Virtual PC 7.0.2 not working

I have a Mac OS X 10.4.11, and Virtual PC had been fine since I got it in July 2007. I hadn't used it for a while, and now when I need it to install an update for a flash drive, the application opens but suddenly "quits unexpectedly". When I try to reopen it, it asks me about changing the settings.
How can I get VPC working again? I tried installing version 7.0.3, but it says I can't do that.
I'm not sure if there's any other information people would need to help me figure this out, but any tips you have would be greatly appreciated!

VPC on Macs is no longer a supported software, but you can get tech support at Microsoft's website since they now own the product.
All you can try is the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can locate the VPC preferences (probably in your /Home/Library/Preferences/ folder) and delete them on the chance the problem is a bad preference file. You could also try reinstalling the VPC software (first completely uninstall it.)

Similar Messages

Virtual key board functionality is not working in Fire Fox but works in IE/Chrome.

Hi Team,
In home page,Virtual key board functionality has been implemented and working fine in IE and Chrome but not in Fire Fox(all versions)
The value typed in first field(ex.12345) is getting appended in the second fiied value when we type abcd in second field like 12345abcd

Hi All,
Observed that //window.document.keyboard.SetVariable("out_ti.text", sendTextVKB);// is not working in fire fox and hence old value itself is avil.
Do we have any other option to get the above funcationality(setVariable)
Pls help me

Webmail worked, Enabled virtual host, now Webmail does not work! HELP!

Hey all, hope this is an easy one. I had mail, and webmail up and running for my main domain. www.example.com. and mail.example.com. I enabled virtual hosting under mail and added the local host alias for my second domain. www.example2.com. Users can now receive email sent to [email protected] Sounds good right. Well now my webmail server does not work, and whats worse is it brings up a list of the directory!!! Any ideas on how to get that back up?

ok, I changed the default index file to index.php, and now I can bring it up and login, but get an error where the folder list usually is...
ERROR:
ERROR: Could not complete request.
Query: CREATE "INBOX/Sent"
Reason Given: Invalid mailbox name

Virtual Wi-fi miniport adaptor 'not working properly'

Do I need this adaptor? I've been trying to set up a wireless printer and I think this is what is getting in my way. The printer software will not fully download, laptop can not find the printer, etc. I think it is this adapter. I've read some
other answers related to the 31 error (which is what I got) but I really don't understand the solution. There is no updated version, either. I have an Atheros Wireless network adapter. Is that good enough ?

Hello Ljuz,
What 31 error do you mean? Please share us the whole error message.
Please try to uninstall the virtual Wi-Fi miniport adaptor as Acreed02 mentioned.
Please take a look at the error code 31 in the following KB.
http://support.microsoft.com/kb/310123/en-us?wa=wsignin1.0
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Recommended resolution
Update the driver
Please try to update the driver of Atheros Wireless network adapter.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Server 2012 cluster - virtual machine live migration does not work

Hi,
We have a hyper-v cluster with two nodes running Windows Server 2012. All the configurations are identical.
When I try to make a Live migration from one node to the other I get an error message saying:
Live migration of 'Virtual Machine XXXXXX' failed.
I get no other error messages, not even in event viewer. This same happens with all of our virtual machines.
A normal Quick migration works just fine for all of the virtual machines, so network configuration should not be an issue.
The above error message does not provide much information.

Hi,
Please check whether your configuration meet live migration requirement:
Two (or more) servers running Hyper-V that:
Support hardware virtualization.
Yes they support virtualization.
Are using processors from the same manufacturer (for example, all AMD or all Intel).
Both Servers are identical and brand new Fujitsu-Siemens RX300S7 with the same kind of processor (Xeon E5-2620).
Belong to either the same Active Directory domain, or to domains that trust each other.
Both nodes are in the same domain.
Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).
All of the vitual machines have virtual hard disks.
Use of a private network is recommended for live migration network traffic.
Have tried this, but does not help.
Requirements for live migration in a cluster:
Windows Failover Clustering is enabled and configured.
Yes
Cluster Shared Volume (CSV) storage in the cluster is enabled.
Yes
Requirements for live migration using shared storage:
All files that comprise a virtual machine (for example, virtual hard disks, snapshots, and configuration) are stored on an SMB share. They are all on the same CSV
Permissions on the SMB share have been configured to grant access to the computer accounts of all servers running Hyper-V.
Requirements for live migration with no shared infrastructure:
No extra requirements exist.
Also please refer to this article to check whether you have finished all preparation works for live migration:
Virtual Machine Live Migration Overview
http://technet.microsoft.com/en-us/library/hh831435.aspx
Hyper-V: Using Live Migration with Cluster Shared Volumes in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/dd446679(v=WS.10).aspx
Configure and Use Live Migration on Non-clustered Virtual Machines
http://technet.microsoft.com/en-us/library/jj134199.aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support
I have also read all of the technet articles but can't find anything that could help.

Virtual Hosts - Configured but still not working -

I configured virtual hosts in my portal so that multiple companies can access there portal with their own domain name. It seems to work fine when i give the a direct link to the site. But some times the original server name is written back on the urls. For example, i am in www.abc.com/portal/page/portal/some_page and it will go back to www.original_server_name.com /pls/portal/page/portal while i am browsing. It doesn't do this for all of them. Is there something i need to set up??

Ok,
I reinstalled a new oracle portal from scratch and followed the virtual hosts guide by dannorris.com which stated that there where errors in the oracle documentation. After following the guide, the virtual hosts work when you go to the http://virtual_host_name.com. It sends you to the "Welcome to Oracle Application Server" page. However when you go and click the link that states
"To manage and monitor Oracle Application Server Portal, log on to Oracle Application Server Portal:
username: portal
password: ias_admin password specified during install"
it kicks you back to the original host name url. Any ideas??
I have multiple clients that need to login and see their domain names only and not the real server name.

Create Virtual folder automatically(auto populating not works under .lvlib)

Hello all,
I am developing a instrumentation drivers and each time, I need to make the virtual folders according to my physical driver folders. Please see the attached image for clear view of my question.
Thank you...!!
Attachments:
Forum.JPG ‏94 KB

Use the Add->Virtual Folder (snapshot) menu item. That will create the virtual folder with the current VIs that are in that folder.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Report on Virtual cube is not working.

Hi,
I created a report on virtual cube, Virtual cube is based on Function module which will pick data from Multiprovider, In the FM mention the import parameter name as " Muli Provider" Name.
Multiprovider built on SPO object , On SPO object BIA is created, If can de activate the BIA on SPO then the report built on virtual cube is working in the portal. If I can activate the BIA the report is not working in the portal.
The report is working fine in RSRT and Analyzer either BIA is active and deactive.
Regards
GK

Hi
The multi cube you created must be comprising of Info cubes, DSO and Info objects. Now this error which you are getting is it for
- a specific characteristics or
- any characterisitcs that is entered fourth in the series of filter selections or
- the fourth value in a specific characteristics
Is the characteristics and the value which you use in filter present in all the underlying objects included in the multi cube ? You can check it in each of the objects associated in the multi cube, independently. This will give you an idea as to whether the error reported by the system is genuine or not.
Cheers
Umesh

I have updated my iTunes to the newest version, 10-25 on a windows XP system. Now my java virtual machine is not working and I need it to run applet window. My Java is also newest version. What can I do to fix/repair my issue?

I need help with java on windowsXP after updating iTunes to the latest version. My java will not work and I get error message need java virtual machine to run applet window. Did not have this problem prior to the iTunes update.
Please help, Thanks

If your library was working on your computer and then popped up empty all of a sudden then this might be what you need...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine

Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine.
What are the recommended troubleshooting procedure?
Thanks,
sistec

Hi,
Audio redirection might not be configured correctly for the virtual machine, I recommend you refer to the audio\sound\usb redirection guide for the type of your virtual machine.
Hyper-V virtual machine
http://blogs.windows.com/bloggingwindows/2013/12/05/overview-client-hyper-v-enhanced-session-mode-in-windows-8-1/
Windows Virtual PC
https://technet.microsoft.com/en-in/library/ee449432(v=ws.10).aspx
If the settings are set correctly, then please check the driver for the
Microphone, update the driver, it also might be a driver compatibility issue with Windows Technical Preview.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When setting up converged network in VMM cluster and live migration virtual nics not working

Hello Everyone,
I am having issues setting up converged network in VMM. I have been working with MS engineers to no avail. I am very surprised with the expertise of the MS engineers. They had no idea what a converged network even was. I had way more
experience then these guys and they said there was no escalation track so I am posting here in hopes of getting some assistance.
Everyone including our consultants says my setup is correct.
What I want to do:
I have servers with 5 nics and want to use 3 of the nics for a team and then configure cluster, live migration and host management as virtual network adapters. I have created all my logical networks, port profile with the uplink defined as team and
networks selected. Created logical switch and associated portprofle. When I deploy logical switch and create virtual network adapters the logical switch works for VMs and my management nic works as well. Problem is that the cluster and live
migration virtual nics do not work. The correct Vlans get pulled in for the corresponding networks and If I run get-vmnetworkadaptervlan it shows cluster and live migration in vlans 14 and 15 which is correct. However nics do not work at all.
I finally decided to do this via the host in powershell and everything works fine which means this is definitely an issue with VMM. I then imported host into VMM again but now I cannot use any of the objects I created and VMM and have to use standard
switch.
I am really losing faith in VMM fast.
Hosts are 2012 R2 and VMM is 2012 R2 all fresh builds with latest drivers
Thanks

Have you checked our whitepaper http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a for how to configure this through VMM?
Are you using static IP address assignment for those vNICs?
Are you sure your are teaming the correct physical adapters where the VLANs are trunked through the connected ports?
Note; if you create the teaming configuration outside of VMM, and then import the hosts to VMM, then VMM will not recognize the configuration.
The details should be all in this whitepaper.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

Three keys of my keyboard are not working, the cap one, the return key and the space bar, while the virtual keyboard shows to others keys highlighted in orange (^ and `); How to fix it? I writing now with a bluetooth keyboard.

All new keyboards need Snow Leopard 10.6.8 and above for full functionality.
Rather short-sighted of Apple perhaps, but that seems to be a trend these days.
I'm afraid the only fix is to upgrade to SL. Personaly, I'd take it back and get a refund and seek an older keyboard or a third-party one elsewhere.

Twist s230u Volume control sticks down and virtual keyborad does not work

My Apologies if i have missed a fix for this somewhere.
I have a problem with the volume control sticking as if i was pressing it down. This happens as soon as I press a key on the actual keyboard.
The virtual keyboard will also not come up after an actual key is pressed and the windows button in the middle of the screen will not work either, only dims screen quickly and does nothing unless pressed a bunch of times really fast.
I also had to roll back to an earlier driver version for the mouse pad to halfway work, this also was not working after an actual key on the keyboard was pressed.
I Have done all driver updates with no luck.

Hi,
Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
Thanks.
Jeremy Wu
TechNet Community Support

Lenovo Bluetooth Laser mouse 41u5009 scroll wheel not working in Virtual PC

Firstly this is not a type I have a 41U5009 that is the model number printed on the bottom of the mouse and this mouse came direct from Lenovo with my T61p notebook. For some reason to get drivers for this mouse you cannot simply type in the model number on the Lenovo site as it does not recognize it as a valid model number.
My issue is that the driver I have or the mouse does not allow the scroll wheel to work under MS virtual pc 2007. I am running Vista 64 bit on the T61P laptop and the virtual pc I am running xp. If I plug in other mice such as MS cordless mini mouse or HP standard mouse the wheel from those mice works in the VM. But the wheel on the Lenovo mouse does not work, this makes me believe it is the Lenovo mouse that is the issue. I have tried using the Lenovo mouse on another pc ( a clone pc) and have the same issue with the wheel not working. I should point out that in the parent OS the wheel on the Lenovo mouse works fine. I should also point out that in the VM every other function of the mouse works fine, it is just the wheel part that does not get recognized.

Sorry, but pressing F7 did not do anything I could see in the mobile browser. I had to check with the desktop browser to see what it was supposed to do, and I don't think this caret browsing function exists in the mobile version.
Also tried installing the latest non-beta mobile FIrefox alongside the beta, without syncing anything, and the nonfunctionality of mouse scrolling is present in that one, too. Am considering giving up on mobile Firefox on at least this device.
Note: in case this information is useful, the mouse scrolling works on the Firefox start page with the thumbnails for most used links, but not on any other pages.

PC Suite with virtualized Windows NOT working

PC Suite (6.83.14.1) is not working with a vitualized OS, i tested it with
Linux (Ununtu) 7.10 as Host OS
VirtualBox 1.5.6 with USB support
Guest (virtualized) OS tried: Windows 2000, XP Sp2/3 and Vista sp1
The phone (nokia N73) connected bij USB is recognized, the modem is working, but wen connecting the phone it comes with an error:
"PC Suite does not recognise the connected phone. The connection between the PC and the phone failed, error code 0x80044403. Switch off your phone, switch it on, and try again."
in Windows management the phone is recognized, correctly
as "Nokia N73 USB Phone Parent" and below that device:
- Nokia N73 as: COM3, Generic, Modem, en 2 OBEX devices.
also below "Ports" the phone is visible as USB(COM3)
Al (!) my other USB devices like USB stick's USB-DVD-recorder are working fine.
also Windows CE-devices, like a Navman (Windows CE), connected by Microsoft activesync are working perfect.
PC Suite is necessary to run firmware upgrades!
So, it lookes likes a PC Suite problem, while everything is functioning except PC Suite.
Message Edited by rolandbreedveld on 27-Mar-2008 12:11 PM

PC Suite ver 7.0 is NOT working with virtualised OS. I have tested on OpenSuse 11.0 as HOST OS with SUN xVM VirtualBox Graphical User Interface 2.0.2 with USB Support enabled. The Virtualised OS is Windows XP with all Service Packs / Windows updates loaded.
The Phone E90 Communicator is connected via USB
In Windows management the Phone is recognised as Wireless Communication Devices --> Nokia E90 Communicator USB Phone Parent.
When connecting the Phone it shows an error:
"PC Suite does not recognise the connected phone. The connection between the PC and the phone failed, error code 0x80044403. Switch off your phone, switch it on, and try again."
PC Suite is required to backup the phone, etc so that I can use the E90 in Virtualised Windows on OpenSuse 11.0.
Would Love to have this working. Hate using Windows only to access the Phone since OpenSuse 11.0 is my primary OS. I will have to reboot the system, select Windows XP if all I have to use Windows XP is for accessing the Phone.
Appreciate a revert at the earliest.
Live every day like it is your last.
You have only 1 lifetime , NO matter what different religions tell you. DO good in all that you do.

Virtual PC 7.0.2 not working

Similar Messages

Maybe you are looking for