Virus Barrier X6 causing problems with Lion 10.7.1
After posting in these forums that third party installation software launches spontaneously with Lion 10.7.1, I'd like to share my experience with Virus Barrier X6 ver. 10.6.14.
I found the latest update from Intego Virus Barrier (dated Sept. 29, 2011) has problems with OS Lion 10.7.1. When it scans installation files, (e.g. .dmg files from Apple or third parties), it unpacks them but then has problems closing and ejecting opened .dmg files. Specifically, only after updating Virus Barrier X6 definitions to the Sep. 29th 2011 definitions, installation files opened onto my desktop whenever Virus Barrier scans for viruses.
Whether this is related to other problems reported with Finder in Mac OS Lion 10.7, or if this is a problem for Apple or Intego or both to solve, I don't know. I hope someone fixes it though.
Mac OS 10.7.1
Intego Virus Barrier X6, 10.6.14, update 9/29/2011
@babowa - Interestingly, I tried ClamXav prior to using virus barrier and the problems you mention (regarding antivirus software proflems), ironically, are issues I had only with ClamAV. It turned my computer into a slug whenever running scans, which I just couldn't work with. VirusBarrier runs very well for me.
I have run ClamXav on my Mac for many years, without the problems you indicate. It is mainly to satisfy some network requirements for an antivirus to be installed, such as university campuses and the commercial environment.
I once tried an early version of Sophos anti-virus which slowed everything down. I think antivirus software taken from the PC environment and hastily adapted for the Mac market are generally not good.
Why don't you take the matter to the Intego forum, where it belongs?
Tycoon24 says "Then if your computer has somehow mysteriously imploded before being vaporized under its own pressure due to Intego's Mac anti-malware software - maybe try ClamXav and according to babowa things should magically become stable:"
While I admire your obvious ability at hyperbole, I appreciate your underlying idea, that there may be other issues with the poster's computer that could be affecting it's use with any antivirus software.
Similar Messages
-
Startup problem with Lion OS 10.7.3
Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
Any thoughts? Thanks -Thanks -
I've reinstalled the OS today and am back up and running.
But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X. -
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2,66 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 6 GB
Bus Speed: 1,33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10
Serial Number (system): CK7XXXXXXGP
Hardware UUID: 00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version: Mac OS X 10.7.5 (11G63)
Kernel Version: Darwin 11.4.2
Boot Volume: Macintosh HD(2)
Boot Mode: Normal
Computer Name: Mac Pro van Juko de Vries
User Name: Juko de Vries (jukodevries)
Secure Virtual Memory: Enabled
64-bit Kernel and Extensions: No
Time since boot: 11 days 20:39
Message was edited by HostJava 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties. -
Problem with Lion 10.7.3 with hp laserjet 3600n network printer
Hi
Problem with Lion 10.7.3 with hp laserjet 3600n network printer
Guys i am having a mad day with this new OS and some network printer none of them work with new LION,The software for this printer is currently unavaliable. Please contact the printers manufacturer for the latest software, i need the drivers for this, please give a hand with this issue
Best RegardsExactly the same infuriating problem we and many others get with OS X from 10.6 on when Apple dropped Apple Talk.
Having spent days fighting to get drivers that will run our older laser printers like HP5000, 5100, 2100, 2200 and 4MV, we came up with a simple solution:
We use an iMac running 10.5.8 as a print server. All the 10.6 upwards Macs on the same network will see and add the printers immediately through the shared older (Apple Talk) iMac.
Cheapest and simplest option really .... it'sannoying that a brand new Mac can no longer see existing network printers without complex investigation and trying various downloads.
Answer is simple and cheap if you happen to own a 4 or 5 year old Mac with an OS lower than 10.6 which still has Apple Talk. -
If I install the update to Adobe Reader 10, will that cause problems with Acrobat Pro 9?
Firefox (version 15.0.1) is telling me I need to install an update to Adobe Acrobat 9.4 in order to view pdf files in my browser. I use Acrobat Pro 9. The update is actually Adobe Reader 10, and I am wondering if I install this, will it cause problems with my version of Acrobat Pro?
Because I am not sure if this is so, I have temporarily disabled the plug-in and now pdf files download automatically rather than display in my browser. I would prefer they open in my browser but do not want to upgrade to Acrobat X.
My OS is Windows Vista. I did not include the "troubleshooting information" file because I'm not sure what specific info is being requested.
Thanks for any help.Hi WMdotcom
did you try to view pdf with your acrobat pro 9 ?
see
[https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
[https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types
Set how Firefox handles different types of files]
thank you -
Reduce folders in Windows 7 for pictures without causeing problems with PSE11
I want to simplify my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.
19441965 wrote:
I want to simplify my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.
The only way to move files or folders/subfolders without causing problems, that is not creating 'missing files' is to do this from within the Organizer, not the OS (Win/Mac).
You can create folders and move pictures from the Organizer.
Note that if you are moving the files of several subfolders into a single one, you run the risk of wanting to move files with the same filename into the same folder ; your OS won't allow that. So the Organizer will rename pictures if needed.
If you want to do such a big reorganizing task, absolutely do a full backup before. There is no advantage for such a reorganizing from an Organizer point of view, but if you need it for some reason, it has to be done from within the organizer. -
I need to download dell drivers to a jumpdrive connected to my iMac. Will this cause problems with my Mac?
Thanks. These drivers are for the audio, etc. for a dell laptop I purchased used. ( Needed something cheap for a training video that would only run on Windows. Tried Emedia player but picture was too fuzzy.) Dell support said I should contact Apple support for instructions on how to get the drivers onto the jumpdrive. Any tips on doing that?
-
my host name changes every few days, since Xmas adding a macbook its changed 6 times. Do I need to stop this? Does it cause problems with sharing between the iMac and macbook?
There are several possible causes for this problem.
1. Two (or more) computers on the local network have the same Bonjour name, such as "X's-MacBook-Pro.local".
2. You have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. If applicable, disconnect the Ethernet cable or turn off Wi-Fi.
3. A Mac wakes from sleep due to network traffic. This is due to a bug in OS X that may only affect some models.
4. A device that gets its network address from the router wakes from sleep, and the address it was using before has been assigned to another device.
5. A third-party wireless router has incompatible settings or firmware. In that case, refer to the manufacturer or ISP for support. Restarting the router may help, temporarily.
6. See also this support article.
Rename the computer in the Sharing preference pane. -
Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1
have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected] -
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?
gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening? -
Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...
I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson -
WE + CE cause problem with accented characters
While creating a CFF font which contains the WE as well as the CE character set, it causes problems with most of Adobe programs (Photoshop 7, Illustrator 10, Photoshop Elements 2.0) under Mac OS X. Problem: the accented characters get replaced by Helvetica (Photoshop) or Myriad (Illustrator). Only InDesign treats it right.
I tested under Mac OS X 10.2 as well as 10.3; no difference. I tested on 'old machines', but fresh machines as well (machines which didn't have the fonts installed before); no difference. All the same problem.
Deleting the CE characters solves the problem, but yeah, I want to create a CFF font which contains both character sets.
Generating the font in FontLab or FDK doesn't make any difference.
So, what's the solution? Sounds like a mystery.
BasTwo comments:
OpenType/CFF fonts should work to some degree on versions of Mac OS from 8.x on. "Some degree" means that pre-Mac OSX, you need ATM for them to work, and you only get the Roman char set. On Mac OSX, Unicode savvy apps will give you access to the entire charset, but at the moment only Adobe apps support any OpenType features.
About your problem with CE charset: this is a known problem, and is still a mystery. Adam Twardoch has reported the same problem and has supplied some test fonts. I have spent over a day looking over the fonts, and looking into old code, and can't find any problem in the font data. Investigating further is likely to be a several day effort, and will happen, but not soon. -
My MacBook Pro, 1.83 GHz Intel Core Duo gives me an error message during Lion install. My Intel Duo Core is not an Intel Duo Core and cannot install Lion. I already have Snow Leopard what is the problem with Lion?
You need a "Core 2 Duo" for lion, and I'm guessing you only have a "Core Duo" My wife's macbook is also a "Core Duo" and has Snow Leapord, but cannot install Lion.....
-
Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?
Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.
Maybe you are looking for
-
Hiding a column in BSP based on user
Hi, I have a requirement in which user enters into PCUI Screen in EP Portal where there is button which displays a BSP Page. Now depending on user the page should differ. i.e if user is manager he should see a different page on clicking the button an
-
My Post not showing up in "My Posts"
I posted a thread "keychain - different passwords for two areas of google.com" in "Tiger Forums > Using Mac OS X Tiger" over 45 minutes ago, but when I click "My Posts", it does not show up in the list. Why?
-
How to increase/decrease text size in CS5?
I came straight from DW MX and in CS5 if I want to, for example, change the font size just for one line in an article already published, I don't see a way to do it. At the bottom under Properties, I can select "CSS" and see the font size, but it want
-
I have found with iTunes 11 that to move music over on my iPod it works very well and shows the 'on this iPod' button when you click on the device. With my iPhone however, you can click on iPhone but then there is no 'on this iPhone' button or the ad
-
Is there any way to have two portlet regions on the same page have 2 different styles? The only thing I've found indicated that you could change the background. I'd also like to change the header and font colors as well. Is this even possible?