Virtual PC v 6.10 and the Belkin USB Serial Adapter F5U103

Trying to run Virtual PC v6.10 on a G4 with OS 10.4.10.using Windows XP.
When booted up in OS 9 my Belkin USB Serial Adapter F5U103 is recognized along with the hardware connected to it. Not so when booted up in OS X. Will purchasing a new Mac that can boot up in Windows XP possibly have the same issue (i.e. not recognizing the Belkin USB Serial Adapter F5U103)?

I'm running Virtual PC v 6.10 because I only need it for one application that I run at most once every two weeks. Do you think v. 7 will allow me to use the Belkin USB Serial Adapter F5U103 on OS X?

Similar Messages

  • Mac OS 10.5.5 and Belkin USB Bluetooth Adapter

    I upgraded to Mac OS 10.5.5. this morning and upon restart I lost the ability to turn on Bluetooth (Belkin USB bluetooth adapter). The adapter is visible to the computer, but it can no longer be turned on so I can benefit from its use. I checked Belkin's site -- no upgrade there. I believe it is an OS 10.5.5. issue since it worked before the upgrade. I have tried looking at Bluetooth preferences -- the option to turn on is "greyed" out. File Sharing, Network, and Security system preferences were of no help. Anyone have any ideas.
    Thanks,
    Doug

    Hi there,
    Did you ever resolve this problem, because I am having exactly the same problem with my Intel iMac running 10.5.5 and Belkin F8T012 USB Bluetooth.
    I too have found that using "Bluetooth file exchange" seems to turn on Bluetooth, so thanks for that advice, but it's hardly acceptable is it?
    I can plug the same USB into my laptop (running 10.4) and it turns on perfectly!

  • G4 Won't Boot after Tiger install and Belkin USB Network Adapter install.

    I'm sure this would apply to my G5 as well.
    I installed Tiger on my G4 and it restarted and opened to desktop. Great!
    Next, installed software drivers from Belkin USB Network Adapter.
    Restarted computer,
    Screen has firmware 'like" look asking me to type mac_boot.
    I do this and the next screen is all grey with two small purple folders in the corner. I believe one was flashing!
    Nothing happens just stays there.
    How can I get back to normal boot mode?

    tigerswim, welcome to Apple Discussions.
    Did you already have Tiger installed or did you have Panther 10.3 installed? Tiger is not a free upgrade; you have to buy it & then update (for free) using the download updates from Apple. Also, you have to use a universal/retail install DVD (or CDs) to install Tiger. You cannot use the install DVD from another model Mac.

  • CS3 asked serial number suddenly and the box-set serial number not work.

    CS3 asked serial number suddenly, and the box-set serial number not work.

    Elton Adobe which web browser are you utilizing?  Are you signed into http://www.adobe.com/ when you attempt to contact our support team directly at Contact Customer Care.
    I would recommend utilizing a different web browser and contacting our support team directly as suggested by KGlad in message #6.

  • Create the second copy, delete and the first copy serial (Archive Deletion)

    Hi Experts,
    I am new to DB2 and i want to enable "-cds" Option (Create the second copy, delete and the first copy serial) while performing online backups. Though this option is available in "Oracle" and we can schedule the same in DB13 itself.
    If you can please guide to enable this feature in DB2 via DB13 ?
    Regards,
    JAI

    Hello JAI,
    which tool you´re using to create the online backups?
    The command to prune could be as followed:
    db2 prune history  and delete
    It will be helpful if you monitor your db2diag.log during this to see whats happened.
    Regards
    Olaf

  • USB data link to Belkin USB Printer Adapter

    I am using a T6295ZM/A DLINK BLUETOOTH MODULE DB connecting to a Epson R200 prinmter through a Belkin USB Printer Adapter. Printer error messge Paraphrased "can't communicate with printer."
    Using Bluetooth pane in preferences I can see the adapter and the blue LED is flashing. When message is displayed "Geting additional information from printer" it just freeezes. There is no query for paring. Any help will be appreciated.
    1 mini-tower G5, 3 G4s 1 mini-tower 2 notebooks   Mac OS X (10.4.3)  

    Sems like someone should know answer to this question

  • Does the Apple USB Ethernet Adapter work with a MacBook Air that's been updated to Lion?

    I saw a comment at the online Apple store that the USB Ethernet Adapter didn't work with Lion. Anyone else have experience with the adapter?

    Just point the tech rep to the apple website that lists the Ethernet to USB system requirements as:
    "Overview
    The Apple USB Ethernet Adapter is a simple, one-piece external adapter that plugs into the USB 2.0 port of your MacBook Air to provide 10/100BASE-T performance. Simply plug your Ethernet cable into the RJ-45 connector — no external power is required. It’s small, light, easy to install, and even easier to use.
    Technical Details
         USB 2.0 with bus power
         10/100BASE-T (RJ-45 connector)
    What's in the Box
         Apple USB Ethernet Adapter with built-in 4.6-inch USB cable
    User's Guide
    System Requirements
         MacBook Air computer with available USB 2.0 port"
    Note that there is no mention of a specific OS requirement.......Cut and pasted from apple.com.

  • Can I charge an iPod Classic 3G with the Apple USB power adapter?

    I have just buy an iPod Classic 3G with 15  GB (SN JQ4239GQQQF) from ebay.
    I have read that it's posible to sync it with my PC with Windows 7, but, It is not possible
    to charge it by usb.
    I could charge it with the Apple USB power adapter?
    Thanks

    With that particular model, only the Firewire cable and connection will provide power to the device.  The USB cable is only for syncing.
    Using the iPod Dock Connector to FireWire and USB 2.0 Cable
    Here is the cable you'll need.
    http://www.amazon.com/Apple-Connector-FireWire-Cable-White/dp/B00009KO0B
    And the wall adapter as well.
    http://www.amazon.com/Apple-FireWire-Power-Adapter-White/dp/B0000D8LSW
    B-rock

  • HT4341 Can I use the 5w usb power adapter for iPad mini/ iPhone 4 in 220v with an adapter?

    I will be traveling to Peru and have an adapter for the different prongs there, can I use the 5w usb power adapter that came with my iPad mini, or do I need to buy a converter as well for t their 220v?

    The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

  • Creative zen v plus and the belkin char

    We discovered something that maybe is so obvious to everyone else but maybe not... we bought the belkin charger that works with our zen v plus. HOWEVER please note the usb cables that come with it and then with the zen v plus are NOT interchangeable. We at first assumed the only difference was the belkin cord was longer but the shorter cable that came with our zen v plus does NOT work with the wall charger. It made our zen lights blink on and off and go wierd and not charge at all but thankfully did not damage our player WHEW!

    If the purchases you are talking about are DRM-protected files, which is mostly what the iTunes Store sells, they are not compatible with players other than iPod.
    All you can do with them is use iTunes to burn them to an *audio CD.* Think how handy it would be to have them on an *audio CD.*
    Going forward, do not spend your hard earned money on songs with proprietary DRM protection. There are other online stores, such as amazon.com, that sell the same songs in non-DRM format, which will be compatible with iPod, Zen, or virtually any other player.

  • Is the Belkin universal mic adapter compatible with shuffle iPod?

    I'm buying a Belkin universal microphone adapter for my sons shuffle iPod 30GB so he can do memo's on it for his songwriting ideas he has, doesn't have the time to sit and write them down, so I being a songwriter also am trying to come up with ideas for him take verbal memos on his iPod as opposed to having to purchase a digital recorder. Any support would be very helpful, thanks much in advance, Michael http://www.michaelthehookdeutsch.com go hear check out my short documentary, you'll dig it! purchase some cd's while your there, pass link on
    imac 17", powerbook G4 17", Quest 250GB external, Lacie d2 Triple 320GB external   Mac OS X (10.4.10) both mac superdrives - Pro Tools and Sound Studio apps.

    thanks ya'll helpful site again. the Hook plays a mean piano

  • Want to buy IPOD for G4 using Panther and the older USB port

    I want to buy a used IPOD. I have the 800 megahertz G4 with Panther 10.39 and I guess that older USB port. I hear is isn't USB 2.0. Which Ipod should I buy that will work?
    I want an ipod but I don't want to buy a brand new computer for a few months!
    Thank you very kindly,
    Tom in Arizona

    Thanks very much. The only one that seems to be a good match is Ipod Shuffle. There remains, however, one problem. Its corresponding version of Itunes is 4.7.1, and I have 7.4.2. Is it possible to get version 4.7.1 and repopulate it with my songs so that I can use Ipod Shuffle? This would appear to be a real problem.
    Gracias,
    Tomás
    PS: I'm assuming this old macitosh does not have the version 2 USB port. Here's what my system profile lists:
    USB Bus:
    Vendor Name: Apple Computer, Inc.
    Product ID: 32773 ($8005)
    Speed: Up to 12 Mb/sec
    Bus Power (mA): 500

  • What is the capture  range of the snowball and the nessi usb mic ?

    anyone knows the max range to capture voice with these usb mic, or any other.  it is to records Church Sunday's messages, my audi booth is at the far back of the church. it would be so much easier if apple would equip their product with an audio in, then i would just need a audio cable from the comptuter to the sound console, but they don't so i need another solution.
    i would welcome other not too expensive solution
    thanks
    Rob Mongeau

    It depends on the quality you need. The iMic would give you about the same quality as the built-in audio input of an earlier Mac. If you want a more professional quality input, or something with a more rugged jack than the 3.5mm jack in the iMic, something like the Lexicon Alpha or M-Audio M-Track might be worth looking at. There are higher-end devices available, but those might be overkill for capturing chuch services.
    Regards.

  • Which is the best USB Wireless Adapter for a MacBook?

    I have a MacBook Pro 13" (Late 2011), nowadays I have a lot of problems with the Wi-Fi connection in my University (translated):
    PHY mode: 802.11n
      Channel: 1
      Country code: MX
      Network type: Infrastructure
      Security: WPA2 Enterprise
      Signal/Noise: -59 dBm / -86 dBm
      Transmission speed: 52
      MCS index: 5
    I am not the only one with this problem, almost every Mac and computer has the same problem, the question is "What is the best Wi-Fi USB adapter I can buy to improve my connection?". I know there are a lot of answers to this question the problem is many of them are very outdated.
    Finally, the problem only happens with this network, my home connection. Some people using PC's have bought Wi-Fi USB adapters and their connection improves a lot.
    Thank you.

    Give the Edimax EW-7811Un a try. I am curious if it solves your wifi problems!

  • Airport Extreme, Belkin USB Hub, and external hard drive

    I'm having a serious meltdown. I've been at this all day long and I've reviewed SEVERAL, if not all, discussion threads. I've seen my question many times on many threads, but yet to find a solution!
    Just got the hub, and I tried today to connect the Belkin USB hub so I could get my external hard drive accessible from my Mac. My external drive worked fine on my PC. I recently moved to Mac.
    Printer works with no issue at all, but my external drive does not even list in either the Disk Utility or System Profiler. It just doesn't get recognized. I've tried EVERYTHING...switching ports, connecting directly to my Macbook, restarting, etc., etc., etc. NOTHING.
    Anyone have any insight to this? I'm ready to throw in the towel.

    Ok I'll try that! Uh oh...now I can't even see the external drive on my PC! I also spent some time looking at the manufacturer's website to see if there's any software I may have downloaded before using the hard drive, but the website is not helpful in that capacity (www.cavalrystorage.com). I don't remember having software when I first started using it. Furthermore, I just looked at paperwork I received when I got the drive back in Nov.06 and it says not to use "the CD if you have Windows", (to install a driver, perhaps?) which of course, I did. But now I can't find what disc I may have gotten with the drive. It also had no specific instructions for a Mac. Although the external drive has wonderful reviews, and says you can use it with a PC or Mac. I hope this helps. I certainly appreciate your help!
    I'm starting to think something has gone awry with the external hard drive? I've tried connecting through the hub (my printer works at least!), direct to AirPort, and direct to laptop and nothing.

Maybe you are looking for

  • Sound Blaster Audigy 2 to

    Hi. Can some one help me? Is it possible to record music on to Minidisk player using digital out of my SB Audigy 2 and digital in of my Sony MD. I get no digital output from sound card. Is there some settings that I need to change?

  • Unable to create OLAP Metadata catalog in EIS

    We are planning on creating new Essbase apps using EIS to create and load from our relational data warehouse databases. Have worked with Essbase for many years, but never EIS. We are currently on 9.3.3 for all Hyperion apps. I successfully installed

  • EJB - inbound and outbound proxy

    I have implemented inbound and outbound proxy to transfer file. In proxyFTPClientREQIB method of ProxyFTPClientREQIB_PortTypeImpl class I want to invoke outbound proxy that sends structure to XI. I have a problem with context, because after invoking

  • N85 lght up problem

    hello....i just bought a n85 orange france with sw version 10.045 ..im happy with my new nokia mobile but i have a small problem.... ....when i talk and i slide up ( open the keypad ) the keypad doesnt light up...any idea to fix this ? ...i would lik

  • Targeting all objects down the group structure

    Hi all. I have a tree of groups of several levels, like here http://i43.tinypic.com/29ok7sm.jpg Each group has some 5-10 objects, and I need to target each of them for some appearance change (the way it worked in Illustrator 9), without selecting eac