Virtualization service status - unknow system center 2008

hi .
i installed system center 2008 on a 2012 server ,
i created several machines on it and they are working fine ... the problem is i cannot do any action like clone or create check points or migrations from system center ..
beside every vm there is a message host is not responding and in the properties of the hyper v host error virtualization service status - unknow but all other options are checked ok
i ve 2 network cards on the host server one is used for the virtual machines and the other is for the local network
all machines are assigned to that virtual network card
please advice on solving this issue

Of the 18 or so machines, most have not been frequent repeat offenders (popping up only every few days) but there are a few that have been somewhat daily offenders. I have removed the client, rebooted, reinstalled the client manually on the heavy offenders
and this has not corrected the issue.
When I RDP to the machine and try to stop the System Center Management service it take awhile (30+ seconds) and then I get an error stating:
Windows could not stop the System Center Management service on local computer. Error 1053: the service did not respond to the start or control request in a timely fashion.
The when I click OK the service is stopped and I then start it. If I stop it again it takes like 5 seconds and does not give any error.
From looking at the Operations Manager event viewer I have multiples of:
A scheduled discovery task was not started because the previous task for that discovery was still executing. Event ID 10000
The Windows Event Log Provider monitoring the Application Event Log is 1124 minutes behind in processing events.
This can occur when the provider is restarted after being offline for some time, or there are too many events to be handled by the workflow. Event ID 26017 (note on this one, this occurs right after the nightly reboot) --- I flushed the Health Service
State and Cache, still get the System Center Management service to stop responding within an hour and a heartbeat failure on SCOM.
No firewall.
AV (Symantec Endpoint Protection) is clear with the same setting as all the servers.
These servers that keep having the issues do have citrix loaded but again, nothing has changed on the client (servers) side from SCOM 2007 to SCOM 2012 and we never got these in 2007, just 2012.
As for the “ServicesPipeTimeout” I could not locate a key in the registry with that value.

Similar Messages

Service templates for System Center components

Hi there,
According to Microsoft a set of service templates would be provided after the release of VMM 2012 R2.
These service templates can be used to deploy all System Center components as VMs through VMM. But I can’t find them..
Anyone knows when these service templates will be released? Perhaps they are already available.
Would speed up things dramatically!
Many thanks!
Martijn

They are trickling out..
And, it is tied to the Azure Pack Gallery feed.
Download Windows Azure Pack Gallery Resources
Install the Web Platform Installer
Windows
Azure Pack Gallery Resources can be downloaded with the
Microsoft Web
Platform Installer
You must download and install this free tool to obtain new Gallery Resources.
Add the Service Model feed
Start the Web Platform
     Installer.
Click the
Options link at the bottom of the
     window.
Enter following link into the
     Custom
     Feeds text box.
          http://www.microsoft.com/web/webpi/partners/servicemodels.xml
Click the
Add Feed button.
Click
OK.
A
Service
     Models option
     should appear at the top of the window.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

System Center Service Manager 2012 SP1 upgrade install error

I am trying to upgrade my SCSM 2012 front end app server to SP1 and am getting these failures in the log when it fails with the error "Service Manager is not in a valid state"
09:07:58:Could not find WCS portal web site in IIS metabase!
09:08:02:***ERROR*** Microsoft System Center 2012 - Service Manager: Microsoft System Center 2012 - Service Manager is not in a valid state.
09:08:02:Application Ended
09:08:02:-222
Can someone tell me how to get this rectified? The WCS portal is installed and running and has been for months. The DW is upgraded but I cannot get the SharePoint self service portal or the App server to upgrade due to this error.

Hello
One question you have the website installed on the same
server on which you have the Server Management
Server, so if you can
not make your upgrade to
SP1, this changed because
a prerequisite of System Center Service
Manager 2012 SP1 in which you can not have
the server Mangement and
website on the same server they have to be
separate.

Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR

Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:48
Event ID:      33503
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Data Warehouse" />
    <EventID Qualifiers="32768">33503</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
    <EventRecordID>13089</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>DW2012.contoso.loc</Computer>
    <Security />
</System>
<EventData>
    <Data>Transform</Data>
    <Data>22989</Data>
    <Data>TransformEntityRelatesToEntityFact</Data>
    <Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
    <Data>   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

URGENT: Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center.

Hi every one,
I passed my first certification exam of Microsoft (74-409) and luckily passed the exam in 1st Attempt.and receive PASSED
Status sheet form PROMETRIC center they told me to check email within 15 days u receive ur certificate.
But What Happen . after 2 day's i receive email from Microsoft ([email protected])
Message Is below
Hello
Your goal of earning a Virtualization certification on Windows Server and System Center technologies is still within reach. Due to the popularity
of the original exam offer, the voucher you previously received is no longer valid. That does not mean that we won't offer help for you to gain your Microsoft Specialist certification for exam 74-409. Because we know that enhancing your Hyper-V expertise can
help improve your career options, we are offering a limited time offer of 50% off
74-409 exam.
Microsoft and Microsoft Learning Partners offer exam preparation resources depending on your learning goals and desired training format.
WHAT CAN I DO???????
please help any one..

Hi,
It can take more then two days to receive the mail for passing the exam, the email you received might have been a general email.
You can contect your regional Microsoft service:
http://www.microsoft.com/learning/en-us/help.aspx
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer MCSE:Server Infrastructure,
Danny van Dam
MVP, MCC

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

Server Virtualization with Windows Server Hyper-v and System Center Expiration

Prometric says: STATUS: Passed, EXPIRATION: 22-03-2015.
Does this means that I have to take the exam again before 22-03-2015?

Hi, Daniel.
Let me understand this exactly.
You log into http://register.prometric.com/ and then on the left side, you click
Candidate History to see your list of exam attempts.
Under the Status Expiration column, all the way to the right, it should read
Passed and the date/time you passed it. Are you sure it reads
2015 and not
2014? Is there also
another date on that same row/column for this exam's expiration below the date you passed it?
On the Prometric site, this column is supposed to display the date you passed it and optionally the date it expires for many non-Microsoft exams.
Typically for Microsoft exams, this final column will state the day you passed the exam and
not an expiration date.
As well, by passing this exam, I know that you also earned a Specialist: Server Virtualization with Windows Server Hyper-V and System Center certification title. This certification does
not expire.
Exam 74-409:
http://www.microsoft.com/learning/en-us/exam.aspx?ID=74-409
Have you looked at your MCP transcript to see if a expiration date is mentioned there? No matter what it states on the Prometric site, your transcript will describe any exam/certification expiration dates much
more accurately.
Also, I understand that the 74-nnn series exams are Microsoft partner exams. Perhaps they
do require recertification to keep up to date with the latest certifications.
If your transcript does really contain an expiration, you can contact Prometric about this and see if they can help you understand it. Here is the Prometric contact information for Microsoft exams:
https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
As well, if they can't help you, you can call/email Microsoft Learning Support with information found here:
http://www.microsoft.com/learning/en-us/help.aspx.
Finally, if you want to be sure how this exam works against your employer's Microsoft partnership, you can log in and view the Partner support page here:
https://partners.microsoft.com/partnerprogram/help/en-us/whgdata/whlstt14.htm#14
I hope someone can help you get this cleared up.
Good luck!
Best wishes, Davin Mickelson

FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330

FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself.

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

SQL MP - System Center Management Health Service Credentials Not Found Alert Message

Hi Dears,
I have read so many open cases, but I could not find solution to my situation...
Error: System Center Management Health Service Credentials Not Found Alert Message
Desc are 1 of those 2:
An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
Okay, I am fine, I verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
and it is fine....
BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
Please I need it step by step coz I am not able to handle this issue....
Thank you Guys

Hi,
If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
credential.
Niki Han
TechNet Community Support

How to get the health , performance information and about the services run on devices that have connected to the system center?

Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank you

Hi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v

How to check System Center Service manager 2012 R2 license version

Hi,
I have installed Microsoft System Center 2012 R2 Service manager 3months before but do not have remember whether I put permanent license key or evaluation, can anyone please let me know how can I check whether this is evaluation or permanent license?
Warm Regards, Pramod Kumar Singh Manager-IT

Hi,
During setup of the retail edition of System Center 2012 – Service Manager, you have the option of performing the installation without a product key and instead installing Service Manager as an evaluation edition. The evaluation
edition times out 180 days after installation. If you start with an evaluation version of Service Manager and you rerun Setup and install the retail edition or select edition, and you decide to use the existing databases that you created originally,
your installation will time out after the original expiration date.
I summarize the following steps and hopefully it will help you.
You could find the install date on :HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\System Center\2010\Service Manager\Setup"
Try to change the system time from install date to install date + 180days.
If you can't open the console again, you are evaluation Edition.
Rerun Setup to install Retail Edition or Select Edition.
For more information, please review the links below:
System Center 2012 - Service Manager Evaluation, Retail, and Select Editions
http://technet.microsoft.com/en-us/library/hh495604.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to sequence Microsoft System Center Service Manager?

AppV Version: 5.0
OS: Windows 7 64-bit
Application Name: System Center Service Manager 7.5.2905.0
Issue: This applications has a shortcut named as "Service Manager Shell" which will launch as shown in screenshot below,
The same shortcut will launch as shown in screenshot below with Sequenced Application,
Please let me know how to make this shortcut launch same as source.
Regards,
Reddy

I would check the package for any reference of the specific path to the C:\Program Files\Microsoft System Center 2012 path. Also have you run a ProcMon trace to see where the app is looking for the files? The certificate may be pointing to the C:\Program
Files Directory rather than the App-V path..
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

System Center Cloud Process pack for 2012R2 Service Manger

Hi Team,
I am setting infra for System center 2012R2. I am trying to install cloud service pack on Service Manger server build on 2012R2 Components.Server is already running Service Manger 2012R2.
during installation od Cloud Proccess pack error appear under prereq stage that Service Manger 2012 Is not installed.
Please let me know if Cloud Process pack for Service Manager 2012R2 is differ from Service Manger 2012Sp1.
Thanks
Ravi
Ravi

CSPP is discontinued. Use Windows Azure Pack.
Shahid Roofi

Virtualization service status - unknow system center 2008

Similar Messages

Maybe you are looking for