Virtual pc and virtual network not starting!

Hi
Just installed Virtual pc and WIndows xp
When I reboot my mac mini, and start up Virtual PC it says that it cannot start Virtual Network. So then I cant connect to the internett.
Is there a workaround to make it work?
The message says that I should go to Microsoft site and the code is A1004. It also say that I should restart mac and then start up Virtual PC... then it will work. But it does not!

Here is the message I first got when I tried to start up Virtual PC.
http://homepage.mac.com/baiaz/virtualpc.jpg
In a Norwegian Forum for mac, somebody said that I should upgrade Virtual PC 7 to Version 7.0.2.
I just did and now I dont get this message but still I cant get into internett. any solutions?

Similar Messages

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Can not update tiger and safari does not start

Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
Crobus

Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe

Hello i have reset my iphone 4 .3.3 and till now not start again i have the apple on the screen and nothing else what i want to do thank you

Hello i have reset my iphone 4 .3.3 and till now not start again i have the apple on the screen and nothing else what i want to do thank you

Try resetting the device by pressing the Home and Sleep/Wake button for several seconds, the device should then boot up.

SRM AS JAVA not starting(JControl.EXE and Server0 are not starting )

Hi All,
We have SAP SRM 7.0 AS ABAP and AS JAVA with SAP PI and MDM installed on Windows Server 2008 R2.
When we are trying to start SRM as JAVA from SAPMMC is not starting.
The JControl.EXE and Server0 are not starting.
For your convenience I am pasting error part of trace files
Our dev_jcontrol log file text is as follows:
[Thr 7112] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 7112] [Node: bootstrap] java home is set by profile parameter
[Thr 7112]      Java Home: C:\j2sdk1.4.2_19-x64
[Thr 7112] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
[Thr 7112] JControlICheckProcessList: process server0 started (PID:4688)
[Thr 7112] Thu Dec 15 16:43:42 2011
[Thr 7112] JControlICheckProcessList: process server0 (pid:4688) died (RUN-FLAG)
[Thr 7112] JControlIResetProcess: reset process server0
[Thr 7112] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 7112] JControlICheckProcessList: running flight recorder:
[Thr 7112]      C:\j2sdk1.4.2_19-x64\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID228052750 1323947582 -bz E:\usr\sap\SRJ\SYS\global
[Thr 5568] Thu Dec 15 17:23:18 2011
[Thr 5568] JControlSigInt: signal = 2
[Thr 5568] JControlIStopInstance: shutting down (command: 0)
[Thr 5568] JControlIProcessSoftKill: soft kill of process dispatcher (pid:7648)
[Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
[Thr 5568] ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
[Thr 5568] JControlIProcessSoftKill: soft kill of process SDM (pid:7664)
[Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
[Thr 5568] ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
Our dev_bootstrap log is:
[Thr 7712] CCMS: AlMsUpload called by wp 1004.
[Thr 7712] CCMS: AlMsUpload successful for E:\usr\sap\SRJ\JC22\log\ALMTTREE.DAT (302 MTEs).
[Thr 7712] CCMS: CCMS Monitoring Initialization finished, rc=0.
[Thr 7712] [Node: bootstrap] java home is set by profile parameter
[Thr 7712]      Java Home: C:\j2sdk1.4.2_19-x64
[Thr 7712] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
In dev_server0 the log is as follows:
ERROR => The Java VM terminated with a non-zero exit code.
What should be the issue I am not getting. Please help me to solve this.
Thanks & Regards,
Ishan

Hi All,
I removed last changes i did. n restarted it.
Thanks,
Ishan

Dispacher and server0 is not started during NW2004s installation

Hi,
Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
(22503) Starting local Command:
Command: en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
listen failed on port/service sapdp33
initialize_global: another instance of the enque server seems to be running. EXIT
***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [10.223.50.15] spdeai01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1]   3 : [10.223.50.215] 10.223.50.215 (NILIST)
[Thr 1]   4 : [10.223.50.115] 10.223.50.115 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = spdeai01
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to internal port 3933 (3933) ***
[Thr 1] *** HTTP port 8133 state LISTEN ***
[Thr 1] CUSTOMER KEY: >Q0820898445<
[Thr 1] Wed Oct 24 18:28:11 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
[Thr 1] Wed Oct 24 18:28:21 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
Our JDK version is '1.4.2_11' and We are installing on the HA environment.
How can I solve this problem? or What should I check about it?
Best Regards,
David.

Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
VJ

I have installed LR 6 for windows (win7) and LR will not start but hangs up

I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
Thank you. Leo

hbereth,,
It is Ideal to install Creative Cloud app , if you are using Adobe apps.
Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only.

I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

i have not used ipad from last 1 year and now its not starting any suggestion how to start,

Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
Then try to turn it on.

HT1349 Have gone to sync Itunes and program does not start up. Have uninstalled and reinstalled and still nothing. Very frustrating as it has 6 devices I maintain.

Have gone to update and sync Iphones and Ipods and Itunes does not start up.

Both the sccbase.dll and slbcsp.dll failed giving the error "LoadLibrary("xxxxxx.dll") failed. - The specified module could not be found."
There's our likely culprits. We'd better try swapping them out on the PC.
(The instructions I'm about to give are quite possibly going to sound odd ... I'll explain what we're doing and why at the end of the post.)
Navigate to the C:\Windows\System32\ directory. (If you've set a different directory from \Windows\ as your Systemroot, look for \System32\in the alternate Systemroot rather than Windows.)
Can you see sccbase.dll and slbcsp.dll in there?
If so, drag each of them to your Desktop.
Now close the C:\Windows\System32\ window, wait about 5 seconds, and then open navigate to C:\Windows\System32\ again. Have copies of sccbase.dll and slbcsp.dll reappeared in that directory?
If one or both of the dlls aren't replaced and/or you get an error message from Windows saying you have a system file missing, move the dlls back into \System32\ from your desktop, and post back.
(What we're doing here is using XP's Windows File Protection system. It maintains a \dllcache where copies of essential dlls are kept on the PC. If it detects that a dll from \System32\ is missing, or has been replaced by an earlier version, and it has a current version of the dll in the dllcache, it will move a copy of the correct version of the dll into \System32\. There's more information about this in the following document from Microsoft: Description of the Windows File Protection feature.)
If the dlls are replaced, try restarting the PC and then relaunching iTunes again. Does it launch this time?
If it doesn't launch, try reregistering sccbase.dll and slbscp.dll again. Do they reregister properly, or do you get an error message again?

I am trying to start a movie and it will not start. The message is "an error occurred in loading this content". Has anyone had this problem before?

I am trying to start a movie and it will not start. The message is, "an error occurred loading this content". Has anyone had this message before? Any solution?

Hi there TonyCashio,
You may find the troubleshooting steps in the article below helpful.
Apple TV (2nd and 3rd generation): Troubleshooting playback performance
http://support.apple.com/kb/TS3623
-Griff W.

I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

I broke my ipod 5 generation ipod and had some pretty important notes on there and it will not start again. I also have an ipod 4th generation and I was wondering if you could use icloud or something to restore my notes on to this ipod. Any ideas?

If you had been syncing notes on your iPod with iCloud before this happened, go to icloud.com and confirm that your notes are still there. If they are, you could either email them to yourself one at a time from icloud.com or you could sign into your icloud account on your other iPad in Settings>iCloud and turn Notes to On to sync them to your other iPod.

I updated my iphone 4 to ios 6.1.3 and it does not start now

i updated my iphone 4 to ios 6.1.3 and it does not start now

That message usually means you hacked the phone to unlock it.
When you updated your IOS it locked back up to the original phone carrier.
Only the carrier that the phone is locked to is authorized to unlock it.
Is this the case?

Updated to 4.01 and it would not start, removed and loaded 3.6 with no problems ??? running XP SP2

Have been using ver.3.6 for months and have not had any problems, tried to update to 4.01 and it would not "start", even after re-starting the pc. Removed and reloaded ver.3.6 and no further problems.
System is a XP SP2 ???
Are there any issues with ver 4.01 on XP

No, there are no issues running FF4x on Windows XP. I have that OS installed myself.
You appear to have McAfee Site Advisor installed. Versions prior to 3.3.1 are incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
See also: http://kb.mozillazine.org/Problematic_extensions
Disable McAfee Site Advisor in Tools | Add-ons | Extensions and then update Firefox again via '''Help '''| '''Check For Updates'''.

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

I updated my iphone 4s, my imessage and facetime will not start, and will not accept my CORRECT apple id password.. Any updates on this problem??

I updated my iphone 4s, my imessage and facetime will not start, and will not accept my CORRECT apple id password.. Any updates on this problem??

same with me...my imessages do not work and my freakin facebook app disappeared and won't let me install...never had a prob. until today...***

Virtual pc and virtual network not starting!

Similar Messages

Maybe you are looking for