Virtual Storage Error Count report large number

Hi,
I've win 2012 std with hyperv role on it.
i've setup a virtual machine with 1 IDE disk and 1 SCSI disk all VHD on local disk.
when i monitor the server with veeam one it report that the Virtual Storage Error Count in large (9) on the SCSI driver even if this drive is not loaded at all.
why is that?
I've seen this particular issue on several occasions as well as from various monitoring tools. Here is another thread concerning this same alert for a Virtual Storage Device Error Count with a value of 9, however, the source of the alert in this case is
the Hyper V Management Pack for System Center Operations Manager:
http://social.technet.microsoft.com/Forums/en-US/operationsmanagermgmtpacks/thread/6f4248aa-ed66-4ae1-b767-8238efc2e162/
In each of these instances of the issue, there are a few environmental variables that generally seem to remain the same -
The affected VM's are Server 2012 or Windows 8 guests running on a Server 2012 Hyper V host.
The VHD's reporting the high Virtual Storage Device Error Count are using a SCSI controller.
The disks are not pass-through disks ( http://support.microsoft.com/kb/2624495 )
In most cases the same value of 9 is reported for the error count metric.
The same error count value can be observed within Perfmon.exe on the host containing the affected VM(s) by adding the following performance counter for the affected VHD(s):
Hyper-V Virtual Storage Device > Error Count
The metric value for the affected VHD(s) can be reset by powering off the VM and rebooting the host server, however, this is often not possible in a production environment. Additionally, the error count value climbs to and halts at 9 immediately after the VM
is powered back on. I've observed this behavior in Perfmon.exe while testing ways to reset the counter and, in turn, clear the alarms from any monitoring tools. There do not seem to be any correlating events logged in the Event Viewer or cluster
events that would indicate that there actually is an issue occurring with the Virtual Storage Device.
Overriding the alert completely would not be ideal as this would cause no alerts to trigger in the event of an actual problem with the device, thus I would like to find a way to reset only this particular performance counter while both the host and the VM(s)
are powered on. Additionally, any information in regards to the root cause of this issue would be appreciated!

Similar Messages

How to design Storage Spaces with a large number of drives

I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
replace it without SS tossing it's cookies.
In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself.
Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
to the parent OS. Did i miss anything?
Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool?

I am wondering how one might go about designing a storage space for a large number of drives. Specifically I've got 45 x 4TB drives. As i am not extremely familiar with storage spaces, i'm a bit confused as to how I should go about designing this. Here is
how i would do it in hardware raid and i'd like to know how to best match this setup in Storage Spaces. I've been burned twice now by poorly designed storage spaces and i don't want to get burned again. I want to make sure if a drive fails, i'm able to properly
replace it without SS tossing it's cookies.
In the hardware raid world, i would divide these 45 x 4TB drives into three separate 15 disk Raid 6's. (Thus losing 6 drives to parity) Each raid 6 would show up as a separate volume/drive to the parent
OS. If any disk failed in any of the three raids, i would simply pull it out and put a new disk back in and the raid would rebuild itself.
Here is my best guess for storage spaces. I would create 3 separate storage pools each containing 15 disks. I would then create a separate
Dual Parity Virtual Disk for each pool. (Also losing 6 drives to parity) Each virtual disk would appear as a separate volume/disk
to the parent OS. Did i miss anything?
Additionally, is there any benefit to breaking up my 45 disks into 3 separate pools? Would it be better to create one giant pool with all 45 disks and then create 3 (or however many) virtual disks on top of that one pool?
1) Try to avoid parity and esp. double parity RAIDs with a typical VM workload. It's dominated by small reads (OK) and small writes (not OK as whole parity stripe gets updated with any "ready-modify-write" sequence). As a result writes would be DOG slow.
Another nasty parity RAID characteristic is very long rebuild times... It's pretty easy to get second (third with double parity) drive failure during re-build process and that would render the whole RAID set useless. Solution would be to use RAID10. Much safer,
faster to work and rebuild compared to RAID5/6 but wastes half of raw capacity...
2) Creating "islands" of storage is an extremely effective way of stealing IOPS away from your config. Typical modern RAID set would run out of IOPS long before running out of capacity so unless you're planning to have a file dump of an ice cold data or
CCTV storage you'll absolutely need all IOPS from all spindles @ the same time. This again means One Big RAID10, OBR10.
Hope this helped a bit :) Good luck!
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

DBA Reports large number of inactive sessions with 11.1.1.1

All,
We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we are reaching our Max Allowed Process on the Oracle Database server. We are running Oracle 10.2.0.4 on AIX.
We also have some System 9.3.1 Development servers that point at separate schemas in this environment and we don't see the same high number of inactive connections?
Most of the inactive connections are coming from Shared Services and Workspace. Anyone else see this or have any ideas?
Thanks for any responses.
Keith
Just a quick update. Originally I said this was only with 11.1.1.1 but we see the same high number of inactive sessions in 9.3. Anyone else see a large number of inactive sessions. They show up in Oracle as JDBC_Connect_Client. Does Shared Service, Planning Workspace etc utilize persistent connections or does it just abandon sessions when the windows service associated with an application is shutdown? Any information or thoughts are appreciated.
Edited by: Keith A on Oct 6, 2009 9:06 AM

Hi,
Not the answer you are looking for but have you logged it with Oracle as you might not get many answers to this question on here.
Cheers
John
http://john-goodwin.blogspot.com/

ActiveX Printer Error when print large number of page

Hi,
I have this problem when developing the report on my project.
I developed the Crystal Report embedded in Visual Studio 2008 to be displayed in web form.
I'm using .NET and the operating system of the development computer is Windows 7 32 bit.
The problem is, I have a quite complex report displaying the statement for the customer which is result in 209 pages.
When the report has successfully loaded, I simply click the print icon and it comes up with the error "A communication error occurred. Printing will be stopped"
But, after that...I tried something different, when the report has successfully loaded, I went through the report by moving for every 30 pages until it reaches the last page and click the print icon. and it prints without any errors!
Anybody knows what caused this?
By the way, I'm using the ActiveX printing mode for the Crystal Report.
Thanks
-Marry-

I'm thinking there is something not processed in the report so forcing the report to process everything up to the last page before printing may help. Try the following code before sending the report to the viewer:
Dim prc As New CrystalDecisions.Shared.ReportPageRequestContext
rptDoc.FormatEngine.GetLastPageNumber(prc)
This may slow down the time it takes for the report to come up as the whole report will need to be processed, formatted, etc.
Also, make sure you have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Deliver Reports Large number of users.

Hi Experts,
We want to deliver set of reports to our customers (1000 customers) with data level security.
i.e., A customer can only see their data.
How can I achieve this using BI Publisher.? Do we require licenses for these numbers of users.?
Can you please help.?
Thank You.

Hi Damodhar
User mapping can be done in the programming level. The User Management Engine in EP 6.0 provides two interfaces to access the user mapping data namely
1. IUserMappingService.
2. IUserMappingData.
You can implement these two intefaces to enable User Mapping. Please refer to the following link for further details.
http://help.sap.com/saphelp_nw04/helpdata/en/69/3482ee0d70492fa63ffe519f5758f5/content.htm
Hope that was helpful.
Best Regards
Priya

What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
in advance.
Alert: Error Count Monitor Resolution state: New
Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
Sat 09/02
To:Administrator
09 February 2013 14:09
Alert: Error Count Monitor
Source: MyVm01
Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
Last modified by: System
Last modified time: 2/9/2013 2:08:48 PM
Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
            Object Hyper-V Virtual Storage Device
            Counter Error Count
            Has a value 9
            At time 2013-02-09T14:08:48.0000000+00:00
Darren

But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
Thanks for responding.
Time Sampled:
09/02/2013 14:08:48
Object Name:
Hyper-V Virtual Storage Device
Counter Name:
Error Count
Instance Name:
c:-clusterstorage-volume1-myvm-virtual
hard disks-MyVM-DATA02.vhdx
Value:
9
Darren

Internal Error 500 started appearing even after setting a large number for postParametersLimit

Hello,
I adopted a CF 9 web-application and we're receiving the Internal 500 Error on a submit from a form that has line items for a RMA.
The server originally only had Cumulative Hot Fix 1 on it and I thought if I installed Cumulative Hot Fix 4, I would be able to adjust the postParametersLimit variable in the neo-runtime.xml. So, I tried doing this, and I've tried setting the number to an extremely large number (last try was 40000), and I'm still getting this error. I've tried putting a <cfabort> on the first line on the cfm file that is being called, but I'm still getting the 500 error.
As I mentioned, it's a RMA form and if the RMA has a few lines say up to 20 or 25 it will work.
I've tried increasing the following all at the same time:
postParameterSize to 1000 MB
Max size of post data 1000MB
Request throttle Memory 768MB
Maximum JVM Heap Size - 1024 MB
Enable HTTP Status Codes - unchecked
Here's some extra backgroun on this situation. This is all that happened before I got the server:
The CF Server is installed as a virtual machin and was originally part of a domain that was exposed to the internet and the internal network. The CF Admin was exposed to the internet.
AT THIS TIME THE RMA FORM WORKED PROPERLY, EVEN WITH LARGE NUMBER OF LINE ITEMS.
The CF Server was hacked, so they did the following:
They took a snapshot of the CF Server
Unjoined it from the domain and put it in the DMZ.
The server can no longer connect to the internet outbound, inbound connections are allowed through SSL
Installed cumulative hot fix 1 and hot fix APSB13-13
Changed the Default port for SQL on the SQL Server.
This is when the RMA form stopped working and I inherited the server. Yeah!
Any ideas on what i can try next or why this would have suddenly stopped working after making the above changes on the server.
Thank you

Start from the beginning. Return to the default values, and see what happens. To do so, proceed as follows.
Temporarily shut ColdFusion down. Create a back-up of the file neo-runtime.xml, just in case.
Now, open the file in a text editor and revert postParametersLimit and postSizeLimit to their respective default values, namely,
<var name='postParametersLimit'><number>100.0</number></var>
<var name='postSizeLimit'><number>100.0</number></var>
That is, 100 parameters and 100 MB, respectively. (Note that there is no postParameterSize! If you had included that element in the XML, remove it.)
Restart ColdFusion. Test and tell.

Error in send message to A large number of audience

I want to send a message to A large number of audience but I get an error
This error
<< Messaging is sending a large number of SMS messages. Do you want to allow this app to continue sending messages? >>
Deny ....... Allow
Please Help me

@AB2
You will have to contact Google's Android division on this issue, not Sony.
You have to see this pop up or this feature as a way to protect you, some people don't have unlimited text messages, and there are apps that might start sending large amounts of texts.
You can see this on other forums
http://forums.androidcentral.com/google-nexus-4/227096-messaging-sending-large-amount-messages.html
http://android.stackexchange.com/questions/38461/pop-up-message-when-sending-large-amounts-of-sms-me...
https://code.google.com/p/android/issues/detail?id=36617
Is or was your phone locked to a carrier/network branded? if it is or was, perhaps your carrier network could fix this.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library.

I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....

Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe

When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors. But if I boot off an external drive and check the same SSD, no errors are reported. Is this a bug in Mavericks?

When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors. But if I boot off an external drive and check the same SSD, no errors are reported.
This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks). So far as I know, all of the kit I am using is in good order (despite the file corruption reports). So I am beginning to wonder if it could be due to a bug in Mavericks? Both SSD drives have been formatted to MacOS Extended (journaled) format. Should I have used a different format, I wonder?
Has anyone else encountered this issue?
Does anyone have a solution?
Or an explanation that might help my investigation of the issue?
Thanks guys,

I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs.
I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

Oracle Error 01034 After attempting to delete a large number of rows

I sent the command to delete a large number of rows from a table in an oracle database (Oracle 10G / Solaris). The database files are located at /dbo partition. Before the command the disk space utilization was at 84% and now it is at 100%.
SQL Command I ran:
delete from oss_cell_main where time < '30 jul 2009'
If I try to connect to the database now I get the following error:
ORA-01034: ORACLE not available
df -h returns the following:
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d6 4.9G 5.0M 4.9G 1% /db_arch
/dev/md/dsk/d7 20G 11G 8.1G 59% /db_dump
/dev/md/dsk/d8 42G 42G 0K 100% /dbo
I tried to get the space back by deleting all the data in the table oss_cell_main :
drop table oss_cell_main purge
But no change in df output.
I have tried solving it myself but could not find sufficient directed information. Even pointing me to the right documentation will be higly appreciated. I have already looking at the following:
du -h :
du -h8K ./lost+found
1008M ./system/69333
1008M ./system
10G ./rollback/69333
10G ./rollback
27G ./data/69333
27G ./data
1K ./inx/69333
2K ./inx
3.8G ./tmp/69333
3.8G ./tmp
150M ./redo/69333
150M ./redo
42G .
I think its the rollback folder that has increased in size immensely.
SQL> show parameter undo
NAME TYPE VALUE
undo_management string AUTO
undo_retention integer 10800
undo_tablespace string UNDOTBS1
select * from dba_tablespaces where tablespace_name = 'UNDOTBS1'
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
UNDOTBS1 8192 65536 1
2147483645 65536 ONLINE UNDO LOGGING NO LOCAL
SYSTEM NO MANUAL DISABLED NOGUARANTEE NO
Note: I can reconnect to the database for short periods of time by restarting the database. After some restarts it does connect but for a few minutes only but not long enough to run exp.

Check the alert log for errors.
Select file_name, bytes from dba_data_files order by bytes;
Try to shrink some datafiles to get space back.

Counting errors occured in personnel number (0HR_PT_2)

When loading data in BW with extractor 0HR_PT_2 we find the following message in the applicationlog:
'counting errors occured in personnel number....'
This problem causes the upload in BW to 'hang'in yellow status and the administrator must manually start the next staging (-> ODS en --> cube)
What also strikes as a bit strange is that the personnel-number in question doesn't belong to the selected CO-area in the infopackage
Anyone a clue?
Lex Meijerink

Hi,
I've found this note that might be helpfull for us.
Note 800049:
Summary
Symptom
You are using time management datasources 0HR_PT_1/2/3 for extracting data from R/3. During extraction the message 023 from the message class HRTIM00DW may occur in the protocol. This is an application warning message explaining that the error happened in the application processing part of extraction. This problem should be corrected through changing the application customizing appropriately.
If you want to change the category of this message from "warning" to "information", please implement the correction instruction from this note. This correction is a modification and the change will not be delivered with the next service package and is not in the standard. Therefore, please implement the correction instruction manually. If in the future you want the message category to be changed back to "warning" then please take the change back.
Other terms
0HR_PT_1, HRTIM00DW 023, 023, 0HR_PT_2, 0HR_PT_3
Reason and Prerequisites
Modification
Solution
Please implement the correction instruction manually. If in the future you want the message category to be changed back to "warning" then please take the change back.
David

Large number of errors on 6500, when using Apple MACS

Hi,
Getting large number of errors on 6500
ETHC-5-PORT FROM STP - PORT LEAVING BRIDGE - PORT JOINING BRIDGE
connected devices are apple macs running GigE.
Anyone seen this before?
Cheers
Scott

Hi Scott,
Can you check the speed and duplex settings on machines as well as switch ports on which you have connected apple macs? I will say to make it a manual config if you have them on auto auto settings.
Regards,
Ankur

Report model - number of values selected in DDL param

Good afternoon,
I have created a report model that references Teradata views, and I am using this model to populate several datasets in a Report Builder report. One dataset returns actual results, and the other datasets are used to populate available values for multivalued
parameters.
The issue I'm encountering is that some of my parameters return a large number (tens or hundreds of thousands) of selectable values. When clicking "select all", I'm getting an error, since the concatenated list of values exceeds
the length limit. However, since I'm working with a report model, I cannot use T-SQL workarounds such as custom "<ALL>" values/handling. I also need to limit my result set using these values as parameters, not filters, since I want
the intensive processing handled in the DB server, not the app server.
Is there any possible way to accommodate this? As an example, I have a large (200k+) list of products, belonging to about 7,000 brands. I want both my product number and brand lists as multivalue parameters...I might want to run
the report for all products and all brands (returning 200k+ rows), or choose "select all" in the products list, but only pick a few brands (or vice versa). Cascading parameters (with the first parameter limiting the next set of values)
is not an option since there are many of these parameters that have too many values for the allowed limit (i.e. even my brand list generated the error when I choose "select all" and only picked a few products).
I have searched literally dozens of forums and tech sites, all to no avail thus far. Any assistance will be greatly appreciated...thank you!
-Chris

I have a SSRS Report with 4 multi-select parameters.
The customer has requested that they would like the drill-through to open in a new window.
I am using Java Script for that purpose.
However, there is a limit on how long a URL may be.
Is there a way in a SSRS report to limit the number of values in a multi-select parameter selected?
Thanks.
One workaround is to add a internal parameter which will count the number of selected values and will allow the navigation only if the count falls below the threshold.
For this you can use an expression like below for setting the internal parameter
Len(Join(Parameters!MultiValuedParameter.Value,","))-Replace(Join(Parameters!MultiValuedParameter.Value,","),",","")
Then use expression like below for the jump to url/report property
IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,<report url>,Nothing)
You can also add a notification textbox on top which will show a message like "Report navigation not possible due to too many values selected" and keep it hidden by default. Then based on above parameter value you can make it visible
ie make hidden property like below
IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,False,True)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Error generating report in Report writer (GR214, short dump)

Hello
We are making a report in GGR2. When generating the report group, we have dump with error:
Short text of error message:
Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
ELD.
Long text of error message:
Technical information about the message:
Message class....... "GR"
Number.............. 214
Variable 1.......... "SAPMGRW2"
Variable 2.......... "MGRW2F20"
Variable 3.......... "GEN_DATAFIELD"
Variable 4.......... " "
I have generated as well via GR52 with the same result.
The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
Thanks for your help
Kai

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Virtual Storage Error Count report large number

Similar Messages

Maybe you are looking for