Virtualising a 2008 Server to DR site
Hope someone has an easy answer to this...!
I have a Windows 2008 SP2 server (physical) that houses a critical SQL database and Apache Server. What I want to do is have another server at a DR site with Server 2012 r2 preferably and have a Virtual machine setup that will replicate the Windows 2008
server. I want to do this without changing anything on the physical server now.
I have looked at Double Take availability but the target DR server has to be 2008 sp2 as well. I just want the simplest way to do this where if the 2008 source goes down they can continue working at the DR site if need be. What do you suggest?
Hi Sir,
Hyper-v replica is used for sync VM change to VM regularly .
>>where if the 2008 source goes down they can continue working at the DR site if need be.
It seems that you want to sync physical to VM residing at DR site .
As far as I know hyper-v can not do that .
If you need to P2V that physical server , you can try to use
Disk2VHD .
But I still suggest you to create a new VM then migrate these applications to VM if it is possible .
In addition , SCVMM 2012 sp1 can handle P2V operation too .
http://www.robertborges.us/2014/05/questions-answers/p2v-migration/
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Similar Messages
-
How to connect Crystal Report 2008 server with SAP BI/BW server
Hi ,
I have downloaded the 60 Days trial version of "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
Can you please guide me how to connect them?
Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
Any inputs would be appreciated!!
Regards,
NaweenHi Michelle,
Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
Hope this is clear now?
Thank you
Don -
Best/Safest way to P2V a SBS 2008 Server to sit on Hyper V
We have used Double Take when we did our P2V migrations to Hyper-V. We did it during office hours and didn't get any downtime.
After doing a lot of searching I managed to find that Microsoft have released an updated Version of MVMC (Microsoft Virtual Machine Converter 3.0). This new version now includes the ability to do a Live Physical to Virtual conversion.Previously they had removed this feature from SCVMM 2012 R2 and as a result I was going to do a Disk2VHD of the SBS 2008 server and then load that into Hyper V.But after doing more research I am thinking that doing a Live P2V on a SBS 2008 is risky as its got Exchange, SharePoint and other programs that change constantly.I am worried that even if I disconnect the server from the network and P2V it that something might change and I won't get a 100% carbon copy.As such I am thinking of taking an image of the Server using something like Acronis True Image Universal Restore boot CD and then restoring the image...
This topic first appeared in the Spiceworks Community -
How to install a plugin on 64 bits windows 2008 server?
From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
We have a client that was running windows 2008 server. A previous IT person had setup their system, so we were walking into a situation where there were many unknowns. Server was mainly handling emails only, and we were able to get their exchange
database off and export PSTs to hosted exchange via microsoft.
Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described. He would go to the following url:
https://mail.theirdomain.com/remote/menu.aspx#
and he would use his login and then he would see several links to folders. He could then click on those and see his desired files.
We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.
We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server. As I am still learning and my boss wanted me to research this on my own and figure out how to find
out where these files are located. Any advice would be greatly appreciated.
Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work. Is there any way in the IIS 7 management console to figure out where this was pointing to?I figured it out - The server was using sharepoint to host these files. I browsed localhost:987 and opened the sharepoint site locally on the server. They had several documents to be exported, however when clicking on Open in Explorer it was
giving an error that local client was not configured. I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off. -
Windows 2008 Server - Cannot run Active Directory Users and Computers
Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B
Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che -
CF9 install on Windows 2008 Server R2
Hi everyone I've installed Cold Fusion 9 on my windows 2008 Server r2 box and everything appears to be configured correctly becuase I can get to the Cold Fusion 9 Administrator page just fine. I've looked within IIS 7.5 and it's recognizing the .cfm file I think becuase it's an option under default documents. However I try to view the file from the local host I get a error 500.0.
Module
IsapiModule
Notification
ExecuteRequestHandler
Handler
AboMapperCustom-77246
Error Code
0x800700c1
I have no idea what that mapper is or what it's supposed to do so if anyone could help me out I would be eternally grateful! Why oh why couldnt cold fusion 9 have native IIS support in it.
UPDATE
Apparently this error 500.0 gets applied to all my sites within IIS 7.5. Not just the one I intend to use .cfm files on. When I go into the web configuration tool and remove the configured webservers and restart everything goes back to normal but the .cfm files throw a 404.3 not found error for the following module.
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032Hi
Windows Server Core edition is not listed as supported platform:
http://www.adobe.com/products/coldfusion/systemreqs/
HTH, Carl. -
Installing CF8.0.1 64 on Windows 2008 Serv
Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008 -
We would like to adopt the hardening recommendation for Windows 2008 R2 from CIS to all our DC servers. However, but then we found some of our DC in remote sites are Windows 2008 server only.
Is the hardening settings from Windows 2008 R2 from CIS also applicable to Windows 2008 DC?
Thanks for your attention.Yes, this should be fine. Hardening only specific security settings, registry keys etc and there's not much difference if you consider hardening.
Just for reference, here's the difference between 2008 and R2 :
http://technet.microsoft.com/en-us/library/dd391932(WS.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
T400s and Windows 2008 Server - Network card
I have installed Windows 2008 Server Enterprise edition on T400s. I cannot get network card to work, or wirless. I tried drivers for Win 7 and Vista. Are there any drivers for 2008 Server, or workaround?
Partially solved the problem for wirlesss connectivity:
1. Downloaded drivers from Intel site for Intel Wireless 5300 card
2. Enabled wireless setting on Win 2008 through features option -
I know this topic is been discussed a lot , I just installed
CF Enterprise on 2008 Server and on my local dev box on Vista
buisness .
Problem is that when ever there is request comming to access
the web site Jrun spikes to 80% 90% CPU usage and then comes back .
i have checked log files etc but have no clue why its hapenning , i
dont know how to do thread/stack dump if some one could help me
with this . or any suggestion how to proceed on this . this problem
with only at server 200 and CF combonation , at my dev box there is
no issue and its running just fine,
Thanks in advancei dont know how to do thread/stack dump
Put jrun thread dump in Google search field -
Receive error "bobj undefined" after deploying Web app to Win 2008 server
Developed Asp 2 app in a Windows 2003 server environment with VS 2005 and an upgraded full version of Crystal Reports 2008.
Installed full version of Crystal Reports 2008 on Windows server 2008.
Copied Web app over to Windows 2008 server.
App comes up fine until I attempt to display a report where I receive the bobj undefined error.
Searched the forums and found that the majority of the problems are caused by the Aspnet_Client folder not being copied to c:\inetpub\wwwroot folder.
The folder already exists and is populated. Just to be sure I copied the aspnet_client folder from the development environment over to Windows 2008. Still get error.
Installed vs2005 on Windows 2008 and applied all the necessary patches. Opened the Web app project and ran within VS 2005. Get same error "bobj undefined".
Checked versions in Web.config for app as well as assembly entries in c:\windows\assemblies, c:\Windows\Microsoft .NET\Framework\v2.0.50727\ASP.NETClientFiles and all reflect the correct version 12.Well it appears that the problem is fixed. The issue was tha aspnet_client folder was indeed copied to c:\inetpub\wwwroot folder but the folder did not show up under the default Web site as a virtual directory in the IIS Service Manager.
I created the virtual directory aspnet_client and pointed it to c:\inetpub\wwwroot\aspnet_client folder and now my reports render without error.
I will try deploying the app to another VMWare Windows 2008 server and see if this will work. I don't want to have VS 2005 installed on the production system so I need to be sure that I only require the installation of the full version of Crystal Reports 2008. I am assuming the Crystal Reports runtime will also be installed.
Installed full version of Crystal Reports 2008.
Created virtual directory aspnet_client
Copied ASP app over
Reports now work.
It appears that the Crystal Reports 2008 install can't create the virual directory aspnet_client on IIS7.
Regards
Paul -
Upgrading exchange but want to leave SBS 2008 server in place.
Hello TechNet
I would like to install an exchange 2013 server in my organization, currently i have a sbs 2008 server. I would like to keep the remote user functionality of sbs but upgrade the exchange. If that's not possible i am still upgrading exchange. Does anyone
have a best practice steps for moving from SBS 2008 to exchange 2013. Should i just fallow the upgrade path from exchange 2007 to exchange 2013? The server i'm installing exchange on is a AD server on the domain currently and is running Windows server 2012.
Thanks in advance for any advice or help.
Bri
RBIT@CAWe went that route as a stop gap when hardware constrained us: SBS 2008 successfully virtualised on a 2012 R2 Hyper-V host. It was not all plain sailing. Having shut down and disabled all the services on the physical SBS2008,
we used the Sysinternals disk2vhd tool to get two vhds (C: was system, E: was all the data including Exchange info stores), converted to vhdx using 2012.R2 Hyper-V manager and built a VM using these vhdxs. It booted at first but then
froze at restart after the Hyper-V host tools were automatically installed. We found a work round which involved running the MS System Update and recovery Tool (SURT) after the VM initial boot and before any subsequent VM restart. Once services
were put back to normal, the virtualised SBS 2008 ran fine.
There is some doubt as to whether this is a supported configuration, and it will not be easy to configure robust backups (see
this thread). However, our SBS2008 VM has been running for over a year in this configuration and am just now planning a move to Office 365 integrated Exchange with onsite Exchange 2013 plus virtualised 2012.R2 DC as per Larry's first reply.
Good luck which ever way you go, and tread carefully! -
When is going to be expired MCITP Windows 2008 Server?
Hello,
I would like to know until when is going to be possible to do MCITP Windows 2008 Server exams.
Some time ago I read on http://www.microsoft.com/learning/en/us/retired-certifications.aspx that the certifications will going to be expired on July 31 of 2013. But nowdays it doesn`t appear anything on the web.
Many thanks
RegardsHi, Roberto.
The MCITP: Server Administrator on Windows Server 2008 certification seems to have vanished from the web site. It is not listed with the other MCITP certifications and yet is not listed as a retired certification.
The MCITP: Enterprise Administrator on Windows Server 2008
certification is not scheduled to retire any time soon. It requires you to pass five (5) exams, explained here:
https://www.microsoft.com/learning/en-us/mcitp-certification.aspx#item-ID0EDAAAABCA
Alternately, you can earn the MCSA: Windows Server 2008 certification, which requires you to pass three (3) exams. It is explained here:
https://www.microsoft.com/learning/en-us/mcsa-windows-server-2008-certification.aspx
After earning either of these two (2) titles, you can easily upgrade to the new
MCSE: Server Infrastructure certification by passing just two (2) more exams, explained here:
https://www.microsoft.com/learning/en-us/mcse-server-infrastructure-certification.aspx#upgrade
Good luck!
Best wishes, Davin Mickelson -
How to install Cisco Work 3.2 on Windows 2008 Server Standard R2
Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
FaridHi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet
Maybe you are looking for
-
Hi, I am trying to read the values of the node of XML file. The structure of the XML file is: <?xml version = "1.0"?> <DOCUMENT> <LANGUAGE_TRANS> <TRANSLATION> <CODE>3</CODE> <VALUE>Please select a number</VALUE> </TRANSLATION> <TRANSLATION> <CODE>5<
-
Flash Video doesn't work when burned to CD?
I'm using Flash 8.0 pro. I've exported a video as swf and html and it plays fine from my desktop but the video doesn't load when burned to a cd-r. If I click on the swf file I get nothing. I've included the source of the html page. <html xmlns=" http
-
I lost my IPhone at Wood Badge this Sat., is it possible to find it if its on airplane mode?
-
PS Photography Program Availability?
In all the online information I understood that the Photography program (PS +LR) was available at a flat rate to owners of CS3+ at a special offer until 31 December? I am aware the price is different depending on region. But could someone please expl
-
Mac OS X could not be installed on your computer
Hello guys and girls, About a year ago I got this problem and never managed to fix it, and bought a new laptop. However my mum wants a laptop and I'm now determined to fix my 2011 Macbook Pro to give to her. Essentially my macbook was running extreme