Virtual IE or IE closes on opening

I've been trying to virtualise both IE8 and IE9 using the ZAV 10 template.
The virtual app works fine on my build machine but other machines with later
versions of IE it appears to start and closes immediately.
I found this TID: https://www.novell.com/support/kb/doc.php?id=7015068
The TID mentions an issue with App Sense and to build my virtual app in a
way that windows "thinks' is running from a different location than the
standard program files folder.
The TID doesn't however, mention how I might do this. I guess I am a bit
thick.
I've tried changing the launch path before I publish the app but that
results in file not found when I try to run it.
So I guess I am asking how I build my IE virtual app in accordance with the
recommendation in the TID so that windows doesn't believe it is running from
c:\program files etc
Or how has anyone else managed to virtualise IE8 or 9 and be able to run on
machines with IE 10 or 11 already in place.
Thomas

Hi Thomas,
I just gave this a shot and it worked ok for me building IE 8 with ZAV 10.1 running in an unpatched Windows XP SP3 VM. Client test PC was fully patched Windows 7 x64 with IE 11 installed. What are you using for your virtualization environment? I always highly recommend doing everything in a virtual machine, snapshots are your friend. I also virtualize all my apps with the least common denominator for the OS you will be using on the clients. So, for instance, if you know you're running Windows 7 SP1 32bit as your base OS use that for virtualizing in ZAV. Check event logs and make sure your AV software isn't killing it although it would usually come up with some sort of virus warning first. Have you tried building a debug version of your app?
Dave

Similar Messages

Mail applications is blank when I open it, then it closes and opens again by itself, keeping blank

In my Ipad, when I open Mail application it is blank. It stays like this for a few seconds, then it closes and open again by itself. Keeping all time blank.

Have you tried to force quit the app. Double tap the home button. Scroll sideways if needed to bring the mail app preview up on the screen. Flick that preview up and off the screen to close the app. Tap on the home page preview to exit the mode. Then try your mail again.
Other things people have needed to do, especially after an update is to go into the settings, mail contacts and calendars, delete their mail account (it only deletes it off the iPad not out of existence) then exit out, go back i and re-enter the info.

Reg.Automatic posting period close and open

Dear Experts
We have to do Posting period close and open in MMPV every month, is there any way to do automatically as background job. Pls help me.
Thanks in advance
Rajakumar.K

Hi,
To open the MM period every month, you can schedule the batch job in background.
Use transaction code SM36 and the program name for this transaction code is RMMMPERI.
Use dynamic selection for the date, where u can give the date as a first day of next month and schedule the job for the last day of every month.
It is working fine in my system
I hope it will help.

How can I close all open subVI front panels, without closing my top level VI front panel when all VIs are built into executables?

I'm using the code shown in the sample VI discussed here: http://digital.ni.com/public.nsf/allkb/353A696A3F393D9B86256E8B007A2912
to close all open VIs except my top level VI. My top level VI is actually a separate executable and the sub-VIs are their own executables. All reside under the same project. It works very well if I'm running in LabView but will not work when I build them. I added all the sub-VIs to the Always Include box in my top level VIs properties which did nothing. I also tried adding them to the Startup VIs box. This allowed me to close them all programmatically from the top level VI but it also open all the VIs at once (which was expected and not desired). I think the problem is the executables are not able to see outside their own memory space so the top-level VI never finds any other open front panels to close. Is this correct? Is there another way to go about doing this?
Thanks!

Where do I begin…..
I’m using a “server” to control 4 “client” PCs. My server opens references to 4 VIs on each client then executes them sequentially. So on a normal day, the server will run everything itself and I will have no contact with the clients. But on a several occasions, I’ve needed the ability to walk up to one of the clients and run just one of the 4 VIs.
We are updating from LabView 6.1 to 8.5 and we want to run executables rather than VIs for various reasons. I have a new VI running on the client PCs who’s only function is to initialize the shared variables and open/close the VIs. I initially thought of making the remaining 4 VIs sub-VIs but I will loose the ability to run them individually. I think I would also have to rewrite the VI running on the server since the 4 references it originally opened do not exist. I don’t think you can open a reference to a sub-VI on another PC. Can you???
As you can see, this is a huge mess. I’m still pretty new with LabView so any help you can provide would be great.

My ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts

How do I close an open DNS Server

I have received an email from my internet provider stating I have an open DNS Server and my network has been used to attack other networks (DOS) Denial of service. I can't figure out how to secure my network. or close the open DNS server.

You should at least update your Mac to 10.6.8 although I am not sure there are any particular security issues that would be there.
Of course running later OS is always better.. as the latest security updates are implemented in the most recent OS.. but I am not sure one follows the other as some weaknesses are introduced as well in later OS. Any security updates should certainly be installed.
The main point is what modem and what router do you have?
There are a number of these notices being sent to users with apple routers which are hard to believe can be involved. It is more likely the ISP equipment. But we cannot really help you with exact details of your network .. or any more precise details the ISP has given you.
Ring up and talk to their technical help dept. and ask for their help. Even if they won't help you fix apple router.. put the modem in router mode or buy a new modem with router mode and change the apple router to bridge.. then the issue is not caused by you and the ISP can remotely adjust their own box.

Firefox will hang on a website then everything else will no longer load and forces me to close and open firefox to get it to work.

As the question says I am having several issues with Firefox lately. I've tried disabling every addon, disabling JavaScript, running it in safe mode - no addons. Nothing seems to work.
I'll be on pandora listening to music, I open a new tab and go to a site like facebook. If that page does not load or hangs, my browser will no longer allow me to go to any other site until I close and open the browser. (Of course closing the tab that caused the issue). This happens about 10+ times every day, and I've supported firefox for years but this issue just keeps getting worse. It started when I upgraded to FireFox 6.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
What version of flash player do you have installed? http://www.adobe.com/software/flash/about/

Looking for PS Script to Save and Close All Open Documents

I used ACR and CS5 to process my Nikon D3 NEF files. I would like a script that would save all open documents (witin PS) with the highest possible quality (12). I've found several scripts that will close all open documents with save but cannot figure out how to implement a save script.
For example, I may have 20 converted .jpeg files open. I would like to run a script to save & close all open documents.
Is it possible? Can someone post an example working script?

Take a look at the image processor, under the scripts menu.
MTSTUNER

Howto close all open windows?

Hi,
I am developing some kind of library, and I would like to close all open windows, dialogs, tooltips in the error case.
The problem is I don't have control about the windows currently open, many are instantiated by plug-ins.
Is there a way to get a list of all windows? This way I could go throw the list and simply call dispose() on all.
Thank you in advance, Clemens

One possible approach could be trying to track AWT event. I would try to get notified as each Component is added and maintained in a hashtable.
getToolkit().addAWTEventListener (aWTEventListener, AWTEvent.COMPONENT_EVENT_MASK | AWTEvent.CONTAINER_EVENT_MASK);
AWTEventListener aWTEventListener = new AWTEventListener()
public void eventDispatched (AWTEvent Event)
// find the component from event source and record it.
};

Close all open windows at same time

Is there any way to close all open programs at once, rather than having to do them one at a time?

I don't know of a way to close all open apps at the same time, but i do know of a way to close all open windows in a particular app at one time, ie: safari
Hold down Option when you click on the red close button at the top of one of those windows, and it will close all windows *for that app*...but doing so doesn't necessarily quit the app.
The only other thing i can think of you can do is hold down Command, Option, and Esc to get the Force Quit window to open, (or access it from the Apple menu at the top left corner) and then you can select one at a time all the apps and force quit them individually...it's still quicker than switching between each app individually..
Message was edited by: tool
Message was edited by: tool

Close all open windows

Is there any way to close all open windows at once? I cannot find any way to do so. Any keyboard shortcut?

Thanks, Tom.
Your response led me to the answer I was looking for. However, I found it worked better to press command and option , then click the red close button on the top line of the top window. This closed all open windows within the application of the open window. I had to do the same thing for each application. In my test case, I opened about 10 word processor windows and 10 email windows, all at the same time. I had to do the command-option - click red button twice, once for my email application, and once for the word processor application. It took me about 2 seconds to close all of the open windows.
Thanks a lot for your instructions.

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

I keep getting an error window about java since I updated to firefox 8, my tabs will flash, tabs will close and open in a new window, everything stops working, firefox is non responsive, please help

Since I upgraded to firefox 8, I get this error window that pops up says something about java. My tabs flicker or flash, the tabs will close and open in a new window then everything stops. Then firefox does not respond. When I get this error message, I have to close all tabs wait a few seconds then open it back up it will work for a little while and then do the same thing. I have disabled plug-ins that I do not use, I have cleared my cache and cookies, I am not happy at all with this new version. I waited a while before updating. The first time I was going to update, firefox would not let me keep my anti-virus plug-in. PLEASE HELP

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Virtual IE or IE closes on opening

Similar Messages

Maybe you are looking for