Virus Call "Online help - Perform System Maintenan...

I received a skype call from "Online help - Perform System Maintenance" and when I answered the phone, it was a computerized voice that started discussing that my computer, which happens to be a mac, is not running "very well." Is there a way to drop a virus through a Skype call? I quit and restarted Skype. How do I block this number/caller? I have Sophos anti virus on the my mac, but maybe this is a skype only virus...or something designed for windows. Very odd. Can anyone assist?

This is a known scamming.
To avoid receiving any Calls like this, you can adjust your privacy to, Change Allow Calls from... "anyone" to "people on my Contact list only".
http://community.skype.com/t5/Windows/Does-anyone-know-what-quot-sys-help-bn3-quot-is/m-p/967658#M71...
You may also block and report the scammers.
https://support.skype.com/en/faq/FA10488/how-do-i-block-or-report-a-contact
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Similar Messages

:*** ONLINE HELP - PERFORM SYSTEM MAINTENANCE! - ...

Can anyone advise if this is a genuine call - it is automated

This is a well known scamming and phishing attempt.
To avoid receiving any calls like this, you can adjust your privacy to, Change Allow calls from... "anyone" to "people on my Contact list" only.
http://community.skype.com/t5/Windows/Does-anyone-know-what-quot-sys-help-bn3-quot-is/m-p/967658#M71...
you may also block and report the scammers.
https://support.skype.com/en/faq/FA10488/how-do-i-block-or-report-a-contact
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

"Online Help - Performance System Maintenance! (ss...

This keeps asking me to accept as a friend. Is this a legitimate Skype request?

It's a well known and well documented SCAM.
IGNORE.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Does Skype ever call customers to perform online m...

Last night I had a call come in from an account named 'ONLINE HELP - PERFORM SYSTEM MAINTENANCE!'.
I ignored the call as it seemed dodgy to me.
Can you please confirm if Skype ever calls customers for this reason??
Thanks.

This is a known scamming.
To avoid receiving any Calls like this, you can adjust your privacy to, Change Allow Calls from... "anyone" to "people on my Contact list only".
http://community.skype.com/t5/Windows/Does-anyone-know-what-quot-sys-help-bn3-quot-is/m-p/967658#M71...
You may also block and report the scammers.
https://support.skype.com/en/faq/FA10488/how-do-i-block-or-report-a-contact
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Online Help for Oracle HRMS Self Service System

I am looking into developing context-sensitive online help for an Oracle HRMS Self Service application. There is currently no online help for the application; all help is provided in printed and online docs, so users are having trouble navigating to the info they need. Help is needed! My initial questions are:
Would I need to create OHJ or OHW?
Could I use RoboHelp to develop the content?
Is there a reference document you can point me to?
Thanks
Belinda

Hi Belinda,
You would create Oracle Help, and then deploy it using OHJ or OHW.
The format of the help is the same. There is nothing specific that needs to be done for one or the other. If your system i s a Web application, you would use OHW and otherwise, you would use OHJ.
You can read more about Oracle Help on OTN at http://www.oracle.com/technology/tech/java/help/index.html.
(Read the FAQ for more information about the choice between OHJ and OHW.)
Personally, I would not recommend RoboHelp to create Oracle Help. RoboHelp has a lot of nice features, but the Oracle Help output feature is fairly buggy, especially if you are creating a large helpset, or a helpset that has subhelpsets.
At Oracle, a lot of help development is done using DreamWeaver and an in-house build tool, called the Oracle Help Build Tool. This is available for free. Send me a mail ([email protected]) if you want a copy.
Regards,
Pete

Web 2.0 Online Help System

Hi,
I'm currently using RH 8 to generate WebHelp for various web-based applications. Unfortunately, the help system's appearance has been deemed outdated. I've been tasked with finding an online help solution that provides a cleaner appearance with a blog-type feel that provides a web 2.0 experience. I've provided a few sample online help solutions below.
Sample solutions:
[http://support.twitter.com/ | http://support.twitter.com/] (sans tweets)
[https://support.skype.com/en/ | https://support.skype.com/en/]
I would be more than willing to update to the latest version of RH if it can deliver this type of solution. Although all suggestions are welcome, the ideal solution should not require a client installation.
Thanks!
Joe

Hi Joe
As my fellow Community Professional Craig indicated above, the two examples do appear to be themed to match other elements of the sites.
Additionally, RoboHelp 8 doesn't offer a simple "make this single option choice" sort of way to create what you are asking about. But that doesn't mean it can't be done with a bit of work. If you were to upgrade to RoboHelp 10, it offers some new HTML 5 layouts that may offer something close to what you are looking for.
If you want to stick with RoboHelp 8, what you might to to get something similar to the Twitter page would be to eliminate everything but the Search field. Then eliminate the left navigation panel. You might even need to consider using ZoomSearch as described on fellow Community Professional Peter Grainge's site at the link below:
Click here to view Peter's site
If you omit the navigation frame as earlier described, you would then need to create a "home" page with links that point to the other pages.
Hopefully this helps... Rick

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

No need to apologize, Jim. I think your rant was justified. For years people have been telling me how easy the Mac was to use. Imagine my frustration when I finally learned from friends and users that it takes weeks or months to make the transition from Windows to Mac.
Still, I agree that I acted to too hastily when I returned my mini-mac to the store only three days after I bought it.
I'm going to try again, this time with an iMac. This time I'll keep it. Since this thread is for the mini-Mac only, I'll probably be starting a new one for the iMac.
Why did I decide to try again? Well, I do like the faster speed and compact hardware of the Macs. I also like the fact that I can install Windows and use that for my programs until I transition completely to Mac, IF I make the complete transition.
Thank you all for your suggestions and advice. I have paid attention to what you said.
Andy

Online Help System for Web Apps

Hi all,
Does anyone know a good and free online help system for Java webapps, I've tried Oracle Help for the Web and it's nice, except that it won't run on WebSphere v5.1 (which is a requirement).
Thank you,

Hi Len
Basically it's like this. WebHelp is nothing more than a collection of HTML pages that each contain different "Topics". This means that each page has a unique URL which may be used to view it. Normally, WebHelp is presented with the surrounding frameset (also known as the Skin) and the Topic is shown in the Topic pane of the Frameset.
What Jeff has shown is what you might get if you just link to the URL of the topic. I say *MIGHT* because whether you see the "Show" link is configurable and you can generate WebHelp where it's not factored in.
So you have many options of linking to your help. You can link to a single topic where only that topic appears. You can link to the WebHelp generically and the end user finds their own way to the information they are looking for. You can link to a Bookmarked location inside a topic either on its own or within the frameset. And if you are using the WebHelp API, you can specify your own Window that will be used. Otherwise, your developer can create the window using their own means.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Calling search help in SRM system

Hello all!
I have a problem with using the functional module F4IF_FIELD_VALUE_REQUEST in SRM system. I need to call search help by this function module and retrieve output parameter. If Ive connected by SAP GUI all works splendid, but in HTML environment a behavior of this FM is very strange. In the HTML connection after Ive select the subordinate search help for selection criteria field search help becomes disappeared and main screen becomes shown as modal (sic!) window.
Does anybody know how to avoid this?
This is piece of code with FM call
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'ZSRM_002_SCR_REQITEM'
      fieldname         = 'PRDID'
      searchhelp        = 'COM_PR_COLLECTION'
      shlpparam         = 'PRODUCT_GUID'
      dynpprog          = 'SAPLZSRM_PP_SELECT_SCREENS'
      dynpnr            = '9003'
      dynprofield       = 'ZSRM_002_SCR_REQITEM-PRDID'
    TABLES
      return_tab        = lt_return
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
Best regards and thanks in advance.

Is my explanation not clear or nobody knows how to win this problem?

Creating an online help system from FM files

I have been tasked with converting a 340 page user manual in
FrameMaker into RoboHelp in order to create an online help system.
I have imported all the FM files into RoboHelp. Each Project
file is a chapter from the FM user manual and each topic is a
subchapter.
Many of the images crossed over successfully. However, many
came across blurry and others didn't come across at all, instead
appearing as a small red box.
I have been unable to figure out how to get the images that
did not come across into RoboHelp.
After compiling and viewing the primary layout - it looks
pretty good (at least to me). The font and styles in RoboHelp are
the same that were in FM.
I am VERY new to RoboHelp and have learned FM primarily
through trial and error with some outside instruction.
I need help in getting the images into RoboHelp and some
advice on whether or not I am on the right track with my online
help system.

Hi there Not User Friendly!
Can you give me an URL showing me your online help?
Im about making two huge online help systems, but im new to
Framemaker and RoboHelp.
One of them contains thousands of pages mades in Framemaker,
the other one is going to be made from scratch.
If you have any advices etc, I would welcome them a lot.
Thanks in advance

The InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and where can I find a description of this function?

the InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and what does she do?and where can I find a description of this function? Can i use this function with visualc++ 6.0?

The InitCVIRTE function is in the CVI run time engine (cvirte.dll)..not part of NI-DAQ.
Applications written or using CVI may call this function..
How are you running into this ?
From the CVI help...
This function performs initialization of the CVI Run-Time Engine. It is needed only in executables or DLLs that are linked using an external compiler. Otherwise, it is harmless.
It should be called in your main, WinMain, or DllMain, function. The parameter values you should pass depend on which of these three functions you are calling InitCVIRTE from. The following examples show how to use InitCVIRTE in each case.
If you are using main, your code should be as follows.
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are using WinMain, your code should be as follows.
int __stdcall WinMain (HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpszCmdLine,
int nCmdShow)
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are creating a DLL, you must call InitCVIRTE and CloseCVIRTE in your DllMain function, as in the following.
int __stdcall DllMain (void *hinstDLL, int fdwReason,
void *lpvReserved)
if (fdwReason == DLL_PROCESS_ATTACH)
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
/* your other ATTACH code */
else if (fdwReason == DLL_PROCESS_DETACH)
/* your other DETACH code */
CloseCVIRTE ();
return 1;
NOTE: The prototype for InitCVIRTE is in cvirte.h, not
utility.h.
NOTE: In CVI 4.0.1, this function was expanded from one to
three parameters. Executables and DLLs that were
created using the one-parameter version of the function
will continue to work properly.
/*-------------------- Prototype ---------------------*/
int InitCVIRTE (void *HInstance, char *Argv[], void *Reserved);
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Does anyone use RH7 for online help on their websites?

Hi,
I'm finding that this product isn't usable for online help
within a website. Using the RH_ShowHelp() JavaScript calling
convestions triggers popup blockers on most of the major platforms
(Windows/IE, FF, Mac/FF). I don't understand why this is happenning
since the help and the page that links to the help are in the same
domain. Requiring customers to manually reconfigure their popup
blockers is not a viable solution.
On the one where it works (Mac/Safari) I'm left with a very
tiny window in the lower right corner. Expanding it shows the help,
but the page in the content pane is the file-not-found page
(clicking items in the navigation brings up the correct page). I'm
also seeing on the Mac (FF & Safari) that the Index &
Search areas aren't searchable like they are in Windows (no input
box to search with).
When we asked Adobe about this the answer was more or less -
"that's how it works" and they gave us a link to the following page
detailing the limitations by browser (notice that it hasn't been
updated since 2004 and the newest IE is IE4).
http://kb.adobe.com/selfservice/viewContent.do?externalId=rb_69353b&sliceId=2
I was hoping there would be a new RoboHelp_CSH.js file (it's
dated 2004) Ideally one that didn't rely on browser sniffing but
instead checked for JavaScript capabilitites.
We missed testing this part when evaluating the product and
now it feels like a dead end.
Needless to say we've started moving on to other help
systems, but maybe someone can help save RH for us before we write
it off completely.

Welcome to our community, wjens
Hopefully you realize that you aren't forced to use the
WebHelp API to establish links to help.
Take a look at the following links:
Link
one
Link
two
Hopefully something here helps... Rick

Call Oracle Help for Java in Oracle forms running in the web

Hi, everyone,
We are developing a web-enabled Oracle database application
system. Oracle suggested us to use Oracle Help for Java(OHJ) to
create an online help system for the web environment. We
successfully created a OHJ program which can be independently.
But we still have no idea how to call this OHJ program from the
forms running in the web environment.
Could anyone help us out?
Thanks.
null

I would like to know if anyone has been able to do this too. Could someone respond if they have successfully gotten this to work?
Thanks!!

Forms 9i ---- Online Help not working

Hi !
Suddenly on my computer forms9i's Online help is not working? when i click on Help-->online Help option it gives error message FRM-18105 : Failed to Start Help System in a alert. Day back it was working fine.
Any idea about it???
Regards,
Neeraj

Thanks Frank !
I have change some path setting to use webutil but i am still unable to use it. I am getting same error WUC-015. due to this help is not working here i am sending u current path setting.Please tell me what is wrong with it..
Classpath variable of windows
==============================
c:\ora9i\jlib\bigraphbean.jar;c:\ora9i\jlib\LW_PfjBean.jar;c:\ora9i\jlib\bigraphbean-nls.zip;c:\neerajtyagi\webutil\lib\webutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\neerajtyagi\webutil\lib\demo90.jar;c:\ora9i\forms90\java\f90all.jar
Path variable of windows
==============================
c:\ora9i\bin;c:\dev6i\bin;c:\ora9i\jdk\jre\bin\classic;c:\ora9i\jdk\jre\bin;c:\ora9i\jlib;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Oracle\jre\1.3.1\bin;c:\jdk1.3.1\bin;c:\jdk1.3.1\jre;c:\jdk1.3.1\lib;c:\jdk1.3.1\jre\bin;c:\jdk1.3.1\jre\lib;c:\Inprise\vbroker\bin;c:\Inprise\vbroker\lib;c:\Inprise\vbroker\idl;c:\Inprise\vbroker\console;C:\ORANT\bin;C:\Program Files\Oracle\jre\1.1.7\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;c:\centrun;c:\win32\exe;c:\cms\lib;c:\cms\Resource;c:\dev6i\jdk\bin;c:\neerajtyagi\webutil\lib;c:\neerajtyagi; c:\neerajtyagi\webutil
FORMS90_BUILDER_CLASSPATH
==============================
c:\ora9i\jlib\importer.jar;c:\ora9i\jlib\debugger.jar;c:\ora9i\jlib\utj90.jar;c:\ora9i\jlib\dfc90.jar;c:\ora9i\jlib\help3.jar;c:\ora9i\jlib\help3-nls.jar;c:\ora9i\jlib\oracle_ice5.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\jlib\f90srv.jar;c:\ora9i\forms90\java\f90all.jar;c:\neerajtyagi\webutil\lib\weutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\neerajtyagi\webutil\lib\demo90.jar
FORMS90_CLASSPATH
======================
c:\ora9i\forms90\java\importer.jar;c:\ora9i\forms90\java\debugger.jar;c:\ora9i\forms90\java\utj90.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\forms90\java;c:\neerajtyagi\webutil\lib\weutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar
FORMS90_JAVADIR
======================
c:\ora9i\forms90\java
orion-web.xml
==============
<?xml version="1.0"?>
<!DOCTYPE orion-web-app PUBLIC "-//Evermind//DTD Orion Web Application 2.3//EN" "http://xmlns.oracle.com/ias/dtds/orion-web.dtd">
<orion-web-app
     deployment-version="9.0.2.0.0"
     jsp-cache-directory="./persistence"
     temporary-directory="./temp"
     servlet-webdir="/servlet/"
>
     <context-param-mapping name="configFileName">c:\ora9i/forms90/server/formsweb.cfg</context-param-mapping>
     <virtual-directory virtual-path="/html" real-path="c:\ora9i/tools/web90/html" />
     <virtual-directory virtual-path="/java" real-path="c:\ora9i/forms90/java" />
     <virtual-directory virtual-path="/jinitiator" real-path="c:\ora9i/jinit" />
     <virtual-directory virtual-path="/webutil" real-path="c:\neerajtyagi/webutil/lib" />
     <session-tracking cookies="disabled" />
</orion-web-app>
formsweb.cfg
==============
baseHTML=c:\neerajtyagi\webutil\server\webutilbase.htm
baseHTMLjinitiator=c:\neerajtyagi\webutil\server\webutiljini.htm
baseHTMLjpi=c:\neerajtyagi\webutil\server\webutiljpi.htm
baseHTMLie=baseie.htm
HTMLdelimiter=%
workingDirectory=
envFile=default.env
# The next parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x. Put IE=native if you want the
# Forms applet to run in the browser's native JVM.
IE=JInitiator
form=test.fmx
userid=
otherparams=debug=%debug% buffer_records=%buffer% debug_messages=%debug_messages% array=%array% query_only=%query_only% quiet=%quiet% render=%render% host=%host% port=%port% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
debug=no
buffer=no
debug_messages=no
array=no
query_only=no
quiet=yes
render=no
host=
port=
record=
tracegroup=
log=
term=
pageTitle=Oracle9iAS Forms Services
HTMLbodyAttrs=
HTMLbeforeForm=
HTMLafterForm=
serverURL=/forms90/l90servlet
codebase=/forms90/java
imageBase=documetBase
width=650
height=500
separateFrame=false
splashScreen=
background=
lookAndFeel=Oracle
colorScheme=teal
logo=
formsMessageListener=
recordFileName=
serverApp=default
archive_jini=f90all_jinit.jar
archive_ie=f90all.cab
archive=f90all.jar,demo90.jar
webUtilArchive=/form90/webutil/webutil.jar,/forms90/webutil/jacob.jar
jinit_classid=clsid:CAFECAFE-0013-0001-0009-ABCDEFABCDEF
jinit_exename=jinit.exe#Version=1,3,1,9
jinit_mimetype=application/x-jinit-applet;version=1.3.1.9
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0
jpi_mimetype=application/x-java-applet;version=1.3
oid_formsid=%OID_FORMSID%
oracle_home=c:\ora9i
[sepwin]
separateFrame=True
lookandfeel=Generic
[runrep]
forms=c:\neerajtyagi\run_rep
separateFrame=True
lookandfeel=Generic
[ienative]
IE=native
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
[debug]
serverURL=/servlet/l90servlet/debug
default.env
==============
FORMS90_PATH=c:\ora9i\forms90;c:\neerajtyagi\webutil\forms;c:\neerajtyagi;c:\neerajtyagi\webutil\lib
PATH=c:\ora9i\bin;c:\ora9i\jdk\jre\bin\classic
FORMS90=c:\ora9i\forms90
CLASSPATH=c:\ora9i\jlib\debugger.jar;c:\ora9i\jlib\ewt3.jar;c:\ora9i\jlib\share.jar;c:\ora9i\jlib\utj90.jar;c:\neerajtyagi\webutil\lib\webutil.jar;c:\neerajtyagi\webutil\lib\jacob.jar;c:\ora9i\jdk\jre\lib\rt.jar;c:\neerajtyagi\webutil\lib\demo90.jar;c:\ora9i\forms90\java\f90all.jar
WEBUTIL_CONFIG=c:\neerajtyagi\webutil\server\webutil.cfg
form90.conf
===========
# Virtual path mapping for Forms Java jar and class files (codebase)
AliasMatch ^/forms90/java/(..*) "c:\ora9i/forms90/java/$1"
AliasMatch ^/forms90/webutil/(..*) "c:\neerajtyagi/webutil/lib/$1"
# Virtual path for JInitiator downloadable executable and download page
AliasMatch ^/forms90/jinitiator/(..*) "c:\ora9i/jinit/$1"
# Virtual path for runform.htm (used to run a form for testing purposes)
AliasMatch ^/forms90/html/(..*) "c:\ora9i/tools/web90/html/$1"
# Configuration for JServ (if mod_jserv.c is available and not mod_oc4j.c)
<IfModule mod_jserv.c>
# Only configure for JServ if mod_oc4j is NOT available:
<IfModule !mod_oc4j.c>
# Virtual path mapping for FormsServlet and ListenerServlet.
# Purpose: paths to invoke the servlets should be /forms90/f90servlet
# and /forms90/l90servlet respectively.
# We map f90servlet to servlet.if90, and l90servlet to servlet.ifl90.
# The apJServAction directives (below) will then remap those.
AliasMatch ^/forms90/f90servlet(.*) "/servlet.if90"
AliasMatch ^/forms90/l90servlet(.*) "/servlet.ifl90"
ApJServMount /forms90/servlet /forms90
# Let the servlets be called by file extension (e.g /servlet.if90)
ApJServAction .if90 /forms90/servlet/f90servlet
ApJServAction .ifl90 /forms90/servlet/l90servlet
# Prevent access to the Forms Servlets by paths other than
# /forms90/f90servlet and /forms90/l90servlet.
# 1. Prevent access via the .if90 and .ifl90 file extensions:
<LocationMatch ^.*\.if.*90>
order deny,allow
deny from all
</LocationMatch>
# 2. Stop access by class (by paths like
# /forms90/servlet/oracle.forms.servlet.FormsServlet)
<LocationMatch ^/forms90/servlet/oracle\.forms.*>
order deny,allow
deny from all
</LocationMatch>
</IfModule>
</IfModule>
# Config. for OC4J
<IfModule mod_oc4j.c>
Oc4jMount /forms90 OC4J_BI_Forms
Oc4jMount /forms90/f90servlet OC4J_BI_Forms
Oc4jMount /forms90/f90servlet/* OC4J_BI_Forms
Oc4jMount /forms90/l90servlet OC4J_BI_Forms
Oc4jMount /forms90/l90servlet/* OC4J_BI_Forms
</IfModule>

Configuring online help

Hi,
I want to configure online help for my SAP GUI. It is Netweaver 7.0. Can anybody provide me any inputs on this?
Regards,
Sridevi

Hi, I too do not have any Library file installed in my SAP Server, because when I click on Help in GUI and then click on SAP Library, it shows No documentation available.
So I had went through your given following steps, but still I am getting the same error
Login into SAP system (DEV) with user having auths as sap*/DDIC in client 000 or production client
Client should be Open
Run transaction SR13
PlainHtmlHttp TAB selected
Clicked on "New Entries"
Variant: SAP_HELP
Platform: WINDOWS NT (My OS is windows2k8 64bit)
Area: IWBHELP
server names: http://help.sap.com
path:
(Mymachine)\saphelp_nw70\helpdata
language:EN
default: put it check marked
Clicked on Save button
then ceated new request called SAP_Help
Then clicked on Save button
Then clicked on back button
and then Clicked on Help -> SAP Library
But still is says No Documentation Available
Please guide. I would appreciate your help
Thanks & Regards,
Prashant

Virus Call "Online help - Perform System Maintenan...

Similar Messages

Maybe you are looking for