Virtual Server Configuration

Hi...
i am building a web application with servlet and JSP, and i managed to deploy it without error. However, I got problem with virtual server configurations.
Case:
I have a "global" location for all my static stuff, e.g. jsp, include file, common html file, etc. so in jsp/servlet i want to be able to get those resource just by calling "/global/<file name>"
My Solution:
I tried to configure my "server" virtual server by adding up a properties.
Properties name: global
Properties value: http://localhost/global
Problem:
But when i tried to display the page, it return me with "Object not found", so i guess /global/ doesn't redirect to http://localhost/global properly.
any solution?? thank you

Hm... waiting for a few days and no reply :(
anyway, i will try to make it more straightforward,
In brief
I want to have something like "URL Forwarding" in SUN application server 7
Question:
Does SUN application server 8 2005Q1 still have this features ? or is it droped?
My early guess was, try to use virtual server, but it doesn't solve my problem...
so any suggestion where to look at ?
thanks

Similar Messages

SJSAS 8.0.0_01 - Virtual-server/http-listener

Hi!
I want to set up three domains to be mapped to three different webapps on the same physical server. Since every HTTP-listener belongs to one virtual-server and there can't be two listener for the same port, how can I set up three different listener using the same port and different virtual servers?
A different problem: Why can't I choose a webapp that is deployed within a Enterprise Application to be the default webapp of a virtual server?
Thanks in advance,
Christoph

Hi David!
Thank you again for answering, I very much appreciate your help.
No, there is no listener interferring on the same port, that is for sure. Actually, you can't even create a listener for a taken port.
Unfortunately I can't edit the router configuration, but that's a different problem.
Here's an extract of the listener/virtual server configuration of my domain.xml, perhaps someone can see my mistake.
This is how I tried to set up the port 8008 for two different domains to different webapps ( which gave me a adress-is-already-in-use(8008)-error):
<http-listener acceptor-threads="1" address="0.0.0.0" default-virtual-server="csde" enabled="true" id="http-listener-x" port="8008" security-enabled="false" server-name="" xpowered-by="true"/>
<virtual-server default-web-module="csweb" hosts="csde" http-listeners="http-listener-x" id="csde" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
<virtual-server default-web-module="adminapp" hosts="cscom" http-listeners="http-listener-x" id="cscom" state="on">
<property name="docroot" value="${com.sun.aas.instanceRoot}/docroot"/>
<property name="accesslog" value="${com.sun.aas.instanceRoot}/logs/access"/>
</virtual-server>
Thanks in advance for any suggestion,
Christoph

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

How do you configure AMS to stream flash files from my dedicated virtual server?

I would like to stream files from my dedicated virtual server instead of my computer. Is it possible to configure AMS so that I can do this? Any help would be appreciated. Thanks!

See screenshots:
Nancy O.

Iws6sp3 Configuring virtual server administrator�s user interface

Hi I am trying to configure my virtual server admininstrator interface. I followed the admin guide iws60 816-1379-01 May 2001, Chapter 13 "Using Virtual Servers" page 307. I followed all the steps however when I go to my browser, what should I type in for the URL?
Example given:
server_name:port/user-app/server_instance/virtual_server_ID
Q1. should mine will be:
http://127.0.0.1:8889/user-app/test.mytest.com/https-test.mytest.com
if I am trying out my default virtual server?
Q2. If I have created another virtual server called, esample.indoors.com will that by my vistual_server_id?
Q3. Why after adding the extra codes into my server.xml, I cannot access my default admin port which is 8888?
Below is my server.xml
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE SERVER SYSTEM "server.dtd" [
<!ATTLIST VARS
docroot CDATA #IMPLIED
adminusers CDATA #IMPLIED
webapps_file CDATA #IMPLIED
webapps_enable CDATA #IMPLIED
accesslog CDATA #IMPLIED
user CDATA #IMPLIED
group CDATA #IMPLIED
chroot CDATA #IMPLIED
dir CDATA #IMPLIED
nice CDATA #IMPLIED
>
]>
<SERVER legacyls="ls1">
<VARS accesslog="E:/iPlanet/iws6sp3/https-admserv/logs/access"/>
<LS id="ls1" ip="0.0.0.0" port="8888" security="off" acceptorthreads="1">
<CONNECTIONGROUP id="group1" matchingip="default" servername="test.mytest.com" defaultvs="https-admserv"/>
</LS>
<MIME id="mime1" file="mime.types" />
<ACLFILE id="acl1" file="E:/iPlanet/iws6sp3/httpacl/generated.https-admserv.acl" />
<VSCLASS id="defaultclass" objectfile="obj.conf" rootobject="default" acceptlanguage="on">
<VS id="https-admserv" connections="group1" mime="mime1" urlhosts="test.mytest.com" aclids="acl1">
<VARS webapps_file="web-apps.xml" webapps_enable="on"/>
<USERDB id="default" database="default" />
</VS>
</VSCLASS>
<LS id="ls5" ip="0.0.0.0" port="8889" security="off" acceptorthreads="1" blocking="no">
<CONNECTIONGROUP id="group5" matchingip="default" servername="test.mytest.com"
defaultvs="useradmin"/>
</LS>
<VSCLASS id="userclass" objectfile="userclass.obj.conf" rootobject="default" acceptlanguage="on">
<VS id="useradmin" connections="group5" state="on" mime="mime1" urlhosts="user-app" aclids="acl1">
<VARS webapps_file="user-apps.xml" webapps_enable="on"/>
<USERDB id="default" database="default" />
</VS>
</VSCLASS>
</SERVER>

Hi Chris,
thanks for your reply! Pilot Extended Listener; Pilot Listener; WWW and JBOSS are running and I started Pilot Extended Listener before Jboss, but it doesn't work.
It tries to open http://localhost/pilot/scriptmain.pw?userinfo=/pilot/pipadmin/adminstart4.htm but there isn't a file "scriptmain.pw" in the pilot directory, only the file "scriptmain.pip". Maybe it is missing?!
best regards,
Rob

"Cluster is incorrectly configured on the virtual server." re-add server

Took a server out of a pool, then later went to re-add. /OVS/ mounts fine on the server, but when I go to VM Mangler, it throws the following errors:
"OVM-1011 Oracle VM Server sonorx3 operation HA Check Prerequisite failed: failed: <Exception: ha_check_shared_storage_mount failed: <Exception: srv('sonorx3'). failed! => <Exception: Cluster is incorrectly configured on the virtual server.> ."
In /var/log/ovs-agent/ovs_operation.log on the host that fails to join, I see:
"StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 99, in check_shared_storage_mount
raise Exception("Cluster is incorrectly configured on the virtual server.")"
What step is missing here?

I've tried re-doing ovs-makerepo.
Google doesn't know anything about the problem (other than this thread here, which it has already indexed).
What gives?

Configuring virtual server using iplanet.

is it possible to have a virtual server which do not have an entry in DNS server but have entry in etc/host file?
i am using iplanet for configuring a virtual server

The inbound port is the port that is used on the Internet side. It is the port that the outside world will use when accessing your service.
The private port is the port that the router sends it to on your local network. It is the port where your computer is expecting the information.
Many times you will set both ports to the same value.

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

How to restart a virtual server in WS7

Does anybody know host restart a virtual server without restarting the whole instance?
Thanks.

you can run 'bin/reconfig' - this will make any changes (that does not require a restart) available to the running server (this includes all virtual servers configured within this server instance) without requiring a restart - i mean without any downtime
no, there is no way to make dynamic reconfig work only for a single virtual server. but i guess, what you care most is - ability to modify a setting for a virtual server without disturbing other virtual servers - 'bin/reconfig' is probably what u r looking for.

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Need help in creating virtual server

Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ram

Hi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram

How can you tell what type of server configuration is installed? is it j2ee or not?

Before I run an updater, how can I tell if the server is a
j2ee server configuration or a "regular" server configuration? Its
on on Linux os...

My "Settings Summary" shows;
Server Product ColdFusion MX
Version 7,0,0,91690
Edition Enterprise
Serial Number blah-blah-blah
Operating System UNIX
OS Version 2.6.15-1.1833_FC4smp
JVM Details
Java Version 1.4.2_05
Java Vendor Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home /opt/coldfusionmx7/runtime/jre
Java File Encoding UTF8
Java Default Locale en_US
File Separator /
Path Separator :
Line Separator Chr(10)
User Name nobody
User Home /
User Dir /opt/coldfusionmx7/runtime/bin
Java VM Specification Version 1.0
Java VM Specification Vendor Sun Microsystems Inc.
Java VM Specification Name Java Virtual Machine Specification
Java VM Version 1.4.2_05-b04
Java VM Vendor Sun Microsystems Inc.
Java VM Name Java HotSpot(TM) Server VM
Java Specification Version 1.4
Java Specification Vendor Sun Microsystems Inc.
Java Specification Name Java Platform API Specification
Java Class Version 48.0
--> and lots more, but no mention whether its a J2EE
configued server or not...so should I assume its not a
regular/non-J2EE server?
I ask because the Updaters instructions show a BIG difference
depending on which type it is to be updated...thanx...Matt

22591 The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object. Ensure that the computer name is unique in the VMM environment, and then try again.

Hello everyone,
I recently bummed into an error message when I want to deploy a service template.
Setup:
1 HyperV server on win2k12 r2
1 SCCM VMM 2k12r2 on the hyperv server
1 template with all the objects in the library
Error:
When I deploy the the service template I get the below error message.
22591
The specified computer name (%ComputerName;) is already in use by another virtual machine or by a virtual machine configuration object.
Ensure that the computer name is unique in the VMM environment, and then try again.
The issue is that I can't find it anywhere, not on my domain controller not on my dns server as a record and also not as a vm in sccm or in powershell when doing get-vm. So where do I need to remove it ( no it is not an option to create a new Hostname for
this service template ).
Andre

There could be a couple things happening.
One - you have a Service Template, it defines %Computername% as a variable. And you have deployed this Template once using 'foo' and you are deploying it again as 'foo' without deleting the previous instance.
Two - you hardcoded the computer name into the template.
Three - you are scaling out and you have hit the bug that the wizard does not increment the machinename if you have something like computername## where SCVMM should be incrementing the machine name.
Windows does not support identically named machines (you can't have two machines on the same network with the same computer name - they broadcast their name and the 'second' one shuts down its network stack). In support of this SCVMM also enforces
this rule.
And with any templates SCVMM is in charge of machine names at deployment.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Virtual Server Configuration

Similar Messages

Maybe you are looking for