VirtuelPC driver for NI-CAN PCI Cards?

Hi
I could be great if there where a NI-CAN PCI driver usable in a VirtuelPC. We do use VirtuelPC's i our company (ex. in the test area), and the abillity to share a NI-CAN PCI card from the host machine with the virtual PC could be a great feature.
Is there any posibility that this feature will be released in the future?
/Thomas

Hi Thomas,
National Instruments' LabVIEW is supported by Virtual PC. This means that a customer will be able to access his LabVIEW files on the Windows partition on his Macintosh machine. However, we still do not have DAQ driver support or NI-CAN support for Virtual PC.
You are wellcome to make this suggestion at our product suggestion center: http://digital.ni.com/applications/psc.nsf/default?openform
Thanks!
Dennis Morini
Field Sales Engineer
National Instruments Denmark
http://www.ni.com/ask

Similar Messages

Need new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

Any one know where i can get the new driver for nVIDIA 7900GTX graphic card (OS : Mac OS X 10.4)

http://www.nvidia.com/object/7seriestechspecs.html
Pls visit above nVIDIA web page.
based on NVIDIA web pages, 7900GTX supports MAC OS X.
but .....seems not so far.

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Device Driver for Quick Can

I want to use quick CAN for the project using LabVIEW .So I need the device driver for Quick CAN so that ,I can interface with LabVIEW.Is there a Driver for Quick CAN for LabVIEW ?
Some Detail on Quick CAN
http://qprotos.com/quickcan.htm

Wow that looks like a piece of junk. You get what you pay for, and that goes for driver support as well. If you bought a NI CAN device or XNET you'd have all kinds of support from this forum trying to help you out. Heck even a Vector device has some love on this forum. And Intrepid has drivers for their hardware in LabVIEW...it needs some attention but it exists.
I say read the documentation, write a set of VIs to talk to the device, and post here if you have any general questions about writing drivers.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
Thanks

Hello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN

Driver for PCMCIA-CAN series 2 card needed

Looking for the driver for the PCMCIA-CAN series 2 card.......
Solved!
Go to Solution.

Not sure what version is needed, but this may get you started:
http://search.ni.com/nisearch/app/main/p/ap/tech/pg/1/sn/ssnav:sup,catnav:du,n13:hardwareDriver,n8:2...
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

No driver for Airport Exteme WLAN card working in Windows Vista (32bit)

Hello,
Fairly recently I had an Airport Extreme card installed into my Mac Pro. Of course everything works on the Mac side and the card appears with the following info:
Wireless Card Type: AirPort Extreme (0x14E4, 0x8E)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.35)
Current Wireless Network: XXX
Wireless Channel: 1
Under Windows Vista Ultimate (32bit) the card comes up with the following hardware ids:
PCI\VEN14E4&DEV_432B&SUBSYS_008E106B&REV01
PCI\VEN14E4&DEV_432B&SUBSYS008E106B
PCI\VEN14E4&DEV_432B&CC028000
PCI\VEN14E4&DEV_432B&CC0280
The Leopard DVD does not seem to contain any compatible drivers for Windows using Bootcamp for this card. I am really struggling to find a driver that works. The card is listed as 43XX in OS X, and by the Windows hardware ids it seems to be a 432B? I've tried third party drivers for this Broadcom chipset range and nothing will work and even detect a compatible card installed.
Surely there is a working Windows Vista driver for this Broadcom chipset? Does anyone have any suggestions?
Thanks!

thanks for replying..... I'm using the latest driver from the site X.0004 for the x-fi xtremegamer fatality pro. The Sound card is detected just fine. The card shows up correctly, but its just that there are no sound coming out from any of the line out. If I play an mp3 or a movie, I can see that the bar is moving under "Sound" in control panel. I've tested it using headphones etc. The card itself is fine because I tested it on windows xp, well the store where I bought it from did. So its not a hardware problem.

Wattage for Apple-installed PCIe cards

The MacPro PCI system is limited to a total of 300 watts. My new MacPro had the Apple RAID card and the ATI Radeon X1900 XT card preinstalled. I need to know the power consumption (Watts) for each of these cards, so that I can determine what other PCIe cards I can install. What are the Watt figures for each of these cards?
Thank you
NB

An excerpt from bare feats...
*RUNNING TWO RADEON X1900 XTs
We know of at least one university running two Radeon X1900 XTs in their Mac Pro. They are using them to drive three 1920x1080 projectors. I'm not sure now many Mac Pro users would want two X1900s in their Mac Pro but there are two things you should know if you do:
1) The PCI Express bus can handle a total of 300 watts. Each Radeon X1900 XT requires a peak of 132 watts. So two of them equals 264 watts. You should be okay if you don't add any other PCIe cards -- especially since both cards are pulling power from the special six pin motherboard connector instead of the bus!
2) To get the best performance from both high-end cards, we recommend installing the second X1900 in slot 2 (since slot 1 is double wide) and using the Expansion Slot Utility (in System/Library/CoreServices) to configure both slot 1 and 2 to run in 8 lane (x8) mode. (Though slot 4 can be configured to run at x8 with slot 1 running at x16, the X1900's heatsink is too thick to allow it to fit there. And slot 3 can only be configured as x4.)*
I don't think Apple has as publicly stated cower consumption for the RAID card. Less than 80 Watts Max would be a good guess.

Driver for 3csoho100b-tx LAN card

I searching desperately for a driver for my 3com 3csoho100b-tx LAN card, I have searched Google and several forums but there doesn�t seem to be one available. I know on Linux I can use the tulip driver is there anything similar on Solaris 10??

What happens when you type "ifconfig -a" (while logged in as root to your solaris installation)?
Linux driver won't work.

Video display driver for Trident Cyber9525DVD PCI/AGP (W98.23)

I am having problems finding a suitable (generic) driver for my video card. I'm installing Solaris 8 for Intel on an Acer Travelmate 330T laptop with a Trident Cyber9525DVD PCI/AGP (W98.23) display adapter. The installation was successful but it just couldn't get into the CDE. Could anybody help me? Thanks.

Hi:
See if this driver works. If it doesn't, you will need to install a 64 bit operating system if you want to run windows 7.
I know this driver works for the Celeron N processors, but I don't know if it will work with the Pentium N processors.
Download, unzip and run the setup.exe file.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23889

Leopard Driver for the X1900XT Video card?

Is there a Leopard version driver for the Radeon X1900XT Video card?
If so, where can I get it?

Hi:
I cannot find any info on a model 061.
Please use this guide to find the model number.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en
If the PC was made before 2005, there are probably no graphics drivers available for W7 or Vista.

NI driver for Sonix STR8100 D card

I have Sonix STR8100 that works with DOS-based digital oscilloscope
software and want to upgrate to a driver for LabVIEW.
Thanks

The windows hardware driver for this card would only be available from the vendor. If it is a dll, then you can use the LabVIEW Call Library Function Node to access the dll.
p.s. You posted to the wrong board. This board is for the NI DDK (Driver Development Kit) which allows you to write your own driver for an NI DAQ board.

Windows 7 driver for GeForce 320m Graphic Card and Broadcom wireless card

I just got my 11" MacAir (2011)and installed Windows 7 on it using Parallel software. Everything works fine except for the driver for the Broadcom BCM 43xx1.0 airport wireless card and for the GeForce 320m graphic card. Windows 7 cannot find the drivers. I have tried everything to find a solution: Downloaded the drivers from the Broadcom and NVIDIA websites, used the drivers that came with bootcamp and made changes to the nvao.inf file for the graphic card problems but nothing works. Does anyone know a solution to these problems? Many thanks.

Hi,
since Parallels is not an Apple product it would be better to use their own Support resources.
However, Parallels does not use the native (real) hardware of your Mac but virtualizes certain hardware.
The video adapter is a "VGA and SVGA with VESA 3.0 compatible Video Adapter" and the WiFi is mapped to a "Ethernet Virtual network card compatible with RTL8029".
For these virtual devices Parallels brings all drivers with it and names them "Parallels Tools" which you have to install manually while in our Parallels Windows virtual machine.
Refer to the Parallels User Guide http://download.parallels.com/desktop/v6/docs/en/ParallelsDesktop_UsersGuide/
Regards
Stefan

Driver for Linksys Wireless-N CArd

Hi
We need drivers for A Linksys card for the G5 , The card is WMP300N...HELP?????
We can't find anything...
Any help is greatly appreciated
Liz

Hi Steve Webster-
There aren't any Mac drivers as that card is for a Windows machine.
Luck-
-DaddyPaycheck

How can I find NI-488.2M driver for my GP-IB card?

I am a test engineer.

Hi,
You can determine the appropriate driver version for your OS/Hardware combination using the table at:
Current GPIB Driver Versions (NI-488/NI-488.2)
DiegoF
National Instruments.

VirtuelPC driver for NI-CAN PCI Cards?

Similar Messages

Maybe you are looking for