Virtual WLC in LAB environment

Hi!
I have just installed a Virtual WLC at home for lab purpose. Now i want to connect one accesspoint to my wlc, but for now the WLC says "0 access points supported".
Can i somehow still use the evaluation licens and connect a accesspoint to the wlc?
/Lajja1234

Hi Lajja,
You have to enable the evaluation license in order to allow the AP to join.
How to do it, please check here:
http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html
Hope it helps.
Regards
Dont forget to rate helpful posts

Similar Messages

Virtualized WLC + Prime + MSE solution

Dear all,
we are facing some problem to deploy a virtualized localization solution made of WLC, Prime Infrastructure and MSE.
We constructed, in our lab, on a UCS C220M3 with VMWare 5.1 the following solution:
Virtual WLC version 7.3.101 (ip address 10.0.1.249)
Prime Infrastructure 1.2.0.103 (ip address 10.0.1.250)
Virtual MSE 7.3.101 (ip address 10.0.1.247)
WLC is working properly, can register APs and is properly integrated with the Prime. For the localization solution we deployed three access points:
-one 3502 in flex connect mode
-two 1142 in monitor mode
The problem came out when we started to work with the MSE. MSE has been registered inside Prime and synchronized with maps and controller.
After that we checked the maps but no information was displayed. So we started facing the problem and we found that the NMSP protocol remained inactive even if the troubleshooting windows didn't report any explicit issue.
At this stage we started checking the debug messages and in particular, for the NMSP we countinuously received the follwing message:
*nmspRxServerTask: Nov 17 17:55:09.777: Allocated new NMSP connection 0
*nmspRxServerTask: Nov 17 17:55:09.778: sslConnectionInit: SSL_new() conn ssl 0x2aaaae71ab88
*nmspRxServerTask: Nov 17 17:55:09.778: sslConnectionInit: SSL_do_handshake for conn ssl 0x2aaaae71ab88, conn state: INIT, SSL state: HANDSHAKING
*nmspRxServerTask: Nov 17 17:55:09.778: -- returns WANT_READ for conn ssl 0x2aaaae71ab88
*nmspRxServerTask: Nov 17 17:55:09.778: sslConnectionInit() success with Connection state: INIT, SSL state: HANDSHAKING
*nmspRxServerTask: Nov 17 17:55:09.785: doSSLRecvLoop: Handshake has not completed for conn 0
*nmspRxServerTask: Nov 17 17:55:09.785: sslConnectionInit: SSL_do_handshake for conn ssl 0x2aaaae71ab88, conn state: INIT, SSL state: HANDSHAKING
*nmspRxServerTask: Nov 17 17:55:09.785: -- returns WANT_READ for conn ssl 0x2aaaae71ab88
*nmspRxServerTask: Nov 17 17:55:10.100: doSSLRecvLoop: Handshake has not completed for conn 0
*nmspRxServerTask: Nov 17 17:55:10.100: sslConnectionInit: SSL_do_handshake for conn ssl 0x2aaaae71ab88, conn state: INIT, SSL state: HANDSHAKING
*nmspRxServerTask: Nov 17 17:55:10.100: -- handshake failed for conn ssl 0x2aaaae71ab88,error = error:00000000:lib(0):func(0):reason(0)
*nmspRxServerTask: Nov 17 17:55:10.100: freeing Nmsp conn ssl 0x2aaaae71ab88, conn id 0
Also the statistics for the NMSP protocol emphatized an SSL error:
(Cisco Controller) >show nmsp statistics summary
NMSP Global Counters
Client Measure Send Fail......................... 0
Send RSSI with no entry.......................... 0
APP msg too big.................................. 0
Failed Select on Accept Socket................... 0
Failed SSL write................................. 0
Partial SSL write................................ 0
SSL write returned zero.......................... 0
SSL write attempts to want read.................. 0
SSL write attempts to want write................. 0
SSL write got default error...................... 0
SSL write max data length sent................... 0
SSL write max attempts to write in loop.......... 0
SSL read returned zero........................... 0
SSL read attempts to want read................... 0
SSL read attempts to want write.................. 0
SSL read got default error....................... 0
Failed SSL read - Con Rx buf freed............... 0
Failed SSL read - Con/SSL freed.................. 0
Max records read before exiting SSL read......... 0
--More-- or (q)uit
Highest Prio Tx Q full........................... 0
Normal Prio Tx Q full............................ 0
Highest Prio Tx Q Sent........................... 0
Normal Prio Tx Q Sent............................ 0
Highest Prio Tx Q count.......................... 0
Normal Prio Tx Q count........................... 0
Messages sent by APPs to Highest Prio TxQ........ 0
Max Measure Notify Msg........................... 0
Max Info Notify Msg.............................. 0
Max Highest Prio Tx Q Size....................... 0
Max Normal Prio Tx Q Size........................ 0
Max Rx Size...................................... 1
Max Info Notify Q Size........................... 0
Max Client Info Notify Delay..................... 0
Max Rogue AP Info Notify Delay................... 0
Max Rogue Client Info Notify Delay............... 0
Max Client Measure Notify Delay.................. 0
Max Tag Measure Notify Delay..................... 0
Max Rogue AP Measure Notify Delay................ 0
Max Rogue Client Measure Notify Delay............ 0
Max Client Stats Notify Delay.................... 0
Max RFID Stats Notify Delay...................... 0
RFID Measurement Periodic........................ 0
--More-- or (q)uit
RFID Measurement Immediate....................... 0
SSL Handshake failed............................. 1319
NMSP Rx detected con failure..................... 0
NMSP Tx detected con failure..................... 0
NMSP Tx buf size exceeded........................ 0
NMSP Tx Invalid msg id .......................... 0
Reconnect Before Conn Timeout.................... 0
Rogue AP Info Changed DB Full.................... 0
Rogue AP Meas Changed DB Full.................... 0
Rogue Client Info Changed DB Full................ 0
Rogue Client Meas Changed DB Full................ 0
Looking around the Internet we found a similar case where the issue was solved dealing with the authorization list upon the wireless lan controller but after the suggested check we saw that the MSE is correctly authorized inside the controller: Here's the "show auth-list" on the WLC:
(Cisco Controller) >show auth-list
Authorize MIC APs against AAA ................... disabled
Authorize LSC APs against Auth-List ............. disabled
APs Allowed to Join
AP with Manufacturing Installed Certificate.... no
AP with Self-Signed Certificate................ no
AP with Locally Significant Certificate........ no
Mac Addr                  Cert Type    Key Hash
00:0c:29:68:c8:57         LBS-SSC      6d6703ef9cccfb5a430e04b3ad128f8170fb435c
that perfectly matches what was on the MSE:
cmd> show server-auth-info
invoke command: com.aes.server.cli.CmdGetServerAuthInfo
AesLog queue high mark: 50000
AesLog queue low mark: 500
Server Auth Info
MAC Address: 00:0c:29:68:c8:57
Key Hash: 6d6703ef9cccfb5a430e04b3ad128f8170fb435c
Certificate Type: SSC
Finally I tried to look around the MSE logs and here what I found tailing the locserver errors:
==> /opt/mse/logs/locserver/locserver-error-0-0.log <==
11/17/12 17:54:13.513 ERROR[locp] [36] Error in ConnectHandler(endPoint) <LocpSessionTarget mode=CLIENT><LocpEndPoint status=HANDSHAKE totalBytesSent=72000 totalBytesReceived=1315800><LocpEndPoint.Key host=10.0.1.249 port=16113/></LocpEndPoint></LocpSessionTarget>
11/17/12 17:54:13.513 ERROR[com.aes] [36] [ConnectHandler:handle-09] THROW
javax.net.ssl.SSLHandshakeException: General SSLEngine problem
        at com.sun.net.ssl.internal.ssl.Handshaker.checkThrown(Handshaker.java:1015)
        at com.sun.net.ssl.internal.ssl.SSLEngineImpl.checkTaskThrown(SSLEngineImpl.java:485)
        at com.sun.net.ssl.internal.ssl.SSLEngineImpl.writeAppRecord(SSLEngineImpl.java:1128)
        at com.sun.net.ssl.internal.ssl.SSLEngineImpl.wrap(SSLEngineImpl.java:1100)
        at javax.net.ssl.SSLEngine.wrap(SSLEngine.java:452)
        at com.aes.server.locp.transport.IOChannelSecure.doHandshake(IOChannelSecure.java:230)
        at com.aes.server.locp.transport.LocpTransportService$ConnectHandler.handle(LocpTransportService.java:354)
        at com.aes.server.locp.transport.ChannelEventDispatcherImpl$HandlerTask.run(ChannelEventDispatcherImpl.java:348)
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
        at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
        at java.util.concurrent.FutureTask.run(FutureTask.java:138)
        at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
        at java.lang.Thread.run(Thread.java:662)
Caused by: javax.net.ssl.SSLHandshakeException: General SSLEngine problem
        at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
        at com.sun.net.ssl.internal.ssl.SSLEngineImpl.fatal(SSLEngineImpl.java:1528)
        at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:243)
        at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:235)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1206)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:136)
        at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
        at com.sun.net.ssl.internal.ssl.Handshaker$1.run(Handshaker.java:533)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sun.net.ssl.internal.ssl.Handshaker$DelegatedTask.run(Handshaker.java:952)
        at com.aes.server.locp.transport.IOChannelSecure.doTasks(IOChannelSecure.java:265)
        at com.aes.server.locp.transport.IOChannelSecure.doHandshake(IOChannelSecure.java:193)
        ... 8 more
Caused by: sun.security.validator.ValidatorException: No trusted certificate found
        at sun.security.validator.SimpleValidator.buildTrustedChain(SimpleValidator.java:346)
        at sun.security.validator.SimpleValidator.engineValidate(SimpleValidator.java:111)
        at sun.security.validator.Validator.validate(Validator.java:218)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
        at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
        at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1185)
        ... 15 more
Everything seems to bring to a certificate error but I don't know, from a side if this is the right direction of investigfation and, from the other, where to check for this certificate and how to find a solution.
May someone give us some help?
Thank in advance to all.
Regards.
Marco

Hi Pongsatorn,
This is caused by a bug with the ID - CSCub42987. And yes, it only applies to the Virtual WLC's.
Here is the work-around: (need to be performed from the CLI of the MSE as follows)
1. cmdshell
2. config unauthenticated-nmsp true
3. exit
4. service msed restart
Ram.

Virtual WLC on VMWare ESXi 4.0

Hi team,
I am currently trying to install a Virtual WLC (latest 7.5 release) on a VMWare ESXi 4.0, I am using the OVF template to deploy the image, but when booting the VM I am prompted with a "No operating system found" error.
Just to make sure there was no problem with the OVA file, I also downloaded the 7.4 release image, but I get the same error.
Note that I did the exact same procedure in our lab a few days ago, with the 7.5 image, BUT a ESXi 4.1, and it worked perfectly. Is there any incompatibility with ESXi 4.0? The deployment guide speaks of 4.x/5.x, but I am wondering if it was tested against 4.0 ... Unfortunately the 4.0 release is a customer deployment in production, we can´t change the VMWare version.
Are there any settings I could change on the VM to make this work?
I noticed the system creates a small ISO file (44Kb) when powering the VM on, but it disappears when powering off. Not sure if that´s the expected behavior.
Any guidelines on how to move forward would be appreciated!
Thanks
Javier

Kindly following the link given for the ova file deployment
http://www.cisco.com/en/US/products/ps12723/products_tech_note09186a0080bd2d04.shtml
as I agree that not all the ova files can be corrupted make sure you use the option of “deploy ova Template” in vshpere client

Virtual WLC on VMWare vCloud - No Operating System Found

Hi,
Trying to install/deploy a virtual WLC image (7.6) on a VMWare virtual Cloud Domain (VCD) environment.
The OVF deployment runs just fine, but as soon I am booting up the image, VMWARE is stating "No Operating System found".
What am I doing wrong?
/Sijbren

Fixed this one.
In VMWARE Cloud Directory you do not have access to the directory structure.
In a "normal" VMWARE environment the OVA file is correctly deployed including mounting a bootable ISO as CDROM disk. This does not happen in VCD.
To fix this, you must manually upload the ISO and mount it to the VM in VCD.
The ISO can only be recovered from a regular VMWARE OVA deployment.

Final Cut Pro issues in Lab environment

Ok so this one has me completely buggered.
I manage about 6 Mac Pros in a small TV Studio/Editing lab at a university. The Mac Pros are managed with an Xserve running server 10.6.2, using Open Directory for account management. All network accounts use a network Home folder, so any machine can use the same account and settings. The same server also manages a 25 machine iMac lab environment.
Each semester, we wipe the Mac Pros clean an reinstall the OS and Final Cut Studio. Last semester, the Mac Pros were upgraded to 10.6, and Studio 3 and we had no issues. This semester, a fresh installation of 10.6 was installed, as well as fresh Studio 3.
Now this is the problem we are having. Final Cut Pro 7 will not correctly create .fcp project files when users are logged in with their network server accounts. If you save the project to the desktop, or anywhere else in the Home folder, it creates a .fcp file, seemingly normal. But after the project is closed, the .fcp will not open again. Further more, a quick file size check shows the .fcp files are zero KB. Opening with Textedit shows an empty document, not even a single bit of data shows up.
But, Final Cut Pro 7 will create .fcp files perfectly fine on the local disk, or firewire drives. Local accounts also work fine. This problem only happens on network homes.
This is severely hampering the workflow for students using these editing stations, as they can't use their network home folders to save any data in Final Cut.
The strangest part, is it worked fine last semester. The same machines were running 10.6 and Studio 3, and the server has not been changed at all.
Any clues?

No problem Tom!
I didn't checked before but i solved thanks to your post... for some strange reason, the French language that i don't use, appeared in my language preference pane. I just added the English, and moved/deleted the French after it and FCP became English again!

Program associated with the creation of a virtual instrument of Lab View. Please help me

I have a question with program associated with the creation of a virtual instrument of Lab View. 1.Create of virtual instrument based on the NI 9401 module fitted to the chassis NI Compaq DAQ (Ni-cDAQ-9172). Creating a virtual tool needed to implement the following counting impulses in impulse series, visualization of data through a digital indicator, comparing the number of impusite with pre-set value, that value can be assigned by the user. Indicator light when reaching in reaching the set number of pulses, the opportunity to reset the meter of a button on the front panel. Switch to digital output in reaching the set number. I hope someone can help me.
Solved!
Go to Solution.

What is your question? You've described what the program is supposed to do, but it's not clear what you're asking about. Do you need help getting started? If so, have you gone through the LabVIEW tutorials? You and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free. Have you looked through the many examples that ship with LabVIEW for data acquisition?

Windows 8 App Deployment in School Lab environment?

After doing some reading and research on Windows 8 Store app deployment from sources like
http://www.microsoft.com/en-us/download/details.aspx?id=39685 and this forum and I am getting pretty depressed. Here is one part of my scenario which is pretty simple I think.
Lab of 20 Dell 3011 AIO Touchscreens that were depoyed with Win8Ent via MDT2012U1. For simplicity I will talk about a subset of my problem. I have 3 classes of Kindergartners who use the lab. The students aren't capable of really logging
in themselves so the teacher logs them all in to a shared account for each class since all they do is web / app stuff. I don't want to create 60 accounts for this young of kids since they can't handle the process anyway.
Here is my understanding of what I would have to do if I wanted to install Fresh Paint (a great free app) for all the students to use.
1. Create a minimum of 4 Microsoft accounts due to device limits of store app install.
2. Assign / attach those Microsoft accounts to specific lab machines (while logged in as each shared student account).
3. Login to each of my 20 lab machines as each of the 3 share accounts (which can't have roaming profile since Windows <-> Microsoft account association now needs to be unique). This would be a minimum of 60 individual logins for this one
app and one grade.
4. Install the app on a per user / per device basis.
5. Potentially repeat process any time an update is released since the students can't handle it themselves.
I think this is the majority of the process, am I leaving any important steps or details out? This sounds like it would be HOURS of work to install ONE app for ONE grade. I could potentially need 5-10 unique apps per grade.
This just isn't feasible on any type of scale. Even this limited amount of devices / users is overkill when dealing with users who are to young to maintain their own devices or exist in lab environment. In reading the doc refrenced above it doesn't
seem like there is a solution for this offered by MDT, SCCM or Intune? Please tell me I am missing the magic deploy button? Also I don't even want to begin to think about apps that aren't free and managing that.
Thanks for any helpful info.
Brian Hoyt

In reading the doc refrenced above it doesn't seem like there is a solution for this offered by MDT, SCCM or Intune? Please tell me I am missing the magic deploy button?
No, you're not missing the magic deploy button :(
If a Windows Store App (aka Modern UI app aka Metro App) is offered via the Windows Store, and not offered directly by the application developer, the only legitimate way to get that app is via the Store, and that requires an MS account.
ConfigMgr offers two "deployment" methods;
a) deep-link into the web-based Windows Store. The logged-on user must have an MS account and use that account to authenticate to the store. even if the app is free.
b) sideload. requires the appx installation package.
There are some other suggestions, but they are unsupported, and rather complicated:
http://social.technet.microsoft.com/Forums/windows/en-US/763dc3d6-8dd2-4157-8f49-159f0826e97a/install-windows-store-apps-to-all-users-or-where-to-get-the-appx
http://social.technet.microsoft.com/Forums/windows/en-US/04dd1938-a558-4cbe-ba70-b89d2d1eb95c/windows-apps-offline-download-and-install
http://social.technet.microsoft.com/Forums/windows/en-US/72ccc40d-76aa-4325-92ae-27386b424e0f/sideloading-applications#bddbcd7f-fec3-4132-b573-b5e3d1aef57f
http://social.technet.microsoft.com/Forums/windows/en-US/b7574287-d134-4a74-b227-f3dd793ab46b/download-appx-package#64745402-2254-4760-bc1f-f7483fc49d35
The last time I spoke with our MS contacts (deployment engineers @ MS), even those guys can't get the MS free apps to sideload.
All the documentation around sideloading appears to be catering for situations where a company has developed that app themselves, or, has commissioned a developer to create a custom app for the company.
Apps which are offered via the Store, seem to only be available via the store. I'm not sure if there is some kind of contractual obligation with MS which demands this? (i.e. in the store means no distribution via other means?)
At this time there are no options to federate an on-premises AD to the Store either. Which would be a nice option, even if it limited the user to free apps.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

URGENT HELP WITH VIRTUAL WLC

We had a problem with Virtual Machine which Cisco Virtual WLC installed. Virtual Machine files were damaged and the system was not start normally. We have had to reinstall the WLC, but after installation impossible to import current license to new one.
how can we install this licence again?

Licenses are tied to the device they're being used on. With a virtual WLC, the license is tied to the unique identifier of the vWLC and when you recreated the vWLC after your VMware problems the new vWLC has a different unique identifier.
It's a similar situation to what happens when a physical controller is faulty and is swapped out by cisco, the replacement will have a different serial number and you'd have to re-host the license to the new serial number.

How to export an exchange 2007 owa certificate from production to lab environment

I'm setting up an Exchange 2007 Lab but I have a trouble regarding exchange's certificate
Note: My lab environment is not conected to internet
I've followed the next link but it doesn't work
https://www.digicert.com/ssl-support/pfx-import-export-exchange-2007.htm
Once I finished all the steps if I run the next powershell command get-excahangecertificate I see that my exchange certificate has the status as unknown
I'm not sure if the problem is related with the server is not conected to internet, so exchange is not be able to check the status of the certificate.
I've tried to turn off the Check for publisher’s certificate revocation option on the server
To do this, follow these steps.
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Click to clear the Check for publisher’s certificate revocation check box, and then click OK.
After the update rollup installation is complete, turn on the Check for publisher’s certificate revocation option.
But it still not working
Could anyone help me?
Thanks in advance

Hi Pardo,
According to your description, I understand that the exchange certificate cannot work and display unknown status after import it.
If I misunderstand your concern, please do not hesitate to let me know.
Depending on the results of “Get-ExchangeCertificate | FL”, please pay attention to following points:
1. RootCAType: Registry
“An internal, private PKI root CA that has been manually installed in the certificate store.”
2. Status: Unknown
“This status generally indicates that the status of the certificate cannot be verified because the certificate revocation list (CRL) is unavailable or this server cannot connect to it.”
The reason why it failed is that internal Exchange server cannot connect to CRL. As you mentioned, exchange can’t be able to check the status of the certificate.
More information about Certificate Use in Exchange Server 2007, please refer to
Certificate Fields and Configuring Access to the Certificate Revocation List
section in below link:
http://technet.microsoft.com/en-us/library/bb851505(v=exchg.80).aspx
However, we can renew a certicate from local CA:
http://technet.microsoft.com/en-us/library/bb310781(v=exchg.80).aspx
Best Regards,
Allen Wang

Possible to create desktop shortuts in a computer lab environment?

Is there anyway to create shortcuts to different webpages on a desktop in a computer lab environment where any time a person logs on, the shortut is on their desktop? There are way to many users to try to set this up on every persons profile so, this needs to show up on the desktop reguardless of who logs on.

This is a duplicate. See my earlier reply at http://discussions.apple.com/message.jspa?messageID=1288976#1288976

Setting up a Service Manager Lab environment with prod. data

Hi
I´m about to set up a lab environment with production data. I´m following the guide here; https://technet.microsoft.com/en-us/library/jj900180.aspx
I have a question regarding the Management Group. The Lab environment will have the same Management group name. In the guide nothing is mentioned about changing the name of the management group.
Will this be a problem when i fire up the Lab environment?
/Regards

Well in the guide https://technet.microsoft.com/en-us/library/jj900180.aspx states that you should
install a secondary management server and stop the services, backup prod. db, restore prod db on the secondary server (lab-server), change a bunch of rows in different tables.
So naturally it will have the same management
group name.
Am i missing something?

SNMP OID for AssociatedAPs in Virtual WLC 7.4.100.0

Hello Guys!
I need you help for something that I need to do to monitor my Wi-FI network.
I'm using a Virtual WLC (SW Ver 7.4.100.0) where most that 30 APs are associated with, but I would like to monitor each disaciossiation of APs using SNMP. After some search, I have found this OID .1.3.6.1.4.1.14179.2.1.1.1.38 on some forums but it doesn't work, I see random number in my monitoring tool.
Do you know if there is any another OID to use with this software version or maybe if I have to upgrade to ver7.6 or ver8?
Thanks in advance,
Kevin

I'm assuming you don't own a license for Cisco Prime Infrastructure
One thing you can do is send SNMP traps to your monitoring software from the WLC (I've never used virtual WLC but my assumption is most options are the same. If your software doesn't support SNMP Traps consider a different monitoring software...
Go to Management > SNMP > Trap Receivers and set up your receiver
Then to to Management > SNMP > Trap ControlsHere is where you set what traps are sent via SNMP. If you see the "AP" tab you can set several things.
If you only want to see if an AP is dropping off the network and the above doesn't work, you could just put dhcp reservations on your APs and have your software ping it. This of course is only if its off network, not if it simply disassociates.

Customer's lab environment.

Hi All,
I am currently planning a lab environment for my customer that will allow us to test scenarios, upgrades, bugs, etc.
The lab will contain the following collaboration apps- CUCM, CUC, CUP, UCCX (all v8.x)
I went through my ordering options and found that i have few "lab" license options for CUCM and CUC
1. NFR. since this is a customer lab environment i can't use this option..
2. Non Production. This is a good option but this license actually prevents you from upgrading.
now this makes no sence to me. one of the major things one would like to check in his lab is upgrades, and without this option it's not a proper lab solution as i see it.
UCCX is a different story as the ordering guide mentiones that for non prod environments one should order as if it is a new product.
Does anyone have any ideas regarding an operationally practical lab environment?

Hi All,
I am currently planning a lab environment for my customer that will allow us to test scenarios, upgrades, bugs, etc.
The lab will contain the following collaboration apps- CUCM, CUC, CUP, UCCX (all v8.x)
I went through my ordering options and found that i have few "lab" license options for CUCM and CUC
1. NFR. since this is a customer lab environment i can't use this option..
2. Non Production. This is a good option but this license actually prevents you from upgrading.
now this makes no sence to me. one of the major things one would like to check in his lab is upgrades, and without this option it's not a proper lab solution as i see it.
UCCX is a different story as the ordering guide mentiones that for non prod environments one should order as if it is a new product.
Does anyone have any ideas regarding an operationally practical lab environment?

Cisco LAP 2602 can not join Virtual WLC

dear all,
i just install Virtual WLC and i remove WLC 2504 , i install & configured it , but LAP can not join. it was work fine with WLC 2504.
i used the same network topology with the old WLC.
i receive this error logs.
*spamApTask4: Feb 04 06:01:30.082: <<<< Start of CAPWAP Packet >>>>
*spamApTask4: Feb 04 06:01:30.082: CAPWAP Control mesg Recd from 10.192.200.93, Port 26711
*spamApTask4: Feb 04 06:01:30.082: HLEN 4, Radio ID 0, WBID 1
*spamApTask4: Feb 04 06:01:30.082: Msg Type : CAPWAP_DISCOVERY_REQUEST
*spamApTask4: Feb 04 06:01:30.082: Msg Length : 155
*spamApTask4: Feb 04 06:01:30.082: Msg SeqNum : 0
*spamApTask4: Feb 04 06:01:30.082:
*spamApTask4: Feb 04 06:01:30.082: Type : CAPWAP_MSGELE_DISCOVERY_TYPE, Length 1
*spamApTask4: Feb 04 06:01:30.082: Discovery Type : CAPWAP_DISCOVERY_TYPE_UNKNOWN
*spamApTask4: Feb 04 06:01:30.082:
*spamApTask4: Feb 04 06:01:30.082: Type : CAPWAP_MSGELE_WTP_BOARD_DATA, Length 62
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083: WTP_SERIAL_NUMBER : AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_DESCRIPTOR, Length 40
*spamApTask4: Feb 04 06:01:30.083: Maximum Radios Supported : 2
*spamApTask4: Feb 04 06:01:30.083: Radios in Use : 2
*spamApTask4: Feb 04 06:01:30.083: Encryption Capabilities : 0x00 0x01
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_FRAME_TUNNEL, Length 1
*spamApTask4: Feb 04 06:01:30.083: WTP Frame Tunnel Mode : NATIVE_FRAME_TUNNEL_MODE
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_MAC_TYPE, Length 1
*spamApTask4: Feb 04 06:01:30.083: WTP Mac Type : SPLIT_MAC
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 10
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083:
IE : UNKNOWN IE 207
*spamApTask4: Feb 04 06:01:30.083: IE Length : 4
*spamApTask4: Feb 04 06:01:30.083: Decode routine not available, Printing Hex Dump
*spamApTask4: Feb 04 06:01:30.083: 00000000: 03 00 00 01 ....
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 12
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083:
IE : RAD_NAME_PAYLOAD
*spamApTask4: Feb 04 06:01:30.083: IE Length : 6
*spamApTask4: Feb 04 06:01:30.083: Rad Name :
*spamApTask4: Feb 04 06:01:30.083: CEO_AP
*spamApTask4: Feb 04 06:01:30.083: <<<< End of CAPWAP Packet >>>>
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Request from 10.192.200.93:26711
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 ApModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 04 06:01:30.083: apModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: apType = 26 apModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: apType: Ox1a bundleApImageVer: 8.0.110.0
*spamApTask4: Feb 04 06:01:30.083: version:8 release:0 maint:110 build:0
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Response sent to 10.192.200.93 port 26711
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Response sent to 10.192.200.93:26711
Please any help.

dear
yes the wlc 2504  is 8.0.110 but because its damaged i replaced it with new vWLC v 8.0.110.
also i can not put the LAP in flexconnect until its joint.

Service Manager 2010 lab environment syncing with production database

I am trying to setup a lab environment for SCSM 2010 to test the upgrade to SCSM 2012. I have been following the instructions found here:
http://technet.microsoft.com/en-us/library/hh914226.aspx
I have successfully made it to step 16. However, when I open the SCSM console in the lab environment it still shows the Data Warehouse and Reporting buttons. When I create a new ticket in either the lab or production environment it shows up in both consoles,
even though the production console is connected to the production server and the lab console is connected to the lab server.
Any ideas on why the lab environment is still syncing with the production server?
Thanks

Thread of the Necro-Dancer:
Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server.
i would recommend, however, that you use
the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
with minimal overhead.
I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
http://codebeaver.blogspot.dk/

Virtual WLC in LAB environment

Similar Messages

Maybe you are looking for