Virtual PC 7 problem

Well now that I have upgraded to version 7, it is not working as well as 6 was. I have been searching for microsoft support, but just like their OS, no organization whatsoever.
Maybe someone here has seen this problem.
Windows 2000 was running fine in version 6 with only one new windows program installed on it.
I upgraded to version 7 as per the instructions, then imported the virtual machine into the new version.
When windows started up, i tried to start my one program. Even though I had the cd in my internal drive, windows prompted me to insert it, as if it couldnt see it. Worked fine in version 6.
Also my mouse pointer in version 6 could go over the whole screen, windows and mac. Now once I bring it over the windows part, I cant bring it back to the mac side of things to see the dock/hot corners ect.
These might be settings or a real problem, but i am lost in windows. From the best I could find Microsoft wants $35 a pop for phone support.
I would like to stick with this newer version, but if I can't find any answers I am going to be forced to ditch the newer version and go back to version 6.
Any input would be very helpful.
John

You'll have better results with your question if you post it in a forum specifically for Microsoft Office or Virtual PC. Point your web browser to Google Groups and and look for the microsoft.public.mac.office.virtualpc group.

Similar Messages

  • CFMX 6.1's Virtual Memory Use problem!!

    I appologise for the long post in advance...
    Ok... so I have this script that, using cfdirectory, will
    check a directory for any files that may have been uploaded, if
    there are files, it loops through the results and reads the files
    one at a time, line by line, using the FileReader.cfc (Uses the
    Java FileInputStream, InputStreamReader, and BufferedReader to
    provide a way to incrementally read large files). The files are
    just pipe "|" delimited data, each line represents a record for a
    db table.
    Now as it's reading each line, it will perform some basic
    string parsing to clean up the file line to make sure the data is
    valid, blah blah blah and then it will write that "cleaned" line to
    another file using FileWriter.cfc (Java component once again). Once
    it's completely done reading the original file, it will close it
    and it will open the new "cleaned" version of the file, read it
    (FileReader.cfc), create an INSERT statement and then update the
    database table.
    Now... this all works GREAT... until it has to loop through
    more than a few files... 3 - 4 files are NO problem! works like a
    charm, but throw 6 - 8 files at it and it dies, not a timeout mind
    you but an actual "java.lang.OutOfMemoryError" (now, I've tried
    making all the files exactly the same (just changed the name) and
    the weird thing is, it takes longer and longer to process each as
    it goes through the loop... I have the script write some stats as
    it's looping:
    FILE 1 STATS
    Name: COA0607_Intranet1.DAT
    Status: Import Successfull
    Line Count: 32,971
    Processing Time: 74,237ms
    FILE 2 STATS
    Name: COA0607_Intranet2.DAT
    Status: Import Successfull
    Line Count: 32,971
    Processing Time: 82,018ms
    FILE 3 STATS
    Name: COA0607_Intranet3.DAT
    Status: Import Successfull
    Line Count: 32,971
    Processing Time: 94,476ms
    FILE 4 STATS
    Name: COA0607_Intranet4.DAT
    Status: Import Successfull
    Line Count: 32,971
    Processing Time: 145,108ms
    I know what you guy are probably thinking; "Woah man... CF
    isn't really meant to do that kind of processing...", I know, trust
    me I know... however, I really neeeeeed it too lol.
    Ok, so as the script is running, I watch the Virtual Memory
    use of jrun.exe, processing say 3 - 4 of these files brings up the
    usage to approx 300,000k which yes, is a LOT but that's fine...
    this process is meant to run at night via a Scheduled Task...
    When I run more than 4 files, things start to get ugly, keep
    in mind that these are EXACTLY the same files just re-named
    differently. The script will start lagging BIG time and on the last
    file (usually the last file) I'll see the memory usage spike from
    350,000K all the way up to 600,000K and that's when it throws the
    "java.lang.OutOfMemoryError" and dies... I've tried commenting out
    the part of the script that updates the db, but still get the same
    problem...
    So... what gives? How come CF Server does this??? I mean, it
    runs fine for the first few files... and then WAM, it dies... sorry
    for the long post... any insight here is VERY much appreciated...
    it would be AWESOME if the wonderful folks at Adobe could shed some
    light on this for me : )
    CFMX 6.1 version: 6,1,0,83762
    Windows XP Pro SP2
    Intel P4 2.8Ghz
    1Gb of Ram

    quote:
    Originally posted by:
    Mr Black
    300M memory usage while using "incremental" file reader??
    Looks like it is "incremental" only in the sense that it increments
    memory usage. Did you try non-Java C/C++ file reader tags?
    Well I did try cffile originally... and it didn't even run...
    lol

  • [SOLVED] Guest Arch in Virtual Box Internet Problems

    I have installed Arch a few times already in virtual machines on Virtual Box and each time it is unable to configure the internet connection properly.  Having gone through the beginner wiki-pages on starting with Arch, I have tried "ping -c 3 www.google.com" and get "ping: unknown host www.google.com".  However, IP addresses usually work with 0% packet loss.
    I then followed the "hwdetect" instruction and that yielded "-bash: hwdetect: command not found".  The command "modprobe pcnet32" does not yield an error and returns nothing.
    I have also tried other methods
    http://eligere.wordpress.com/2008/03/05 … i-problem/
    http://bbs.archlinux.org/viewtopic.php?id=55811.
    Thanks.
    Last edited by zeug (2009-05-08 23:03:56)

    Wikimig wrote:
    Hi,
    Pretty much the same here
    That is strange but adding "nameserver 192.168.0.1" to /etc/resolv.conf enables me to access the internet. 192.168.0.1 is of course the IP of the host computer's vitual card but what is strange is: I need to use dhcpcd from guest to be given an IP that isn't even in the same range as 192.168.0.1 (for instance 10.0.2.15)!!
    So to basically, host PC has that virtual ethernet card with static IP 192.168.0.1 and internet connection shared (don't know if this is compulsory though) and guest uses dhcp, is given 10.0.2.15 (don't ask me where it gets it from because I disabled it on VirtualBox). Then I just have to add "nameserver 192.168.0.1" to resolv.conf and I'm good... till dhcpcd rewrites the resolv.conf. How could we set dhcp to use a particular DNS?
    As you can see, I am not a DNS expert. Using static IPs for both would be great but it doesn't work
    Does it help?
    The 10.x.x.x.x address range is assigned because you are most probably using NAT networking on the Virtual Box configuration.
    Try with 'Bridged'.
    If all goes well you shouldn't need to fiddle with /etc/resolv.conf.
    Still, if you still need to change /etc/resolv.conf, put your changes in a file called /etc/resolv.conf.head which will survive
    the changes that sometimes DHCP does on /etc/resolv.conf.
    Mektub

  • ASR 1002 PPPoE/A Virtual-Access subinterface problem

    Hi Guys,
    i try to configure a BRAS solution for PPPoE/A termination.
    When try to connect a client i receive the following error:
    *May  3 00:51:25.043: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to up
    *May  3 00:51:25.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access4, changed state to up
    *May   3 00:51:25.093: %FMANRP_ESS-4-FULLVAI: Session creation failed due to  Full Virtual-Access Interfaces not being supported. Check that all  applied Virtual-Template and RADIUS features support Virtual-Access  sub-interfaces. swidb= 0x40A8D2CC, ifnum= 29
    *May  3 00:51:25.098: %LINK-3-UPDOWN: Interface Virtual-Access4, changed state to down
    The problem is related to Virtual-Access subinterface, usually,  on standard IOS,  i work on full mode
    In the Cisco DOC i found this:
    "If the subinterface is not configured, the following error message is  displayed when creating a session with one of the RADIUS attributes:
    *Mar 13 22:04:03.358: %FMANRP_ESS-4-FULLVAI: Session creation failed due to Full
    Virtual-Access Interfaces not being supported. Check that all applied Virtual-Template and
    RADIUS features support Virtual-Access sub-interfaces. swidb= 0x7FA35A42F218, ifnum= 30
    To enhance the scalability of per-user configurations, in many cases,  different Cisco AV-pairs are available to place the subscriber interface  in a Virtual Routing and Forwarding (VRF) instance or to apply a policy  map to the session. For example, use the ip:vrf-id and ip:ip-unnumbered  VSAs to reconfigure a user's VRF. For information about enhancing  scalability see, "Enhancing the Scalability of Per-User Configurations" section."
    Ok i try to pass in radreply the following attribute :
    test    Cisco-AVPair     +=     ip:vrf-id=RACC_ULL
    test    Cisco-AVPair     +=     ip:ip-unnumbered=Loopback 199
    Nothing don't work same error ....
    If remove a "ip-unnumbered" attribute the Virtual-Access coming up but no ip address is assigned
    Any ideas ?
    Many thx
    show ver
    Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.1(3)S2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Mon 12-Dec-11 15:15 by mcpre
    Cisco IOS-XE software, Copyright (c) 2005-2011 by cisco Systems, Inc.
    All rights reserved.  Certain components of Cisco IOS-XE software are
    licensed under the GNU General Public License ("GPL") Version 2.0.  The
    software code licensed under GPL Version 2.0 is free software that comes
    with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
    GPL code under the terms of GPL Version 2.0.  For more details, see the
    documentation or "License Notice" file accompanying the IOS-XE software,
    or the applicable URL provided on the flyer accompanying the IOS-XE
    software.
    ROM: IOS-XE ROMMON
    ASR-01-BS uptime is 6 days, 18 hours, 6 minutes
    Uptime for this control processor is 6 days, 18 hours, 8 minutes
    System returned to ROM by reload at 22:08:16 UTC Sat Mar 31 2012
    System image file is "bootflash:asr1000rp1-adventerprisek9.03.04.02.S.151-3.S2.bin"
    Last reload reason: PowerOn
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco ASR1002 (2RU) processor with 1700062K/6147K bytes of memory.
    4 Gigabit Ethernet interfaces
    1 ATM interface
    32768K bytes of non-volatile configuration memory.
    4194304K bytes of physical memory.
    7757823K bytes of eUSB flash at bootflash:.
    Configuration register is 0x2102
    show run
    aaa new-model
    aaa group server radius AAA_RACC_ULL
    server-private xx.xx.xx.xx auth-port 1812 acct-port 1813 key xxxxxxx
    server-private xx.xx.xx.xx auth-port 1812 acct-port 1813 key xxxxxxx
    ip vrf forwarding RACC_ULL
    aaa authentication login local_auth local
    aaa authentication ppp default group AAA_RACC_ULL
    aaa authorization network default group AAA_RACC_ULL
    aaa accounting send stop-record authentication failure
    aaa accounting update newinfo periodic 60
    aaa accounting network default start-stop group AAA_RACC_ULL
    aaa accounting connection default start-stop group AAA_RACC_ULL
    aaa accounting resource default start-stop group AAA_RACC_ULL
    aaa session-id common
    aaa policy interface-config allow-subinterface
    ip vrf RACC_ULL
    description *** VRF Raccolta TEST ***
    rd 1:1
    vpdn enable
    no virtual-template snmp
    bba-group pppoe xDSL_PPPoE_ADSL
    virtual-template 199
    vendor-tag circuit-id service
    sessions auto cleanup
    interface Loopback199
    description *** GW RACCOLTA IP ADSL ***
    ip vrf forwarding RACC_ULL
    ip address 10.0.0.1 255.255.255.255
    interface GigabitEthernet0/0/0
    description *** ***
    no ip address
    no ip proxy-arp
    load-interval 30
    negotiation auto
    interface GigabitEthernet0/0/3.20
    description *** DOWNLINK TO DSLAM VLAN ADSL ***
    encapsulation dot1Q 20
    ip vrf forwarding RACC_ULL
    no ip proxy-arp
    pppoe enable group xDSL_PPPoE_ADSL
    interface Virtual-Template199
    description *** PPPoE AUTH ADSL ***
    mtu 1488
    ip unnumbered Loopback199
    peer default ip address pool DYNAMIC_ADSL
    ppp authentication chap pap callin
    ip local pool DYNAMIC_ADSL 192.168.20.2 192.168.20.254
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    ip route vrf RACC_ULL 0.0.0.0 0.0.0.0 192.168.254.1
    ip radius source-interface GigabitEthernet0/0/0.999 vrf RACC_ULL
    radius-server vsa send accounting
    radius-server vsa send authentication

    Hi Manuel,
    thanks for your answer.
    Below the other attribute send from radius to ASR
    Framed-MTU     :=     1488
    MS-Primary-DNS-Server     :=     62.97.32.21
    MS-Secondary-DNS-Server     :=     62.97.33.21
    Framed-Protocol     :=     PPP
    Service-Type     :=     Framed-User
    Framed-Compression     :=     Van-Jacobsen-TCP-IP
    If possible i prefer to work using only virtual-template mode without per-user VRF.
    I try con configure VT using ip vrf forwarding RACC_ULL and ip unnumbered ( in the same VRF domain ) without success.

  • Virtual Box Guest problems with libgl

    Hi.
    I had a Virtual Box (under Windows 7 64 bits) running for a few days with no problems.
    It run updated Arch, with KDE.
    Yesterday the problems started, after doing "pacman -Syu", something has changed...
    From now on, when I start X, I only get a black screen.
    I've traced the problem to the libgl library - if it's not installed, X starts correctly. If it's there - X fails.
    In order to verify my assumption, I've installed a new Virtual Machine according to the "unofficial beginner's guide", installed X, tested it, installed XFCE4, tested it - so far all OK.
    Then, I've installed audacity (it also uses libgl, and I wanted to avoid KDE to be sure it's not with them).
    And now - there is this failure in the Xorg.0.log:
    [  6552.010] (EE) AIGLX error: vboxvideo does not export required DRI extension
    (I wanted to attach the 2 log files, isn't it possible??)
    Thanks,
    Zvika

    This is a bug in virtualbox. Somebody said it happened upon upgrading nvidia drivers on the host machine: https://www.virtualbox.org/ticket/4789

  • Equium A100-147 Virtual Sound reinstall problem

    I have read a few posts relating to the same problem I have, but with no definitive answer. I have the Equium A100-147 with Windows XP Media Center. I downloaded some up to date files from the Toshiba site (all for my model), including:
    acsil-xpmce-100008-en
    assist-xpmce-10300-en
    confree-xpmce-59007ab-en
    csutil-xpmce-7211006
    ctrls-xpmce-3221506-en
    display-xpmce-142004543
    fmd-xpmce-2004
    pcdt-xpmce-321u-en
    pwrsav-xpmce-70307i-en
    sdform-xpmce-2200-en
    sd-secure-xpmce-104-en
    sound-xpmce-51005253
    toupad-xpmce-10001st-en
    and then: tvs-xpmce-10312-en (latest Virtual Sound driver for the A100-147)
    I uninstalled the old version of the Virtual Sound driver before attempting to install the new one. But as I have seen elsewhere, I get the message:
    "Toshiba Virtual Sound does not support your computer."
    I have spent all afternoon looking up and trying to think of ways to fix this. I have since updated my BIOS (bios-550win). Not one thing I try will make it work. I have even deleted references to Virtual Sound in the registry in case there was any conflict going on. It has made no difference though.
    Could someone from Toshiba please explain why I am being told that I cannot install what was working perfectly well until this morning, prior to these updates, which are all for my notebook model? It's ridiculous. Apologies for my tone, but having wasted hours on this, I am extremely frustrated and just want my laptop back the way it was (and before you ask, yes, I have tried a System Restore, but that does not work either).
    Thanks,
    Mac

    I ran some report the other night... not sure if this gives a clue to anything:
    TVSASI v1.002 - TOSHiBA Virtual Sound Audio Service Information
    Caption : "Realtek High Definition Audio "
    Description : "Realtek High Definition Audio "
    DeviceID : "HDAUDIO\FUNC_01&VEN_10EC&DEV_0861&SUBSYS_11791205 &REV_1003\4&1E09AF89&0&0001"
    Manufacturer : "Realtek "
    Name : "Realtek High Definition Audio "
    DeviceIDName : "HDAUDIO\FUNC_01&VEN_10EC&DEV_0861&SUBSYS_11791205 &REV_1003\4&1E09AF89&0&0001"
    ProductName : "Realtek High Definition Audio "
    Status : "OK "
    Service Name for needed for TVS: "IntcAzAudAddService"
    //eof
    So the Realtek driver works fine, but still cannot installed the Virtual sound driver.

  • SWT Virtual Tables display problem.

    Hi all,
    I have a display problem with virtual tables.
    In an Eclipse RCP application, I have a view that shows two tables, T1 (showing users) and T2 (showing the roles).
    I also use a content provider and a label provider for each table.
    When I debug, I can see that both tables are filled correctly.
    But when the application comes up, T1 is empty and T2 is filled. I am missing the users in the table T1.
    The interesting thing is, that the table do not very differ much from each other, T1 has one column more and of course IUser object as data per tableitem, whereas T2 has IRole objects as tableitems.
    Even when I debug on event listening in T2, I can get the T1 data of each tableitem, but it doesn't show?!
    My question is, where can I look at to solve this problem?
    Just theoretically, without posting source code.
    Thanks and regards,
    Tom

    Hi,
    I found out that the table T1 seems to miss the user object in each of the tableitems data fields.
    Now I am confused.
    According to the model, when does it get filled with it?
    Because the Labelprovider
         public String getColumnText(Object element, int columnIndex) {
              String result = null;
              if(element instanceof IUser) {
                   IUser user = (IUser) element;
                   if(columnIndex == 0) {
                        result = user.getName();
                   } else if(columnIndex == 1) {
                        result = user.getUserId();
                   } else if(columnIndex == 2) {
                        //This is a checkbox Member
                   } else if(columnIndex == 3) {
                        //This is a checkbox Manager
              return result;
         }gets all the correct data.
    Is it removed afterwards?
    Thanks and regards,
    Tom

  • Virtual Host & NetStorage Problem

    Good Morning,
    I recently moved my NetStorage server over to SLES 10.2 w/OES2sp1.
    The Basic NetStorage Service has been configured and is working, however these are the issues that still remain after many changes to configurations (mostly Apache2):
    Virtual Hosts: I like to have my servers that use Virtual Hosts setup that if you browse to the internal server name (i.e. servername.domain.local) I get the Novell Welcome Screen, and when I browse to NetStorage (i.e. NetStorage.domain.org) I have a redirect setup to: netstorage.domain.org/NetStorage and it takes me to the NS Login page.
    I can get one or the other working, but not both. This used to work fine on NetWare.
    NetStorage w/Internet Explorer: When IE 6 is used to access NetStorage (after moving onto Linux), instead of getting a prompt to accept the certificate, I see the certificate text on the right side of the NetStorage home page and I can not login. With IE 7, I get prompted to accept the certificate, but I still get the text and can not login.
    With Firefox, it works fine.
    Any insight is welcome,
    Thank you,
    Tony

    Originally Posted by afiore
    Good Morning,
    I recently moved my NetStorage server over to SLES 10.2 w/OES2sp1.
    The Basic NetStorage Service has been configured and is working, however these are the issues that still remain after many changes to configurations (mostly Apache2):
    Virtual Hosts: I like to have my servers that use Virtual Hosts setup that if you browse to the internal server name (i.e. servername.domain.local) I get the Novell Welcome Screen, and when I browse to NetStorage (i.e. NetStorage.domain.org) I have a redirect setup to: netstorage.domain.org/NetStorage and it takes me to the NS Login page.
    I can get one or the other working, but not both. This used to work fine on NetWare.
    NetStorage w/Internet Explorer: When IE 6 is used to access NetStorage (after moving onto Linux), instead of getting a prompt to accept the certificate, I see the certificate text on the right side of the NetStorage home page and I can not login. With IE 7, I get prompted to accept the certificate, but I still get the text and can not login.
    With Firefox, it works fine.
    Any insight is welcome,
    Thank you,
    Tony
    I am having the same problem. Did you ever find a solution to this?

  • Virtual Photo Book problem

    hi all,,,
    New to adobe i am trying to create digital/virtual Book type Photo Albums ,, not necessary to print out but more to view in a book like fashion on a pc.
    The first project is a wedding album to save to file (or CD) and distribute to friends and family.
    Its taken me about 3 weeks and i still havnt really started yet,,,
    Heres what ive tried so far,,,
    I first tried this using iPhoto ,,, creates a nice book, easily ,,, but only option to get it on disc is as a pdf, which didnt carry across all the background formatting ,,, bummer
    Next tried Powerpoint 2007, this can create a slideshow type photobook and even run without all of powerpoint from a cd,,, sounds good ,, but very limited templates to do what i trying to do ,, also ,, seems i would end up with a very large file rather quickly
    next,, spend a Lotttt of time sifting through Adobes confusing mirage of software, and i know have "photoShop Elements installed !!!
    Heres my problems in Elements,,,
    I did a trial run at creating a OnLine Album,,, I think this is the Way to Go ,,, verygood ,,,Buttt,,,
    Problem 1,,, in 'Change template' i dont see a suitable template,,, close but not one i want ,,, can any one give info on where i can get ' Book Type Template' (Addin?) to use here ,,, similar to those in iPhoto
    Next,, i choose the 'Export to CD/dvd option ,, all seems to go onto the CD ok ,,,, yet when i try to play the CD ,,, Macroedia FlashPlayer 8 opens but  ,, i just get little square pics of a Flower,, like cards stacking ,, as though its timing out something ,,,, Thats it,,,
    ,, i just want a good quality 'Coffee table type PhotoAlbum ,, On my PC not the Coffee table
    Thanks for any help with this,,,
    Regards
    Tim
    ps; i contacted adobe re the Book type Templates and they said they are available on the Kodak sight ,,,, hmmm ,,, all i could se there was templates to purchase (thats fine) ,, but still only for there Book ordering Service ,, Not for digital,,,,

    The photobook which gets created in Photoshop Elements can only be saved as a .pse or pdf. So your problem remains, What you can try is creating Collages with your images. The option to create collages is present under the Create tab in Editor, Then save them and create a slideshow using these collages as the images, Slideshow option is present under the Create tab in Organizer.

  • Virtual Machine installation problem

    I received the following error message while trying to create a virtual machine on my computer:  "the virtual machine configuration could not be created.  An unexpected error occurred."  How do I fix this problem?  I am running
    window 7 ultimate SP1 on an AMD FX 8320 8 core machine with 16 GB of RAM.

    Hi,
    can you describe what you are doing, please.
    I think we need some more Information:
    What are you doing? Converting? From what to what?
    Tool-Versions?
    Regards
    Eric
    Eric Berg -- http://www.ericberg.de -- MCSE: Private Cloud MCSE: Server Infrastructure MCSE: Desktop Infrastructure

  • Virtual PC networking problem

    Hi,
    Lately my Virtual PC (7.0.2) running Win2k can't reach the network anymore. I cannot mount shares, and I cannot reach any web sites. Everything just imes out. This is on my PB 17" 1 GHz with 10.4.6 and all the latest updates. It used to work okay for the last years, and I believe I didn't change anything lately. (Except for the OSX updates.)
    VPC networking is setup as shared. I tried turning on and off the firewall in OSX. The odd thing is I can ping the local server on the network, but I cannot get a http response from that same server, telnet to it, or whatever else I try. Obviously, OSX can access that same server without any problem.
    Any ideas what else I can try?
    Thanks,
    Ben
    PB 17" 1GHz and PowerMac dual 2 GHz G5   Mac OS X (10.4.6)  

    Did you recently upgrade to 7.0.2?
    A while ago, but I believe networking still worked after that. Not sure though, because I don't use it too often. (Just found out I was 23 critical win2k updates behind...)
    Did you delete any preference files?
    No.
    Glad to hear it is working now.
    Yes, thanks again. I have the problem on both my Macs actually, so I'm going to change the other one too.
    Ben
    PB 17 and dual 2 GHz G5   Mac OS X (10.4.6)  

  • Virtual Server Conversion problem

    Hello Team,
    I am facing a problem where my virtual server IP is translated wrongly on the Cisco 7604 router. The TCP connection related is dropped due to this IP. I checked the vserver configuration and found that the TCP drop could be due to Idle 10 config on the serverfarm config. I am attaching the running configuration along with the problems we are facing:
    1. Node X sends “Keep Alive” message on TCP session to Node Y.
    2. Router converts real IP address of Node X to virtual IP address.
    However, although virtual IP address should be “172.20.40.20”, Router converts it to “10.129.120.7x”.
    6. Node Y receives “Keep Alive” message on TCP session from “10.129.120.7x”. However the source IP address is abnormal as the TCP session so Node Y discards this “Keep Alive”.
    7. Router detects that Node Y has never responded to Node X against “Keep Alive”. As the result, router Resets the TCP session.
    8. Due to the above, all TCP sessions are disconnected.
    The Running Config is attached for reference.
    Regards
    Hemanth

    Hi Glenn,
    According to your description, my understanding is that you could not access site pages after doing a virtual migration using VMware Converter.
    Please run the PowerShell command below on the VMware vSphere 5.5 v10 machine:
    psconfigui.exe –cmd setup –runbysetup
    There are two similar posts for your reference:
    https://social.technet.microsoft.com/Forums/en-US/7f903e1d-4965-4d4a-87e7-114f43bd4501/sharepoint-2010-the-trial-period-for-this-product-has-expired
    http://retrohack.com/sharepoint-2010-trial-period-expired/
    If this issue still exists, please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Virtual Server Logging Problem

    I'm currently using Sun Application Server 9. I've created a virtual server together with a new listener on a port 8081. I have two problems here:
    1) The website on the virtual server runs fine. And I've coded System.out.println on several servlets for assisting purposes. My problem is that, i can't see those message printed on the server.log by System.out.println.
    2) The same copy of WAR file has been deployed to the virtual server which it's able to perform JDBC functions in default server. Thing turns funny when the same WAR file that runs on the virtual server is unable to perform the JDBC functions.
    Can't figure out why. Please help me.
    Thanks!

    There are two kinds of virutal servers - IP/Socket/Port based, and URLHost based.
    You created a IP/Socket/Port based virtual server. Instead, you should look for the URLHost fiend in the virtual server pages and change it to reflect the correct DNS name it should respond to. Make sure this VS (and the default) are both attached to the port 80 listen socket.

  • Virtual mail domain problem

    I upgrade to 10.5 and it did a lot of damage. I got most of it back into shape, however, I have email addresses with the same user name but different domain. So in tiger if I wanted to keep those separate, I create one with the username bob and the second one with username bob2 and a shortname of [email protected] and it all worked.
    So user bob has email address [email protected] and user bob2 has email address [email protected] Which makes two mailboxes.
    Now if I do that, ANY virtual domain I have with same name goes to one box. I.E. [email protected] goes to [email protected] Even if I don't have a specific account setup with an address like [email protected], it will still go through to the one box.
    Any one seen this problem or know where to look to fix it?
    Thanks,

    I don't remember exactly but the post lead me to this article on topicdesk. http://osx.topicdesk.com/content/view/45/41/
    Instead of using shortnames I used postfix aliases and that solved it all. However, it is not a fix to the problem at hand because this means every time you want to add a virtual user you have to go edit a file and bounce postfix.
    Lame.

  • Virtual Memory Allocation problem

    When I run compile some source code in F90, I receive the following error message:
    /usr/bin/ld: can't vm_allocate() buffer for output file of size 1699768758 ((os/kern) no space available)
    What seems to be happening is that the system wants to allocate a large amount of memory. I have over 14 Gb of virtual memory available and over 2.5 GB of RAM available. Another forum ( http://www.archivum.info/gnu.gcc.help/2007-08/msg00083.html ) said the memory needs to be contiguous. I need to compile this, and I have sufficient memory to do so. What must I do to make this work?
    I tried the following:
    cd /usr/bin
    sudo mv ld ld32
    sudo ln -s ld64 ld
    This did not solve the problem as now the error says:
    ld64-62.1 failed: 32-bit pic-base out of range in atexitcommon from /usr/local/gcc/4.2.2-32/lib/gcc/powerpc-apple-darwin8.9.0/4.2.2/crt3.o

    I'm assumming that your operating system is Windows NT 4, Windows 2000, or Windows XP. For others reading, this is a link to the above referenced KnowledgeBase article.
    NI-DAQ does not require you to invoke the VirtualLock function. NI-DAQ will page lock the buffer passed to the SCAN_Start function. It is possible that, since the buffer has already been paged locked by your code, that there are insufficient resources (i.e., kernel-mode Page Table Entries (PTEs)) available for NI-DAQ to page lock the buffer.
    Remove the invocation of the VirtualLock function and see if that helps.
    Geoffrey Schmit
    Fermi National Accelerator Laborary

Maybe you are looking for