Virtualbox question about what happsns "after" updating kernel. SOLVED

I had virtual box working (64bit) from puel/aur perfectly... then there was a kernel update and then when i went to bootup the virtual machine (the virtualbox gui worked fine), the VM screen went black and the entire computer/mouse froze solid, had to do a hard reboot..
was there or should I ask "is there" a command i should re-issue after the kernel updates? i'm thinking it has something to do with the virtualbox kernel module.. but i'm not sure..
i've read the info about virtualbox in the wiki... couldnt find much based on what i'm trying to ask in here..
any help/suggestions would be most appreciated..
thanks
Last edited by binskipy2u (2010-02-11 21:40:13)

When you installed aur/virtualbox_bin, the following post-install message was displayed:
Run "vbox_build_module" as root every time your kernel is upgraded, to compile the module for the new kernel version.
You can confirm this by checking your pacman log and/or by reading /var/lib/pacman/local/virtualbox_bin-<version>/install.

Similar Messages

TS2446 I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

Error after updating kernel 640U patch to 247

Hi Forum,
There are some repetitive errors after updating kernel 640U patch to 247:
======================================================
X Sun Feb 22 07:01:01 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:08 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
X Sun Feb 22 07:01:19 2009
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
X
======================================================
Please help.
Regards,
Agoes
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AM

Hello Agoes,
You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
Please refer to not 1239685 for more info
So no issues
cheers
Rohit

Arch freezes after about 10 minutes with new kernel [SOLVED]

As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
I don't get any kind of error message (oh really?), so what's the problem..?
Last edited by Exitium (2008-10-22 15:29:27)

juan_sck wrote:
Exitium wrote:
test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
Did you make a new install or just updated?
You can try to reinstall old kernel with:
pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
if you made a new install you may have to install the xorg keyboard driver and so.
By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
Also check /var/log/ folder for errors.
Updated kernel.
And as I said, I'll check the driver later.

My imovie had a question mark over it after updating and now imovie is gone.

After updating my imac the imovie icon had a question mark superimposed on it, after clicking on it it disappeared and now imove is gone, how do I retrieve it?

What did you update from and to and how old is the version of iMovie you have?
Sounds like the iMovie you have there is a PPC app which is no longer supported in Lion or Mountain Lion. If that is the case you will need to purchase a new version of the app.

Problem After Update Kernel Version.

I have Problem after update my Xperia Z kernel version. When I upload or share some photos using "Xperia For Facebook" it is start to upload and finish without any problem. But the problem is i Can't see those photos in my Facebook Account .
pls help me.

*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

What next after updating the Ipad?

I have now managed to reconnect my Ipad after updating it and I have lost some of my photos, all of my music, and all of the apps which I have both paid for and which were free. How do I get those back, surely I don't have to pay again do I?

Download past purchase
http://support.apple.com/kb/HT2519

HAL seems to have broken after update. (SOLVED)

I'm not sure what happened, but after updating arch recently CD's, DVD's, and USB drives/sticks are not available. They "seem" to mount themselves as before, as they show up in gnome, but they are inacessible, clicking on any icon for them brings nothing up.
Sorry for the cryptic nature of this post, I'm not even sure where to begin looking in the logs for whatever error/warning might point me in the right direction. Can someone kindly tell me what I should be checking to resolve this? Thanks!
Last edited by jeremyrainman (2009-04-18 15:32:26)

Using a:
$ hald --daemon=no --verbose=yes
I get lots and lots and lots of verbage. HAL is running fine apparently, as it's monitoring my UPS just fine
Here's what I get when I try to open a USB drive that is attached and has an icon in gnome:
08:06:21.680 [W] ci-tracker.c:366: Error doing GetSessionForUnixProcess on ConsoleKit: org.freedesktop.ConsoleKit.Manager.GeneralError: Unable to lookup session information for process '9060'
08:06:21.680 [i] hald_dbus.c:5176: OK for method 'Mount' with signature 'ssas' on interface 'org.freedesktop.Hal.Device.Volume' for UDI '/org/freedesktop/Hal/devices/volume_uuid_9C24133024130CC0' and execpath 'hal-storage-mount'
08:06:21.680 [i] hald_dbus.c:4062: no need to enqueue
Run started hal-storage-mount (0) (1)
! full path is '/usr/lib/hal/hal-storage-mount', program_dir is '/usr/lib/hal'
9061: XYA attempting to get lock on /media/.hal-mtab-lock
9061: XYA got lock on /media/.hal-mtab-lock
device = /dev/sdb1
invoked by uid = 1000
invoked by system bus connection = :1.193
label 'FreeAgent Drive' uuid '9C24133024130CC0'
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry 'none'
/etc/fstab: device none -> none
Looking at /etc/fstab entry '/dev/cdrom'
/etc/fstab: device /dev/cdrom -> /dev/dev/cd/cdrom-6:0:0:0
Looking at /etc/fstab entry '/dev/dvd'
/etc/fstab: device /dev/dvd -> /dev/dev/cd/dvd-6:0:0:0
Looking at /etc/fstab entry '/dev/fd0'
/etc/fstab: device /dev/fd0 -> /dev/fd0
Looking at /etc/fstab entry '/dev/sda1'
/etc/fstab: device /dev/sda1 -> /dev/sda1
Looking at /etc/fstab entry '/dev/sda2'
/etc/fstab: device /dev/sda2 -> /dev/sda2
Looking at /etc/fstab entry '/dev/sda3'
/etc/fstab: device /dev/sda3 -> /dev/sda3
mount_point = 'FreeAgent Drive'
mount_fstype = ''
mount_options = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8 '
trying dir /media/FreeAgent Drive
given_options[0] = 'locale=LC_CTYPE=en_US.utf8;LC_NUMERIC=en_US.utf8;LC_TIME=en_US.utf8;LC_COLLATE=C;LC_MONETARY=en_US.utf8;LC_MESSAGES=en_US.utf8;LC_PAPER=en_US.utf8;LC_NAME=en_US.utf8;LC_ADDRESS=en_US.utf8;LC_TELEPHONE=en_US.utf8;LC_MEASUREMENT=en_US.utf8;LC_IDENTIFICATION=en_US.utf8'
allowed_options[0] = 'locale='
allowed_options[1] = 'dmask='
allowed_options[2] = 'fmask='
allowed_options[3] = 'ro'
allowed_options[4] = 'sync'
allowed_options[5] = 'dirsync'
allowed_options[6] = 'noatime'
allowed_options[7] = 'nodiratime'
allowed_options[8] = 'noexec'
allowed_options[9] = 'quiet'
allowed_options[10] = 'remount'
allowed_options[11] = 'exec'
using action org.freedesktop.hal.storage.mount-removable for uid 1000, system_bus_connection :1.193
08:06:21.695 [i] device.c:1894: Removing locks from ':1.195'
08:06:21.695 [i] device.c:1894: Removing locks from ':1.194'
pid 9061: rc=1 signaled=0: /usr/lib/hal/hal-storage-mount
08:06:21.696 [i] hald_dbus.c:4086: No more methods in queue
08:06:21.696 [i] hald_dbus.c:4149: failed with 'org.freedesktop.Hal.Device.PermissionDeniedByPolicy' 'org.freedesktop.hal.storage.mount-removable no <-- (action, result)'
08:06:21.696 [D] hotplug.c:453: events queued = 0, events in progress = 0
08:06:21.696 [D] hotplug.c:458: Hotplug-queue empty now ... no hotplug events in progress
08:06:21.784 [i] device.c:1894: Removing locks from ':1.197'
08:06:21.788 [i] ci-tracker.c:212: Removing CICallerInfo object for :1.193
08:06:21.788 [i] device.c:1894: Removing locks from ':1.193'
[9056]: 08:06:25.013 [i] addon-storage.c:354: Checking whether device /dev/sr0 is locked on HAL
[9056]: 08:06:25.013 [i] addon-storage.c:362: ... device /dev/sr0 is not locked on HAL
08:06:51.791 [i] device.c:1894: Removing locks from ':1.196'
I tried looking up org.freedesktop.Hal.Device.PermissionDeniedByPolicy and couldn't find anything. Any suggestions?

Question about the new JAVA Update J2SE 5.0 Release 3

Here is some info about this update:
Java 2 Platform, Standard Edition (J2SE) 5.0 Release 3 allows applications and applets developed for the J2SE 5.0 platform to run on Mac OS X v 10.4.2 and later.
This update does NOT CHANGE the DEFAULT VERSION of Java on your Mac from Java 1.4.2 to J2SE 5.0, though Java applications that require J2SE 5.0 may specifically request it. You can change the preferred Java version for applications and applets by using the new Java Preferences utility. This utility is installed by the J2SE 5.0 update at /Applications/Utilities/Java/J2SE 5.0/.
http://docs.info.apple.com/article.html?artnum=302412
HERE IS MY QUESTION---
This update makes me nervous cause I don't know much about Java. IF I change my default version to this new 5.0 will it mean that some of the older Java stuff on the web won't work? Should I just download this and ignore it? What should I do about this update?
Thanks for the help!
Renée

I too seem to be suffering issues with loading web pages after the 10.4.3/Java 5.0 update. I have reinstalled both updates, changed the java settings, emptied all the caches, and tried various combinations thereof, and I still have problems with web pages loaded. most of the problems appear to be related to rendering frames and images - In fact a couple of web sites I navigate to (upon looking at the source for the page" state "It appears your browser does not support frames." I think this is something broken in the latest release. Unfortunately, I cannot reinstall the latest copy of Safari, because the installer states "This version of Safari cannot be installed. It requires version 10.4.2." I guess I am in a pickle until Apple comes out with another update. BTW I have some pages that Safari will not render but IE running on the same box will. I also noticed that the problem propagated to other applications that use Java....For instance the Dashboard widget from google (Google Maps) no longer renders the tiled (framed?) map pieces...instead you get the ubiquitous "?" icon.

Question about Legally Unlocked iPhones & Update 'locking'?

Please forgive me if this has been covered before, as I am a totally newbie in this area.
I have a question regarding legally unlocked iphones:
If I bought an iphone from a country that offered legally unlocked cellphones like Singapore for example, and then used it/patched it up for the first time AFTER bringing it back into the US, would this 'lock' the cellphone to only work in the US, or with ATT?
The reason I ask is due to two points: A) I know that certain countries offer cellphones that were never locked to begin with. B) I have read that after installing the latest patch (2.2.1 I think) in the US, iphones that were previously locked and then unlocked, will be re-locked.
So my question is basically this: What would happen in the event that you update a phone that was never locked to begin with? Would it 'lock' for the first time? Or would it remain unlocked still?
Thank you.

Legally unlocked iPhones have to be updated in the country where they were purchased to guarantee they are not relocked...Every country has their own iTunes -- When you connect to iTunes in the US you are connecting with a US ISP address on your computer. You would have a completely different ISP code in a different country.
Wait to update and see what others are finding before you attempt to update in the US. It is completely within Apple's right to relock phones used within the USA.
This is not the right forum site to get updates on this. A google search will bring up non-Apple websites where you will get up to date information about this.

Logic pro crashes / freezes after running about a hour after updating

Hope anyone can help me.
I use G5 powermac.
Had 10.3.x running with Pro6 with no problems (because of that I'm a big mac fan
I updated to Pro7.2.x and also to OSX 10.4.8 when the problem started
It's a strange problem, it seems something happens in my computer after a period of time.
Logic is always crashing / freezes after working with it for about 1 hour (not sure exact time). When I just leave my mac on for the same period of time not running logic and start up Logic later it also freezes imidiately. But only logicpro seems to have this problem. All other programs working well.
I need to restart my computer to start working again and then again after a period logic crashes again. I also installed logic express but express works well.
I already reinstalled everything a few times and also working with just the basic (no plugs, interal audio, no hardware, no extra memory ect.) didn't help. I did changed discdrives, internal memory ect.
Hope anyone has an idea what it can be
Thanks for helping
Powermac G5 SP 1.8 Mac OS X (10.4.9) 2GB int. mem

hi,
look here:
http://docs.info.apple.com/article.html?artnum=302212
hier you will find the right downloads for the firmware update for the late 2004 g5 1.8. choose the right updater for your system.
it should also appear if you use the software update.
after that it should work like before.
hope that helps
all the best
andreas

[SOLVED]I can't use my usb mouse after updating kernel to 3.15.5-1

Hi~
I have a problem with using my usb mouse.
Well.. I'm using laptop and there are two usb-3.0 ports.
One of them is worked correctly, but other is worked only with usb storage device.
When I try to connect usb mouse and keyboard, it won't work at all. ( nothing is printed out with dmesg )
I googled about this issue, but I couldn't find o.O...
Is it problem with kernel ? or hardware!? How can I fix this ?
[ 1.176616] ACPI: bus type USB registered
[ 1.176646] usbcore: registered new interface driver usbfs
[ 1.176658] usbcore: registered new interface driver hub
[ 1.177628] usbcore: registered new device driver usb
[ 1.178550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.189661] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.189925] hub 1-0:1.0: USB hub found
[ 1.192041] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.192239] hub 2-0:1.0: USB hub found
[ 1.195303] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.208760] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.208951] hub 3-0:1.0: USB hub found
[ 1.548583] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 1.741222] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.741228] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.901718] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.234848] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 2.568121] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 2.840667] usbcore: registered new interface driver btusb
[ 2.844649] input: LG HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16
[ 2.844722] usbcore: registered new interface driver uvcvideo
[ 2.844723] USB Video Class driver (1.1.1)
[ 2.860601] usbcore: registered new interface driver usbhid
[ 2.860602] usbhid: USB HID core driver
[ 2.861624] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:00DD.0001/input/input17
[ 2.861727] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input0
[ 2.862942] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:00DD.0002/input/input18
[ 2.863039] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input1
[ 2.907910] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.031829] hub 3-1:1.0: USB hub found
[ 3.048394] scsi4 : SCSI emulation for RTS5139 USB card reader
[ 3.048528] usbcore: registered new interface driver rts5139
[ 216.214721] usb 1-1: USB disconnect, device number 2
[ 216.927102] usb 1-1: new low-speed USB device number 6 using xhci_hcd
[ 217.119883] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 217.119887] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 217.127966] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:045E:00DD.0003/input/input23
[ 217.128101] hid-generic 0003:045E:00DD.0003: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input0
[ 217.138871] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:045E:00DD.0004/input/input24
[ 217.139016] hid-generic 0003:045E:00DD.0004: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-1/input1
Last edited by chaoxifer (2014-07-16 08:49:12)

Well.. I executed pacman -Syu, so most system packages have been updated.
Anyway, I got new dmesg when It pasted few minutes after booting system.
[ 228.041923] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[ 228.216510] usb 1-2: device descriptor read/all, error -71
[ 228.375078] usb 1-2: new low-speed USB device number 7 using xhci_hcd
[ 228.534966] usb 1-2: device descriptor read/64, error -71
[ 228.638302] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 6.
[ 228.638315] usb 1-2: hub failed to enable device, error -22
[ 228.798196] usb 1-2: new low-speed USB device number 8 using xhci_hcd
[ 228.812966] usb 1-2: device descriptor read/8, error -71
[ 228.929432] usb 1-2: device descriptor read/8, error -71
[ 229.191283] usb 1-2: new low-speed USB device number 9 using xhci_hcd
[ 229.205938] usb 1-2: device descriptor read/8, error -71
[ 229.322657] usb 1-2: device descriptor read/8, error -71
[ 229.424542] hub 1-0:1.0: unable to enumerate USB device on port 2
I found some articles from ubuntu and they said it caused by usbcore because it tries to use 'new' usbcore scheme.
And the solution in there is
echo Y > /sys/module/usbcore/parameters/old_scheme_first
but it won't work. ;(..

Two separate questions about the new s3 update

Okay, so I just recently updated my s3 and so far I love everything about it, very nice job. Just two things bother me about it (not sure if the second one has to do with the update or not)
Firstly, when you receive a text message it pops up on your lock screen with about the first sentence of the message. Now that's a big problem for me, I enjoy my privacy, so if I'm texting someone, get up and leave me phone wherever I am at the time, someone could pick up my phone and instantly see who I'm talking to and what about without any type of security (I have the pin lock). If there is a way to disable it I cannot find it anywhere, maybe I'm not looking hard enough, any help would be appreciated.
Secondly, when sent a picture message instead of the message itself from the person sending it I get a message from "Me" or my own phone number saying "You've got a new PIX or FLIX message! To see it, visit *insert the vzw site here*. When going to the site it asks me to sign up and sync my phone to the cloud, which I do not want at all. Is this something with my service or the new update? It's quite infuriating to be honest. If either of these is true, is there a way to disable this feature and continue receiving pictures/video messages "normally"? PS: Picture/Video messaging worked all normal before I updated.
Thank you so much for any insight or help you can provide.

jakeskee wrote:
Okay, so I just recently updated my s3 and so far I love everything about it, very nice job. Just two things bother me about it (not sure if the second one has to do with the update or not)
Firstly, when you receive a text message it pops up on your lock screen with about the first sentence of the message. Now that's a big problem for me, I enjoy my privacy, so if I'm texting someone, get up and leave me phone wherever I am at the time, someone could pick up my phone and instantly see who I'm talking to and what about without any type of security (I have the pin lock). If there is a way to disable it I cannot find it anywhere, maybe I'm not looking hard enough, any help would be appreciated.
Thank you so much for any insight or help you can provide.
If you are using the stock Text messaging App. Open the app (while on the screen that shows all your people you have text, (not an individual person) click on your menu icon, the go to Settings> scroll down to >Notification settings>Notifications The box should be unchecked, or if it is checked there is a "Preview message" option that you can uncheck. That will take it off of the lock screen. Hth.
***Sorry, did not see the link that Tikibar posted ref the first question. If you leave the "Notifications" box checked, you can customize the rest of your notifications...and just uncheck the "Preview message" box.

Battery only lasts for about 7 hours after Update to IOS 4.2.1

Hello folks,
after I have updated my Iphone 3G to the newest firmware (4.2.1) may battery only lasts for about 7hrs in standby-mode (no tethering, umts, wifi, whatsoever), while it has been much much better before.
Does anyone of you have the problem or a solution for it?
Thanks,
Alex

I'm happy to tell you that the problem, at least for myself, is gone. I checked around on the forum and apparently it could be so that something went wrong when updating to 4.2.1 so restoring the phone from itunes could be the fix. I did so and the problems seams to be solved.
/Ola

After updating kernel and ZFS modules, system cannot boot

Starting Import ZFS pools by cache file...
[ 4.966034] VERIFY3(0 == zap_lookup(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &hht->ddt_histogram[type][class])) failed (0 == 6)
[ 4.966100] PANIC at ddt.c:124:ddt_object_load()
[*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
And then occasionally I see
[ 240.576219] Tainted: P O 3.19.2-1-ARCH #1
Anyone else experiencing the same?

Thanks!
I did the same and it worked... kind of. The first three reboots it failed (but did not stop the system from booting) producing:
zpool[426]: cannot import 'data': one or more devices is currently unavailable
systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
The second boot also resulted in a kernel panic, but as far as I can tell unrelated to zfs.
After reboot one and three imported the pool manually.
From the fourth reboot on loading from cache file always succeeded. However, I it takes faily long (~8 seconds) and even shows
[*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
briefly. Altough I might only notice that because the recent updates sped up oder parts of the boot process. Did you observe a slowdown during boot time, too, kinghajj?
Last edited by robm (2015-03-22 01:21:05)

Virtualbox question about what happsns "after" updating kernel. SOLVED

Similar Messages

Maybe you are looking for