Virtual PC and Activesync
I have a windows-based pocketpc based device that I want to sync with my powerbook. I installed Virtual PC 7 and Outlook. Activesync won't recognize the device when I plug it into the USB port and I don't know how to get Bluetooth working on the virtual PC. Any ideas for getting Activesync to work with the virtual machine or getting the pocketpc to sync with my mac directly?
There are a couple solutions that work and are much preferrable to VPC based solutions. The Missing Sync is the most popular.(http://www.markspace.com/missingsync_windowsmobile.php)
MacWorld gave PocketMac 4 of 5 Mice. (http://MacintoshPocketPC.com)
Hope this helps. I've tried the VPC route for a few things, but for almost everything, there is a better option!
Similar Messages
-
Virtual PC and ActiveSync (for a Windows phone): anyone get it to work?
I am currently using Virtual PC 7.0, running Windows 2000, and am trying to get ActiveSync to recognize my USB-connected Windows Mobile 5.0 phone (Sprint PPC-6700).
ActiveSync installs okay, but it fails to detect the phone when it's connected via USB.
When I click on the USB icon at the bottom of the VirtualPC window, the Mobile Phone is listed as being connected. Also, when I look in My Computer (within Windows), a mobile phone device is present). However, ActiveSync cannot seem to "see" that the phone is connected.
Any thoughts?
(I am aware that both Mark/Space Missing Sync and PocketMac are working on Windows Mobile 5.0 versions of their products; however, at this time, only Windows Mobile 2.0 devices are supported).
Thanks!Just want to add to this...it was resolved the Advanced tab is very important on mail.app.
The Advance tab authentication must match what the Exchange server/Active Directory is using.
For us NTLM is what we need to use.
Also we found that one exchange server had a bad installation while another had no problem connecting via mail.app.
Thus the installation is going to be looked at. -
How to delete Ubuntu virtual desktop and free up allocated space in windows 8?
I have tried out Hyper-V for the first time to install Ubuntu desktop. During the installation process, 10GB of space is allocated. I believe this space would have been created as a separate partition and formatted
to linux file system. Please correct me if I am wrong.
Now I would like to remove the Ubuntu virtual desktop and free up the allocated space. I have deleted the desktop from the Hyper-V manager. Is this sufficient to free up the space?
Disk partition tool shows following partitions
Volume
Layout
Type
FS
Status
Capacity
Free
Volume (C;) Simple
Basic NTFS
Healthy(Boot, Page File ...) 218GB
8GB
Volume <nolabel> Simple
Basic Healthy(Recovery Partition)
450MB 450MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
350MB
350MB
Volume <nolabel>
Simple
Basic
Healthy(Recovery
Partition)
10.5GB
10.5GB
Volume <nolabel>
Simple
Basic
Healthy(EFI
System Partition)
260MB
260MB
Volume <nolabel>
Simple
Basic
Healthy(Primary
Partition)
8GB
8GB
I am not sure of the unnamed, unused volume. Hence I listed all.
However Diskpart tool in command prompt does not show the last one [ 8gb]. Does this mean if this was allocated
to Virtual desktop? Please helpYou must delete the VHDx that you created when you created the VM.
This is the virtual disk that Ubuntu was installed into - you will not see this as a volume, you will see this as a VHDx file.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Problem with Virtual PC and Network Connection - VPC gets disconnected
Hi,
I've been having a few problems with a virtual computer and its network connection. I've set up a few computers the same way over the years and they all work fine except this one. We use the Virtual PC and XP mode to access our data from an older
program. The databases are on a server, which are accessed as a mapped drive. Every once in a while (with no particular pattern, sometimes it doesn't happen all day, sometimes it happens every 5 mins), the VPC gets disconnected from the network,
my program returns a file read error and then everything is frozen. When I try to ipconfig/release and renew, it releases correctly then it won't renew. I need to shut down the VPC from the Win7 task manager and even so, it doesn't shut it down,
even when I try to kill the vpc process. The only way it'll come back up is if I restart the computer. The network connection on the Win7 computer doesn't do that.
Is there anything I can do to fix this ?
Thanks,
MelanieHi,
Does it become more stable now, actually, I'm afraid that this issue is not related with the drive letter or name. Since you're using bridge mode, the I would suggest you use NAT as a test, it is the default network configuration, which allows the VM
to leverage the external TCP/IP network connected to the host. This is very useful if you regularly move the host computer between different network configurations. NAT is the preferred networking option when there is a shortage of IP addresses, a need to
ensure the VM’s IP address is not targetable from an external network, or a need for connecting using WWAN.
Yolanda Zhu
TechNet Community Support -
Following the book in chapter 2 I think Ivé followed everything correctly, but have encluded all the things I've edited below.
I was using wamp with no problems but after trying to set up a virtual host and now using xampp im abit lost its probabsomething stupid but I can find the prob.
(This post is abit long and dragged out so I used some colour to try ease the reading..)
When I try to view a dynamic page in live view or in firefox I get the following error:
**when using:
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
result:
Access forbidden!
You don't have permission to access the requested object. It is either read-protected or not readable by the server.
If you think this is a server error, please contact the webmaster.
Error 403
thegoodlife
2009/10/13 12:47:48 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
*when using:
<VirtualHost *:80>
DocumentRoot c:/htdocs
ServerName localhost
</VirtualHost>
result:
Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
thegoodlife
2009/10/13 12:32:58 PM
Apache/2.2.12 (Win32) DAV/2 mod_ssl/2.2.12 OpenSSL/0.9.8k mod_autoindex_color PHP/5.3.0 mod_perl/2.0.4 Perl/v5.10.0
This is what I've done, blue indicating where I have or was meant to edit, red being the relivant context. (hope it helps )
1. Created a new folder called htdocs (C:\htdocs)
2. Changed the pathname to:
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/htdocs"
and
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/htdocs">
3. Created vhosts folder; with a sub-folder called thegoodlife (C:\vhosts)
4. entered new vhost:
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
127.0.0.1 dwcs4
127.0.0.1 thegoodlife
127.0.0.1 bin.errorprotector.com ## added by CiD
5.It says uncomment the command by removing the #, (Supplemental configuation.), but this is the origional file; already uncommented?
# Real-time info on requests and configuration
Include "conf/extra/httpd-info.conf"
# Virtual hosts
Include "conf/extra/httpd-vhosts.conf"
# Distributed authoring and versioning (WebDAV)
Include "conf/extra/httpd-dav.conf"
6.Set the permissions and changed the code as instructed, unsing (c:/xampp/htdocs) as advised.
# You may use the command line option '-S' to verify your virtual host
# configuration.
<Directory C:/vhosts>
Order Deny,Allow
Allow from all
</Directory>
# Use name-based virtual hosting.
##NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
<VirtualHost *:80>
DocumentRoot c:/xampp/htdocs
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/dwcs4
ServerName dwcs4
</VirtualHost>
<VirtualHost *:80>
DocumentRoot c:/vhosts/thegoodlife
ServerName thegoodlife
</VirtualHost>
Then creating the site definition:
local root forlder: C:\htdocs\thegoodlife\
testing server folder: C:\vhosts\thegoodlife\
URL prefix: http://thegoodlife/
hope i've covered all area's where I could have gone wrongJust one more thing - the description of what i did while first Kernel appeared:
Happened 2 days ago. Wasn't turning it off for like a day, only sleep mode by closing it. Worked fine all day, wasn't doing anything, except for checking mail 2-3 times and having windows 7 virtual machine opened but doing nothing, everything was going fine. Then closed it without turning off.
Opened 3-4 hours later, everything was working fine for 30 minutes of checking mail, then Kernel appeared. After that pretty much everything i did is described in part 1-5.
Note: all the time MBP was connected to internet via wifi, so updates to both MBP and virtual machine of all programs were possible.
I only shared downloads and desktop folders, so windows couldn't have access to system folder of Mac Os.
Hope this might help...Thanks again. -
I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!
Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams -
Windows Virtual PC and XP Mode refuses to start after update 25 February 2014
I have been using Virtual PC and XP Mode now successfully for more than 1 year. I am running Windows 7 Profession on a i7-2600 with 8 GB
But after the update on 25 February 2014 to both the XP Mode and Windows 7, my Virtual PC no longer works. It loops continuously and never starts.
Is anyone else having this problem? Are there any hot fixes? We have our accounting and address management system running in XP mode, so this is quite important to find a fast solution.
Thanks very much
DavidHi,
Rename the .vsv (virtual machine saved states) file in "C:\Users\[user id]\AppData\Local\Microsoft\Windows
Virtual PC\Virtual Machines",then start the VM again.
As a test, you can also uninstall the newly installed updates, check whether this issue is related with the updates. Generally, Windows Updates will not cause any issues, but if some software installed in your system conflicts with it or the updates
not installed correctly, it will cause some unexpected issues.
Regards
Yolanda Zhu
TechNet Community Support -
I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
but that these eventually got resolved in 2009.
The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture. Others have mentioned this problem over this past Summer 2012. The problem is that at the very last step of
the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series. However MSFT cautions that this problem requires further research. This was earlier
this Summer 2012.
My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows). The cpu architecture is both Intel, and with far more than the old standard of four cores. The XP Virtual Machine in Win7x64 will
not install, as described above.
I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture. However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
software that is critical to my PhD thesis. In need the XP Virtual Machine for this, and I have no idea how to get it. My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
Theory.
1011::1000I have news about this issue with XP Mode on Workstation machines. I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation.
In review, I purchased a Workstation computer for scientific computation purposes this past August 2012. My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode. My OEM shipped this
machine with Windows 7, but without XP Mode, and there is a reason why.
As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012. The reason is that most of the scientific computation and technical writing software that I use is written only for
Windows, and not for Server. Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
bays) and formatted for drives of at least 1TB in size. Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed. But this format excluded the possibility of
XP Mode.
So we changed the hard drive installation to something that I preferred. We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data. Most importantly, since this drive is less than 1TB,
we could use the MBR format which allows XP mode. Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST. This second drive is for unimportant data, and large files. For backup we chose a 2TB USB 3.0
external. In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
out quite well. It is very fast with my Intel 2x E5-2620 and maximum RAM.
1011::1000
1011::1000 -
What Virtual Characterstic and How to Create it.
Hi Experts,
My Requirment is to calculacte age based on DOB at run time.
One expert in this forum gave me an idea and required code how to achieve it.
Could you please specifie me on how to
1) Create Virtual Characterstic
And he asked me to in SMOD .....how can i do it...please explain me in a bit detail
ThanksHi,
Virtual key figures: Will not be stored in the cube. Will be computed at run time when he query is executed. The are virtual in nature and not physical. When you view the cube's contents in listcube, you will not see it there. This is not the same as calc key figures. example: to store sales in your cube and this has o be allocated to all the group companies with a business logic, in this scenario you can code the logic in an exit and derive these virtual key figures. Another example is, when you report on no of days outstanding of your debtors. This will vary depending on when you the run the report. So, a exit can be coded to compute this run time. This is classical example of virtual key figure.
Virtual characteristics: Same as above. Here you will derive the characteristics while report is run.
Depending on the requirements, you must decide when to code for a virtual kf or cha and when to store them in the cube physically.
Virtual characteristics and Key figures are useful if you want to dynamically pouplate data from the fact table to the field.
Virtual key figures are key figures within an InfoProvider that are not filled with data. Instead the key figure value is determined at runtime of the query using custom ABAP coding
Check "how to" doc for virtual characteristic/key figure details.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
Virtual key figures and charecteristcs are populated at query execution time.
These virtual objects should be included in the modelling level itself,so that it can be used in the query while using exit in that.
check this step by step doc:
https://websmp106.sap-ag.de/~sapdownload/011000358700009299362001E/HOWTOIDENTIFYCOMPRESULTS.DOC
Regards, -
Apache, name based virtual hosts and multiple servers.
Hi,
Ive been playing with Apache and name-based virtual hosts for a while now, but, ive been doing it with one single server... now i have the need to forward a name-based request to another server inside the intranet (wich doesnt have a public IP, but a private)...
Something like this:
internet -----> Webserver (name based vhosts) ----> intranet-webserver
Where "webserver" has several domains resolved via name based virtual hosting, and one of those needs to be redirected (or forwarded) to another server on the LAN.
Any ideas on how to do this? i tryed searching the web, but i dont know under which keywords, so i always end on single server virtual hosting help sites.
thanks in advance!you need to define a virtual server for it..but inside that definition.. define a proxy.
Then the middle webserver, will actually handle the request to the intranet server, on behalf of the internet client..and then pass the traffic to the internet client.
this looks like a reasonable example..
http://www.linuxfocus.org/English/March … le147.html
namely, the section "Mapping Virtual Servers" -
What dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.
what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.
what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.
-
Clustering Virtual Office and Netstorage Services in a DMZ
Gudday Guys,
We are relative novices with implementing Virtual Office and Netstorage
but we currently have it set up to front end our student storage system.
As the system will support 40,000 students, we are looking to move from a
single server implementation to a cluster with it running on at least two
servers to share the load. In addition, in order for students to access
their files from home, we intend deploying the cluster into the DMZ and
using SSL to connect from outside.
Before we set this up, I have a few questions. Firstly, can we set the
cluster up in its own tree so that its replication etc can be confined in
the DMZ or are we forced to set it up in our existing tree which is where
the users and storage reside? We could then pass the authentication
traffic through the conduits to our replica servers. If we can do this,
are there any special tricks/tips?
Any help or suggestions would be greatly appreciated. Thanks. Bill G.> We don't allow http access directly from the outside - PERIOD! That's a
> Policy.
no problaem, that's fine.
> We use iChain to front end some of our existing Webapps but we decided to
> do this slightly differently this time and host the webapp itself in the
> DMZ and the services behind the firewall. That way we can easily access it
> both from within and outside the district.
well.......
> I've opened conduits for Authentication to the other tree (Port 524 tcp
> and udp) and also SLP (Port 427 TCP and UDP). I'm having trouble getting
> access to the DAs in the other tree. Any Thoughts?
you need to open up more ports. The client uses a "high" port as the source
port and 427 as the destination port when talking SLP. The DA will respond
to the client's source port. The source port from the server will be 427 but
the destination port will not be. You will need to open ports from the
client to allow high ports. 1024 to <whatever> is the normal range.
<whatever> supposedly never goes over 1500 or so.
NETSTAT -A will show you what its using.
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS -
Virtual column and partition exchange load
Hi All,
Can someone tell me that if i have a virtual column on a table in 11g then can we load the data as partition exchange loading into the table.
Thanks & Regards,
Ankit RanaHemant K Chitale wrote:
Why not run a simple test with a dummy table, a few columns (plus a virtual column) and a few partitions ?
Excellent suggestion.
Shouldn't take more than about 30 minutes to create a test case - and if it takes more than 30 minutes the OP needs the practice anyway to get a better feel for the technology.
Hint to OP: make sure you put some data in the "incoming" table, make sure you put some data in the "non-exchanged" partitions, remember to include a unique/pk constraint if you're expecting one on production, and run with sql_trace enabled to see what's happening in the background.
Regards
Jonathan Lewis -
Can anyone tell me how Virtual Directory and CoreID play together? I heard that Virtual Directory was read-only. If that's the case, it doesn't seem like CoreID Identity can connect directly, cause it needs to be able to update. I currently have CoreID using ADAM as datastore. If I want to integrate other LDAP instances in the picture using Virtual Directory, what would be the scheme?
Thanks,
mikeHi Mike,
I haven't tired it, but I have defenitely heard about it.
This is a quote from the Oracle Website - " Oracle COREid also supports multi-directory and relational database integration via Oracle Virtual Directory.".
Also, a similar scenario is discussed here ( Slide 8 ) :-
http://conference.digitalidworld.com/2005/attendees/slides/Grand_0510_1600d.pdf
It would be good if Oracle publishes ( has published ? ) a WhitePaper about this....
Regards,
Sandeep -
Naming Presets for Virtual Copies and PS Edits
I'm new to Lightroom 4.1 and have been setting everything up... I'm having trouble with figuring out an efficient, clear naming system to distnguish Virtual Copies and Copies Edited in Photoshop. I tried using the "File Template Editor in the external Editing window... but I find it VERY confusing. Can anyone recommend a system and the way to enter it as a Preset in the File Template Editor.
My Image File Naming is as follows: KOBRIEN_YY_00001.dng
Thanks in advance for all suggestions!Best to set the Rename Template from within the 'External Editing' panel of Lr Preferences. The format should be along the lines shown in screenshot. You add the custom text after the template has been saved.
Above should work OK for photos edited in Photoshop, but Virtual Copies are a different beast and can't be renamed using templates. If you do try it the master is renamed, not the copy. The thing is, VCs must have the same base name as the master. However, you can manually edit the Copy Name field in Library Metadata panel.
Maybe you are looking for
-
HT204291 how do I watch a rented movie from my iPad 3 on the apple tv
plz answer
-
Hi All, Below is my signed SOAP request. I don't have any web.config configuration for this also no idea on how to implement message level security. Could you please suggest on implementation. <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.o
-
I have a MacBook Pro wirelessly connected to a Time Capsule. If during a file transfer, for example during a Time Machine backup, I make an Ethernet connection between them, will the transfer continue only over wireless or will it go over Ethernet? A
-
How can I code in Java the copying of a file from one directory to another. I am trying to copy a Database from one folder to another and I do not want to use streams because this will read in characters or bytes but the Database is made up of tables
-
Hi, Can any one provide me with the Siemens SD Training Documentation. I have the Siemens MM Documentation and more than willing to exchange that with SD. Thanks