VIRTUAL KEYBOARD NOT SHOWN

anybody who can help me about my problem with torch 9800? my virtual keyboard does not appear.....

Try a battery pull. Remove your battery while your phone is powered on then replace it.
Let us know if that helps.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

New added disk in vm virtual box not shown in solaris

hi,
I have added new disk in VM virtual box to use it for asm, using storage tree in Vm virtual box i have added two new disks but after that when i start my OS (solaris 10) and use format command it only shows my one disk not the added disk which i add in storage. Any idea why the new added disks are not shown .
Thanks
Zeeshan

Navigate to the repository tab in OVMM and right-click on the storage repo, where you created/copied the vm disk image file. From the pop-up menu choose refresh repository.
That should scan you repository and make the new disk visible on OVMM.

N900 virtual keyboard not working

please help
i cant use the virtual keyboard any more
i tried to disable and enable (not working)
i tried to restore setting (not working)
i restore to backup point ( nothing)
please help any ideas.
thank you

have you tried turning off and back on?
You could try this test to make sure the keyboard sensor is working.. the virtual keyboard will only work if the physical keyboard is closed.. if the sensor is broken, it might not know the keyboard is actually closed..
Open this link on your phone
http://chris.intrepid.cx/N900/fix
Click on the FIRST LINK ONLY.. select open and install the package..
Now open an x terminal and type these two commands
sudo gainroot
cat /proc/kmsg
Now try opening and closing the keyboard.. Make sure it says:
slide (GPIO 71) is now open
when the keyboard is fully opened and says:
slide (GPIO 71) is now closed
just as you start to close the keyboard

E7 virtual keyboard not working

Hi,
I got my E7 yesterday and encountered a problem today. When I try to write an sms or email on the virtual keyboard (phone slide closed in portrait format), the screen is not responsive at all. The screen is responsive when I press the "write message" icon on the homescreen, I can press any icon etc. and the phone works. Only when I open the virtual keyboard, does it stop responding. Only way out of the screen is to press the physical key on the bottom of the phone.
Anyone else encountered this? Could there be some weird setting that prevents me from using the virtual keyboard? The physical keyboard works fine.
Thanks in advance!
Solved!
Go to Solution.

Aha. Good old boot-up seemed to do the trick. Hopefully this won't become a more frequent issue.

Kaspersky virtual keyboard not functioning with Firefox, ok on WE.

Have Add Ons, British Dictionary, Flash & video Download, Flashblock, Java Quickstarter. Could it be one of these? Disable them all maybe to try it?

You can check with Kaspersky support about that, but from what I have seen posted here by other Kaspersku users the virtual keyboard hasn't been updated for Firefox 3.6 by Kaspersky.

Torch 9800 virtual keyboard not displaying

someone please help me
how can i resolve my problem. my torch doesn't show it's virtual keyboard. i've already tried rebooting it but no use.

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Torch Virtual Keyboard not displaying

Hi I wonder if anyone can help me please?
The Virtual Keyboard on my BB Torch won't display any ideas on how I can rectify this? I guess Imust have done something without knowing.
The slide out keybaord works fine, but I can't get the Virtual Keybaord to show in any application.
Any help how to solve the problem would be much appreciated.

Well, I had the same problem, but I've managed to fix it.
First I tried pressing the screen when the phone was closed and it worked so far but it was quite annoying to press it anytime i wanted to rotete my screen or use the virtual keyboard. So I started to make some experiments and found out that the issue can be fixed with a magnet. I found out this when i was playing with the hostler. So the next step was finding a magnet, then I broke it with a hammer an took a small piece of it afterwards i tried to make it as slim as possible with some sand paper, then I opened the phone and sticked the magnet with some tape just above the memorycard and voilà!!! now it's fixed... I assume the sensor of the sliding screen stopped working somehow but believe me, try to pass a magnet above the screen and you´ll see how it gets fixed... At least it worket to me, if you want to see my fixed BB tell me I´ll send you a picture...
Regards

Droid x virtual keyboard not functioning

So, after the update to GB I notice that the new keyboard kept force closing and now everytime I press (or touch) the space bar the key board hides......any help??????

I would start with the more benign approach and try the "Clear Cache" approach first...
Wiping cache partition
Power off
Power On Holding Home Key
When Andy with Exlamation Point Shows up Press BOTH Volume keys
Use Volume Keys to navigate to "wipe cache partition" and tap power button to select
Wait for it to finish and select reboot system

Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.

Background of Virtual keyboard in iOS8 for iPad not display properly when pop up in Column mode.
Device:iPad 4
OS:iOS8.0
Repro Steps:
1.Navigate to any page that virtual keyboard will be used.
2.Use your finger slide on virtual keyboard to make it in Column mode.
3. Hide the virtual keyboard in Column mode.
4.Tap on any field to use the keyboard again.
Actually result:
Background of Virtual keyboard not display properly when pop up in Column mode.(It's fine in iOS7)
Please refer to the image:

Are you running the latest Adobe Reader Version i.e. 11.0.1? Can you please share the file where you are encountering this issue to [email protected]?

Not able to use online banking virtual keyboard with ios 4.3 neither 4.3.2. Used to use with ios 4.2

I used to transfer money via ebanking with my ipad 1 ios 4.2. But since i updated to ios 4.3, i'm not able to do so. Then i bought an ipad 2 and still not able. I updated ios to 4.3.2 yesterday and the problem continue. I can open the bank page without any problem. But when i try to transfer money, it ask for a confirmation key and pops-up an virtual keyboard. Well with ios 4.2 i was able go see the virtual keyboard and enter the key, but with ios 4.3 and 4.3.2, not able to see the keyboard. Safari is set to allow popup windows, but still not able to do so. I installed another webrowser, which allow me to see the virtual keyboard, but when i type the key it doesn't do nothing. Does anyone have an idea how can i solvr this issue? Thanks

it's a bit old but you have this information :
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04009&sliceId=SAL_Pub...
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

A word document was emailed to me. I can open the document without a problem. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

A word document was emailed to me. I can open the document without a problem on my iPad 2. Is there a way for me to type on the document.... to fill out the form? When I click the fields, the virtual keyboard does not appear.

If you want to edit a word document then you will need an app on your iPad that supports word so that you can copy them to it via 'open in' e.g. Apple's Pages app or a third-party app such as Documents To Go or QuickOffice HD

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

I shall wait until Kaspersky URL addon and virtual keyboard are available before upgrading. Why not let us see what addons/ extensions are available for each upgrade without having to download each and uninstall again?

I have 3.6. It works fine for me. Kaspersky link filter and virtual keyboard are on the toolbar.
I have upgraded twice now, but each time these and other extensions are not available for the version. So I uninstall and go back to 3.6.
As you are having this spate of upgrades, it would be so much better if we could know what extensions are and are not available before we upgrade.
Why not build the upgrades so that extensions work?

Same problem here too. Curious to see what could be causing this. It has been happening for me for the last two years (South Park). Not too big a deal but it would be great for the auto download to work properly.

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

VIRTUAL KEYBOARD NOT SHOWN

Similar Messages

Maybe you are looking for