adobe software from the system and starting again. The original issue remains.
Finally, it's worth mentioning that PS CS5 has worked without any problems on this system for just under a year now. I haven't made any drastic changes to the system so I'm completely baffled as to why this is happening.
Hope this post goes some way to the issue being acknowledged and rectified.
-Windows 7 64 bit
-NVIDIA GeForce GTX 550 Ti
-16 GB RAM
-100 GB + Remaining Disk Space

Ctrl-# space switching stops working, only comes back with restart

Ctrl-# (used to switch spaces) will randomly stop working for me in Mavericks. Turning it off and back on in the control panel does not bring it back, only restarting will. Any ideas why this might be?

Ctrl-# (used to switch spaces) will randomly stop working for me in Mavericks. Turning it off and back on in the control panel does not bring it back, only restarting will. Any ideas why this might be?

Ipod works only after keeping it near the car airconditioning vents

I have an unique problem. I stay in the middle east and have left behind my ipod in the car a number of times. My 2 year IPod is showingm a unique problem. It refuses to send anything to the earplugs/car speakers for the first 5 minutes or so. However it operates smoothly (meaning on screen everything is fine).
Only when I keep the ipod on the air conditioning vents for a couple of minutes, the ipod starts working after making a few screeching noises..
Pls help.

EDEEPAK wrote:
The ipod was working fine for two years , so it should not be the temperature problem.
I disagree. Electronic components can be damaged by excessive heat, and since the temperature inside a car here in the UK on a mild spring day can be as high as 35° C, I would imagine that in the middle east, it would not take long for the heat build up to be well above the 45° C maximum specified by Apple.
Typically, when electronics get very hot, the metal components can expand and if the temperature goes above the design limits this can force the soldered connections of two different parts to separate, thereby causing all or part of the unit to stop functioning correctly. (I still have a first generation CD player that does this due to the amount of heat it generates internally. I've repaired it three times!) If a connection breaks, there is a theory that "freezing" the iPod (or rather - cooling it down) will cause the metal to contract and thereby make proper contact again, thus allowing the iPod to work. This is not a "fix" and may not work at all.
But what I've mentioned above applies to larger devices with parts you can see. The iPod has very small components and circuits that are too small to see with the naked eye, possibly making it even more prone to temperature damage.
Consider this; some manufacturers "test-bake" their products in special ovens so that they can prematurely age them in order to test how long they will last in real life. So the fact that your iPod worked without trouble for two years in excess temperatures does not mean that it will continue to do so.
Sorry to say that it sounds like your iPod is displaying the typical symptoms of a heat damaged electronic device.

Virtual hosts work only after I will restart a httpd

Similar Messages

Maybe you are looking for