Virus related to Unzipping files
I have a weird problem:
Zipped files will not decompress with the BOMArchiveHelper (double clinking on them) but when I use Stuffit expander 2009, the files decompress into some PBeM game called "Big Bang 4-In-A-Row" From Freeverse Software, by Ian Lynch Smith and Colin Lynch Smith. I have run Norton Antivirus and it does not recognize any problems.
I would appreciate any help or suggestions.
Note that many viruses are intended for PC users and will have a .exe extension because they are programs to run on the PC. Still, a few viruses are in the form of macros which are programs that are intended to run when you open a program capable of running the macros, often Word or Excel. I don't know to what extent these can affect a mac, but I have the preferences set in office to not run macros, and I never run any sent to me unless I 100% trust the sender to know what is being sent (i.e., the sender is a colleague who wrote the macro).
Sig tells you to get rid of Norton, but I'd like to see a bit of expansion on this. Norton used to produce a suite of tools for doing spring cleaning and repair on Macs. After the release of OSX these tools were not well designed, Norton got very bad rap and abandoned the Mac platform altogether for the tools. This is what I normally associate with the immediate "Get rid of it!" response to the mere mention of the word "Norton" on the OSX forums. I'm curious, does the same apply to Norton Antivirus vs. Norton Tools? Note, I am not trying to open a discussion of whether or not one needs an antivirus program on a Mac -- some places require all computers run some form of Antivirus software. I'm just wondering if you do have NAV running if it is "dangerous" the way Norton Tools was?
Message was edited by: Limnos
Similar Messages
-
My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Auto unzip files under downloads folder
- any downloaded files will go to "downloads folder" on the dock.
- any "zip" type of files will unzip(decompress) on it's own under "downloads folder" right after the download action is completed.
my question:
1. is it safe for the zip file to unzip by itself? will I somehow get virus this way?
(if there are any virus in the zip file).
2. is there any way to turn this auto unzip feature off?
(note that: it only unzips on it's own under "downloads folder" on the dock right after download is completed.)1. This shouldn't be a problem, but you can never be too safe.
2. If you are downloading your files using Safari, do the following:
Safari > Preferences... > General (Tab) > Open "safe" files after downloading (Uncheck) -
Unzipping Files in the wrong folder
Hi
I am trying to unzip files. It works fine except that it unzips the files at the root. So i have tried specifying the path for making the directory (in which the unzipped files are stored). But that doesnt seem to work. Now i am unable to find the unzipped files. CAN ANYONE HELP PLEASE
public static void unzipFile(String zFile)
Enumeration entries;
ZipFile zipFile;
try {
zipFile = new ZipFile(zFile);
File file = new File(zipFile.getName());
String fname = file.getName();
String substr1 = fname.substring(0, fname.indexOf("."));
String filepath = "/data/psawant/temp";
File dir = new File(filepath, substr1);
try {
dir.mkdir();
catch (Exception fe)
System.err.println("Unhandled exception:");
fe.printStackTrace();
return;
entries = zipFile.entries();
while(entries.hasMoreElements()) {
ZipEntry entry = (ZipEntry)entries.nextElement();
if(entry.isDirectory())
// Assume directories are stored parents first then children.
System.err.println("Extracting directory: " + entry.getName());
(new File(entry.getName())).mkdir();
continue;
} //end of if
System.err.println("Extracting file: " + entry.getName());
copyInputStream(zipFile.getInputStream(entry),
new BufferedOutputStream(new FileOutputStream(entry.getName())));
} //end of while
zipFile.close();
} catch (IOException ioe) { }
} //end of unzip function
public static final void copyInputStream(InputStream in, OutputStream out)
throws IOException
byte[] buffer = new byte[1024];
int len;
while((len = in.read(buffer)) >= 0)
out.write(buffer, 0, len);
in.close();
out.close();
Any help is apprciated
ThanxSorry I got it this time. I had overlooked the new File. I added that & it works fine but there seems to be some problem
If the folder has another folder inside . it doesnt show that one. or rather just unzips one folder & no folders inside it. But i guess i can check for that
Thanx for u r help
Have a nice day -
Hi,
I have a requirement to retrieve a zip file from the FTP Server, unzip it to the SAP Server and process the unzipped files. Retrieving the data from the FTP server should work via FTP commands which can be executed from within an ABAP program. However, the problem is unzipping these files via ABAP and put them on the server as well. 1. How to do this from within an ABAP Program? (unix commands?)
2. Can I unzip these files with or without using the folder structure? (additional parameter for unix command?)
Kind regards,
Micky.REPORT ZTESTUNIX line-size 400
no standard page heading.
selection-screen begin of block ucmd with frame title text-001.
parameters: unixcom like rlgrap-filename. " ...SAP Interface file
selection-screen end of block ucmd.
data: begin of tabl occurs 500,
line(400),
end of tabl.
data: lines type i.
start-of-selection.
refresh tabl.
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
describe table tabl lines lines.
loop at tabl.
write:/01 tabl-line.
endloop.
skip 2.
if lines = 0.
write:/ 'NO Occurances were found'.
else.
write:/ 'Command was successfully executed' color col_total.
write:/ 'Number of entries in Search' color col_total,
lines color 6.
endif.
end-of-selection.
while running give the command as
<b>unzip test.zip -x dir</b>
then it will unzip test.zip file to dir called dir.
you can specify the filepath instead of file...
regards
vijay -
i have a license for all adobe files but recently i had a virus and all my files were deleted.Now when i want to have them back with my redemption code it says that i cannot use it anymore.But my license is not expired.How do i get my files back??
Your redemption code was used to acquire an activation code. The activation code is what you need to use when you want to reinstall/enable the software again. Check your Adobe account online to see if the number(s) can be found there.
-
Virus Detected (403), Your file could not be uploaded because it contains a virus.
From a Windows 7 Ultimate PC I tried to upload a PDF portfolio containing 35 PDFs. The upload failed with the message "Virus Detected (403), Your file could not be uploaded because it contains a virus."
It is highly unlikely that this PDF portfolio or its 35 PDFs contain a virus. It passed a scan by Microsoft Security Essentials. Any suggestions?
BillHello,
I've got the same 403 error when I want to upload a ebook (purchased on peachpit, see this url for ebook), but when I scan it (windows 8 / avast) no virus found.
Olivier -
Unable to unzip files , unable to move apps into the app foldercant update
I cannot unzip files. Also if i try to install a new app by dragging it to the applications folder it says "that files already exists".
also if i try to update with software update it gives an error. i tried running verify disk permissions and repair disk permissions but this did nothing please help i am scared cuz my last time machine was along time ago.Not to worry.
A few clarification questions first.
What exactly does the dialog say when you try to drag a new app to the applications folder? Is it something like, "an older version of this already exists in this location, do you want to replace it with the version you are moving?"
And, what application are you attempting to use to unzip files? -
I am trying to unzip a file using java.util.zip. It is throwing a ZipException in the first line where I instantiate ZipFile object.
ZipFile oFile = new ZipFile("/myzip.zip");java.util.jar is not working either. It fails right here:
JarFile oFile = new JarFile("/myzip.zip");Here is the exception thrown in the above cases:
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(Unknown Source)
at java.util.jar.JarFile.<init>(Unknown Source)
at java.util.jar.JarFile.<init>(Unknown Source)
at ReadZipFile.main(ReadZipFile.java:21)
An interesting observation:
I am able to extract the contents of the zip from the command-line using jar utility.
jar xvf myzip.zipI am stumped! I think jar utility internally uses the same classes for unzipping files. How come it is working with jar utility whereas it is not working from Java program? Also, the myzip.zip appears to be a valid archive - I am able to open it with winzip.
Any pointers will be appreciated.
Thanks in advance,
GaneshI think the above reply is correct but didn't explain why you would be getting a file not found. Unless you have your zip file at the root of your harddrive the slash in the filename is improper. Without the slash your code will assume your current working directory and look for the file there.
By putting that forward slash in there you are telling the code to look at the root of the filestructure and NOT at the current working directory. -
Unzip file from froms then load
i have form (basically called loader) which read text file and then load it in data base.
Now,there is a user requirement that if text file is in zip format then he can unzip file using form.
Any idea how to do this can some unzip software used at back end.
I mean any idea any suggestion is required.
Forms 6i i am using.The zip.exe and unzip.exe are shipped with Oracle products, they are found under %ORACLE_HOME%/bin
just type zip or unzip in a command line session and you'll get all the switches and details.
Judging from your first post I understand you are running in C/S mode, if not you need to use CLIENT_HOST from webutil instead of HOST. It's the same concept.
As for HOST built-in example, I told you, there are very nice and detailed examples in the online help of Forms builder.
Open Forms builder and either press Ctrl + H or click on the big blue question mark, or open help menu and click on "Online Help".
Tony
Message was edited by:
Tony Garabedian -
Unzip files from a folder which is updating regularly using multithreading
Hi All,
I have acode which unzip all the files from a folder .This code picks up all the zipped files at a time and then unzip it and write them to another folder but now my requirement is changed ,suppose the source folder where all the zipped files are present is refreshed or updated with new zipped files regularly then how can I implement in my code multithreading to get several files by threads and send it for unzipping.
Please suggest with some example or edit my code.
package com.myprojcet;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.util.zip.ZipEntry;
import java.util.zip.ZipInputStream;
public class Main {
* Extracts a zip file
public void extractZipFile() {
try {
String zipFileName = "C:\\soft\\test"; //Source folder for zipped files
//Create input and output streams
File SourceDir = new File(zipFileName);
File[] zipFiles = SourceDir.listFiles();
ZipInputStream inStream = null;
OutputStream outStream = null;
ZipEntry entry;
byte[] buffer = new byte[1024];
int nrBytesRead;
//Get next zip entry and start reading data
for(int i=0; i < zipFiles.length; i++) {
inStream= new ZipInputStream(new FileInputStream(zipFiles));
while((entry = inStream.getNextEntry()) != null) {
outStream=new FileOutputStream("C:\\soft\\test2\\"+entry.toString()); //destination folder for unzipped file
while ((nrBytesRead = inStream.read(buffer)) > 0) {
outStream.write(buffer, 0, nrBytesRead);
//Finish off by closing the streams
outStream.close();
inStream.close();
} catch (IOException ex) {
ex.printStackTrace();
* @param args the command line arguments
public static void main(String[] args) {
new Main().extractZipFile();
Thanks
Sumit
Edited by: user8687839 on Feb 27, 2012 11:00 PMBut my question is that if in a source folder we have several files which are in zipped format and the folder is getting updated every min (say) with new zipped files (which are dumped from some outside environment).I need to unzip all the files present in the folder ,if new one comes there then also check for the new zipped file and unzip it.You don't need to keep re-stating that.
I had written a code for unzipping a file from a folder (thinking the folder is not updated everytime).Or that.
Now I am thinking of using threads because if I create suppose 5 threads and every threads poll the source folder and pick up a zip file ,send it for unzipping it and again poll the source folder for any new entries?Or that.
If using the threads here hits performace then what should I use?Err, what you presently have?
Provide me any sample code or link that would be more useful.You've already written it. -
Unzip files from FTP using ABAP
Hi All,
I have the a requirement to unzip certain files from ftp and transfer the extracted files to another directory in ftp.
Searched (Re: Unzip file;) in SDN but didnt find the perfect solution
Appreciate the help.
Regards
SivaYou can use IndexOf function
see this example
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Will not print files from mobile phone says it **may have** a virus- and deletes the file
My HP photosmart premium with wireless ePrint, will not print files from mobile phone says it **may have** a virus- and deletes the file?!? My Fiance has the same phone, and I used it. It completed the file??? If I text message and E-mail address, my cell phone will come up as and E-mail address... has anyone else had this issue? Is it because I texted the the file? It didn't seem to be and issue on any of the other mobile phones used.... I am out of answers.... I tried to E-mail as well...
Thanks in advanceI have nearly the same problem, the printer discards my print job even when i have entered my email address as authorised senders.
Details from my other post:
I sent 2 emails to the printer:
- one is a 3 lines of text and numbers in a GIF file sent as an attachment
- another is a jpg circuit diagram paste in a word doc sent as an attachment
both are classified as spam and refused to print. i have no email coming back saying it failed (even i have checked "Email Job Status" in ePrint Settings.
So what will this HP printer print?
How can I switch this useless spam filter off?
I have get this filter off! I need this email printing to work reliably, that is a major reason I bought this printer
Any suggestions are welcomed...
HP's slogan on the box:
"Now you can print from virtually anywhere" (but get discarded every single time!) -
Hi,
I am having query related to .tpz files.
I am having XI Development server on AIX. My XI Prd server will be on windows NT .
<b>Can i transport .tpz file from development server to production server as both the servers are on different platforms.</b>
Regards
PrabhatI think it should not be a problem....
One of the reasoning is that SAP standard content for XI also comes as tpz files...
best way to know is to just try it out...
here is the link from sap help on transporting objects..
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Thanks,
Renjith -
Execute Process Task error-Unzip Files
Dear All,
I have a SSIS package, that downloads a Zip file from FTP Server and extract and load that information in Sql Server Table. In my case every time I have only one file in FTP Server. There is no possible to get multiple files from FTP Server.
While at the time of executing SSIS package getting error at Execute Process Task(Unzip Files) i.e
Error Description :In Executing "F:\7z\7z.exe" " x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles\" at "", The process exit code was "2" while the expected was "0".
This error message getting while unzip my file.
Can some one help on this issue.
Regards,
Praveen C.
Regards, PraveenHi Praveen,
After testing the issue in my environment, I find the issue is caused by the code in Arguments is incorrect.
To fix this issue, please refer to the code below:
x F:\ZipFiles\Sales_010815.zip -oF:\ZipFiles
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
OK how do I put at the bottom of Lion Finder window the path and size of a file.
I miss that.
-
Sending mail to Junk crashes Mail
When a piece of junk mail makes it to my inbox and I select it and press "Junk", Mail.app freezes and I have to restart. It does this consistently. With my internet connection off, I have tried to reset Junk in preferences, but the problem will not g
-
My Mac Pro all of a sudden would not turn on. It beebs 3 times, pauses, and then does it again. I don't think I have downloaded anything recently and I don't know what to do!
-
Net value in conidtions tab of PO
Hi guys, which table can i get the Net value in conditions tab of PO? Thanks!
-
Hi, I know that the shortcut key for back in finder is cmd + [. The problem is that my keyboard doesn'y have a [ printed anywhere and the only way I can get that character is to press alt + 8. I tried cmd + alt + 8 several times but it doesn't work t