Virtual Key Figures using RSR_OLAP_BADI

Hi gurus,
We have been using the RSR_OLAP_BADI to generate some virtual key figures for our queries, now we have a problem creating a virtual key figure...
We have got 4 key figures in the query, 1 is a normal KF and the last 3 are virtuals, one of the virtuals uses the normal KF and splits it between the total of the same KF. The point here is that the calculations are not coming ok because the COMPUTE method does not bring the information summarized as the KF is defined, because in the same structure of the query ther are some formulas that have the same KF restricted to another level of information.
If we remove from the query this formulas, the virtual KF works perfect because the normal KF is delivering the information summarized.
The question is... is it normal that this happened or there may be something wrong in our definition?
Thanks and best regards to all!!!

Hi,
You can get number of threads in SDN search.
Check in the following blog
IF_EX_RSR_OLAP_BADI~DEFINE
https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6776739
https://forums.sdn.sap.com/click.jspa?searchID=23657256&messageID=6788064
http://sapbikk.blogspot.com/2008/05/writing-virtual-characteristics-or-key.html
Thanks
Reddy
Edited by: Surendra Reddy on Mar 18, 2009 4:29 AM

Similar Messages

Issue with Virtual Key Figures Using BADI

Hi,
We are populating values for a few virtual key figures in a query over a multiprovider through a BADI implementation(RSR_OLAP_BADI). On execution the VKF fields appear blank in the report.
We tried debugging the methods of BADI by adding Break-Points in specific points. On doing so, we found that the values are properly updated in the 'Field-Symbols' used in the Compute method, but the same values do not appear in the report result and the fields are blank.
Kindly provide any pointers or suggestions.
Thanks.

First check in Technical Information in RSRT , whether the
Virtual Char/Key Fig is Y or N.

Virtual Key Figures in RSR_OLAP_BADI COMPUTE Method not recalculated

Hi,
Please clarify why is the COMPUTE METHOD of RSR_OLAP_BADI not always
triggered or executed.
For instance, my query is drilled down by customer and
material by default. Upon opening the query and after entering
the appropriate selections, the virtual key figures that I have
used in the query are correct .
However, if i make any change to the query and run it in RSRT, the BADi method COMPUTE is not executed.
Is this really the normal behavior of the said BADI? Why is
it unstable?

Hi Rohit,
I have a similar problem the compute method is not trigerring and i am trying to debug it but it is not breaking at all, although when i generate from rsrt it breaks at a breakpoint of define method however i have defined another break at compute method but not breaking.
I am using the infoobject inside the query but and tried to hard code it for testing in the compute method but doesnt seem to be getting executed.
Please help.
Cheers,
Jad

Virtual Key Figures in RSR_OLAP_BADI not re-calculated correctly

Hello BW/BI Experts!
    Please clarify why is the COMPUTE METHOD of RSR_OLAP_BADI not triggered or executed
if you remove a drilldown to a certain characteristic.
    For instance, my query is drilled down by customer and material by default. Upon
opening the query and after entering the appropriate selections, the virtual key figures
that I have used in the query are correct .
    However, if you remove the drilldown by customer(for example), the virtual key figure
is not re-computed. I was able to verify this by setting break-point in the COMPUTE
method. However, if you drilldown by customer again, the re-calculation for the virtual
key figure is correct likewise, if you refresh query, the results will be correct.
     Is this really the normal behavior of the said BADI? Why is it unstable? If I will
use RSR00002(the user exit version), will I not have the same issue?
Thanks in Advance!

If I will use RSR00002(the user exit version), will I not have the same issue?
I dont see any reason why this wouldnt behave the same way.
I assume from ur post that you need to read ur customer and material to derive ur virtual KF in the BAdi. When you remove the drilldown the customer value is no more available for the exit to calculate the KF, thats when it throws out a wrong number. I havent seen a work around for this. Please update the form if you find a solution to get the customer values into the exit even after removing the drill down.

Virtual Key Figure on Multicube (RSR_OLAP_BADI)

I've created a virtual key figure (using RSR_OLAP_BADI) for number of days in month [zdays_month]. Everything works perfectly when it's used in a query on a cube cube. BUT, when I try to use it in aquery on a multi-cube, it doesn't. The multi-cube query returns a number = the number of days in the month * the number transactions in that month.
Anyone know how I can force the VKF to execute after the data is returned? I would prefer to not mess with exception aggregation, or key figure properties. I need to keep this VERY SIMPLE for my query developers.
Your assistance is greatly appreciated,
Kenneth

hi,
first try to check whether the query access virtual kf or not, use transaction rsrt, type in the query name, and click technical info or properties, there will some line 'virtual char/kf'.
i think the query may never access the code in BadI because in the code it's set with condition infoprovider technical name, it will cover only the infoprovider, when we access query from multiprovider, which join from one of the infoprovider, it's not automatically have the virtual kf/char, we have to specified the multiprovider name in the BadI, you may change the code as following :
hope this helps.
CASE i_s_rkb1d-infocube.
    WHEN '[your infocube name]'.
ENDCASE.
to
IF i_s_rkb1d-infocube = [your infocube name] or
   i_s_rkb1d-infocube = [your multiprovider name].
ENDIF.
for other infoproviders
CASE i_s_rkb1d-infocube.
    WHEN '[other cube name]'
ENDCASE.

Virtual Key Figure ( Currency Problem)

Hi All,
I am facing one problem in virtual key figure using BADI. Need your help...
Scenario: I have a DSO with all many fields. Requirement is to add one more VKF in DSO to get specific period balance of a GL from 0FIGL_O10 DSO and then display it as a column in Bex report. Added VKF is of type amount and unit/currency 0CURRENCY.
Required Report Format:
Material --- Col1 u2013 Col2 u2013 Col3(VKF)
M1--$4, 00-$140, 00u2014<Balance form 0FIGL_O10 for a period>
Work done so far:
I have added a virtual key figure ZVKF_BAL in my ZSD_O06 of type amount unit/currency as 0CURRENCY. In RSR_OLAP_BADI I have added a new implementation ZVAR_IMPL.
In class ZCL_IM_VAR_IMPL there are total three attributes.
P_KYF_ZVKF_GL u2013 Virtual key figure
P_CHA_0FISCPER u2013 Period is from ZSD_O06 for which we have to get the balance of a fixed GL account from 0FIGL_O10.
Given is the code added in define method:
DATA: l_s_chanm TYPE rrke_s_chanm,
 l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
 <l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZSD_O06'.
 l_s_chanm-chanm = '0FISCPER'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
 APPEND 'ZVKF_GL' TO c_t_kyfnm.
ENDCASE.
No code added in initialize method
Given is the code added in compute method:
FIELD-SYMBOLS <fs_ZVKF_GL> TYPE ANY.
FIELD-SYMBOLS <fs_0FISCPER> TYPE ANY.
DATA :LV_FS_ZVKF_GL TYPE /BI0/OIBALANCE,
p_cha_0FISCPER = 8. "ASSINGING POSITIONS TO THE FIELD AS THEY ARE NOT GETTING IT
p_kyf_ZVKF_GL = 16.
ASSIGN COMPONENT p_kyf_ZVKF_GL OF STRUCTURE c_s_data
 TO <fs_ZVKF_GL> .
ASSIGN COMPONENT p_cha_0FISCPER OF STRUCTURE c_s_data
 TO <fs_0FISCPER>.
Customized function module which will calculate the GL Balance.
CALL FUNCTION 'ZGLBALANCE'
 EXPORTING
 FISCPER_I = <fs_0FISCPER>
 GL_ACCOUNT_I = '0000476000'
 IMPORTING
 BALANCE_O = LV_FS_ZVKF_GL.
<fs_ZVKF_GL> = LV_FS_ZVKF_GL.
Code of ZGLBALANCE:
DATA: lv0_fiscal type /BI0/OIFISCPER.
DATA : X TYPE I VALUE 0,
types: BEGIN OF ty_/BI0/AFIGL_O1000,
 FISCPER type /BI0/OIFISCPER,
 GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
 BALANCE type /BI0/OIBALANCE,
 CURRENCY TYPE /BI0/OICURRENCY,
 END OF ty_/BI0/AFIGL_O1000.
data: it_/BI0/AFIGL_O1000 type TABLE OF ty_/BI0/AFIGL_O1000, " Internal table
 wa_/BI0/AFIGL_O1000 type ty_/BI0/AFIGL_O1000. " Work area
select single FISCPER GL_ACCOUNT BALANCE CURRENCY from /BI0/AFIGL_O1000 into CORRESPONDING FIELDS OF TABLE it_/BI0/AFIGL_O1000 where GL_ACCOUNT eq GL_ACCOUNT_I and FISCPER eq FISCPER_I and CURRENCY = 'USD'.
BALANCE_O = X .
Problem:
We are getting the balance values but it is coming with numeral with postfix ERROR.
M1--$4, 00-$140, 00u201412,00 ERROR
M2--$24, 00-$130, 00u201414,00 ERROR
Is it something to do with currency? Please let us know what is worng in code?
If yes please let me know how to get the currency along with the numeric values there in the report.
Thanks & Regards,
Mayank

Hello mayankmishra135,
Were you able to find a solution for this? I am facing the same issue (with the ERROR in the currency field), wuold appreciate your help.
Best regards,
Aleksander Dyl

Using Virtual Key Figures/ Characteristics is possible to use in InfoSets

Hi All,
Is it possible Using Virtual Key Figures/ Characteristics is possible to use in InfoSets?
I have tried all the possibilities using the BADI implementation RSR_OLAP_BADI without success.
The VKF / Characteristics works fine when it is being used with a query based on the ODS however it is not populated when i am using the infoset. Moreover i have used the code for InfoSet as well it is not working.
I would appreciate any help in this regard.
Regards
Noor

Hi PV,
r u sure about that, as i have tried all sort of permutation and combinations for using the same in RSR_OLAP_BADI without any luck.
I have the got felling about the same however if you look into the following SAP note it puts me into doubt.
Note 657690 - Virtual characteristics and key figures in InfoSets
Note 618738 - Virtual characteristics or key figures and InfoSets.
It describe about using the RSR00002.
Many thanks for the information.
Kind Regards
Noor

Problems using virtual key figures

Hi experts,
I have got 2 questions regarding virtual key figures, by using the OLAP BADI
1. Is there a chance to get the variable values out of the variable selection screen in the BADI implemtentation? If so, how?.
2. In the compute method the assign does not work because the Attributes (p_kyf_ZIMCREDAY, p_cha_0material,p_cha_0calday) are 0 all the time.
How does the attribute get a correct assignment to a component name? See my coding of the define and compute method below.
Thanks and Regards, Mario
IF_EX_RSR_OLAP_BADI~DEFINE
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
CASE i_s_rkb1d-infocube.
WHEN 'ZD_IMC001'.
l_s_chanm-chanm = '0MATERIAL'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
l_s_chanm-chanm = '0CALDAY'.
l_s_chanm-mode = rrke_c_mode-read.
APPEND l_s_chanm TO c_t_chanm.
APPEND 'ZIMCREDAY' TO c_t_kyfnm.
ENDCASE.
IF_EX_RSR_OLAP_BADI~COMPUTE
FIELD-SYMBOLS <fs_ZIMCREDAY> TYPE ANY.
FIELD-SYMBOLS <fs_material> TYPE ANY.
FIELD-SYMBOLS : <fs_calday> TYPE ANY.
ASSIGN COMPONENT p_kyf_ZIMCREDAY OF STRUCTURE c_s_data
TO <fs_ZIMCREDAY>.
ASSIGN COMPONENT p_cha_0material OF STRUCTURE c_s_data "p_cha_0material
TO <fs_material>.
ASSIGN COMPONENT p_cha_0calday OF STRUCTURE c_s_data "p_cha_0calday
TO <fs_calday>.

Regarding 1.
I checked in debugging the variable I_TH_SFC in the initialize method, but there is no information regarding the selections in the variable popup.
Can you please explain in detail how to access the variable values.
Regarding 2.
I changed l_s_chanm-mode to rrke_c_mode-no_selection according to your recommendation.
Unfortunately it´s still the same. The attributes still does have the value 0. Therefore the assign does not work correct.
The attributes are defined with type i. But the component names are like 'K____132'. Is this the cause of the problem?
Thanks, Mario

Calculating count of orders using virtual key figures

Hi All,
In my report, i need a counter for the number of distinct orders.
1ROWCOUNT didnt work for me as i want the count of distinct orders alone.
I am planning to use virtual key figure for this..
However, i donno how to code this in ZXRSRU02 and ZXRSRZZZ.
Any help on this would be great!!
Thanks!
- Arun KK

Shana,
I dont understand your question.
I'll give an eg.
this is how the cube is.
Order | Desc | Location
101 |   'X' | loc01
101 |   'X' | loc02
102 |   'Y' | loc01
103 |   'Z' | loc01
102 |   'Y' | loc02
in the report, i need the o/p to be.
Order | Desc | count
101 |   'X' | 1
102 |   'Y' | 1
103 |   'Z' | 1
i cant use 1rowcount as that counts each row and not the service orders.
Hope this answers your question.
Please let me know if there is a solution for this.
Thanks!
~ Arun KK

Using Variable values to populate virtual key figure

Hi Gurus,
I want to populate virtual key figure in my report. I am using BADI for this. To populte VKF I want to use the variable values in my calculation. For eg. variable name is ZCAL_MON based on 0CALMONTH. When the user enters some value in this variable say 03.2010 I want to populate VKF for the last 12 months (sum for a period 04.2008 to 03.2009). I have written a customer exit in CMOD for variables but for vkf I am using BADI. Can anyone tell me how do I pass the variable value in populating vkf and also how do I total for the last 12 months?
Utpal

Hi,
Did you find a solution. I'm just looking for the same thing.
best regards..

Use of Key Date in Virtual Key Figure Calculation

I have a virtual key figure whose value depends in part on the key date entered by the user. I have the VKF set up with a dummy calculation, and it is working OK.
How do I refer to the value of the key date in the code that assigns the VKF value?
Thanks,
DP

Found the answer, thanks to another thread:
Function RRS_VAR_VALUE_FROM_MEMORY_GET with I_VNAM equal to the key date variable returns the value of the key date.
DP

Creating BADI for Virtual Key fig: Error: RSR_OLAP_BADI does not exist

Hi,
I am following some instructions to test the implementation of virtual key figure and came to the point to create the BADI.
Intructions on page 5:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c
SE19
Create Implementation; New BADI; Enhancement Spot: RSR_OLAP_BADI
At this point I get an error that RSR_OLAP_BADI does not exist.
I then chose at random APB_LAUNCHPAD but this works in the sense that it took me to the next screen
1. What does it mean by RSR_OLAP_BADI not existing?
2. I know the instructions points to choose RSR_OLAP_BADI, but why that particular program and how does one gets to know that it is the one to use for virtual key figure/char implementation?
3. When I tested with APB_LAUNCHPAD, I did not get the same screen on page 5 of the link, is it different for BI 7? Or, am I missing a point?
Thanks

Hi,
thanks for the guidance.
Yes, I tried to implement exactly as in the article.
Yes, I defined the filter for the Infoprovider, as ZV*
Are you suggesting that at this point, if in the method if_ex_rsr_olap_badi~define, I change the value of
"ZV_ZIPER" to my DSO or Cube, I should now see the virtual key figure in my query?
Based on this understanding, I modified the method as follows, (my cube name is 2LIS_11_VASCL):
method IF_EX_RSR_OLAP_BADI~DEFINE.
DATA: l_s_chanm TYPE rrke_s_chanm,
l_kyfnm TYPE rsd_kyfnm.
FIELD-SYMBOLS:
<l_s_chanm> TYPE rrke_s_chanm.
Insert Code
CASE i_s_rkb1d-infocube.
CASE i_s_rkb1d-2LIS_11_VASCL.
 WHEN '2LIS_11_VASCL'.
 l_s_chanm-chanm = 'ZVAR_SHPR'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
 l_s_chanm-chanm = 'ZVARDT'.
 l_s_chanm-mode = rrke_c_mode-read.
 APPEND l_s_chanm TO c_t_chanm.
 APPEND 'ZV_20DV' TO c_t_kyfnm.
ENDCASE.
endmethod. "if_ex_rsr_olap_badi~define
After activation, I checked the query and still I am not seeing the virtual key figure in the query for selection.
Any more ideas?
Thanks
Edited by: Amanda Baah on May 24, 2009 8:01 AM

Virtual Key figure not getting populated

Hi All,
I have included a virtual key figure in a multiprovider on which the query is created and its underlying ODS.
This issue is the virtual key figure is not getting populated . I am not sure what I am missing
I did the following :
1) Tried Debugging - Put a break point and execute the query in RSRT.It did not go to the Exit. I also tried generating the query from RSRT.
I am using the BADI (RSR_OLAP_BADI) to populate the Vir Key Fig.
Please guide me.
Thanks,
HM

Hi All,
Now that I am able to get the logic to come up in debug. I am faced with another issue.
I am implementing avery simple logic . I added a integer type key figure to the ODS and I am tryin to assign value 1 to the the key figure in the code (I am assigning 1 just ot check if the value is passed to query or not. I do have acomplex logic tha i need to implement).
Here I am able ot see the value in the debug but in the qury the value is not populated.
N ot sure what might be going wrong.
code is
l_z_avg = 1.
<fs_zavglate> = l_z_avg .
Appreciate help.
Thanks,
HM

Create Badi for Virtual Key Figure

Hi experts,
i have to create badi for virtual key figure in BIW for dat i m creating Badi in BI development but its asking for Access Key.
Badi name is RSR_OLAP_BADI
i want to know while creating classic Badi with Implementation Name do developer need access key or thr any othr way to develop Badi for Virtual Key Figure.
Tell me for creating virtual key figure in biw we use Badi and for dat we have to create the Badi in BIW Dev. or in R/3 Dev.
it first time dat i m creating BAdi.
Ankit
Edited by: ankit375 on Feb 3, 2011 11:14 AM
Edited by: ankit375 on Feb 3, 2011 11:14 AM

To see how to create this BADI see here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90b2babc-15ad-2d10-c4b2-bd3af67d86b1
You you need to be registered as developer (you have to have dev.key) to do the coding.

Virtual Key Figure

Hi all,
Before implementing a virtual key figure, I'd like to make sure this will answer my need. I work for a brewery, and I am looking at our customer taps activity.
Records in the cube:
Trading Region A, Brand X, Customer 001, Action "Install": 1 "Tap action"
Trading Region A, Brand X, Customer 002, Action "Install": 2 "Tap action" (new taps)
Trading Region A, Brand X, Customer 002, Action "Removal": 1 "Tap action" (old tap)
So what I want to have in my report is :
Trading Region A Brand X: 2 "customer activity"
I am thinking I could use a virtual key figure that will look in the cube and check if there was any activity for a customer on that brand and trading region, and then will allow me to aggregate the result in the query.
But I am not sure because it seems to me that Virtual Key Figure are calculated at record level...
Could any of you clarify this for me ?
Many thanks for your help,
Nicolas

Thanks a lot !
I don't know why I tried such a complicated solution...
Tried to assign points and close the issue, let me know if it didn't work as this is my first post...

Virtual Key Figures using RSR_OLAP_BADI

Similar Messages

Maybe you are looking for