Virtual path not accessible on IAS

Hi all,
We have installed an IAS LInux version on a server.We create virtual paths using following command lines in forms90.conf file:
AliasMatch ^/forms90/sigfip/webutil/(..*) "/u01/sigfip/webutil/lib/$1"
AliasMatch ^/forms90/sigfip/jars/(..*) "/u01/sigfip/jars/$1"
Both webutil/lib and jars directories, contains jars file.
When i entered the following url in browser:
http://host:7779/forms90/sigfip/jars/progressbar.jar
an server not found error occured.
What's the problem.Could i make other configurations to define virtuals path with LINUX IAS?
Plz help

Hi all,
My problem is solved.Notice that when u update forms.conf file, http server must restart before updates be available
Thank u!
TYAG

Similar Messages

GL ARB imaging unsupported. Launch path not accessible

Hi,
Previously im running an app which is working fine but all in sudden it won't run but instead it freeze. I was trying to run an application called Mixemergency.
i always ended with the error saying 'Launch Path Not Accessible'.
I did run a Disk Check and the result is GL ARB error which is OpenGL.
Please help.

Ramses de Norre wrote:
Hohoho wrote:
crw-rw-rw- 1 root root 226, 0 2007-07-13 13:54 /dev/dri/card0
How can I change it to video group?
You don't want to do that... You don't want regular users to have raw access to your video device, all hard drives and such have similar permissions for the same reason.
-edit- Whoops, totally misread your post - I've corrected my own now. -edit-
Yes, you definitely don't want regular users raw access - see my xorg.conf modification to fix it.
Last edited by Cerebral (2007-07-13 12:32:54)

What in inkchecker and why is its launch path not accessible?

I've just started getting these error messages in my console every time I use the system print command. (It happens as soon as I click on print and the print dialog box appears - before I make any choices of print/preveiw, etc). It seems to just have started for no reason I can think of. I've been using 10.4.7 on my PPC G4 Mini, thinking of going to 10.9 but worried this might mess up my printing.
I have an HP2710 that has given me very little trouble (other than install over wireless network). I have one "printer" set up for the gimp printer drivers and one for the HP drivers.
I HAVE been able to print, but I'm concerned about the error messages.
2007-05-06 08:32:53.829 Safari[7192] InkChecker could not launch , launch path not accessible
2007-05-06 08:33:53.315 firefox-bin[7198] InkChecker could not launch , launch path not accessible
2007-05-06 08:34:20.130 firefox-bin[7198] InkChecker could not launch , launch path not accessible
2007-05-06 08:35:14.208 Microsoft Excel[7203] InkChecker could not launch , launch path not accessible
2007-05-06 08:45:08.616 TextEdit[7215] InkChecker could not launch , launch path not accessible
2007-05-06 08:46:34.159 Mail[5762] InkChecker could not launch , launch path not accessible
I can find no meaninful references to "inkchecker" anywhere - is it part of apple system software - could this be a corrupted file?
Thanks for any help, comments, suggestions, etc.

I have upgraded to 10.4.9 and this message has gone away. Wasn't able to figure out if it was coming from HP or gimp software.
I've done an "archive and install" which seems to have not carried over my printing setup (need the HP software for the All-in-One to be able to use the Scan, Fax, Memory Module), so I have the printer installed through Bonjour. Who knows -- Maybe it will start again when I get around to re-installing the HP AIO drivers?
I'm going to mark this as answered.

Launch Path not accessible.

I'm not a Pro of all this but it has happen to me on some application's.
Please help..
I can't open some apps.

please can any Apple pro reply..

Not able to install iTunes 10.3.1 in my Win 7 home edition OS, while installing getting "\\APPDATA not accessible" Network path not accessible and installer stops

Hi,
Installation of iTunes 10.3.1 fails in my notebook which has Win 7 home edition OS. Earlier i had iTunes 10.2.1 which was working perfectly, later upgrade installation fails.
need help.

Does no one have an idea?

Quarkxpress 9 crash message: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'launch path not accessible'

Please!... I'm been trying to fix the proble by clearing the preferences of the program... but it doesn't work..... what can I do?... and I'm having the same problem with Indesign

I am also having this problem.
Anybody have any suggestions?

Virtual paths

Hello,
I have installed Oracle Internet Application server and Oracle 8i database. I am trying to run the test.fmx form and get bad request error. I can only assume that I have not set up the virtual paths.
I don't quite understand what file I write these virtual paths to. Any help would be greatly appreciated as I am very new to this software.
Thanks.
Sue

Thanks for your response. All things that you mentioned are correct. The forms server is running and the form test.fmx is in the forms60_path.
I read that you needed to configure the virtual paths in the listener and this is where I am confused.
I am running Oracle IAS 9i and oracle database 8i. The documentation for OAS is slightly different with the webdb listener. I don't think OIAS uses the webdb listener and configures another listener. Am I correct about this?
Thanks for your help, this is very confusing to me and frustrating when I can't get the test.fmx to display in the browser.
Sue

An error The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered after launching a ps1 script from cmd file.

I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.

I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help.

The selected remote nodes 'node3' are not accessible

Hello,
I removed node3 from 2 node RAC Cluster.
After this I have re-add this node to my RAC. I added without any problem to CRS but I have a problem with script addNode.sh (/u01/app/oracle/product/crs/oui/bin).
I have to separate homes for ORACLE_HOME and ASM_HOME, so I need to run this script twice for each ORACLE_HOME.
I run addNode.sh from one of the cluster nodes (node1), if I run:
export ORACLE_HOME=/u01/app/oracle/product/11.1.0/asm
cd $ORACLE_HOME/oui/bin
./addNode.sh -silent CLUSTER_NEW_NODES={node3} CLUSTER_NEW_PRIVATE_NODE_NAMES={node3-priv} CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}
I got the following error:
Performing tests to see whether nodes node2,node3 are available
............................................................SEVERE:The selected remote nodes 'node3' are not accessible.
... 100% Done.
I reviewed logs located in /u01/app/oraInventory/logs I found
Status of node 'node3':
null
The virtual host name 'node3-vip' for node 'node3' is already in use.
I checked crs_stat from $ORA_CRS_HOME, but all applications (ons, gsd, vip) and targets are ONLINE. I tried to run vipca -nodelist node1,node2,node3 and updated a configuration. I checked /etc/hosts, connection via SSH between all hosts belonging to RAC: node1, node1-vip, node1-priv etc. Everything looks like fine, so I have no idea what caused this problem.
Software which I used:
Linux: UNL 5.4 x86_64
11g Release 11.1.0.7.0 - 64bit, Oracle Clusterware
Thank you for your answer,
Best Regards,
Edited by: user4924714 on 2010-02-15 07:50

Hi,
Thanks for your reply.
I am running addNode.sh from node which already exist in the Rac Cluster. I tried on node1, node2 but the resulat are the same.
Best regards,

Site not accessible from the Load balanced web front end server - sharepoint 2010

I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft Forum

Loop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

HD Not Accessible to Repair Permissions

Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
It appears my /Library/Receipts folder is empty.
What’s more, if I try to run an admin command in Terminal, like
sudo diskutil repairPermissions /
I get the message:
-bash: sudo: command not found
In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
When I type:
Users
I get
Users: command not found.
So I typed:
Echo $PATH
And get
/bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
Any and all help is appreciated. Thank you.

Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
Gee, I used to love my Mac ...

LSMW by BI : Unable to specify file in step 7; logical Path not assigned

Hi,
I'm trying to uplaod HR DATA using object 0555 and method 0000 for Program RPDUSTD00 using LSMW Batch Input Method.
In step 7 when i specify file which tab delimited text file at front end pc(at my pc) let say c:\test.txt and save I got error message 'Logical path not assigned'.
Please suggest what I'm missing and what i need to do to get it correct.
Thanks,
Anshuman.

Hi,
There are other files specified in the screen for imported and converted data. These files must be accessible on SAP application server. If the logical file names are not created use physical ones lik /tmp/blabla.lsmw.read etc.
Make sure you use different files for different objects.
Kind regards
Michael

Pulseaudio Error, Home Directory Not Accessible: Permission Denied

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 3.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013
D: [pulseaudio] main.c: Found 2 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 6aee4708a200492ea6f54ed069a7da94.
I: [pulseaudio] main.c: Session ID is 1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
E: [pulseaudio] core-util.c: Home directory not accessible: Permission denied

It seems to be fine in windows, I have logged a bug for Linux.
Thanks
Sue

Shared Variable Deployment not accessible in Build Specification

Hi everyone,
I have a large project developed in LV 8.6.1 from which I executed numerous applications. I converted the project in LV 11 sp1f1, everything works well in code, everything is saved.
I wanted to build executable without cod change for LV 11 here is what I found:
Build the executable with Build Specifications inherited from LV 8.6 for which I checked on Use Labview 8.x file layout in Advanced. My application programmatically deploys all internal shared variables and when I wanted to access the Shared Variable Deployment in project in Build Specification then labview locked and I have to kill LV. Other time I did not access the Shared Variable Deployment and I start building executable when it looks the build progressing similar as in LV8.6 and last step before popping the attached error all the saved files in the build location were deleted.
I set up a build specification just for this LV 11. Again I wanted to access the Shared Variable Deployment and again labview is looping something from which I had to kill labview. I opened it again, I skipped the shared variable deployment line and I build the application. Because my application programmatically deploys shared variables I included in builder the lvlib where shared variables belong. The build files does not includes this time as output the file *.lvlib for which my inherited LV8.6 code programmatic deploys shared variables.
My question is should I change the code (very large code) taking out the programmatic variables deployment and to relay on the build executable to do deploy them then what should I do with Shared Variable Deployment line in Build Specification which for my large application is not accessible or is any way to still use the shared variable as in LV8.6 but for which I need *.lvlib in build location.
Another important issue: when I launched my application built as I showed in previous second case, first thing that I see is that my application is not able to save errors (I have a log file where I save different drivers or communication errors). Any idea why application even without shared variable deployed is not able to write a text file? I am administrator of my computer with all rights.
Thank you,
Virginia

No, I am not able to close Labview because of the windows error with only one button to close application. The application is correct executed. Next time when I start this project it is asking me if I want o recover even if I accept to recover it looks what I had last time it does not save.
For my application also I am building a VI without diagram built as source distribution for which I set in my builder this top vi and I excluded everything from the project because my application copies instances at the run time of this vi as many times as hardware modules I have in the system and also I have this vi included in my application (for the content of this vi). My vi contains interfaces for hardware configuration as well as drivers functions call for each hardware module I have to control in my application. Everything is good building this vi, but in less then one minute after the build is executed and build interface closes again I have the windows error which force me to close project. Next time when I open project I did not see the option to recover the project.
In the mean time I received second message and I wonder if you refer to files names or to folder names or all together. I checked and the maximum size is 122 characters in the vi paths.
Thank you,
Virginia

Can't invoke PL/SQL cartridge for non-default virtual path

I have a problem invoking a cartridge if the virtual path is
anything but the default (/<appName>/<cartName>).
I have tried stopping and re-starting the application server, but
that does not help.
Does anyone have a solution to this problem?
Amar.
null

Elton Barendse (guest) wrote:
: Amar Pai (guest) wrote:
: : I have a problem invoking a cartridge if the virtual path is
: : anything but the default (/<appName>/<cartName>).
: : I have tried stopping and re-starting the application
server,
: but
: : that does not help.
: : Does anyone have a solution to this problem?
: : Amar.
: Hi Amar,
: Can't help you solve your immediate problem, but here's some
: food for thought ...
: Quintessence Systems Ltd (UK) have developed technology which
: automatically migrates PL/SQL procedures and packages to Java.
: This is in response to the many customers who are looking to
: move to a more open and non platform specific architecture for
: enterprise wide business logic.
: The Java code generated can be deployed in either Oracle 8i or
: in an App Server i.e. no need to wrap your existing procedures
: in a PL/SQL cartridge.
: If this is of interest, I'd be happy to put you in touch with
: our technical people to explain to technology in greater
detail.
: Elton Barendse
: CEO
: Quintessence Systems Limited
I had a similar problem and maybe it would resolve your troubles
I don't know but I configured the PL/SQL cartridge and it did
not work actually it was just a pb of virtual memory ,set your
mmory to 600M and restart all the stuff.I don't think it will
resolve the pb but think of it.
steve
null

Virtual path not accessible on IAS

Similar Messages

Maybe you are looking for