Virtual PC on Windows 7 (32 bit) and T4300 processor

Hi,
I bought my laptop specifically to run Virtual PC and deliberately got a 4Gb machine. I now find out that the T4300 processor doesn't support hardware assisted virtualisation and seemingly you then can't run VPC? I'm not interested in XP mode - I need to run a Windows Server environment.
Does anyone else have the same problem and have an answer. Anyone from Tosh know if I can get around this at all.
Peter Clements
Dynamicsbase.Com

Hi
Have you checked the Intel page?
According the specification you cant use Virtualization:
http://ark.intel.com/Product.aspx?id=37253

Similar Messages

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

Hi Friends,
Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
Windows (64 bit) and Linux x86 (64 bit)
Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
so will it mean that the same dump is used for both 32 and 64 bit
1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
can the above dump is used for both 32 and 64 bit windows?
2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
can the above dump is used for both 32 and 64 bit Linux?
The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
Please confirm .
Regards,
DB

It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
Edited by: user12838563 on Jul 13, 2011 11:35 PM

Is iTunes 10.5 beta available for windows 32 bit and where is it found?

New to the developers site. Can someone tell me if iTunes 10.5 beta is available for Windows (32 Bit) and where it can be found for download? Thanks.

You're out in the public forums here, bryan. Best not to ask questions like that here ... it's a breach of your NDA. Try the developer forums instead?
http://developer.apple.com/devforums/

PI 7.0/7.1 Installation on Windows 64-bit and MaxDB

Hi Folks,
We have an installed PI in one server on Windows 2003 using Oracle DB (licensed).
We wish to install PI in another server on Windows 2003 64-bit but this time it will be MaxDB.
I've tried searching and found SAP NetWeaver Process Integration 7.1 on Windows_Oracle.pdf.
Any advise please on how to go about installing PI 7.0/7.1 on Windows 64-bit:MaxDB. Thank you!
Regards,
Lex

Hi Lex,
you cannot use the SAP DB (=old name of SAP MaxDB) package you found on the old SAP DB site for your PI installation for various reasons:
a) SAP DB version 7.4 is VERY old, it is no longer supported since the end of 2006 !
b) typically, a SAP application and its DBMS are installed using SAPinst
Try checking the SAP Software Distribution Center (incl. PAM: Product Availability Matrix) on the SAP Support Portal. You can also get the correct software there (when you're an official SAP customer).
Regards,
Roland

Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
Windows Phone Emulator is unable to verify that the virtual machine is running:
Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

No you cannot do that. You need a physical machine that supports Hyper-V
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Installed windows 32 bit and 64 on same computer

windows 7 premium and 7 2010 pro plus / 32/64 bit activated installed on same Comp.
This question was solved.
View Solution.

Hi,
You must uninstall 32 bit version before you can install 64 bit version. Your machine MUST run 64 bit Operating system. Please also consider this:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/need-to-uninstall-ms-offi...
and this:
http://technet.microsoft.com/en-us/library/ee681792.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 32 bit and solaris 64 bit

i am configuring a rman repository database in win2k server(oracle 9i 32 bit).The target
database is on solaris 9(64 bit).Wheter is there any conflict or problems between these 32
bit(rman repository) and 64 bit(Target database).
with regards
ramya

Don't worry about this. The repository database holds only metadata about the target database, but no real data (from the target) itself.

Unable to download oracle 10g release 2 for windows 32 bit and linux

unable to download the oracle 10g for windows and linux from the website given below. http://www.oracle.com/technology/software/products/database/oracle10g/index.html
can any one help me out ?

From that site, you need to click on a link and answer the questions on the next page. Click 'I agree' and, on the following page, you select the download you need.
If that doesn;t work, you may need to review user settings, security, and knowledge base for your browser.

Odd incompatibility between 10g2 for windows 32-bit and Linux 64-bit

Hi.
When we run the following SQL under windows, it works as expected.
drop table TRANS;
drop table TRANS_PAT_LEVEL;
drop table TRANS_DAY_LEVEL;
create table TEST1.TRANS (ID NUMBER(22), QTYDISPENSED NUMBER(22), TRANSACTIONDATEDIFF NUMBER(22),FMYPRODUCT NUMBER(22));
create table TEST1.TRANS_PAT_LEVEL (ID NUMBER(22), FMYPRODUCT NUMBER(22), LASTMYPRODUCTUSE NUMBER(22),ELIGIBLERET NUMBER(22));
create table TEST1.TRANS_DAY_LEVEL (DAYID NUMBER(22) not null, UNITS NUMBER(22));
UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365;
But when we run it under Linux (Redhat 4.3 x86_64) , we see the following error with the last command:
SQL> UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365
ERROR at line 1:
ORA-00904: "DAYID": invalid identifier
We have also seen an incompatibility regarding case sensitive column names being created by the JDBC under linux, where under windows the same tables all have case-insensitive column names.
Any help here?

Hi,
exception is expected behavior since inline views [can not be correlated|http://forums.oracle.com/forums/thread.jspa?messageID=3403285&#3403285] in Oracle (yet). Successful execution of such query means a bug in that Oracle release.

Oracle 11.2.0.4 clinet on Windows 32 bit and Windos 64 bit

I see on technet.oracle.com Oracle 11.2.0.1 clinest avaiable. How do I update to Oracle 11.2.0.4.
Is there a patchset to upgrade to Oracle 11.2.0.4 (is patch same for client and server).
Apprecaite any insight

Patches are available on My Oracle Support - access to which requires a paid support contract
See MOS Doc 1562139.1 - check the README of the patch

Leopard, 64 bit and G5-processors

I have noticed that when promoting Leopard, Apple has among other things often pointed out Leopards support for 64-bit applications.
However, when writing/promoting it, Apple mentions it is an advantage when you have Intel Core2Duo processors. But what about G5-processors? - they also have 64-bit architecture and when launched a few years ago, it was one of their (and Apples) strengths over Intel.
Does Apples lack of mentioning the G5-processor`s 64-bit architecture mean that Leopard is coded so that it supports only the 64-bit architecture of Intel?
All the best,
Espen

Thanks, Niel
I thought it did, although beginning to wonder a little, and I am glad you could confirm it.
All the best,
Espen

Windows 7 64-bit and 4gb ram on S10-3T

Can I upgrade my S10-3T to Windows 64-bit and install a 4gb stick of ram? I found a couple of sticks with matching specs on amazon.
Also will the processor bottleneck the 4gb ram/ is it even worth it?
I have the N470 BTW

It means windows 7 64 bit won't work with S10-3T, same with the 4G RAM since its maximum is only 2GB

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

SAPBobsCOM.dll and windows 64 bits

When i try to connect to sap using di api, i have a exception:
Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F62007} failed due to the following error: 80040154
I have a web service on windows 64 bits and I have reinstalled di api

Hello
When you compile your application, you must use x86 type as target CPU. reason: B1 and SDK components are running in 32 bit mode under x64 machines. x64 application cannot communicate x86 applications in .COM components. Your addon is compiled to x64, and the DI API is x86 compiled.
This is the reason why you receice error message,
Also nice, if you give the directirve Win32 = True to the compiler when you build you appliaction.
Regards
János

Virtual PC on Windows 7 (32 bit) and T4300 processor

Similar Messages

Maybe you are looking for