Virtualbox on windows host: how to install guest addtional
Hi all:
do i need to install the vbox kernel modual ?
can anyone point me some howto ?
there are quite a lot of documents on vbox on Linux host
i can't seem to find doc with a windows host
thanks
The host doesn't matter for installing guest additions.
If Linux is the guest os, just follow these instructions:
http://wiki.archlinux.org/index.php/Vir … _Additions
Similar Messages
-
Virtualbox on windows host: which video driver to choose ?
Hello all:
i have installed archlinux on my vista box through vbox
well next step is to install X
but i dont know which video driver to choose
when i do lspci |grep VGA
i get
VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox ...
so which driver does this correspond ?
my laptop has a ATI cardthanks but can you tell me how to install that guest additions ?
i noticed there's a menu item for that
but nothing happens when i click it -
How to install guest OS on Oracle VM???
Hello, can anybody teach me how to install the guest OS on the Oracle VM?
currently i installed the Oracle VM server 2.1.5
Then i need to install Windows XP as the guest os on my machine..
So, can any expert teach me step by step to install Linux on Oracle VM server??
the coding is very need!
Thanks alot!!
notes: i need to install XP by using CD
Edited by: user11339612 on Jul 2, 2009 6:07 AMIt would not make much sense to give instructions on every specific OS. Basically, all you do is follow the directions to install a hardware virtualized vm. The OS you choose to install is not important. The steps in creating to VM and pointing it to the install media (windows cd) are important. Once the vm starts up and boots off the windows xm cd, you will complete the install via vnc connection (console)
I installed virt-manager on my utility server to aid in getting on the console of my vm's without having to use the vm manager
~mike~ -
TX1410US and Windows 7 - How To Install Drivers?
How do I install the drivers for the following components of a Pavilion TX1410US notebook under Windows 7:
- Wi-fi connection hardware
- The buttons on the screen (incl. the media keys there - because those aren't responding)Hi,
Use Vista drivers for your specific model. Most of them will work. You may find them here.
First thing which you should install is chipset driver:
NVIDIA nForce Chipset/Network Drivers here
Important note!
You will need to reboot your system after installing chipset driver.
It's recommended to install all Windows Updates.
Why? AMD machines with nVidia graphic cards are very quickly overheated after installing Windows 7. This simple solution will fix this problem. You will need to install as quick as possible graphic driver. Which is available through Windows Update too.
Resource:
Install Windows updates
How to find graphic driver?
1.Open Windows Update by clicking the Start button , clicking ' All Programs ', and then clicking ' Windows Update '.
2.In the left pane, click ' Check for updates ' , and then wait while Windows looks for the latest updates for your computer.
3.Select the ' Optional Updates ' and install from there only driver for Your graphic card.
Some more up to date drivers / software for Windows 7:
HP QuickPlay here (ver 3.7 v.6112 for 32/64 bit Win7)
Notes:
It must be installed before HP Quick Launch Buttons.
You've installed this software and it hangs while using?
Uninstall your current HP QUICK PLAY version and install this which you had in Vista.
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
If you burned CD/DVD with C:\swsetup folder before upgrade to Windows 7 then you will find Vista version there.
HP Quick Launch Buttons here (ver 6.50.17.1 for 32/64 bit Win7)
HP Wireless Assistant here (ver 3.50.12.1 for 32/64 bit Win7)
Ps.
If you will have still problems with finding any driver then let me know about it.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Hi,
I have the dvd for adobe creative suite 5.5 web premium, I see a set-up.exe for windows, but how do I install this software on my macbook please?
Thank you
EYou can't one way or the other. Serial numbers are platform specific and platform swaps only apply to current versions, meaning you have to upgrade to CS6 and make the switch.
Mylenium -
Hello everyone,
I recently installed VirtualBox on my Arch Linux install to tinker with GitLab on a Debian VM. I've set up a standard VM running Debian (wheezy) and made sure it's network settings were set to "NAT". However, I am unable to ping or ssh to this VM (which is running an ssh server among other things). Where this gets a bit weirder is that I'm perfectly able to ping and ssh to my host machine (running Arch).
I installed the version of VirtualBox available on the official repos and I'm running on the default kernel too.
I've install VirutalBox by following the infos posted on the wiki. My current user is part of the vboxusers group :
% groups duane
disk lp wheel uucp locate rfkill games network video audio optical floppy storage scanner power users vboxusers
I've added the proper kernel modules to /etc/modules-load.d/virtualbox.conf so that they are loaded automatically on boot time :
vboxdrv
vboxnetadp
vboxnetflt
vboxpci
% lsmod | grep vbox
vboxpci 14581 0
vboxnetflt 17612 0
vboxnetadp 18355 0
vboxdrv 264794 5 vboxnetadp,vboxnetflt,vboxpci
I must also note that the net-tools package is installed.
Now, I get the ip adress of my host :
% ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp9s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether f0:4d:a2:48:5b:38 brd ff:ff:ff:ff:ff:ff
3: wlp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 5c:ac:4c:09:d3:f3 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.22/24 brd 192.168.1.255 scope global wlp4s0
valid_lft forever preferred_lft forever
inet6 fe80::5eac:4cff:fe09:d3f3/64 scope link
valid_lft forever preferred_lft forever
Then I try to ping it from my Debian guest.
user@debian:~% ping 192.168.1.22 -c 3
PING 192.168.1.22 (192.168.1.22) 56(84) bytes of data.
64 bytes from 192.168.1.22: icmp_req=1 ttl=63 time=0.961 ms
64 bytes from 192.168.1.22: icmp_req=2 ttl=63 time=0.722 ms
64 bytes from 192.168.1.22: icmp_req=3 ttl=63 time=0.680 ms
--- 192.168.1.22 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2001ms
rtt min/avg/max/mdev = 0.680/0.787/0.961/0.127 ms
Now I get the ip adress of my guest :
eth0 Link encap:Ethernet HWaddr 08:00:27:77:0e:48
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe77:e48/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69 errors:0 dropped:0 overruns:0 frame:0
TX packets:93 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11577 (11.3 KiB) TX bytes:15395 (15.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
And I try to ping my guest from my host :
% ping 10.0.2.15 -c 3
PING 10.0.2.15 (10.0.2.15) 56(84) bytes of data.
--- 10.0.2.15 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2007ms
There. I hope I didn't give too much information.
I don't really understand what's going on there, usually that workfow works immediately in all the distributions I tried before, and on windows as well. I think I followed all the steps to make this work and yet it doesn't, and I'm not sure this problem is related to VirtualBox itself.
Thanks in advance for any tip or comment on that.
Last edited by Marneus68 (2014-01-24 10:19:39)What I do for all my VB guest VM's is to set 2 network interfaces, one the normal (default) NAT, and the other a host-only interface. That way your guests are completely hidden from the local lan which may be desirable if e.g., your host is a laptop which you move around various places. The guests can access anything outbound and you can still ssh to them from the host (and also, using ssh ProxyCommand via that host if you want to access them remotely).
-
Macbook pro retina, windows 7, how to install it without using optical drive?
Hi,
I am thinking of buying the new macbook pro with retina display.
I do not intend to get and external optical drive.
I want to split the hard disk and install a windows 7 ultimate, which I own and have as an CD image ( ISO file ).
how can I install windows from my ISO without burning it into a CD or creating an external drive? is it possible?Put the iso on a USB thumb drive. Then use Boot Camp Assistant to make the thumb drive bootable. Then follow the instructions in the Boot Camp Installation Guide. http://www.apple.com/support/macbookpro/bootcamp/
You should visit the Boot Camp Forum here https://discussions.apple.com/community/windows_software/boot_camp -
Clean install of windows 7 - how to install drivers from USB memory stick?
I purchased a Toshiba Satellite C50 loaded with windows 8 but want to revert to windows 7.
I have downloaded the necessary drivers and have mounted the .exe files onto a USB pen for installation.
Before I proceed to wipe windows 8 I'd like to know - if I install 7, will my trackpad stop functioning?
If so, how do I install the relevant drivers from the USB pen?
Thanks, John99.9% sure that W7 will identify the trackpad and install it. You just run the exe's using file explorer or Start >Run then browse. You may decide to leave the laptop as the W7 install left it but you should check Device Manager to ensure there are no unrecognised devices
-
Windows 8 (How to Install hyper -v)
Hi Team,
I have installed Windows 8 and trying to install hyper -v but when when i am checking in control Panel /Program and feature/Turn windows feature on or off , i am unable to find hyper -v option in it.
i believe it is not installed when i had installed windows 8, request you please guide me now how can i install it now.
Please drop me a mail: [email protected] or reply to this question. Asap
Thanks
Atul SrivastavaHi Atul Srivastava,
For this issue,Denis Cooper is right.
The following prerequisites are required to successfully run Client Hyper-V on Windows 8.1:
Windows 8 Pro or Enterprise 64 bit Operating System
64 bit processor with Second Level Address Translation (SLAT)
4GB system RAM at minimum
BIOS-level Hardware Virtualization support
You can refer to the article below:
http://blogs.technet.com/b/canitpro/archive/2013/11/05/step-by-step-enabling-hyper-v-for-use-on-windows-8-1.aspx
Regards,
Kelvin Xu
TechNet Community Support -
New computer/windows 7. how to install deskjet 4210, color laserjet cp1510?
I have a new computer with windows 7. None of my printers (Deskjet F4210, Color laserjet CP1510) will install with windows 7.
If you have not downloaded the Windows 7 drivers for the Deskjet F4120 you can get them from the links below.
Deskjet F4210
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-74858-1&cc=us&dlc=en&lc=en&...
For the Laserjet CP1510 you can follow the steps provided on the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796859&cc=us&dlc=en&lc=en&os=4063&product=342...
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem -
Windows 10: how to install Microsoft's new operating system
The tech world is buzzing these days with Windows 10 excitement. The highly anticipated operating system is full of exciting new features and technology. The new OS manages to be familiar yet fresh and powerful, giving you the flexibility to have it work the way you want it to. Many users have already taken steps to upgrade for free, and are loving the changes. You can upgrade today too, and install Windows 10 on your machine. Don’t worry if you’ve never upgraded an operating system before either. I’ll help you along with this handy guide.
When ever I use the media creation tool, I have been stuck at 0% for ages and wont so anything.
-
How to install Oracle spatial in existing 10g database
Hi all,
I am using Oracle 10g 10.2.0.1.0 on Windows.
How to install Oracle spatial in my database.
I tried to do with DBCA with configure database option but in that Oracle spatial is in disabled state.
Please help I am newby to Oracle spatial
-Thanks & cheers
AntonyHi Xaheer,
Thank you very much. I run that script, while running the script in some part its showing some errors.
Could you please tell me whether I have to do some task before executing this script.
-Thanks & Cheers
Antony -
Accounting for Multiple Cygwin Paths for Windows Hosts
Hello everyone,
We are using EM12cR2 (installed on RHEL) but need to monitor a number of Windows hosts. For most Windows hosts, Cygwin is installed in the default path (C:\cygwin) but we also have Citrix XenApp servers that we would like to monitor but they do not have a C: drive, just M:. I've seen the settings file that allows someone to change the Cygwin path but I can't find information on whether or not you can add multiple paths to that line and what that syntax would be. I've also seen an older Citrix plug-in but I don't see anything stating it's compatibility with this version of EM. If I could, I would test out a number of scenarios in a lab environment but we don't have that option.
Does anyone know if it's possible to add multiple Cygwin paths (and what the syntax is), if the Citrix plug-in is compatible with EM12cR2, or if there's another way to do this that I'm not thinking of?
Thank you,
EMSHi ,
you have to update the following properties in $OMS_HOME/oui/prov/ssPaths_msplats.properties to reflect the new cygwin installation location.
eg.
From
SSH_PATH=C:/cygwin/bin/ssh.exe
SCP_PATH=C:/cygwin/bin/scp.exe
MKDIR_PATH=C:/cygwin/bin/mkdir.exe
SH_PATH=C:/cygwin/bin/sh.exe
CHMOD_PATH=C:/cygwin/bin/chmod.exe
TRUE=C:/cygwin/bin/true.exe
To
SSH_PATH=M:/cygwin/bin/ssh.exe
SCP_PATH=M:/cygwin/bin/scp.exe
MKDIR_PATH=M:/cygwin/bin/mkdir.exe
SH_PATH=M:/cygwin/bin/sh.exe
CHMOD_PATH=M:/cygwin/bin/chmod.exe
TRUE=M:/cygwin/bin/true.exe
thanks,
Prakash -
Linux Application Debugging on Windows Host
I want to debug Linux applications using replay debugging with this setup:
Windows Host (Windows 64 bit), VMWare Workstation 7.0
Linux Guest 1 (32bit) for development and running gdb
Linux Guest 2 (32bit) running the application which should be debugged
For simpliciy both guests will use the same Linux distribution to ensure that all libraries are the same.
The idea is to start the vmware-gdb-proxy on the Windows host and connect form guest 1 to the proxy to debug on guest 2.
But there seems to be no vmware-gdb-proxy available for Windows - so my questions
is there a vmware-gdb-proxy avaible (or is it planned to make one available) ?
have I missed something? is there another way to do replay debugging Linux applications on Windows hostt?
Thanks,
ChristianOf course you can.
-
Dear All,
Can you Please tell how to install a software SQL Server 2012 from the Host to my Guest OS Windows Server 2008R2 in my Virtual Machine? I am using VMPlayer and have already created a VM using the Windows Server 2008R2.
I just need help in installing another software (SQLServer2012) from my laptop(guest computer) to my host VM. I also have the files downloaded into my C drive of my laptop(hostcomputer) for the SQL Server 2012. But I am lost as to where to click to install
this software to my VM.
I know I put into Windows Server 2012 forum but I thin the procedure should be similar.
Thank-youthere are few options,
you can copy the files from your host to virtual machine
you can create a iso file and mount it to vm
you can share the source files and access as a share
Darshana Jayathilake
Maybe you are looking for
-
Select List Performance Issue in Apex 3.1.2
Hi It would of great help if you could suggest us for the following We are facing some issues in Select List performance in Apex 3.1.2 version. We have 6 select list and all have been cascaded i.e., values of each select list based on pervious list v
-
Any way to get favicons in Safari 6.0 bookmarks bar yet?
Lack of favicons in bookmarks bar is the #1 reason (of many) why I don't like using Safari....but as long as Chrome continues to have crash issues with rMBP (and now Flash stopped working in the 22.0.1229.2 dev version), I'm stuck with it for some th
-
A/c assignement mandatory in PO.
I want to make a/c assignment category default in PO. In 2 case: While running Auto PO time and creating PO manually. In this two cases how I need to make default , Can u please let me know.. Thnx Regards Sk
-
hi i need query like Employee Group Employee Sub Group Personal Data Attribute (disability) Full Time Part Time FTE i kept employee group sub group disability at rows and full and part time at columns no i want calculate Disability
-
Edge Animate and PhoneGap Build
I'm using Edge Animate together with PhoneGap Build to make an iPhone app. There are several buttons that should scroll up and down and yet remain "tap-able" What is the best way to achieve scrolling effect for button?