Virtualisation Remote Access and Server
Guys,
Question about licensing:
I have a Mac Lion 10.7.2 Server, so the questions are based around that but would like to know differences for other licenses or systems. This is being used in a corporate testing enviroment and we would like to increase its use by have multiple users/remote users.....but licensing looks an issue/complex.
There seem to be 2 licenses Mac OS X Server (Lion) licence and Mac OS X (Lion 10.7.2) licence? Does one superceed the other or do they run 'together' if you have Mac Lion 10.7.2 Server?
According to the 2nd (Lion 10.7.2) license you can run 2 virtual machines in addition the the running one. So this is 3 altogether? One being the main OS and the other 2 virtual. Are there anyways of running all 3 in a hypervisor (vmware Vsphere like?) and is this allowed under the license(s)? This also seems to be only for 'downloaded' and not pre-installed software.
Also in the 2nd (Lion 10.7.2) license it is possible to have Remote Desktop Connections. This is not mentioned in the first (server) license?
Both licenses mention the you can use the OS "by multiple individuals on a single shared Mac Computer that you own or control." but then seem to limit this to one user at a time. Can you have multiple Remote (VNC) desktop with multiple users? If not with these licenses which can you use?
Can you point me to who to/how to ask about these?
Thanks
Ben
The ACLs appear to be working fine. I am passing IP traffic for all of the configured subnets with the exception of the remote access subnet. I have both ends of the tunnel configured with the RA subnet in the crypto map. I am not using reverse route injection. Actually I am not at all familiar with it. Do you think this is where I should start looking?
Thanks
Similar Messages
-
Remote access and network services problem
I have a Mac Pro with two IP configs:
Ethernet 1: 69.##.##.## /255.255.255.248 [hidden for public forum security]
Ethernet 2: 10.0.0.20/255.255.255.0
My primary needs:
Able to remotely access the Mac via Remote Desktop using the public IP. Local LAN connectivity using 10.##.##.##.
Setup:
I have a 10 public IP address from my ISP and using one of the 10 now. Everything pings OK.
Question:
How can I customize the network service so that I can select the Ethernet 1 or Ethernet 2 port to use? So far it forces me select Ethernet 1 for all of the services selected. I'd like to use FTP & Web Server & Remote Access on the Ethernet 2 (public). The rest is LAN. I notice that Appletalk is only allowable on a single IP.
Quick experiment with the Internet sharing using Ethernet 2 (public) to Ethernet 1 failed to provide the desired forwarding result.
Mac Pro Mac OS X (10.4.9)I think you need to go further into the settings and define FTP etc. to the specific Ethernet. There are also settings Automatic and where you define your connection. I have a 3 inch book that I will look at to see if they address it. I to plan to do something similar, but haven't got there yet.
Michael -
Remote access terminal server & VOIP phone issues
I pose a question to the community. I work and manage a building that remotely accesses a terminal services server for my users to view an ERP application at our other building. Lately we have issues where those users when the let their screen idle lose their connection and have to wait with a customer on the line to reconnect to the Terminal Server. We don't have the server set to boot users off after any amount of time and the users at the other building have no issue of course since its on site. We also have a Mitel VOIP system and on regular occasion the calls go static or drop all together. Ive done trace routes from the router at both buildings and it seems to get stuck at a Level3 datacenter in Washington DC. Ive contacted my ISP's NOC asking for them to contact Level3 to look into the issue, but the responder gave me grief and...
This topic first appeared in the Spiceworks CommunityHaving them both kills being able to access the Net.Take out the gateway on your loopback adapter and network traffic should happen as normal :)
Is this configured only in TNSNAMES.ORA, and if so how?It's configured in listener.ora, but changing the port won't change the amount of traffic nor the Oracle load, it will just make everything slightly more confusing to everyone trying to help you troubleshoot your machine ;)
~Jer -
Radius for 802.1x; Remote Access and Wireless authentication
Looking to use a single Radius platform for authenticating Remote, wired and wireless users and machines. Anyone with some experience with that use to share some lessons learns...
Hello Richard,
there is a previous post from a user who wants to add authentication to his Cisco ACS Radius server for wireless clients, it might be worth contacting that user to see how he resolved this...here is the link to the thread:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Getting%20Started%20with%20LANs&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9504e
Also, have a look at the document below, which talks about the issue:
Selecting an EAP Method: the RADIUS Authentication Server Component
http://www.interlinknetworks.com/news/newsletters/20031104/tech.htm
HTH,
GP -
Can my moto 4 be remotly accessed and my text be read by someone else I am pretty sure mine is
I am on a pre paid plan and am almost certian my wife has remotly accessed my text messages ... how can this happen and how can I stop it
There are a number of apps designed to do this and much more
Top 10 Android Spy Apps and Software you don’t want to miss -
Creating large scale secure document repository for remote access and a few other Azure questions
Hello Microsoft Community,
Is there a way to put a bunch of documents in Azure storage and present them to an end user via an interface that is either web based or local that will provide security (log in control) to the folders and logging along with allowing access from multiple
sites? I have a large document library of medical records that have been scanned to PDF format that are historical. They moved EMR systems to a new system and the documents I'm talking about are historical access only in case a patient needs historical records
and aren't in the new system. Records staff would need to be able to log into said site, gain access to the files, search by file name and print / copy / save the PDF document so it can be sent to the patient requesting the info.Shared access signature and stored access policy can be used in this case.
A shared access signature is a URI that grants restricted access rights to containers, blobs, queues, and tables for a specific time interval. By providing
a client with a shared access signature, you can enable them to access resources in your storage account without sharing your account key with them. A stored access policy provides an additional level of control over shared access signatures on the server
side.
For more details, please refer the following links:
Create and Use a Shared Access Signature (http://msdn.microsoft.com/en-us/library/azure/jj721951.aspx)
Use a Stored Access Policy (http://msdn.microsoft.com/en-us/library/azure/ee393341.aspx) -
No remote access and not UI access
I could not access my "WD My Cloud" neither using remote ssh nor using browser UI. Any help please??? Thank You.
If you mean that you cannot connect to it locally, either via SSH, or via the UI, then your router has probably changed your device's IP address. http://community.wd.com/t5/WD-My-Cloud/Call-me-maybe-WD-Connectivity-Issues/m-p/881587
-
What is going on with my iPad update. I waited for four hours letting it "update" and after the alloted time, it tells me that I needed to update my iTunes first. After doing that, I can't even get into my iTunes. It says a file is corrupt. This is making me less and less impressed with these updates. I have trouble 80% of the time.
What iPad model and what iOS is it currently running? Are you trying to update the iOS via wifi or connected to your computer?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
We've managed to set up a wireless network and both have wireless internet access through the TC
But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
How is the security setup on the TC?
The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate but it allows me full access to all the files.
If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords. -
Routing and Remote Access Logs (Windows Server 2008 R2)
Hi,
I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
I have been asked to find logs for the following for connections in to our server
Username used for connection
Computer Name
IP Address used by computer connecting
Start/End time of VPN session
Date
Encryption used
I found an article stating to enable RRAS logs you need to run the following command
To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
If you require any more details just let me know.
Kind Regards
DavidHi,
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
mentioned method.
To configure RRAS to enable logging
1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
3. Right-click Routing and Remote Access, and then click Properties.
4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
5. Click OK to save your changes.
The related KB:
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Active directory domain services stopped after removing routing and remote access role
Hello everyone;;
I am in deep trouble.. I did install routing and remote access and then lost connection to the server remotely. Then I connected a monitor to the server and removed the role... then it asked me to restart the server . After logging back in I found
all my active directory service has gone... I can see red cross on active directory domain services.. Also I am able to ping other pcs but other pcs cannot ping my server..
However when I go into the active directory services, it shows all services are running except file replication service. I have tried to start that service but it give error 1053 error..
My server in between loses LAN connection... I dont know what is going on.. Please help!!!
My server is win 2008 R2 ser pack 1
Only one DC....
Has fixed ip,
no DNS server running..Hi,
The File Replication Service Start Error 1053 error can be caused by damaged Windows system files. Corrupted system files entries can threaten the well-being of your computer. Many events can result in creating system file errors.
Please refer to the articles below to troubleshoot the issue:
File Replication Service Start Error 1053
http://repairerrors.net/file-replication-service-start-error-1053.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Vpn site to site and remote access , access lists
Hi all, we run remote access and site to site vpn on my asa, my question is Can I create an access list for the site to site tunnel, but still leave the remote access vpn to bypass the access list via the sysopt command, or if I turn this off will it affect both site to site and remote access vpn ?
If you turn off sysopt conn permit-vpn it will apply to both your site to site and remote access vpn...all ipsec traffic. You would have to use a vpn-filter for the site to site tunnel if you wanted to leave the sysopt in there.
-
Help with Remote access VPN on Cisco router 3925 via Dialer Interface
Hi Everybody,
I need help for my work now, I appreciate if someone can fix my problem.I have a Cisco router 3925 and access Internet via PPPoE link. I want config VPN Remote Access and using software Cisco VPN client. But it doesn't work.. Here my config router :
HUNRE#show running-config
Building configuration...
Current configuration : 5515 bytes
! No configuration change since last restart
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname HUNRE
boot-start-marker
boot-end-marker
enable secret 5 $1$vEFw$rLfvLglzUgddCVwXDx03K.
enable password cisco
aaa new-model
aaa session-id common
crypto pki trustpoint TP-self-signed-1050416327
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1050416327
revocation-check none
rsakeypair TP-self-signed-1050416327
crypto pki certificate chain TP-self-signed-1050416327
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31303530 34313633 3237301E 170D3134 30393235 31313534
31395A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30353034
31363332 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100CC79 74FCFABE 81183B70 5A9F4A53 EB609754 7D5F8587 9150B76E 3207A86E
5B65F9E9 6CDAC21A 6D69221D 1FF61632 14763308 43B2A1CC 8EE5ABAC EF07530E
3F0D35FE F08C955B 60B52B92 F8F54D53 DD6DD623 01F83493 02F9C49A F0C3483D
3B48A008 8D96700E 88924BFE DE00201B DE5965DE 32898CAD 9012AB55 76B6F39B
2D470203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 14C3418C BC35F3D9 B26B2475 2BB5F826 060525AB B3301D06
03551D0E 04160414 C3418CBC 35F3D9B2 6B24752B B5F82606 0525ABB3 300D0609
2A864886 F70D0101 05050003 81810070 AC7C26C6 4606A551 1A3FD6C5 2A5AEAE8
35DAC86E F8885E26 51F6EEAE 7565D3AA D532C8F3 55F6656F D103F38C 8FBDE7F1
83E77143 76469040 7FEA41E8 14963DB3 F7F28EA0 C5F2F42C B186B75C AAB04900
15F9CB38 A16964F5 4E7B4378 35041AA8 AE8EC181 D58D6A62 676E286A 7B9D80E6
35A0B9FB FB76E976 3D2A19D7 006078
quit
ip name-server 210.245.1.253
ip name-server 210.245.1.254
ip cef
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group 1
vpdn-group 2
license udi pid C3900-SPE100/K9 sn FOC1823839B
license boot module c3900 technology-package securityk9
username cisco privilege 15 secret 5 $1$aAjB$D3iLyPFTE7O1bHPnKSJcH0
username kdhong privilege 15 secret 5 $1$nfyX$FO1BPTabCUaE6uKQwpLT.1
redundancy
track 1 ip sla 1 reachability
track 2 ip sla 2 reachability
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group VPN-HUNRE
key hunre
dns 8.8.8.8
domain hunre
pool IP-VPN
acl 199
max-users 100
crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map DYNMAP 1
set transform-set encrypt-method-1
crypto map VPN client configuration address respond
crypto map VPN 65535 ipsec-isakmp dynamic DYNMAP
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip mtu 1492
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1412
duplex auto
speed auto
interface GigabitEthernet0/1
description FPT
no ip address
ip tcp adjust-mss 1412
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface GigabitEthernet0/2
description Connect to CMC
no ip address
ip mtu 1442
ip nat outside
ip virtual-reassembly in
ip tcp adjust-mss 1412
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 2
no cdp enable
interface Dialer1
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [USERNAME]
ppp chap password 0 [PASSWORD]
ppp pap sent-username [USERNAME] password 0 [PASSWORD]
ppp ipcp dns request
crypto map VPN
interface Dialer2
description Logical ADSL Interface 2
ip address negotiated
ip mtu 1442
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1344
dialer pool 2
dialer-group 2
ppp authentication chap pap callin
ppp chap hostname [USERNAME]
ppp chap password 0 [PASSWORD]
ppp pap sent-username [USERNAME] password 0 [PASSWORD]
ppp ipcp address accept
no cdp enable
ip local pool IP-VPN 10.252.252.2 10.252.252.245
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source list 11 interface Dialer2 overload
ip nat inside source static 10.159.217.10 interface Dialer1
ip nat inside source list 199 interface Dialer1 overload
ip nat inside source static tcp 10.159.217.10 80 210.245.54.49 80 extendable
ip nat inside source static tcp 10.159.217.10 3389 210.245.54.49 3389 extendable
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.159.217.0 255.255.255.0 192.168.1.8
ip sla auto discovery
ip sla responder
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
access-list 10 permit any
access-list 11 permit any
access-list 101 permit icmp any any
access-list 199 permit ip any any
control-plane
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
transport input all
line vty 5 15
password cisco
transport input all
scheduler allocate 20000 1000
ntp master
end
However, I cannot ping interfac Dialer 1. I using Cisco vpn client software ver 5.0.07.0290.
Hopeful for your answers !
ThanksHi David Castro,
Thanks for your answer,
I configed following your guide, but it have not worked yet. I saw that I cannot ping IP gateway Internet . I using ADSL Internet and config PPPoE and my router receive IP from ISP. Here show ip int brief :
GigabitEthernet0/0 192.168.1.1 YES NVRAM up up
GigabitEthernet0/1 unassigned YES NVRAM up up
GigabitEthernet0/2 unassigned YES NVRAM up up
Dialer1 210.245.54.49 YES IPCP up up
Dialer2 101.99.7.73 YES IPCP up up
NVI0 192.168.1.1 YES unset up up
Virtual-Access1 unassigned YES unset up up
Virtual-Access2 unassigned YES unset up up
Virtual-Access3 unassigned YES unset up up
But I cannot ping Interface Dialer 1, so may be VPN is does not worked. Do you have some ideal ?
Thanks very much ! -
I successfully set up my "upgraded" Verizon DSL service and modem two weeks ago (have had internet connection on desktop and laptops since) but with that transition I lost the ability to remote access into my work computer from home and to have my TiVo connect to its server. I am just completely disgruntled at Verizon's request to pay them $89 for the tech support I need to get my new stuff working as well as my old stuff did - and I'm hoping someone out there can help me instead.
The computer help guys at work said the system at work's port is 3389 and TiVo's support website give as whole list of possible ports (http://support.tivo.com/app/answers/detail/a_id/402/c/105%2C109/r_id/100041). Is this issue something that can be resolved in the router's port forwarding window? Is so, how do I set that up correctly? If it's something else, please tell me what and how! I've read the Veralink 7500 User Manual and I just can't figure out what I'm doing wrong.
Thanks in advance for any help that's out there! And happy Father's Day to you... if that applies!I solved the problems myself... and here's the solution in case anyone else would like to keep $89 in their pockets!
In both instances (remote access to work and connecting to the TiVO network), it is indeed the Port Forwarding feature you need to use in the Versalink 7500 router setup website (people will try to disuade you of this!). In both cases, I did the following just using different port numbers (depending on what I was trying to get my computer to talk to) and with my computer's firewall on and the router's firewall set to medium. Sorry I couldn't figure out how to post screen shots in this post... prepare to visualize!
1. On the "New Port Forwarding Rule" page, click on "create" for #1, pick "host" for #2, and then select the computer your router is connected to in #3 (it might work with one of the other computers selected, but mine worked with the device he router was connected to).
2. You need to do this step twice - first time select "direction" IN (in #3), second time select "direction" OUT. On the "Create Port Forwarding Service" page, you can name it whatever you want for #1, keep "port forwading" selected" in #2, in #3 you'll need to figure out (a) if you need to select TCP, UDP, or BOTH for "protocol" (based on the online or manual documentation for the system you're trying to connect with), (b) "global portstart" (c) "global startend" and (d) "base hostport" should also be found in the documentation (see note below for Windows remote access and TiVo port info that worked for me) and they are all the same number (ex., global portstart = 80, global startend = 80, and base hostport = 80), and then (e) select the direction (first time, in; second time, out... remember, computer communication is a two-way street, just like humans!), and (f) leave "port direction" as DST. Then you need to (g) click apply after you've added all the ports in both directions (my screen started this sequence of freaky flashy glitchy behavior, but apparently that was the fairy dust making the computer magic happen b/c when it was done, my connectivity was restored!).
3. The port that worked for me to remote access from Windowss PC to Windows PC was 3389.
4. This is the site that had the big list of ports for TiVo, but I think it was ports 80 and 8080 (see the first entry under the troubleshooting port issues) that made the magic happen for me: http://support.tivo.com/app/answers/detail/a_id/402/c/105%2C109/r_id/100041
I hope this is useful to some others and that you just saved yourself $89 in tech support charges for this irritating little issue... go buy yourself a drink and enjoy the summer!
Now I'm off to figure out how to back up these router settings based on the less-than-friendly-to-laymen-computer-users Versalink manual. Wish me luck! -
Remote Access: Configure Video Playback to not go black
While using Remote Access Media server the display will go black in the middle of the video the sound will keep playing and if you touch your keypad or mouse fast enough the screen will start up again but if you aren't paying attention you may have to
sign back into your computer. Is there any settings either in Windows 8.1 or on Windows Server 2012 Essentials R2 that I can change to get this behavior to stop.
Derek SmithHi,
Regarding to your description, did you mean when the screen came black, if you didn’t do anything, you had to entry password and then log on computer
again? Or just the screen gone black, then you operate, the screen came back? Did you always encounter this issue at the same time when the video plays?
Based on current state, please refer to the path: Control Panel-> Power Options-> Change plan settings, then check the setting “Turn off the
display”. How many minutes you set to the setting? And, please follow the path: Control Panel-> Personalization-> Screen Saver, then check how long the waiting time you set.
By the way, would you please use another Player to play the video, will encounter the same issue?
Hope this helps.
Best regards,
Justin Gu
Maybe you are looking for
-
Abstract method in constructor
Hi! This is simplification of my 'problem'. I solved it by more clear approach but I still don't understand the result. Output is: true, false, true. I would expect true, true, true. I use Mac Java 1.4.1. public class TestAbstract { public static voi
-
Safari constantly crashes - is it 10.4 - 10.5 plug in or SIMBL
Hi, I've had this problem of Safari constantly crashing, is it due to a the 10.4 - 10.5 plug in or SIMBL which is in my inputmanager? Here's my crash report, many thanks for any advice Process: Safari [1699] Path: /Applications/Safari.app/Contents/Ma
-
Receipt (Incoming Payment) system default print layout
Hi, When I print the Incoming payment receipt with the default print layout - APA Receipt (System), it always show many rows in the table. e.g. the incoming payment is a cheque from "Bank of China". I expect there should be only 1 row in the repetiti
-
Lion Mail5.1 HTML emails display problems...
Hello all Lion Professionals, Does anyone know why I see some HTML emails in a very bad way? When I receive emails that includes pictures and HTML code the message fall apart, the images included in the message are there, but as an attachment... It d
-
Problem with Print Settings- Epson Stylus CX4200
Hi there, I am having issues with my print settings. Firstly, when I run out of ink on a cartridges it just says "out of ink" and does not show the ink levels of the different colors. Therefore I need to replace all the colors as I do not know which