Virtual PC and Citrix web access

Hello!
I have a PowerBook G4 running OS X Tiger. For work, I have to access my company's Citrix web site when I am not in the office physically so I can use some mainframe based applications. I'd prefer not to buy an additional PC laptop just for the web Citrix access.
I researched on the web and found that Virtual PC 7.0 for Windows XP Professional seems to be the solution, but I didn't find anything about using Virtual PC to access a web site that has the Citrix (I think it uses Metaframe) portal to launch company email, office apps, and mainframe access.
I have not purchase Virtual PC 7.0 yet - I am in my research stage where I'd like to know "what I am getting into". Requesting Citrix server IP address for a direct sign-on is not an option for me even if I use Virtual PC 7.0. Does anyone either have experience with similar Citrix access situations via Web or can anyone point me to some other resources website that may help me?
Thanks!
Angela

Hi Angela!
A Citrix client for Mac OS X is also available. Using this may be easier than trying to install and configure Virtual PC and then installing and configuring the Citrix client for Windows.
Your Citrix support folks should be able to tell you what settings you need to connect and log in but they may only support you as far as Windows. You'd need to use the admin guide (found at the same link above) to configure your Mac client.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.6)

Similar Messages

RD Gateway and RD Web Access - better together or on different servers?

I am evaluating Remote Desktop Services with 2012 R2 and initially I had all the roles on 1 server for testing. I began thinking it would be a better setup to split the RD Gateway role and the RD Webaccess role into different servers for security purposes.
This way I could expose only the RD Gateway to the internet and the Web Access role would not be exposed. In all my reading and searching it seems that nearly every article I come upon has both RD Gateway and Web Access installed on the same system.
What is the ideal setup from a security standpoint to have the these two roles separate or does it not mater? If it does not mater then I will setup 1 server with Gateway and Web Access and I will then have other servers for licensing, broker, session
host, and visualization host once I move this into production.
If these roles are on the same system how do I know if the gateway role is doing anything? Is the FQDN\rdweb the correct URL to use even when the gateway is implemented?
If they are separate how do I tell the gateway and web access servers to use each other?

Hi,
As far as I know, it’s fine to have RD Gateway and RD Web Access roles installed on the same server.
“Normally external users would log on to RD Web Access via tcp port 443, click on a RemoteApp and connect to RD Gateway via
tcp 443/udp 3391, RDG connects them to RDCB on tcp 3389 which redirects them to a RDSH server, finally the RDG connects to the RDSH on tcp 3389/udp 3389.”
Quoted from TP in this post below:
RD Gateway and RD web issue
https://social.technet.microsoft.com/Forums/windowsserver/en-US/5ab40559-23f7-4ebc-b60d-87375cc55674/rd-gateway-and-rd-web-issue?forum=winserverTS
More links below for you:
RD Gateway deployment in a perimeter network & Firewall rules
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
Remote Desktop Gateway/Web Server Placement
https://social.technet.microsoft.com/forums/windowsserver/en-US/b2970cf5-a5b5-494c-88b7-cd6e01f84bb6/remote-desktop-gatewayweb-server-placement
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Will notes in Mail sync with Notes on Exchange server and Outlook Web Access?

Will notes in Mail 5.0 sync with Notes in latest versions of Microsoft Exchange server and Outlook Web Access?

I was just trying to find the answer to this question myself.
As it happens it's all here in another post: https://discussions.apple.com/thread/3416007
Looks like Notes used to Sync in iOS4, but no longer sync in iOS5
Thanks
Mike

SharePoint 2013 (Foundation) and Outlook Web Access WebPart (OWAPart)

Hi, I've read most MSDN forum threads relating to this topic, however, I haven't seen my issue anywhere.
We're running SP 2013 foundation, and I want to use the Outlook Web Access web part. I followed the steps outlined here:
http://blogs.msdn.com/b/shawa/archive/2014/06/01/owa-web-part-in-sharepoint-2013.aspx
(Sorry, can't add link since I'm new around here)
To make the WebPart available in the site collection. Which worked.
When I try to actually add the WebPart to a page though, I get an error message stating: "There was an error adding the component to the page" (roughly translated from french).
If I try to see the web part properties from the site settings > Web Parts, I get a SharePoint error page, and the help link yields no information.
Most problems I've seen are with the actual configuration of the WebPart, but I can't even get to that step.

I dont think you can use Outlook web app for foundation. This is not possible because those Web parts use Microsoft.SharePoint.Portal.dll
which is not avaliable and registered on SharePoint Foundation.
Instead of using the OWA web parts, you could also try using the Page Viewer web part and set it to the OWA URLs...
If this helped you resolve your issue, please mark it Answered

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

Excel Services and Excel Web Access Web Part on O365 SharePoint...

I am using O365 E3 w/SharePoint and I have successfully created Pivot Charts via PowerPivot to query oData feeds from a couple of SharePoint lists. I was not able to refresh the data on O365 until I performed
this operation.
I updated the data connections in the report to refresh when the report is opened (which runs when the page with a referenced chart is accessed), but now there is a "Query and Refresh Data" warning that appears when the page is loaded; poor UX.
I have read that there is a way to turn off this warning in SharePoint on-prem, but that doesn't help me with this nagging dialog box. I tried to move the report to a BI site in the collection and changed the report to use data connection files in the Data
Collection Library hoping for enough trust for this message to cease, but ... No joy.
Is there anything That I can do to keep the refresh on page load and lose the warning on O365? Maybe there is a Javascsript workaround someone can help with (I'm not much of a JS Dev).

Hi,
According to your post, I have done a test in my SharePoint on-line and reappeared your issue.
If the issue occurred at SharePoint on- premise, go to SharePoint Central Administration > Application Management > Service Applications > Manage service applications > Excel Services
application > Trusted File Locations and click on the Address that contains the workbook. In the External Data section, under Warn on Refresh, uncheck Refresh warning enabled and click OK.
Refer to the following link:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/10/22/excel-services-query-warning.aspx
Unfortunately, the feature to disable the ‘Data Refresh Warning’ is not available yet in SharePoint Online.
Because the option needs the SharePoint Central Admin level permission that is not opened to the public in Office 365 now.
Refer to the following link:
http://community.office365.com/en-us/f/154/t/234874.aspx
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Missing values of Enterprise Custom Field in Project Professional and Project Web Access

Hi all,
In Project Server 2010 SP2 we created a custom field called Iteration Path (without a lookup table).
We're in an environment where Project Server task data gets synched from TFS and we've mapped the Iteration Path from TFS to the Enterprise Custom Field in Project Server.
We've triggered synch of all synchronized work items from TFS to Project Server
Then, in the database we can see the Iteration Path values coming across
When I open these projects in Project Profssional, the entire column of Iteration Path is empty.
When I open these projects in Project Web App (from Project Center), the entire column of Iteration Path is empty.
When I open the master project which contains all these projects, no values are shown.
Any ideas what can be wrong?
I did already clear my cache, global.mpt, but nothing changed. We don't have this issue with other Enterprise Custom Fields that are mapped to TFS fields.
Cheers,
Bram
www.projectexpert.nu

Hi Bram,
In the 4th item, when you say "database", which one are you talking about? Project Server DB? Draft or reporting DB?
If the value are not showing up in Project Pro, it is no need to clean your cache, since the value are obviously not stored in the Project Server Draft DB. The issue is more likely to come from the TFS sync for this particular field. Do you have any logs
for the sync process? If your field in anyway different from the others, containing specific characters?
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

RD Web access SSO - remote desktop doesn't work

Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
Pouyan

Thnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning.

RD Web Access SSO not working correctly

I have two Win 2008 r2 sp1 servers. Both are RD Session host servers. One of them is also serving as a RD Gateway server AND RD Web access server. Most everything is working well and as planned. However, I am having an issue with
the the RD Web Access.
In the RD Web access server configuration page, I've set "One or more RemoteApp sources" and I've added two servers there, separated by a semicolon (eg RDServer1;RDServer2), and as expected a long list of RemoteApps hosted on both servers is shown . The
issue is that whatever server is listed second (eg RDServer2) won't allow sso to work right -- when I click a link for a RemoteApp hosted on RDServer1 I am not prompted again for login credentials. However, when clicking a link for a RemoteApp
hosted on RDServer2 I am prompted "Enter Your Credentials". I've tried swapping the order of the "Source Name" servers, and after a reboot indeed links to the RemoteApps hosted on that second server now prompt for me to "Enter your credentials".
Things I've tried:
1. Trying various server name formats (IP address, NetBIOS name, FQDN, and more) to no apparent effect.
2. Applied the hotfix from KB2524668 to both servers.
3. Flushed the IE caches for the client machines.
4. Tried various AD login accounts
5. Ensuring that the RD Web Access server is added to the local group "TS Web Access Computers" on both servers.
This is one step that I'm not 100% sure of -- it is clear to me that the RD Session host server that doesn't contain RD Web access should be there, but I'm not totally clear as to whether the dual-duty RD Web server/RD Session host should have this setting.
I've tried it both ways, but it doesn't seem to make a difference.
I'm stumped.

Kevin,
That's it! I have a separate SSL cert for each RD Session Host, and used the corresponding certs to sign RemoteApps for each. I still don't see this requirement in the documentation (although they do mention exporting self-signed certs, but that
is due to the fact that they are self-signed and not automatically trusted by client machines), but maybe I'm just blind.
Regardless, the fix to my problem was to export the cert from my RDServer1, import it to RDServer2, then set RDServer2 to use that cert to sign the RemoteApp connections.
Thanks for your assistance, I was really stuck.
Chris

Primavera p6- timesheet & web access

hi
i want to ask question about primavera professional project management
can i access timesheet and p6 web module
if yes - How
if No- what i need to use timesheet and p6 web access
regards
Alaa

Hi Alaa,
Sounds like you need to be in the 'Primavera P6 Enterprise Project Portfolio Management' forum... this is for the old Product name Prosight not P6.
From my understanding, Oracle Primavera PPM provides and 'Enterprise' version (which includes the Web services and Timesheets) and a 'Professional' version that provides upto 100,000 activites in each project, with not web services or timesheet tools, this may have been what you have purchased/recieved/installed.
Best you check with your sales contact and confirm with them that you need the Enterprise version.
Or if you have the enterprise version, you can download the required tools from the Orcle website.
Regards,
James

Web Access Has "Stopped"

I have a simple home G5 setup -- Road Runner cable access going through simple router. Seems that after the last OSX update my web access began deteriorating. Time Warner replaced the cable modem but it hasn't helped. Today it takes several minutes to access a web page or a new link -- often the request times out and I can't connect at all. Get the "Can't open the page" message. This is true with all major browsers -- sometimes Eudora can't retrieve email either.
I've read every post relating to this or similar issues and have tried trashing various prefs, making sure no Proxies are checked, etc., all to no avail.
This started about 10 days ago and has deteriorated to barely being able to connect to the Internet at all (it took many tries even to get to this support forum).
Can anyone help? Thanks for any advice.
I had made no changes to my computer before this started happening

My thanks to you and BDAqua for help with this issue, now resolved. I got educated on the OpenDNS system and now understand the use of those two DNS Server numbers in my Network control panel. I also was able, with the help of the OpenDNS web site and D-Link tech support, to get my router reconfigured using the OpenDNS numbers, and my web access has never been faster.
All that's left is to wonder why my DNS resolution got messed up in the first place. It appears to me that Time Warner's (Road Runner) system of providing dynamic DNS resolution is "bad" -- nowhere as fast as the OpenDNS system.
Anyway, for other Road Runner customers who read this thread and want to try to OpenDNS server IP addresses in your Network preferences panel, go to opendns.com -- very simple, clear web site explaining how to configure your Network panel and a wide variety of routers.

WVC54GCA Web Access Failure

First of all I would like to say hello, this being my first post here.
Today I bought my first Linksys Camera and it works flawless on my LAN but I don't know how to access it from outside the network(web access).
My camera is connected through a D-Link DIR-600 Router and my ISP is using a dynamic IP address.
I forwarded port 1234 for my Linksys camera local IP and changed "Web Access" Port from camera setup to 1234.
My question is if I know my IP how do I connect to the camera and how do I let other people see it? For example let's say my IP is 123.123.123.123 should I use http://123.123.123.123:1234 to see the camera?

Since you have a dynamic IP, it's highly recommended that you get a DDNS service such as TZO to keep a domain name on the cam instead of relying on an IP.
If you just want to use the IP, you first need to open port 1234 and then use the WAN IP and Port as shown, http://123.123.123.123:1234 should work as long as port 1234 is open to the STATIC LAN IP of the camera.
good luck
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

Outlook web access problem

Hi,
At work we recently were asked to give email addresses so that work emails could be accessed at home via the internet and outlook web access.
The problem I am having is that keychain access does not seem to be able to remember the password, and keeps asking for it over and over again during the session, despite my checking the "remember this password in my keychain" box. . Keychain access works fine for other sites; I did keychain first aid, and deleted all the keychains and started over; didn't help.
thanks-

Hi ..
MIght be a cookies, cache, or extensions proble.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Windows 7, Firefox and Citrix Access Gateway

Hello
I have a PC with Windows 7 Professional (32 bit).
I have web access to a Citrix Access Gateway, and it works mostly fine in IE9. But when I try to access via Firefox 9.0.1 the CAG writes that no Citrix client is installed. If I click Already installed, I can move forward, but then there's a box up asking if I want to open or save Launch.ICA when I try to open a program. Whatever I choose, it will not work.
I have a desktop PC with Windows 7 Home Premium and there are no problems even in Firefox 9.0.1. Same version of Citrix Web plugin installed on both PCs and UAC is completely turned off on both.
If there are more security options than in the Professional Premium - So is there anything I can try to disable the Professional?
I can not immediately see that I can do so much in Firefox.
sincerely
Martin

I tried to install the extension IE Tab 2 in Firefox.
It seems to have solved the problem.

Virtual PC and Citrix web access

Similar Messages

Maybe you are looking for