Virus on my mac air please help.

Virus on my mac air please help every time i click something on a safe website or any even apple website I get redirected to stupid websites that are always random and different each time also when I'm on youtube/apple websites etc. my computer replaces letters and numbers with blue words or numbers that redirect me please help. (I'm in a different country at school so i cannot see apple store for help)

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Similar Messages

  • I can't remember my password on my Mac air, please help...

    I CAN'T REMEMBER MY PASSWORD ON MY MACBOOK AIR PLEASE HELP.............

    Resetting or changing a password:
    For Snow Leopard or earlier:  http://support.apple.com/kb/HT1274
    For Lion or later:  http://support.apple.com/kb/HT6022
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
    If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • Do I have a virus on my Mac Air because I keep getting ads for MacBooster and MacKeeper?

    Do I have a virus on my Mac Air because I keep getting ads for MacBooster and MacKeeper?

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • HT4991 How to I get internet explorer on my mac. Please help?

    I have just purchased my Mac Air to use in a business that uses microsft small business server.
    For some reason, I cannot use the sharepoint without internet explorer.
    Does anyone know how I can load this onto the Mac Air please?

    There is no IE for the Mac. The Mac version of IE ceased to exist at least 7 or 8 years ago. You can try using FireFox instead of Safari or you can enable the Develop menu in Safari by checking that option in the Advanced panel of Safari's preferences. You can then change the User Agent to IE 7, 8, or 9 and see if that helps.

  • My iPhoto won't open. It says "Your photo library is either in use by another application or no longer readable." Please tell me I haven't lost all my pics?! I do not have them backed up. I have tried restarting my mac. Please Help!

    My iPhoto won't open. It says "Your photo library is either in use by another application or no longer readable." Please tell me I haven't lost all my pics?! I do not have them backed up. I have tried restarting my mac. Please Help!

    What haven't you backed them up? You should always have a back up of any important material on your Mac. Make one now:
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    What version of iPhoto do you have?

  • I have Windows Vista and my iTunes is v 10.5, I have an iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need to upgrade my phones on a Mac? Please help!

                        I have Windows Vista and my iTunes is v10.5, I have and iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need t upgrade my phones on a Mac? Please help it would be greatly appreciated.

    Your expectations are not based in reality.
    Your G4 will not run iCloud. There will be no upgrade from Mobile Me to iCloud for you with that machine unless you do it manually, and only mail will work without further expenditure.

  • I destroyed mac while installing ubuntu.  Id like to get mac back, please help?

    I was curious about linux so i installed ubuntu and accidentally destroyed my mac partition.  Id like to get mac back, please help!!! I have the snow leopard install dvd but it causes kernel panics.  And i obviously cant download lion from the app store because i am using ubuntu.
    I am using a mbp 8,1 early 2011.  Please help!!

    I read your post as indicating you wiped the OS X partition from the disk.
    If that is the case then, given  the date of the machine I don't think you have network recovery,  you should check to see if the Recovery partition is still on the disk (depends on how you wiped out the OS X stuff when you installed Ubuntu) by doing as Thomas said hold command R while starting up.
    If the recovery partition is still there you're home free, just follow the screen prompts. If it is not there then the only recourse you have is to get it to boot off the original SL install disks. At what point during the boot procedure with the SL disks does the machine panic? And as was asked above, these are the SL disks that shipped with your machine?
    If I misread your post then follow the advice of the previous posters.
    regards

  • How use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

    how use set up with office 2011 for mac as I did keep tried put download but it's always 'update' download. I want get start set up new office 2011 for mac? please help me

    You must be using an update CD.  You need the software that has the full version first - install that, then you can use the update one if needed. I know, cuz I made the same mistake - lol

  • I'd like to know how to change my profile picture that appears on mail threads on my mac.  please help.

    I'd like to know how to change my profile picture that appears on mail threads on my mac.  please help.

    There may be other methods, but below is how I change my email photo.
    Here is how to change your Mac Mail email photo in Mountain Lion:
    Open the App called "Contacts". Type your name in the search field. Your contact info and photo should appear. Click on your photo. You now have some photo options. I use the "Recents" tab, and simply drag photo files from Finder into that window in Contacts. Drag and drop.
    If you have trouble finding yourself in "Contacts" you can also get there by doing this:
    Open one of your sent messages. Double click your photo in that message. This opens another window with your photo in it. Double-click that photo. This should open your contact information in the Contacts App.
    Hope this helps.
    -Craig

  • I intended to install windows on my macbook, but I removed Mac os X wrongly! Now I don't know how to install Mac again please help me.

    I intended to install windows on my macbook, but I removed Mac os X wrongly! Now I don't know how to install Mac again please help me.

    I still don't know which version of OSX you have but assuming it's 10.7 or 10.8 .....
    You need to press command-R (at the sound of the chime) to get into recovery, try that, if it does not work try command-option-R for Internet Recovery.

  • Formatted Harddrive and carnt get os x on it Macbook air PLEASE HELP new to mac!!

    I have purchsed a second hand Macbook Air think its 2008/2009 model with Windows 8 that was on it no other operating system on it!!!
    However i have formatted the harddrive and tried to get os x lion installed on it having no luck at all need help! i have come arcross a circle with a line threw it.
    Please help me get os x installed on it!!!
    Thanks
    Adam

    Does this Mac meet v10.7 Lion requirements >  System requirements for OS X Lion
    How To Perform a Clean Install of OS X Lion on Your Mac

  • How to uninstall antivirus program on Mac Air please

    Hi I have Mac Air OS X 10.9.4 and wanted to download McAfee antivirus program which requires removing my now defunct Sophos Antivirus.  I have removed all Sophos files (per my computer) into the trash but still am told McAfee cannot download because there is still an old incompatible antivirus program.  Please help.  I am now unprotected.  There is a Sophos "logo" in the tool bar but I don't know how to remove it...and it will not function when opened.  Thanks much!

    From Removal tools for Sophos Anti-Virus for Mac:
    In some situations you may be unable to run the built-in Sophos Anti-Virus for Mac (SAV for Mac) uninstaller.  This article provides a standalone tool to remove the installation of Sophos Anti-Virus for Mac
    Common reasons for needing this tool are:
    If the product has been deleted (e.g., dragged to the Trash) rather than correctly uninstalled.
    Where the uninstaller is unable to run due to a corrupted receipt file.
    Download, expand, and run the applicable uninstaller for the Sophos product you installed.
    Do not install McAfee.

  • I have created a folder that I can now Save to and view in Photoshop (CS4) but cannot find in spotlight or any other way on my mac. PLEASE HELP!!

    I use Photoshop CS4, I do not think this problem is related to PS... I am not exactly sure what happened. I created a folder on desktop, think I changed name of it. Now it is not on desktop. I know the exact name of the folder and have tried doing a spotlight search and cannot locate it AS WELL as searching for a file by name EXACT as name is. However if I go into Photoshop I can open or "save as" and open the folder and save as a "recent location" and the folder and its contents are found no problem... however cannot see the pathway to know where the folder is located on my mac.. PLEASE HELP!!! Been using photoshop and my mac for MANY years and NEVER had a problem like this... I have a photo client awaiting their pictures to be burned on a cd and mailed to them!!
    THANK YOU!!
    Laurie

    Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

  • IPod is not recognised on either Windows nor on Mac. Please help!

    I have an old iPod (3d generation I think) which worked ok up to the point when I got a new Macbook with a new iPod (60G, black). Since then the old iPod doesn't want to be recognized anywhere, on Windows or Mac. When I switch it on, all I see is the apple on the screen, nothing else works. I tried all the solutions that are on the support site, but none of them work. Could anyone please help me with this problem?

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart

  • Storage and memory problems on a new mac. PLEASE HELP

    I had a macbook pro 5 years ago and backed everything up to my time machine. i just bought a new mac book pro yesterday. I only wanted to transfer my music and photo files over, and i somehow managed to do that but i think i made a mistake somewhere because now my storage memory is listed at over 400 gb used which i know is impossible. ive saved one document onmy new computer and the entire storage on the time machine is only 173 gb. I have over 300 gb listed as other on the new computer- at one point it was purple and categorized as backup but now it says other- can anyone help me?
    my computer is running super slow now because of it and i just spent over 2000 dollars on this yesterday and I cant find anything in apple support to help me. i already tried looking through all the files and used the omni disk sweeper.
    PLEASE HELP ME!
    i have the mac os x 10.8.2

    I tried running the uninstall blackberry software and it said it coudnt find anything to uninstall and self control doesnt have any uninstalll programs- do you know how else i can delete them or what else i should do? i ran the system again and have pasted the results below in case that would help- i dont really understand it - THANK YOU VERY MUCH for your time and help-i really appreciate it- i just want this fixed
    Hardware Information:
              MacBook Pro - model: MacBookPro9,1
              1 2.3 GHz Intel Core i7 CPU: 4 cores
              4 GB RAM
    System Software:
              OS X 10.8.2 (12C60) - Uptime: 1 day 0:53
    Disk Information:
              APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (223.43 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5970H disk4 : (690.9 MB)
                        disk4s1 (disk4s1) <not mounted>: 52.2 MB
                        disk4s2 (disk4s2) <not mounted>: 39.4 MB
                        disk4s3 (disk4s3) <not mounted>: 42.8 MB
                        disk4s4 (disk4s4) <not mounted>: 38.8 MB
                        disk4s5 (disk4s5) <not mounted>: 58.1 MB
                        disk4s6 (disk4s6) <not mounted>: 40.9 MB
                        disk4s7 (disk4s7) <not mounted>: 43.1 MB
                        disk4s8 (disk4s8) <not mounted>: 34.1 MB
                        disk4s9 (disk4s9) <not mounted>: 36.3 MB
                        disk4s10 (disk4s10) <not mounted>: 52.7 MB
                        disk4s11 (disk4s11) <not mounted>: 35.8 MB
                        disk4s12 (disk4s12) <not mounted>: 50.3 MB
                        disk4s13 (disk4s13) <not mounted>: 42.4 MB
                        disk4s14 (disk4s14) <not mounted>: 43.3 MB
                        disk4s15 (disk4s15) <not mounted>: 38.9 MB
                        disk4s16 (disk4s16) <not mounted>: 41.9 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
                     [failed] com.apple.afpstat.plist
                     [failed] com.apple.coreservices.appleid.authentication.plist
                     [failed] com.apple.KerberosHelper.LKDCHelper.plist
                     [failed] com.apple.mrt.uiagent.plist
                     [failed] com.apple.pbs.plist
                     [failed] com.apple.rcd.plist
    Launch Daemons:
                     [loaded] com.adobe.fpsaud.plist
                     [loaded] com.microsoft.office.licensing.helper.plist
                     [loaded] com.rim.BBDaemon.plist
                 [not loaded] org.eyebeam.SelfControl.plist
    Launch Agents:
                     [loaded] com.rim.BBLaunchAgent.plist
    User Launch Agents:
                     [loaded] com.spotify.webhelper.plist
    User Login Items:
              iTunesHelper
    3rd Party Preference Panes:
              Flash Player
              Flip4Mac WMV
    Internet Plug-ins:
              DivXBrowserPlugin.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              OfficeLiveBrowserPlugin.plugin
              Photo Center Plugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Top Processes:
              16.3  %          WebProcess
              9.0   %          WindowServer
              3.6   %          coreaudiod
              1.1   %          EtreCheck
              1.0   %          iTunes
              0.9   %          PluginProcess
              0.4   %          BBLaunchAgent
              0.2   %          Safari
              0.2   %          NotificationCenter
              0.1   %          fontd

Maybe you are looking for

  • Help with Mac to PC

    Hello, I want to format my Macbook which (I assume) means I need to get everything off it and on to another computer temporarily. (If I don't have to then that would be awesome, can someone tell me how?) Unfortunately for me, the only computer availa

  • I can't find my photos i just edited in iPhoto

    I AM SOOO FRUSRATED ...I AM AVID APPLE FOR OVER 20 YEARS ..THIS NEW OS IS COMPLETELY WACKED ..I JUST IMPORTED PHOTOS FROM IPHONE THEN EDITED THEM , ADDED TO AN ALBUM .....NOW IMMEDIATELY AFTER , AS I TRY TO PUT IN A NEW FOLDER ( NOT DONE )...I CAN'T

  • Customization of Connection Drop Down/View in SQL Developer

    I know this may not be that import feature that i think SQL Developer should have but will be very helpful. In my scenario there are many databases and schemas exists in Development/Staging/Production environments, there is a possibility when selecti

  • Protect your nano ideas and links NO COMPLAINTS PLS

    DON'T TURN THIS INTO A SCRATCH COMPLAINT THREAD!!!! OK. Apple has said the material on the nano is the same as their 4G iPod's. I'm good with that. I have a 4G iPod and I have a protector on the screen. Put it on the first day I owned it. My 6gig Min

  • Quick pop up error message?

    Every few hours on my Macbook Pro (Lion current version) theres a smallpop up error message thats gone so fast I cant even read it. All I can see is the yellow exclamation point in the yellow triangle for a split second and it disappears. It is quite