Virtual Systems

Is there a solution for running multiple operating systems on Mac OS X Server?
I would like to consolidate a couple of legacy Windows/Linux servers onto a single Mac OS X Server so that, I could still use ARD to administrate them.

read,
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b4a0db7acc11d1899e0000e829fbbd/frameset.htm
Regards
Juan

Similar Messages

Activate CHaRM using Virtual Systems in Landscape

Is it possible to activate a CHaRM project against a landscape that
contains virtual systems?
We currently have a Development system (DEV) with a virtual Test system
(QAS) and virtual Production system (PRD). These systems are marked as
Virtual in TMS and SMSY System Landscape. We have added these systems t
o
the Logical Components and created a new Solution Manager project and
want to activate CHaRM against this scenario. .
The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
this scenario possible? Do the standard CHaRM activation checks (RFC's,
Authorizations, etc) get bypassed because these systems are virtual?
When activating CHaRM, we still receive the error that no consolidation
system exists for our Dev system even though the TMS routes have been
defined properly. However, since these systems are virtual, we cannot
add client information to them.
Thanks

Hi,
>
Thiago Luttig wrote:
> Is it possible to activate a CHaRM project against a landscape that
> contains virtual systems?
> The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
> this scenario possible?
A virtual system cannot export any TR. So any request imported to QAS cannot be exported
So
>
Thiago Luttig wrote:
> The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
> this scenario possible?
is not possible.
Hope this answers your question.
Feel free to revert back.
--Ragu

Where do i find cofiles/datafiles for virtual system

Hello,
Here is my setup
at our site there was a development system DEV, and a production virtual system PRD was created.
After everything is ready in DEV we make a system copy to remote production system (PRD)and need to add the transports there, as this is the real life production system. I copy the buffers, but in the cofiles/datafiles i can not find anything in /usr/sap/trans/ in DEV which is the old domain controller and holds sapmnt
Any idea how to solve this?

Dimitar
You may want to check in other directories since you inherited this system.
Also, if you are using Unix, or related OS, it may be possible that /usr/sap/trans was mounted over the local directory containing the cofiles and data files.
You may want to unmount and check locally.
Just a thoughtu2026
Hope this helps.
PJ

Creating a virtual system for transport landscape

Hello
We have an isolated system that has transport system set to Local change Requests and would like to transport some of the transports into another system. I found in a thread here that we need to create a virtual system for creating a transport route. Can anyone tell me how to create the virtual system?
Thanks
A.

Hi Aleksandra,
You can create virtual system like below.
Make sure you have configured the domain controller.
Login to the system,client 000 and user with same authorization of sap*
Execute t-code STMS
from the menu Goto overview ->systems
You will get one entry of the domain controller.
Then from that screen from menu sap system -> create ->virtual system.
Provide the data for the sid and description and save your entry,
Then you can configure the root.
Regards
Ashok

Change Request Management: virtual systems

Hi!
We would like to set up Change Request Management (ChaRM) approach for 3 +1 systems:
DEV --> VT1 (virtual system) --> QAS --> PRD
Questions:
1) Are there some restrictions implementing ChaRM with virtual systems?
2) We would like to use in parallel non-ChaRM transports and we have there
an automatic transport twice a day.
Will this approach be a problem for the ChaRM?
3) Which transport routes will be used by ChaRM?
a) one for transportof the SAP objects (e.g. "SAP") and one standard transport route (e.g. Z<SID>) or
b) do I have the possibility to choose the transport routes?
Any helpful information will be very appreciated and awarded by points.
H. Thomasson

I am very sorry for the mess I did trying to post my message. I was not able to post it.
Can you please give me any solutions to the problem reported?
Thanks
Antonello

ChaRM implementation with virtual systems

Hello Gurus,
We have successfully installed and done basic settings for Solution Manager 7.0 EHP1 system, we are planning to implement ChaRM and I have already downloaded the guide for it.
But I have few doubts regarding its setup like since we don't have DEV, QAS and PRD setup yet, so is it possible to configure ChaRM right now?? maybe with virtual systems ??
Will it be better to configure ChaRM only after DEV installation ?
Also, I am not clear about the transports which will be done from Solution manager using ChaRM, is it like you create transport request from Solman or from DEV ??
Thanks for providing any valuable information !!
Cheers !!
Shobhit Garg

Hi
these will help you
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards
Prakhar

Virtual systems within Transport system landscape

Hi!
I should map the existing transport management system landscape into ChaRM approach within SOLMAN.
The existing transport management system landscape has a lot of virtual systems with virtual transport routes.
Can some one of you explain the usage of such virtual systems with their virtual transport routes?
Thank you very much!
regards
Thom

read,
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b4a0db7acc11d1899e0000e829fbbd/frameset.htm
Regards
Juan

ChaRM approach (virtual systems)

Hi ChaRM-experts!
We have a comprehensive SAP system landscape with several virtual systems and virtual transport routes.
What is the best way to map such landscape into ChaRM approach (system roles) within SAP Solution Manager 7.0?
Thank you very much!
regards
Thom

Dear Karl, Please use following documentation to configure CHaRM incase you have only one system present at this moment, Later you can alter the configuration once QAS and PRD are installed.
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part1)
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part2)
Hope it helps.
Regards, Amber S | CTS

ChaRM: Two Virtual Systems?

Hi Experts,
It is possible to have two virtual systems in a ChaRM three tier landscape? DEV -> Virtual System 1 -> Virtual System 2?
This is because only DEV is available now with QAS and PRD following in the future. Thanks!
Best Regards,
Karl

Dear Karl, Please use following documentation to configure CHaRM incase you have only one system present at this moment, Later you can alter the configuration once QAS and PRD are installed.
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part1)
How To - Configure ChaRM on Single Managed System with multiple client for PoC(Part2)
Hope it helps.
Regards, Amber S | CTS

Virtual systems in SMSY? (Change Control Mgmt. & Change Request Mgmt.)

Dear all,
We plan to implement Change Control Management (CCM) and Change Request Management (Charm).
At the current stage of the project, we do not have all satellite systems ready (e.g. production system is missing, Dev and QA are setup).
Nevertheless we want to start setup of Charm and CCM.
We understand that we have to "register" the missing systems in the STMS as virtual systems.
But how do we do that in the SMSY?
Do we enter the data manually? or can we "load" the data out of the STMS?
And what are the typical traps and errors we can make (i.e. hopefully avoid making). Anyone to share his/her experience?
Thanks and Regards,
Jan
Edited by: Jan Krüger on Jun 30, 2009 9:34 PM

Hi Jan
please see:
http://help.sap.com/saphelp_smehp1/helpdata/en/9c/efa9068cce4149a40d7991ad2113f3/content.htm
Goto SMSY
Systems
Select your SAP XXX (like SAP ERP or SAP Netweaver)
Click on your SID
On the right hand side you go to the tab "Header Data"
Here you can aktivate planned or production
If you are unable to see the planned button that this is because your setting for data source is not set to manual.
Than please click on the button "Other object" (SHift + F5), for System enter your SID and click on the lock "Set Datasource to Manual input CTRL+F9)
This will set your SID-System to manual adjustment - just confirm.
Than you can mark your system as planned
You will be able to add clients manually yes.
regards
Nesimi

How to include virtual system in transport domain

Hi all,
I have my development and quality servers running on one instance.at the time of configuring STMS,i have made the transport domain and included both the systems.Also i have configured production system as the virtual system.Now i have installed the production system on a different host with a different transport directory and want to include this system in the transort domain.in a way the virtual system will be replaced.
How should i do it.
Regards
Praveen

Hi Praveen,
If you want to include a system in your existing transport domain, just login into the system, in T-code STMS you will get a POP UP choose other configuration ,it will ask for-:
System
Description
Target Host
System Number
Save the settings and wait for some time it will automatically added in your Transport Domain.
Reward Points if find it useful.
Thanks,
Prashant.

How to create virtual system

Hi all,
i am fresher i wish to check with client export and i am having access to only one sap system.
how can i create the virtual system for the purpose of testing of client export?
thanks,
Dinesh.

Hi Dinesh,
Go to domain controller. Then go to STMS transaction.Then from menu bar choose Overview-->Systems.
In the next screen in menu bar choose SAP systemCreate-Virtual system.
Give the virtual sytem name and description. Save the changes. Keep the communication system same.
Then adjust the transport routes in STMS accordingly.
Regards.
Ruchit.

How to replace the virtual system as the real system in the TMS?

Hi,
I have a standard 3 systems TMS, which is 1 development system (real system, transport domain) and 2 virtual system(QAS and PRD).
And now, I will install the QAS system and replace the virtual system as the real one, How can I do in TMS?
I should delete the old TMS and rebuild the TMS with 1 DEV, 1 QAS and 1 virtual PRD? or just replace the QAS as the real one? What the operation should I do in t-code:STMS?
Many thanks.
BR,
Randy

Hi,
Do it as follows.
1. Remove transport routes (i think it is not mandatory)
2. Remove your Virtual system that you want to replace with physical system
3. Include the Physical system into Domain and accept it from Domain Controller
4. Configure the transport routes.You can see all the transports that were in the import queue of virtual system are now in the import queue of the Physical system that you added.
Only condition is, both Virtual System and Physical System should have same SID.
All the above will be done through STMS
Thanks,
Giri

STMS Configuration - Change Virtual System with Real System

Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
Giulio

Hi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal

Do i neet to create Virtual system

hi Friends,
I am going to install fresh ECC6.0 on AIX for Development system as well as for QAC system.... So theres going to be two installations of ECC6.0 (non-MCOD) on one AIX box.
1. In this scenario i would like to know should i create Virtual System while assigning DEV as Domain Controller or i shouldnt create Virtual system..
2. Why do we create Virtual System ?
3. What if i dont create a Virtual System and Directly create a landscape for DEV and QAC as "standard system landscape for two system" would this strategy be fine.
What is the right methodology please suggest...
Regards
Ayush

Hi Ayush,
If you have DEV and QAS, than you can just create "standard system landscape for two system" scenario 3.
Virtual system only use if you only have development only.
Hope answer your question.
Regards,
Fendi

CHaRM - Target group and Virtual System

Hi,
Could anyone let me know if Virtual System and target groups could be used with CHaRM?
Current set up with three systems/clients works fine, however, for a new project with active STMS version with target group and virtual system, even the task list is unable to be created.
Can you please help?
Regards

Hi,
As far as i know, you can't use virtual system for ChaRM.
Regards,
Sanjai

Virtual Systems

Similar Messages

Maybe you are looking for