[virtualbox][solution] UCCX editor hangs at 81% "Starting com.cisco.file.FileManager manager"

Hey guys, just wanted to post this here so it's documented somewhere.
If you're running windows in a virtualbox environment, and you run into an issue where UCCX editor hangs at 81% for a while -- finally loads, but won't actually connect to your CCX node (e.g. reactive script debug doesn't work, viewing the script repository doesn't work), I believe I've found a solution.
I've been racking my brain on this for the last couple hours, tried uninstalling and reinstalling, manually swapping out java versions, deleting every registry key I could find, to no avail. Then I fired up wireshark and looked at the traffic, and noticed a couple of tcp retransmits coming from the UCCX node. Just on a whim, I changed my guest's interface to a bridged interface, rather than 1:1 NAT, and everything immediately started working as expected (and no more retransmits!).
There's a small chance this might not have anything to do with virtualbox's gateway -- maybe it's just because my dhcp server hands me option 15 and 119, whereas virtualbox's dhcp server doesn't.
So yeah.. this isn't a question -- just hoping this helps someone googling for this issue 6 months down the road.

Thanks for sharing this. The 81% file.FileManager issue has been discussed a few times on the forums without resolution.
https://supportforums.cisco.com/thread/268952
https://supportforums.cisco.com/thread/2002816
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution i have already purchased it can i download a torrent and authorize it

Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution I have already purchased it can I download a torrent and authorize it. Somebody pl. Help

Exactly. Some of us don't understand the situation in India. This is a country with sickest internet speeds. The internet segment is dominated by fraudulant companies. There is no consistency that is why most of the data transfer here is through Pen drives and torrent websites. We have never seen a good downlooad speed here. And on the top of inconsistency lies the Mac book Air without a built in RJ45 port.
If i have to do it in an internet cafe it will cost me more time and money than to purchase a Mac book air itself. Apple should start giving us software loaded flash drives at least at premium.

UCCX Editor 8.0 vs. 9.0

I accidently load a script from 8.0.2 UCCX server using UCCX editor 9.0.2 then overwrite on it. Application Management deosn't like to load the script anymore. I know Time of Day is changed in 8.5 but it still says 'An error occurred while loading the Script SCRIPT[mainmenu.aef]. Please check log for more details.' message even though I removed all time of day and day of week section. If I try to open in UCCX Editor 8.0.2, it says 'Failed to load script file; com.cisco.script.ScriptIOException: Failed to load script: \default\/mainmenu.aef; nested exception is: java.io.IOException: unsupported version format: 7'
Any idea what I need to remove/change to load in UCCX Editor 8.0.2?
Kwang

Once you open a script in a particular editor, its "converted" to that editor's version and fingerprinted.
Your best bet is to create a new blank script and just start recreating the script from scratch in the proper editor. Trying to edit out the steps you think are causing the error is futile.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Photoshop Element Editor 12 does not start

Few days ago I installed Photoshop Elements 12. It worked fine, however today I decided to re-roll my system to the version prior to PSE installation. After reinstalling PSE12 I couldn't launch Editor - Organiser works fine.
Editor doesn't start if I try to opent it directly from .exe file, from Organiser or from Welcome screen. In Task Manager Photoshop Elements Editor program appears for a few seconds, later PDapp.exe appears and nothing happens.
I tried to reinstall the program removing all folders (also from "AppData" folder) but it hasn't helped.
Any idea how to solve the problem?

I decided to restore system because of some strange short (1-3s.) hang-ups.They started after installing last windows update.
I am using Win 7. I tried normal normal uninstaller.
Finally, I deleted some folders in CommonFiles/Adobe connected with PSE12 and with licence manager and then after reinstalling PSE I need to sign in to my Adobe account and everything works fine now.

Editor hangs in Windows 7

This has started happening a lot more. Just coding away when all of a sudden FB hangs. Sometimes I can wait five minutes and it will eventually free up. Other times, not so much and I have to kill the process and lose my edits. This last time it happened to bring up the intellisense before hanging, and, well, you can see the results below:
[Intellisense window showing on top of eveything else in desktop.]

Hi,
The next time your editor hangs, can you please take a jstack dump? (Instructions here: http://dev.day.com/content/kb/home/cq5/CQ5SystemAdministration/TakeThreadDump.html)
This will let us know where Flash Builder is stuck at.
-Anirudh

Firefox hangs shortly after starting

Recently updated to FF19 for Windows. Today FF started hanging within 10 seconds of starting. The menus worked, but that was about all. I could click the Window close control, but when the confirm close dialog would appear (if I managed to open a tab or two before FF hung) the dialog box would be blank. FF is the only app exhibiting this problem. It works fine in safe mode. I disabled all add-ons and plug-ins. Same problem. I uninstalled FF19 and then installed FF18.0.2. Same problem and symptoms. I created a new profile. Same problem and symptoms. I reset FF. Same problem and symptoms.
What other diagnostic or troubleshooting steps should I be taking.
Machine is an HP Envy 15, i7, 12GB, Win7 Pro SP1 64bit (OEM).

I restarted Windows in safe mode but no result. I have found what is causing the freezing though, it was the Lastpass add-on which was attempting to connect to the lastpass website every time FF starts. Here is the solution of the problem:
http://www.imagebam.com/image/3c18fc271388433
But then, when I was uploading the image FF froze again, this time FF causing the video driver to fail (I have to say, that I enabled hardware acceleration again, after fixing the lastpass freeze):
http://www.imagebam.com/image/9e5f52271389190
I forgot to mention - I use NVIDIA GTX560Ti, Intel Core i5 2500K, 16GB RAM and OCZ Vertex4 SSD with Windows 8 Pro x64 with all the latest drivers and firmwares installed.

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting

Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting. Has to be shut down by Task Manger. Task Manger shows that it is still using some CPU. Ran Procmon (part of Sysinternals) which shows that it is in a loop. Stack trace shows it is executing code in AMTValidateProductLicense.dll. Started happening about a month after I installed PSE. Everything used to work fine at first. Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD. That installation never worked, it aways hangs. If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way. And, yes I bought a new DVD to run on this computer, never been used in any other way. Any ideas how I can get PSE running properly?

It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck. The latest session with Neeraj seemed to be promising. After some investigation he asked to reinstall. First he uninstalled with Revo Uninstall, which seemed to be pretty thorough. That required a restart, so he set things up to restore his conference session and took my phone number. Unfortunately I guess his connection didn't come back. When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself. As before, Premiere works and Photoshop doesn't. When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them. Then the window freezes and I have to use Task Manager to kill it. So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work. I'd really appreciate suggestions about something else to try.
I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening. Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what? It really shouldn't be this hard to figure out.

UCCX editor 9.0.2 error

Hi,
I have installed uccx editor 9.0.2 in windows 2008 enterprise server as i am trying to open editor it comes up for half of a sec and goes down.
Can anyone provide me compatible window OS for UCCX editor 9.0.2.
Regards,
Dinesh Joshi

Try restarting the machine after installtion ..its necessary incase of editor.
Here are the compatible os:
Windows XP Professional SP2 •Windows XP Professional SP3 •Windows Vista (Ultimate and Business) •Windows 7 (Ultimate) •Windows 7 x64bit with WoW64 (Ultimate, Enterprise, Professional)
Source (you might want to keep it handy):
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Page 2 (editor)
Sent from Cisco Technical Support Android App

UCCX Editor without Administrative rights?

Hi,
Has anyone tried and to and been successful in running Cisco UCCX Editor without administrative rights?
I know that the docs states exactly that requirement, but I am stuck inside a customer´s very restrictive environment and need to get this to work.
Is it even possible?
Regards, and thanks in advance

I've never seen it work.
david

Sql Query Editor hangs

Hi after attaching a table component in a jsp.....and the selecting the table from the datasource...... the Sql Query editor hangs when trying to click on the table-nameRowset entry in the outline..
could anybody tell me what might be wrong

Hi,
The system requirements for Creator 2 can be found at:
ttp://developers.sun.com/prodtech/javatools/jscreator/features/sysreqs/index.html
As can be seen 1 GB RAM is required. At 512 MB the performance will be affected.
Cheers
Giri

When the new version will correct the error 10.0.0? program constantly hangs. will not start!

when the new version will correct the error 10.0.0? program constantly hangs. will not start!

Are you using any VST plug-ins or audio units? Then check, if they are still compatible. You may need to uninstall them.
See this support document:
Unexpected behavior with Audio Unit plug-ins http://support.apple.com/kb/TS5249

SAP BW 640-----SAINT HANGS AFTER CLICKING START

Hi Everybody,
We are on stack 9 on the source BW 640. I am trying to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353. Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
We have extracted the appropriate installation packages for the above components. When we run SAINT to install these components, and click START it just hangs. It does not take me to the next window.
At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004. I also have the latest version of R3Trans, and tp. SAINT still hangs after clicking start button. No logs are getting generated in \usr\sap\trans\log. No files are getting generated in \usr\sap\trans\tmp.
I restored the database to what it was before we initiated the SAINT process. Still SAINT hangs after clicking start button.
In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool). Likewise in SAINT-utilities-check-transport tool----every thing looks good.
Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155).
Any input is greatly appreciated.
Thank you.
Ramesh Srinivasan.

Thank you so very,very much. We are currently using a 640 gui. We tested with 710 gui and saint after clicking start does not hang.
So we are assuming that 710 gui will solve the problem.
Thanks once again. A very timely help. You bet I'll touch base with you if I run into issues.
RS

Firefox v28 will not launch yahoo and yahoo email often hangs. the problems started with v28, does not even load the homepage in the addr bar on startup.

i set yahoo mail as a homepage.
start firefox v28 and the screen goes blank, nothing shows in the addr bar and it just sits with
the spinning green icon. no problems until i moved to v28. i often have issues with flash player
hanging and created a dos bat file to kill it but that is not what seems to be happening with yahoo. pretty much everything else works. FF freezes but killing the plug in releases it. the newer versions
of FF seem more flakey than the older ones. thanks for your help

How do you kill the Flash player plugin using a BAT file -- are you killing an Adobe Flash exe or Firefox's plugin-container.exe?
You can start up Firefox to a blank page using the Run box on the Start menu, with this:
firefox.exe "about:blank"
Hopefully that will at least get you in. Then, for Yahoo mail, make sure to access your mailbox through the Yahoo home page (or AT&T Yahoo home page, etc., as the case may be). And:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens you can remove your Yahoo cookies individually.
Then try reloading the page. Does that help?
To rule out extensions as a possible culprit, could you try the site in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions, some advanced features, and some custom settings. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
* Help > Restart with Add-ons Disabled
Note: Flash and other plugins still run
After Firefox closes, a small dialog should appear: click "Start in Safe Mode" (''not'' Reset)
Any difference?

Ff 12 hangs up at starting process (windows xp)

ff 12 hangs up at starting process - it is nor possible to click on the ui

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

InDesign hangs up when starting

Just downloaded All of My apps through the Cloud, but InDesign hangs up when starting??????

reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

[virtualbox][solution] UCCX editor hangs at 81% "Starting com.cisco.file.FileManager manager"

Similar Messages

Maybe you are looking for