Virus Control doesn't boot

Unfortunately, VC doesn't start at all sometimes. I use it with Apogee Enseble driver as a Core audio driver. If I forget to turn the TI on before loading Logic and project, then turn the TI on I see the window with question about using TI as a Core audio. Whatever I choose "Yes" or "No" and try to open VC nothing happens. VC doesn't boot and respond. The only way is to quit Logic and start it again.

Let me get this straight; by lead you mean the connector to wich the drive is plugged in? Because there is just one of that.
I've tried a different drive, but same problem. :(
But the drive works just fine, I can read and write to a disk, including the bootsector.

Similar Messages

  • Tecra S1 doesn't boot and hangs at (boot) splash screen

    Tecra S1 Model PT831E-107EQ-GR
    Problems started a month ago. It randomly didn't booted. After some power off/on tries it finally booted and worked properly. Because it happened more often I've bought a new hard drive (Toshiba 40 GB). I've had Acronis True Image and planned to make a disk clone to the new drive. The problem is that a notebook now doesn't boot anymore so I cannot boot it from A CD nor hard drive. It stops at "In Touch..." logo with "Press [F12] for the boot device selection menu" text and doesn't react any key. I tried to boot with no CD, no hard drive - the same. I also connected internal HD using ATA-To-USB adapter - the same. Does it mean that's not a disk problem but motherboard or other components? Is it possible to enter BIOS before boot selection screen?
    Regards,
    Jacek

    Problem solved. There was a broken PCB under the CPU socket. I've found that pressing with my finger and holding CPU while booting allowed to startup the system while releasing the finger caused system hanging and its total crash. Our local service tried to repair it but with no success. Finally two days ago we've found a working motherboard (a used one) for about 200 USD and now I'm waiting for installing it in the laptop. Th regular price for a new one (about 400 Euro) is too much, but 200 USD is OK. I do like the laptop because of its ports (LPT, RS232). It's used for programming and controlling some older devices. Newer laptops have no LPTs nor RS232s and it's not easy to find a working USB adapter because the software we're using is even from DOS times and has hard-coded IRQs for those ports.
    Anyway, I hope it'll back from the service fresh and new, and of course working ;)
    Thank you for your tips.
    Regards,
    Jacek

  • Device Control doesn't show Firewire & I can't communicate with my AJA IO

    Device Control doesn't show Firewire & I can't communicate with my AJA IO
    Posted: Aug 1, 2006 9:10 AM in response to: Patrick Sheffield
    Click to reply to this topic Reply email Email
    I've seen one other post about this and I've tried the responses to it: trash prefs, rebuild permissions, reboot the computer (let it rest and uplug), trash quicktime receipts and reinstall, uninstall AJA software and reinstall.
    The only thing I haven't tried is reinstalling my OS.
    I'm on FCP HD.
    I can capture and print to tape as an uncontrollable device. But I need to edit to tape tomorrow using the RS-422 to my digibeta deck via the AJA IO. It has worked in the recent past (last month), but in the past two weeks I can't control my deck.
    Also, I get the message "This computer does not have any serial ports required by this protocol" when I try to set up a new RS-422 AV device control setting.
    Help!

    Jerry, I can't thank you enough. I still have a few hairs left on my head thanks to you.
    I downgraded my AJA firmware and that did the trick.
    I had been on the phone with AJA last week tryingto fix this problem and we had tried everything except that. You know, the trash quicktime receipts, trash prefs, hard re-boot, etc.
    They were stumped and finally decided it was a Mac problem not an AJA problem. Ha! (Very nice folks though.)
    Your's was an answer I didn't find anywhere else in all my searching of forums.
    Thanks again!

  • Mac Os X doesn't booting on my macbook pro

    Folks,
    I've installed Windows 8.1 on my macbook pro through boot camp assistance. After installing windows 8.1, i couldn't boot my Mac OS X. I can see Mac OS X booting option in Boot Camp Control Panel on Windows.
    When i select "Mac OS X" as a default boot and restated the machine. But it doesn't boot the Mac OS X and the Windows OS booting always. I tried by pressing option key while restarting/starting the machine. Only Windows OS option is there.
    On Windows, i could see all the files that are in Mac OS X. Entire drive was there. Could you please help me how can i bring back Mac OS X as a booting option.

    You need to reinstall OS X:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • The 2012 MAC book doesn't boot

    the 2012 MAC book doesn't boot, grey screen with the apple in the middle and the progress bar when it reaches the end it shuts off

    Try SMC reset.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • IdeaCentre B320 doesn't boot into windows

    When I turn on my brand new IdeaCentre B320 all I get is a "No signal" message. Windows seems to boot in the background (the hard disk indicator LED flashes several times) but nevertheless I'm unable to switch to it.
    The IR remote control doesn't work at all (so that I can't enter the password in the menu) and the PIP button at the side doesn't work either.
    Any help would be much appreciated.

    just had the same happen to me but  had a small screen  on the botom left of the monitor shut down, i went to get a hdmi cable plug it in hdmi out and the other end into a tv  and viola in sending this from my 320e

  • Ultra 5 doesn't boot

    Hi,
    my Ultra 5 doesn't boot with my UltraSPARC IIi 440 MHz CPU (it worked until last weekend). I tried an 300 MHz CPU, and it worked. I also tried the 440 MHz CPU in my Ultra 10 -> same problem, it does not come up.
    If diag-switch? is set to false, there is no output on serial console; with diag-switch? true and diag-level max POST runs without any error, CPU is recognized as UltraSPARC IIi 440 MHz, but after POST both machines hang at probing UPA-Slot:
    Status of this POST run:        PASS
    manfacturing mode=OFF
    Time Stamp [hour:min:sec] 12:14:05  [month/date year] 05/25 2006
    Power On Selftest Completed
    Software Power ON0.0000.0000.0000 ffff.ffff.f00b.4858 0002.3333.0200.001b
    @(#) Sun Ultra 5/10 UPA/PCI 3.31 Version 0 created 2001/07/25 20:36
    Clearing E$ Tags  Done
    Clearing I/D TLBs Done
    Probing Memory Done
    MEM BASE = 0000.0000.1000.0000
    MEM SIZE = 0000.0000.0800.0000
    11-Column Mode Enabled
    MMUs ON
    Copy Done
    PC = 0000.01ff.f000.201c
    PC = 0000.0000.0000.2060
    Decompressing into Memory Done
    Size = 0000.0000.0006.eba0
    ttya initialized
    Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
    UltraSPARC-IIi 2-2 module
    Probing Memory Bank #0  64 +  64 : 128 Megabytes
    Probing Memory Bank #2  64 +  64 : 128 Megabytes
    Probing UPA Slot at 1e,0Any ideas?

    yup it was running and I was in Gnome and shut it down properly before swapping the cpu,
    now when I turn on the power switch it beeps and the drive spins up then it just sits there
    the monitor never turns on.
    I wonder if the NVram chip needs to do something to allow the cpu's to work after being swapped
    who knows I might keep an eye out for a cheap NVRAM chip and give that world but don't really want to spend much money (the cpu was 14 bucks) on a old machine.
    Luc

  • K9N Platinum - Doesn't boot with PWR2 connected

    Hi,
    I've just built a new PC with a K9N Platinum Motherboard (7250 Ver 1.0)
    I immediately discovered a problem:
    -If I connect to the power supply the PWR2 Molex (the additional power connector on the motherboard, to provide additional power to the video card) the system doesn't boot. Computer's LEDs get on for half a second, then it shuts down.
    -If I deconnect the PWR2 connector, computer boots fine.
    Bios already flashed to 1.51... no results.
    It sounds weird to me. I have an Enermax Noisetaker II 485W PSU, the CPU is an Athlon X2 65W...
    Have I got a damaged mainboard?
    Thanks for support

    Quote from: WillyTP on 15-February-07, 05:36:01
    Just tried... nothing. Lights and fans turns on for half a second, then everything dies.
    I tried to remove video card too, nothing changes :(
    sound like somethink is shorted. try take board of case and retry. it maybe dumb question, but are you connect 4pin cable in a right direction?(i know its can be plugged in one way only, but if you use little more force can be done...)

  • Replay video in Muse (some controls doesn't work)

    Hello colleagues,
    Can't understand what is happening. I put a video in the Animate and assign controls for buttons (for example, replay video from 0:00 sec). For stage and video autoplay function are disabled.
    Then I export the oam-file and insert it into the Muse with a Scroll Effect "Edge Animate" (Autoplay) to play the video at a certain point. Video starts correctly, but some controls doesn'n work, for example, "replay video". Along with this function "Toggle video play/pause" works correcly.
    Actually, I want to loop video playback but it doesn't work in the Muse (Loop function for a video).
    Can anybody recommend a solution?
    Thanks!

    Hello Joe,
    This is very interesting, but when I upload the project from Muse to my FTP-server, everything is working properly in all of browsers, all of controls and loop for the video clip. I found it by accident when I lost all hope. In other words, the problem is only when previewing the page in a browser (via the built-in local server). Maybe this is a question for the team Muse? Anyway I can send it in PM.
    Thanks for your reply,
    Alexander

  • I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.  How do I fix this?

    I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. 
    How do I fix this?

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • My mac is slow, crashes if iPhoto is opened, doesn't boot sometimes

    Hello.
    In the last time, my MacBook Pro is very slow and crashes sometimes if I open iPhoto or some other programs.
    Sometimes, there comes a black display with some thin white lines and then I have to restart the computer.
    Also, sometimes the mac doesn't boot right (you see only a grey display after the apple symbole).
    I already repaired the system with Disk Utility and erased it to install a backup of my system.
    Thank you for your help!
    Best regards....
    Here is the EtreCheck result:
    EtreCheck version: 1.9.15 (52)
    Report generated 27. September 2014 17:42:12 MESZ
    Hardware Information: ?
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.4 GHz Intel Core i7 CPU: 4 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1680 x 1050
      AMD Radeon HD 6770M - VRAM: 1024 MB
    System Software: ?
      OS X 10.9.5 (13F34) - Uptime: 0 days 0:5:31
    Disk Information: ?
      APPLE SSD TS128C disk0 : (121,33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209,7 MB
      Macintosh HD (disk0s2) / [Startup]: 120,47 GB (14,71 GB free) (Low!)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.15) Support
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.15) Support
      [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
      [not loaded] com.novatelwireless.driver.3G (3.0.15) Support
      [not loaded] com.novatelwireless.driver.3GData (3.0.15) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.15) Support
      [not loaded] com.novatelwireless.driver.NWVBE (3.0.15) Support
      [not loaded] com.novatelwireless.kext.wwan (3.0.15) Support
      [not loaded] com.option.driver.OptionHS (3.31.0) Support
      [not loaded] com.option.driver.OptionMSD (1.22.0) Support
      [not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.3) Support
    Startup Items: ?
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      HP IO: Path: /Library/StartupItems/HP IO
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sierrawireless.SWoCTool.plist Support
    User Launch Agents: ?
      [failed] com.adobe.ARM.[...].plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [failed] com.google.keystone.agent.plist Support
    User Login Items: ?
      MediaCentral Launcher
      ChaxHelperApp
      TheTube Helper
      fuspredownloader
      HP Scheduler
    Internet Plug-ins: ?
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
      Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
      CouponPrinter-FireFox: Version: Version 1.1.5
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 1.4 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.2.2 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 45 Check version
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      MediaCentral  Support
    Time Machine: ?
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 112.20 GB Disk used: 98.50 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 24
      Oldest backup: ********
      Last backup: *****
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 112.20 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          4% WindowServer
          1% fontd
          0% mtmd
          0% Activity Monitor
          0% ps
    Top Processes by Memory: ?
      242 MB Safari
      106 MB com.apple.IconServicesAgent
      102 MB mds_stores
      102 MB WindowServer
      82 MB Mail
    Virtual Memory Information: ?
      151 MB Free RAM
      1.47 GB Active RAM
      1.34 GB Inactive RAM
      1.04 GB Wired RAM
      554 MB Page-ins
      0 B Page-outs

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • System doesn't boot kernel26beyond

    Since a week or so, my system doesn't boot, unless I press <enter> and the power button a few times during the process.
    Once it has booted, everything works fine, but it is highly annoying nevertheless.
    it seems to have something to do with loading my hardware.
    Boot freezes after these log messages:
    Jul 23 12:18:49 (none) Linux version 2.6.17-beyond (root@sara) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 22 22:14:12 EST 2006
    Jul 23 12:18:49 (none) BIOS-provided physical RAM map:
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
    Jul 23 12:18:49 (none) 0MB HIGHMEM available.
    Jul 23 12:18:49 (none) 511MB LOWMEM available.
    Jul 23 12:18:49 (none) On node 0 totalpages: 130880
    Jul 23 12:18:49 (none) DMA zone: 4096 pages, LIFO batch:0
    Jul 23 12:18:49 (none) Normal zone: 126784 pages, LIFO batch:31
    Jul 23 12:18:49 (none) DMI 2.3 present.
    Jul 23 12:18:49 (none) ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5df0
    Jul 23 12:18:49 (none) ACPI: RSDT (v001 A M I  OEMRSDT  0x09000406 MSFT 0x00000097) @ 0x1ff40000
    Jul 23 12:18:49 (none) ACPI: FADT (v001 A M I  OEMFACP  0x09000406 MSFT 0x00000097) @ 0x1ff40200
    Jul 23 12:18:49 (none) ACPI: OEMB (v001 A M I  OEMBIOS  0x09000406 MSFT 0x00000097) @ 0x1ff50040
    Jul 23 12:18:49 (none) ACPI: DSDT (v001  1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
    Jul 23 12:18:49 (none) ACPI: PM-Timer IO Port: 0x408
    Jul 23 12:18:49 (none) Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
    Jul 23 12:18:49 (none) Detected 1276.987 MHz processor.
    Jul 23 12:18:49 (none) Built 1 zonelists
    Jul 23 12:18:49 (none) Kernel command line: root=/dev/hda4 ro
    Jul 23 12:18:49 (none) Found and enabled local APIC!
    Jul 23 12:18:49 (none) mapped APIC to ffffd000 (fee00000)
    Jul 23 12:18:49 (none) Enabling fast FPU save and restore... done.
    Jul 23 12:18:49 (none) Enabling unmasked SIMD FPU exception support... done.
    Jul 23 12:18:49 (none) Initializing CPU#0
    Jul 23 12:18:49 (none) Event source pit configured with caps set: 07
    Jul 23 12:18:49 (none) PID hash table entries: 2048 (order: 11, 8192 bytes)
    Jul 23 12:18:49 (none) Console: colour VGA+ 80x25
    Jul 23 12:18:49 (none) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 23 12:18:49 (none) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jul 23 12:18:49 (none) Memory: 514844k/523520k available (1921k kernel code, 8120k reserved, 725k data, 184k init, 0k highmem)
    Jul 23 12:18:49 (none) Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Jul 23 12:18:49 (none) Calibrating delay using timer specific routine.. 2197.93 BogoMIPS (lpj=1098965)
    Jul 23 12:18:49 (none) Security Framework v1.0.0 initialized
    Jul 23 12:18:49 (none) Mount-cache hash table entries: 512
    Jul 23 12:18:49 (none) CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: L1 I cache: 32K, L1 D cache: 32K
    Jul 23 12:18:49 (none) CPU: L2 cache: 2048K
    Jul 23 12:18:49 (none) CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
    Jul 23 12:18:49 (none) Intel machine check architecture supported.
    Jul 23 12:18:49 (none) Intel machine check reporting enabled on CPU#0.
    Jul 23 12:18:49 (none) Checking 'hlt' instruction... OK.
    Jul 23 12:18:49 (none) SMP alternatives: switching to UP code
    Jul 23 12:18:49 (none) Freeing SMP alternatives: 16k freed
    Jul 23 12:18:49 (none) checking if image is initramfs... it is
    Jul 23 12:18:49 (none) Freeing initrd memory: 404k freed
    Jul 23 12:18:49 (none) ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    Jul 23 12:18:49 (none) ACPI: setting ELCR to 0200 (from 0c30)
    Jul 23 12:18:49 (none) CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
    Jul 23 12:18:49 (none) SMP motherboard not detected.
    Jul 23 12:18:49 (none) lapic max_delta_ns: 1345393639
    Jul 23 12:18:49 (none) Event source pit new caps set: 01
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 06
    Jul 23 12:18:49 (none) Brought up 1 CPUs
    Jul 23 12:18:49 (none) migration_cost=0
    Jul 23 12:18:49 (none) NET: Registered protocol family 16
    Jul 23 12:18:49 (none) ACPI: bus type pci registered
    Jul 23 12:18:49 (none) PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    Jul 23 12:18:49 (none) Setting up standard PCI resources
    Jul 23 12:18:49 (none) ACPI: Subsystem revision 20060127
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.ACS_] (Node dff27900), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.AC__._INI] (Node dff27420), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI: Interpreter enabled
    Jul 23 12:18:49 (none) ACPI: Using PIC for interrupt routing
    Jul 23 12:18:49 (none) ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 23 12:18:49 (none) PCI: Probing PCI hardware (bus 00)
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.BATS] (Node dff278e0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (uteval-0158): Method execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    Jul 23 12:18:49 (none) PCI quirk: region 0500-053f claimed by ICH4 GPIO
    Jul 23 12:18:49 (none) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Jul 23 12:18:49 (none) Boot video device is 0000:01:00.0
    Jul 23 12:18:49 (none) PCI: Transparent bridge - 0000:00:1e.0
    Jul 23 12:18:49 (none) PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    Jul 23 12:18:49 (none) ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
    Jul 23 12:18:49 (none) Linux Plug and Play Support v0.97 (c) Adam Belay
    Jul 23 12:18:49 (none) pnp: PnP ACPI init
    Jul 23 12:18:49 (none) pnp: PnP ACPI: found 15 devices
    Jul 23 12:18:49 (none) SCSI subsystem initialized
    Jul 23 12:18:49 (none) PCI: Using ACPI for IRQ routing
    Jul 23 12:18:49 (none) PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x5c0-0x5cf has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x540-0x55f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x400-0x47f could not be reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x500-0x53f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x4c0-0x4cf has been reserved
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:01.0
    Jul 23 12:18:49 (none) IO window: d000-dfff
    Jul 23 12:18:49 (none) MEM window: ff800000-ff8fffff
    Jul 23 12:18:49 (none) PREFETCH window: ce900000-de9fffff
    Jul 23 12:18:49 (none) PCI: Bus 3, cardbus bridge: 0000:02:01.0
    Jul 23 12:18:49 (none) IO window: 00001000-000010ff
    Jul 23 12:18:49 (none) IO window: 00001400-000014ff
    Jul 23 12:18:49 (none) PREFETCH window: 32000000-33ffffff
    Jul 23 12:18:49 (none) MEM window: 34000000-35ffffff
    Jul 23 12:18:49 (none) PCI: Bus 7, cardbus bridge: 0000:02:01.1
    Jul 23 12:18:49 (none) IO window: 00001800-000018ff
    Jul 23 12:18:49 (none) IO window: 00001c00-00001cff
    Jul 23 12:18:49 (none) PREFETCH window: 36000000-37ffffff
    Jul 23 12:18:49 (none) MEM window: 38000000-39ffffff
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:1e.0
    Jul 23 12:18:49 (none) IO window: 1000-1fff
    Jul 23 12:18:49 (none) MEM window: ff900000-ff9fffff
    Jul 23 12:18:49 (none) PREFETCH window: dea00000-deafffff
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1e.0 (0106 -> 0107)
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:00:1e.0 to 64
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
    Jul 23 12:18:49 (none) PCI: setting IRQ 4 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.0 to 64
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    Jul 23 12:18:49 (none) PCI: setting IRQ 11 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.1 to 64
    Jul 23 12:18:49 (none) NET: Registered protocol family 2
    Jul 23 12:18:49 (none) IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jul 23 12:18:49 (none) TCP established hash table entries: 16384 (order: 5, 196608 bytes)
    Jul 23 12:18:49 (none) TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
    Jul 23 12:18:49 (none) TCP: Hash tables configured (established 16384 bind 8192)
    Jul 23 12:18:49 (none) TCP reno registered
    Jul 23 12:18:49 (none) apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    Jul 23 12:18:49 (none) apm: overridden by ACPI.
    Jul 23 12:18:49 (none) VFS: Disk quotas dquot_6.5.1
    Jul 23 12:18:49 (none) Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 23 12:18:49 (none) Installing knfsd (copyright (C) 1996 [email protected]).
    Jul 23 12:18:49 (none) Initializing Cryptographic API
    Jul 23 12:18:49 (none) io scheduler noop registered
    Jul 23 12:18:49 (none) io scheduler anticipatory registered
    Jul 23 12:18:49 (none) io scheduler deadline registered
    Jul 23 12:18:49 (none) io scheduler cfq registered (default)
    Jul 23 12:18:49 (none) vesafb: ATI Technologies Inc., P10 , 01.00 (OEM: ATI MOBILITY RADEON 9600   )
    Jul 23 12:18:49 (none) vesafb: VBE version: 2.0
    Jul 23 12:18:49 (none) vesafb: protected mode interface info at c000:5680
    Jul 23 12:18:49 (none) vesafb: pmi: set display start = c00c56ee, set palette = c00c5728
    Jul 23 12:18:49 (none) vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
    Jul 23 12:18:49 (none) vesafb: no monitor limits have been set
    Jul 23 12:18:49 (none) vesafb: scrolling: redraw
    Jul 23 12:18:49 (none) Console: switching to colour frame buffer device 128x48
    Jul 23 12:18:49 (none) vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 65536k
    Jul 23 12:18:49 (none) fb0: VESA VGA frame buffer device
    Jul 23 12:18:49 (none) ACPI: AC Adapter [AC] (on-line)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT0] (battery present)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT1] (battery absent)
    Jul 23 12:18:49 (none) ACPI: Power Button (FF) [PWRF]
    Jul 23 12:18:49 (none) ACPI: Lid Switch [LID]
    Jul 23 12:18:49 (none) ACPI: Sleep Button (CM) [SLPB]
    Jul 23 12:18:49 (none) ACPI: Power Button (CM) [PWRB]
    Jul 23 12:18:49 (none) ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    Jul 23 12:18:49 (none) ACPI: CPU0 (power states: C1[C1] C2[C2])
    Jul 23 12:18:49 (none) ACPI: Thermal Zone [THRM] (94 C)
    Jul 23 12:18:49 (none) isapnp: Scanning for PnP cards...
    Jul 23 12:18:49 (none) isapnp: No Plug & Play device found
    Jul 23 12:18:49 (none) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    Jul 23 12:18:49 (none) serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) floppy0: no floppy controllers found
    Jul 23 12:18:49 (none) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    Jul 23 12:18:49 (none) loop: loaded (max 8 devices)
    Jul 23 12:18:49 (none) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    Jul 23 12:18:49 (none) i8042.c: Detected active multiplexing controller, rev 1.1.
    Jul 23 12:18:49 (none) serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 23 12:18:49 (none) mice: PS/2 mouse device common for all mice
    Jul 23 12:18:49 (none) TCP bic registered
    Jul 23 12:18:49 (none) NET: Registered protocol family 1
    Jul 23 12:18:49 (none) NET: Registered protocol family 17
    Jul 23 12:18:49 (none) Using IPI No-Shortcut mode
    Jul 23 12:18:49 (none) Suspend2 Core.
    Jul 23 12:18:49 (none) Time: tsc clocksource has been installed.
    Jul 23 12:18:49 (none) Suspend2 Compression Driver loading.
    Jul 23 12:18:49 (none) Time: acpi_pm clocksource has been installed.
    Jul 23 12:18:49 (none) Event source pit disabled
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 08
    Jul 23 12:18:49 (none) hrtimers: Switched to high resolution mode CPU 0
    Jul 23 12:18:49 (none) Suspend2 Encryption Driver loading.
    Jul 23 12:18:49 (none) Suspend2 Swap Writer loading.
    Jul 23 12:18:49 (none) Suspend2 FileWriter loading.
    Jul 23 12:18:49 (none) ACPI wakeup devices:
    Jul 23 12:18:49 (none) SMBS MODM P0P2 CBC1 USB1 USB2 USB3
    Jul 23 12:18:49 (none) ACPI: (supports S0 S3 S4 S5)
    Jul 23 12:18:49 (none) Freeing unused kernel memory: 184k freed
    Jul 23 12:18:49 (none) input: AT Translated Set 2 keyboard as /class/input/input0
    Jul 23 12:18:49 (none) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Jul 23 12:18:49 (none) ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Jul 23 12:18:49 (none) ICH4: IDE controller at PCI slot 0000:00:1f.1
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    Jul 23 12:18:49 (none) PCI: setting IRQ 10 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    Jul 23 12:18:49 (none) ICH4: chipset revision 3
    Jul 23 12:18:49 (none) ICH4: not 100% native mode: will probe irqs later
    Jul 23 12:18:49 (none) ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    Jul 23 12:18:49 (none) ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    Jul 23 12:18:49 (none) Probing IDE interface ide0...
    Jul 23 12:18:49 (none) Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
    Jul 23 12:18:49 (none) input: SynPS/2 Synaptics TouchPad as /class/input/input1
    Then I have to press enter and the powerbutton (asus M6) a few times, and then, a line at a time a couple of messages appear, then after "udev events" has passed, boot proceeds normally.
    Jul 23 12:18:49 (none) hda: IC25N060ATMR04-0, ATA DISK drive
    Jul 23 12:18:49 (none) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Jul 23 12:18:49 (none) Probing IDE interface ide1...
    Jul 23 12:18:49 (none) hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
    Jul 23 12:18:49 (none) ide1 at 0x170-0x177,0x376 on irq 15
    Jul 23 12:18:49 (none) hda: max request size: 512KiB
    Jul 23 12:18:49 (none) hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
    Jul 23 12:18:49 (none) hda: cache flushes supported
    Jul 23 12:18:49 (none) hda: hda1 hda2 <hda5> hda3 hda4
    Jul 23 12:18:49 (none) hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Jul 23 12:18:49 (none) Uniform CD-ROM driver Revision: 3.20
    Jul 23 12:18:49 (none) kjournald starting.  Commit interval 5 seconds
    Jul 23 12:18:49 (none) EXT3-fs: mounted filesystem with ordered data mode.
    Jul 23 12:18:49 (none) usbcore: registered new driver usbfs
    Jul 23 12:18:49 (none) usbcore: registered new driver hub
    Jul 23 12:18:49 (none) Initializing USB Mass Storage driver...
    Jul 23 12:18:49 (none) usbcore: registered new driver usb-storage
    Jul 23 12:18:49 (none) USB Mass Storage support registered.
    Jul 23 12:18:49 (none) Linux agpgart interface v0.101 (c) Dave Jones
    Jul 23 12:18:49 (none) fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Jul 23 12:18:49 (none) [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
    Jul 23 12:18:49 (none) [fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
    Jul 23 12:18:49 (none) usbcore: registered new driver usblp
    Jul 23 12:18:49 (none) drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Jul 23 12:18:49 (none) Capability LSM initialized
    Jul 23 12:18:49 (none) fuse init (API version 7.6)
    Jul 23 12:18:49 (none) input: PC Speaker as /class/input/input2
    Jul 23 12:18:49 (none) NET: Registered protocol family 23
    Jul 23 12:18:49 (none) nsc-ircc, chip->init
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) pnp: Device 00:07 disabled.
    I am using mkinitcpio already: /boot/grub/menu.lst:
    # (0) Arch Linux
    title  Arch Linux
    root   (hd0,2)
    kernel /vmlinuz26beyond root=/dev/hda4 ro
    initrd /kernel26beyond.img
    my /etc/mkinitcpio.conf:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect ide filesystems"
    I tried removing scsi and sata, since my root is on an ide disk. But the problem persists.
    also recreating an image using mkinitcpio or reinstalling the kernel26beyond package using pacman doesn't help.
    Does anyone have any idea what might be wrong and how this problem might be resolved.
    It seems like a trivial issue since the systems basically works fine otherwise. However, I can't figure it out by myself, I have tried for a week.
    Any help would be greatly appreciated.

    I'm not sure if this will help you, but I suddenly was having a lot of trouble booting. My system would just freeze with a blinking cursor. I thought it had something to do with my floppy drive because if I changed the boot priority in my bios to boot from the hard disk 1st, the system would boot but would hang for a very long time in areas, and as long as 5 minutes loading uevents. I suspected this was a udev problem.
    I issued a few commands to reset udev, thinking maybe recent updates didn't take effect, which did the trick...
    # udevtrigger
    # udevcontrol reload_rules
    After that, everything is back to normal. I'm still learning about udev and I'm still fuzzy about a lot of the techy stuff.

  • My 80gb doesn't boot up this morning. apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

    my 80gb IPod doesn't boot up this morning. Worked great last nite. The apple logo keeps coming up for a few seconds then you hear it "wind down" and got blank. Tried reseting multiple time - doesn't work. Ideas?

  • After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work

    After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
    Thanks!

    Look at the previous posts on the right under the heading: "More Like This".  I appears that others are having the same problem.

  • My plus and minus volume control doesn't work.. Is there any way of turning them on or off? Or is my phone faulty?

    My plus and minus volume control doesn't seem to work.
    Can I switch the volume on?

    Hi Timjazzhair,
    Go to Settings ==> Sounds and in 'Ringer and Alert' set 'Change with Buttons' to YES.
    Woops! Meg beat me to it!

Maybe you are looking for

  • Upgrading from Labview 8.0 to Labview 8.6

    Software installed in my system (Window 2000): Testand 3.5 Labview 8.0 Cvi 8.0 Device drivers NI-488.2 VERSION 2.46 NI-VISA VERSION 3.6 NI-DAQMX VERSION 8.1.0F1 I want to install LABVIEW 8.6 instead of LABVIEW 8.0 1.Do I have to upgrade Testand,Cvi,

  • Backorders of a material by a customer

    hi By taking all these selection parameters material , customer , Plant , Material type , MRP controller , Distribution channel , Sales organization can anbody tell me what all the tables i have to use to find all the backorders of a customer for a m

  • Battery iPhone 6

    i have been using my apps in the past 35 minutes, my battery has gone from 98% - 63%. I don't have other apps running or Bluetooth, wifi or location services turned on. It's all off yet my battery drains so much. Is this normal?

  • Why are my analog singals always noisy when I use NI hardware

    I have an LVDT that outputs a 0-10VDC signal. When I use an agilent to monitor the signal it looks very clean. When I use any of my NI daq boards the signal is all over the place. What am I doing wrong? Am I scanning to fast? I am currently trying to

  • Can't connect iMessage or facetime

    Settings keeps telling me that activation of iMessage and FaceTime has failed.