VirtualProvider based on DTP- An issue with 0FI_GL_10

We have a VirtualProvider based on DTP and the datasource is 0FI_GL_10. When a report was generated out of it, it gave the correct value as it is in ERP. In the RSDS transformation, the field for Trading Partner (RASSC) was not mapped to any InfoObject
However, when we used a basis InfoCube to get the data from 0FI_GL_10 (via a DSO in the dataflow after PSA for 0FI_GL_10), we found that few data did not match ERP. Part of the problem is we can only include 16 Key fields in DSO. When looked into the PSA data, the field for Trading Partner (RASSC), which is not mapped in the transformation to any of the infoObjects, is the only field that has different values in the two records (other than the data fields like balance, debit etc.). It makes me believe that Trading Partner should have been one of the keys. However, we already have 16 key fields (max.) in the DSO and hence we could not include it.
I am wondering how the data comes in accurately in report based on the "VirtualProvider based on DTP" (as mentioned above), when RASSC is not in the mapping? Again, please note that I could not bring in the data accurately in the Basis InfoCube.

no answers

Similar Messages

Any fix for the PC based network printer communication issue with Mavericks?

Any fix for the PC based network printer communication issue with Mavericks?

I just signed up for FIOS and am not experiencing your problem (had enough other ones instead).
Go to mail preferences ~ click on a mail account ~ click on the advanced tab. The only settings that worked for me were: port 110 SSL OFF, authentication: Authenticated POP (APOP). If I remember correctly when I first set this up another window opened and I typed in my password and never had to do that again.
Hope this helps.

Issue with form based Authentication in three tier sharepoint 2013 environment.

Hi,
We are facing issue with form based Authentication in three tier environment.
We are able to add users to the database and in SharePoint.
But we are not able to login with created users.
In single tier everything working fine
Please help , Its urgent ... Thanks in advance.
Regards,
Hari
Regards, Hari

if the environments match, then it sounds like a kerberos double-hop issue
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Issue with Java Class based DataControls.

Hi,
I'm actually working with JDev 11.1.1.3.0.
And we got a requirement to build a search page which should create a dynamic query. And we are not using ADF BC in this project.
Instead, writing some ServiceDelegates(Java Classes) which internally calls EJB services to do CRUD operations.
Finally, created DataControls using these Service Delegates to design UI.
Now one thing is clear that .... we are using java class based service delegates.
*Issues
=======
1. I have a table with 4 columns, in which 2 columns are of type selectOneChoice.
2. Now, based on first selectOneChoice selection ... second selectOneChoice should display corresponding values. It is something like this. First select one choice contains all KEYS. Based on the KEY selection second select OneChoice should display VALUES corresponding to the KEY.
3. I have around 20 KEYS in the first selectOneChoice.
4. User can add rows to the table as many as they want.
5. For each row, the first selectOneChoice is same(contains same keys).
The issue is, For the first time(when user logs into the screen ....) the table will be displayed with one row which contains 2 selectOnechoices and 2 inputText boxes and a ADD button at the end of each row.
1. User selected a KEY from first selectOneChoice. Hence, second selectOneChoice populates values corressponding to KEY. And user clicked on ADD button.
2. Now the first row was like that only. And a new Row got added to the table.
3. In the second row ... Now user selected a different KEY in first selectOneChoice. And the second selctOneChoice displayed values corresponding to KEY selected.
4. This is also fine. But now, when user tried to click on ADD button to add THIRD ROW ... the table got added with a new row.
5. Here is the problem.... From here onwards, whenever any new row get added to the table ... the first row's second selectOneChoice values are setting with values of second row's secondSelectOneChoice.
6. Finally ... what i'm trying to do is, the second selectOneChoice should not get affected/refreshed because of adding a new row.
If it is not clear ... please share your email address. I can share the sample code with you.
This is an high priority task given to me.
Please let me know your comments ASAP.
Thanks & Regards,
Kiran Konjeti

You could try the following to see where the class was loaded from.
System.out.println(ResourcesAndRatesForm.class.getProtectionDomain().getCodeSource());

Issue with frames-based sites in Sf-3(L); Looking for confirmation

Is anyone else having issues with Safari 3 (Leopard) and frames-based sites? Specifically, frame sizes not being obeyed?
For example, phpMyAdmin's left Navi frame is, in most themes, supposed to be about 180px wide; if need be, the frame is coded to show scrollbars (again, in all the themes I've used so far anyway).
However, Safari 3.0.4 on Leopard apparently ignores this and resizes the left Navi frame to an unusably narrow width (for reasons unknown - it's not the the right frame is especially full or anything), with no scroll bars either! However, the very same phpMyAdmin site works fine in Firefox 2, where frame widths show up exactly as they are supposed to.
Is anyone else having or can duplicate this issue?

I've been having this problem for months, Safari 3 beta and now Safari 3 on Tiger as well as Leopard.

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

Issues with Infoview data refresh on Crystal Reports based on BW BeX query

Hi all,
We applied the Business Objects XI3.1 fix pack 3.1 with Integration toolkit fix pack 3.1 in our environment.
After that we started having trouble with Crystal Reports based on BeX queries that use manual input variables.
The data refresh would not work in Infoview.
The data refresh would work using the Crystal Reports designer gui on local machine.
regards,
Abhishek

Hi all,
This thread is for the benefit of all the BW/BO people who faced issues with BO reports not working after certain fix pack installations.
After lot of time spent in debugging this and researching and some help from SAP, we found that BASIS had missed a step in the BO patching. This step was relating to applying some BW transports in the BW system related to the new Integration toolkit.
Please use below notes for the BW transport task of patching BOE Integration toolkit.
Refer to Note#1472104 which explains about loading the
transports when we install BO Service Packs or Fix Packs. Also please refer to the Note#1271751 for the advice on transports for BW systems.
Please go through page 206 (Configuring transports) in the SAP Integration Kit installation guide. You can download this document at below link.
https://websmp106.sap-ag.de/~sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf
Refer to Note#1345919 which explains about the process of loading transports for SAP IK.
regards,
Abhishek

Issues with OSSO ,custom login module and form based authentication

Hi:
We are facing issues with OSSO (Oracle Single Sign on ),Our application use the form based
authentication and Custom login module.
Application is going in infinite loop when we we try to login using osso ,from the logs
what I got is looks like tha when we we try to login from OSSO application goes to the login
page and it gets the remote user from request so it forwards it to the home page till now
it is correct behaviour ,but after that It looks like home page find that authentication is
not done and sends it back to the login page and login page again sends it to the home as it
finds that remote user is not null.
Our web.xml form authentication entry looks like this :
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/jsp/login.jsp</form-login-page>
<form-error-page>/jsp/couldnotlogin.jsp</form-error-page>
</form-login-config>
</login-config>
While entry in orion-application.xml has the following entry for custom login :
<jazn provider="XML">
     <property name="custom.loginmodule.provider" value="true" />
<property name="role.mapping.dynamic" value="true" />
</jazn>
Whether If I change the authentication type to BASIC and add the following line
in orion-application.xml will solve the issue :
<jazn provider="XML">
     <property name="custom.loginmodule.provider" value="true" />
<property name="role.mapping.dynamic" value="true" />
<jazn-web-app auth-method="SSO" >
</jazn>
Any help regarding it will be appreciated .
Thanks
Anil

Hi:
We are facing issues with OSSO (Oracle Single Sign on ),Our application use the form based
authentication and Custom login module.
Application is going in infinite loop when we we try to login using osso ,from the logs
what I got is looks like tha when we we try to login from OSSO application goes to the login
page and it gets the remote user from request so it forwards it to the home page till now
it is correct behaviour ,but after that It looks like home page find that authentication is
not done and sends it back to the login page and login page again sends it to the home as it
finds that remote user is not null.
Our web.xml form authentication entry looks like this :
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/jsp/login.jsp</form-login-page>
<form-error-page>/jsp/couldnotlogin.jsp</form-error-page>
</form-login-config>
</login-config>
While entry in orion-application.xml has the following entry for custom login :
<jazn provider="XML">
     <property name="custom.loginmodule.provider" value="true" />
<property name="role.mapping.dynamic" value="true" />
</jazn>
Whether If I change the authentication type to BASIC and add the following line
in orion-application.xml will solve the issue :
<jazn provider="XML">
     <property name="custom.loginmodule.provider" value="true" />
<property name="role.mapping.dynamic" value="true" />
<jazn-web-app auth-method="SSO" >
</jazn>
Any help regarding it will be appreciated .
Thanks
Anil

After the recent update I am having issues with Flash based games freezing and not responding.

After the recent update I am having issues with flash based programs not running or loading correctly. The programs will not load or take an extremely long time to load compared to jsut a few days ago. This happens across the board on anything flash based. Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best. I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers. None of this has helped at all. I am using Chrome and it is up to date and I checked my Flash player and it is up to date. I am running windows 7 64bit.

Here's what you're up against guys,
Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
And to the first post: Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

Issue With Page Break When Sorting is also applied on group

Hi
I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
The following is the sample XML
<ROWSET>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Accounts</ORGANIZATION>
<FULL_NAME>test1,</FULL_NAME>
<ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
<CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
<RUN_VALUE>250</RUN_VALUE>
<MONTH_VALUE>500</MONTH_VALUE>
<QUARTER_VALUE>500</QUARTER_VALUE>
<YEAR_VALUE>500</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test2</FULL_NAME>
<ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
<CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
<RUN_VALUE>5.19</RUN_VALUE>
<MONTH_VALUE>10.38</MONTH_VALUE>
<QUARTER_VALUE>10.38</QUARTER_VALUE>
<YEAR_VALUE>10.38</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test3</FULL_NAME>
<ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>19.67</RUN_VALUE>
<MONTH_VALUE>39.34</MONTH_VALUE>
<QUARTER_VALUE>39.34</QUARTER_VALUE>
<YEAR_VALUE>39.34</YEAR_VALUE>
</ROW>
<ROW>
<GRE>org1</GRE>
<ORGANIZATION>Finance</ORGANIZATION>
<FULL_NAME>test4</FULL_NAME>
<ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
<CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
<RUN_VALUE>0</RUN_VALUE>
<MONTH_VALUE>360</MONTH_VALUE>
<QUARTER_VALUE>360</QUARTER_VALUE>
<YEAR_VALUE>360</YEAR_VALUE>
</ROW>
</ROWSET>
In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
kumar

Hi All,
I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
Can anybody throw some light on this?
FYI...
I am using this code:
?if: position() mod 6= 0?
?split-by-page-break:?
?end if?
(Of course with in tags)
in G_LINES loop.
Can anybody help me out :-(
--Saritha

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issues with multiple things since Mavericks update

I installed the Mavericks update and since, I have been having multiple problems with different things on my MacBook Pro 13"
1. Printer issues: I have an HP officejet 6500 wireless printer (Officejet 6500 E709n Series), and now it's having major issues with printing, yet was working perfect prior to update. It will either cut out pages when printing PDF documents, or printing so slow that it has to take a break in between printing each document (an issue that all never occurred until update), to print documents back to back, it will stop after one document as though I have no other documents in queue to print, and pauses for an extremely long time (nearly a full minute, no exaggeration here, literally almost a full 60 seconds), something it's never done before this update. My Apps update even did an update to the HP software that is inside the Mac already to use printing (in other words, the mac doesn't need to have the HP software manually installed for it to work, it automatically sees the printer because it is connected to my wireless network just as my Macbook Pro which is also connected wirelessly to my network).
2. Internet issues: am now unable to click on certain links in safari that I was able to use prior to the update, yet they will open fine inside of firefox with no issues, yet I cannot always switch between two different browsers to perform task online (literally have to start all over inside firefox while in the middle of something in safari). Also lots of websites no longer work correctly and I have to constantly clear history and cookies to attempt to use certain sites, at times it will help, other times it wont work period, yet the same exact site will work perfect in firefox (which I do not use, only on my system for use on certain sites for school because in safari prior to the update, I would have issues with only the class site and some links not working at all, no spinning wheel, no errors, just nothing, no response of any kind, basically worse than what it was before the update). Another issue, hit Ctrl+a to select inside Safari and it highlights, but then when you click out of the highlight, it comes back on it's own several times without you hitting anything, just click inside the screen on a blank space (no links, etc) with touchpad.
3. System issues: My system is way slower than what it was prior to the update, click on things and it wont respond at all, then minutes later will eventually respond or pops up the spinning color wheel, which it either never responds or takes an extremely long time to respond. And no matter how much I restart, it doesn't help anything. Even just to sit doing nothing, no clicking or usage on the system, and the color wheel pops up.
4. Mail issues: Mail is now popping up completely blank messages that I have sent out, the person receives it with no issues, yet I cannot look at the message I sent neither in the inbox or the sent items when I need to look at them again, an issue not present prior to update. Also I an now having issues when receiving mail, sometimes it will check for mail and sometimes I have to manually click to make it check the server for mail, an issue not present prior to update as well.
As of now, since I have had the chance to used the system since the update, these are the issues I have had, yet haven't had the chance to check other things, so there may be other issues that are occurring that I'm not aware of at the moment. I knew it would be a mistake to do this "free" update and did so anyway and now having one issue after the next with each application I open to use.
Mac general info:
Mac is one year old, purchased brand new, no shareware programs of any kind installed.
Use for school and basic web surfing use.
Do not install any programs onto system that I'm unsure are safe (basically programs for/from school/school websites only, or from the Mac Apps store only), not even programs like Skype, nor any windows based programs of any kind.
Lots of free memory avail because I save everything onto external hard drives (purchased brand new as well, only 4months old) in case system crash occurs, only things on the system is Itunes music or pics from photo stream that sync to the system when Iphone connected.
Mac system info:
- Processor 2.5 GHz Intel Core i5
- Memory 4 GB 1600 MHz DDR3
- Graphics Intel HD Graphics 4000 1024 MB
- Software OS X 10.9
- Number of Processors:          1
- Total Number of Cores:          2
- L2 Cache (per Core):          256 KB
- L3 Cache:          3 MB

For those needing help fixing their system and putting it back to Lion or Mountain Lion, this is what I have done to eliminate all my issues in about an hour (depending on your internet connection).
Amazing thing, I just restored my computer back to Mountain Lion, and she's working perfect again, as I knew she would. E-mail popping into mailbox instantly as it should and did before the update, printer working fast as it was before update, no more freezing or glitches of any kind thankfully and finally. Here is the link that is through the Apple site to direct you on how to put your system back and get rid of Maverick's, that is assuming that is what you would like to do and also includes link for those wanting to try fixing the issue if that is your preference (most of this info is for those with mountain lion and some with the previousverisoin of OS X lion).
If you want to keep Maverick's here is a good post on the apple discussion board to help you out:
https://discussions.apple.com/docs/DOC-6161
If you just want to totally get rid of it and put back what you had before, this is the short version of how to do so:
https://discussions.apple.com/docs/DOC-3353
NOTE: This particular link has a lot of info on what to do for different situations, it is a bit lengthy, yet still very helpful.
OS X Mountain Lion: Reinstall OS X (direct from Apple support site, not someone else):
http://support.apple.com/kb/PH10763?viewlocale=en_US
OS X: About OS X Recovery (also from apple support directly and includes some instructions just the same as previous links above):
http://support.apple.com/kb/HT4718
Just in case you aren't sure what it will all look like as you are doing things, this is a link to show you a few pics of what you will see as you as you are going through the process, it can be helpful for those who aren't sure what they are doing or how to do things at all:
http://www.apple.com/osx/recovery/
This is a way to download the Mountain Lion disk info from the server
http://support.apple.com/kb/DL1433
I hope this helps someone, it was amazing for me and my system is working perfect again like it was, battery life is way better went from like 3 hours to like 5 (not on full charge by the way, after it sat for a while doing the online update which took a while so that's saying something alone, huge improvement). I plan to wait a while before attempting to reinstall Maverick's, long enough for them to fix the bugs.

Webi base on BW query based on Infoset comes back with wrong values

Hello:
I have a Webi report on an OLAP Universe, on Bex Query.
The bex query is based on 1 INFOSET.
When I run the webi report the values that comes back a totally wrong values.
The correct results are not brought back.
When I do a test with crystal reports to the infoset, I can see the correct values. (I'm aware crystal uses different drivers).
The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
Webi on Infoset based BW Query comes back with wrong data.
query is simple.
Pull in 3 attributes, 3 key figures, where componentkey = "111"
I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
I get many rows in webi (almost like a CARTENSIAN product).
I search a round this forum but still did not see a conclusive answer to this problem.
But I see another thread that several others faced this same issue without a resolution.
My environment.
BOE XI 3.1 SP2
No fix packs
SAP IK 3.1 SP2
HPUX-IA64
Thanks in advance for any help.
Dwayne

Was this problem ever solved?
I am having a similar problem with an infoset based query.
I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
Cheers,
Andrew

Multiple Issues with Adobe Creative Cloud app.

I'm having multiple issues with the Adobe Creative Cloud app.
1. Neither Photoshop CC nor Prelude CC get past the 47% mark when installing. They constantly give me "Installation Failed" messages. When I click on "Learn More", I'm told that:
"Installation Failed
Errors during Installation.(7)
More Information"
So naturally, I click on More Information to get the following thrown at me (none of which I understand):
Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ERROR: 12/01/13 13:16:06:425 | [INFO] | | OOBE | DE | | | | 6076 | ---------- CustomHook_Helperx64 ---- Start ---------- 12/01/13 13:16:06:426 | [ERROR] | | OOBE | DE | | | | 6076 | Cannot load function name 'CSInstallerCustomHookProc' from library C:\Program Files (x86)\Common Files\Adobe\Installers\uninstall\{5F816B76-62F3-41C9-B651-27F49F25F50B}.data. Error 0 ERROR: System check returned with error : -4 -------------------------------------------------------------------------------------
2. I installed Lightroom 5, then uninstalled it. When I went back to re-install it, the Adobe Creative Cloud app wouldn't let me. It states that my Lightroom 5 is "Up to date" and is in my "Your Apps" section, not in the "Find New Apps" section. I've double checked my Programs and Features in Control Panel, and it's not there. I cleaned my registry, and it's still there. I deleted the "opm.db" file in my OOBE folder, and restarted CC - still nothing.
I've got to say, guys. I'm not very happy with the amount of time I've spent just trying to install programs on my PC. While the plan is for this to be intuitive at some point, it's not very functional at the moment. Any help you can provide me would be amazing - if you can provide it sooner than later, I'd be over the moon.
Thanks.

I fixed it. I fixed it on my own. My journey took over a week (forty hours of back and forths, trial and error, and service!!) and included multiple calls, multiple online chats, unanswered forum posts, Twitter conversations with the Adobe Customer Service team, remote access sessions with Adobe technical teams, and finally this series of emails. In the end, I had to figure it out myself. I'm not happy - not with the time it took, and not with the level service I received based on the urgency that I made clear.
For anyone else that had this issue (or similar), here is what I did to fix it. This may seem excessive, but that's because I didn't know what else to do. Some of these steps may be redundant, or not required... but I wouldn't know because once I saw that it was working, I just kept going.
Anyway, here is the solution I came upon (I'm running Windows 7 64-bit):
1) I uninstalled every single Adobe product (including Flash Player, Acrobat Player, Air, and Digital Editions).
2) I ran the Cleaner Tool (which is not very good) and came across errors in trying to delete certain folders.
3) I restarted my computer in Safe Mode, and logged into Windows 7 under my Administrator account.
4) I manually went into every folder that contained the words "Adobe" and deleted everything. This includes my Program Data folder, my Program Files folders (both x86 and 64-bit), my AppData folders, my Roaming folders, my Temp folders - ANYTHING and EVERYTHING that contained any trace of Adobe, I deleted.
5) I ran Microsoft Disk Cleanup and Piriform CCleaner to clean my registry and temp files.
6) I restarted my computer using the normal boot process and logged into Windows as Administrator.
7) I downloaded the Adobe Creative Cloud installer.
8) I restarted my computer again, and logged into Windows as Administrator.
9) I ran the Creative Cloud installer, and installed Premiere Pro.
10) I restarted my computer again, and logged into Windows as Administrator.
11) I ran the Creative Cloud installer, and installed Photoshop.
12) I restarted my computer again, and logged into Windows as Administrator.
13, 14, 15...) I ran the Creative Cloud installer and installed whatever programs I needed, then I IMMEDIATELY restarted my computer before installing anything else.
Hope this helps. Good luck!

Pre-n enabler seems to cause issues with lock up/beach ball

I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
UGGHHHHHHH!!!
Peter

I have this same problem. I reported a bug to apple bug id#4990056
Here is what i wrote:
10-Feb-2007 10:36 PM Brooks Roy:
Summary:
I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
Steps to Reproduce:
With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
I do not have any special configuration on my linksys, just MAC based wireless authentication.
When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
Expected Results:
I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
Actual Results:
See above.
Regression:
It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
Notes:
I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

VirtualProvider based on DTP- An issue with 0FI_GL_10

Similar Messages

Maybe you are looking for