Virus Scan profile Activation and Configuration

Hi Guys,
We need to activate the Virus Scan profile, so that the team could upload the document in SCM System with in SNC Page.
Its AIX 64 bit, DB2 9.1 SCM 7.01
I have seen the document of this and found i need to start with the group creation: Done
Then, We need to create a RFC type T with Registered program:
Q.1 I need to know what would be the external program in this case.
Q.2 I have downloaded Virus Scanner and connector for ClamAV
Q.3 Do i need to install the product in step 2 in the same server AIX 64 or in other machine and what would be the Register program.
Q.4 What is the Role of VSI and SAP VSI 7.01 is available for Windows Server on IA32 32bit only andhow would we install this , when and where?
Thanks
Rajesh
Edited by: Rajesh Sharma on May 28, 2010 2:09 PM

Hi Joerg,
I found some soluation also. They shared a one document. i did the changes but still same problem.
Scan Profile setup
Transaction SM34 -> VSCAN_PROFILE_VC
Transaction /IWFND/VIRUS_SCAN
Set the Zprofile to the default
The Table /IWFND/C_CONFIG should have the entry
Please suggest . i have internal system and we dont have virus server. I am confused.
Regards,
Dharmesh

Similar Messages

Virus scan profile activation in ODATA

Hi Experts,
I am facing an issue while uploading Image(*Base64 format)
into SAP through Netweaver Odata Gateway services. The issue is that the
content of the Image is supposed to come in a field that has datatype Xstring
but when we include a field with data type Xstring the framework starts giving
an error no virus scan profile is active . We did try various combinations of
Standard Virus Profile maintained , but no resolution came out of it. Now we
have created a new profile in customer namespace but now it gives an error
Incorrect Configuration for Profile <Profile Name>. We need help in
trying to figure out what is correct configuration that is to be maintained to
fix this issue.
There is an alternative that we deactivate the Virus Scan
profile through transaction /IWFND/VIRUS_SCAN and then we are able to post the
images , but this doesn’t look like an ideal solution as it would involve
transporting Virus scan profile to Production and quality and then deactivating
them over there manually.
I am getting error on "Recursive occurrence of virus scan profile in the sequence"
Please suggest.
Regards,
Dharmesh Sharma

Hi Joerg,
I found some soluation also. They shared a one document. i did the changes but still same problem.
Scan Profile setup
Transaction SM34 -> VSCAN_PROFILE_VC
Transaction /IWFND/VIRUS_SCAN
Set the Zprofile to the default
The Table /IWFND/C_CONFIG should have the entry
Please suggest . i have internal system and we dont have virus server. I am confused.
Regards,
Dharmesh

Virus Scan profile activated - implications?

Hello.
we have a custom program that makes IDOCS into PDF's and then emails them.
if the Virus Scan profile /SCMS/KPRO_CREATE is not activated it fails saying that it isnt activated.
There is Note 1382313 that states not to activate it, only if you need it activate it.
So we do need it and activated it now but what else is now scanned as well?
And how come its needed when we create documents? So far I have only found it to be needed for incoming objects?
Thanks for thinking!
Andi

Though the profile is active, you need a virus scanner.
you need External Virus Scanner to be setup in the VSCAN--> Servers.
Few Virus Scanners are McAfee, Avira, and http://www.bowbridge.de/index.php?id=31&L=1
BowBridge.
Once the setup is done, use VSCANPROFILE---> Activate it and use VSCANTEST to test sample antivirus.
After the activation only the docuemnts which are using the profile are scanned, the idea is when you upload a documet to SAP then it is scanned.
Thanks
SM

Virus Scan profile Activation

Hi Guys,
We need to activate the Virus Scan profile, so that the team could upload the document in SCM System with in SNC Page.
Its AIX 64 bit, DB2 9.1 SCM 7.0..
I have seen the document of this and found i need to start with the group creation: Done
Then, We need to create a RFC type T with Registered program:
Q.1 I need to know what would be the exteranl program in this case.
Q.2 There is no Antivirus in AIX 64 bit, so do i need to know where Antivirus Scan engine is ruuning.
If some one has any document and if it is posted somehere in sdn which descibes sterp by step how to proceed with this, it would be higly appreciated..
Thanks
Rajesh

Hi Joerg,
I found some soluation also. They shared a one document. i did the changes but still same problem.
Scan Profile setup
Transaction SM34 -> VSCAN_PROFILE_VC
Transaction /IWFND/VIRUS_SCAN
Set the Zprofile to the default
The Table /IWFND/C_CONFIG should have the entry
Please suggest . i have internal system and we dont have virus server. I am confused.
Regards,
Dharmesh

Virus scan profile /SCET/GUI_UPLOAD is not active

Hello,
i'm using the submit statement to execute a program(download data as xml file) in background.
When i do that, I receive : Virus scan profile /SCET/GUI_UPLOAD is not active
in SPRO, i have the following:
when i tick on columns Active and Default profile, i receive:
Recursive occurrence of virus scan profile /SCET/GUI_UPLOAD in the sequence /SCET/GUI_UPLOAD
Details:
When i start extraction for FI data via abap Report in Background, i receive that error.
The abap report do a download of data from several tables to the XML file.
I tried the download to local PC and To Application server, but i receive in the both situation the same error...
Any idea to solve this issue?
thanks.

any idea.....

Recursive occurance of Virus scan profile /scet/gui_upload in the sequence

Hi Experts,
I am Basis Consultant.I am facing following error
Recursive occurance of Virus scan profile /scet/gui_upload in the sequence /scer/gui_upload.
I mainatined the gui_upload in virusscan settings.
can you please help me resolving the error.
Thanks in advacne for helping me
Manohar

Recursive occurance of Virus scan profile /scet/gui_upload in the sequence /scer/gui_upload.
-> what for files do you upload? Compressed files like zip or normal files?
I mainatined the gui_upload in virusscan settings.
-> you mean you configered and exclude directory in your virus scan settings? Which vendor is it?
Some more details would be nice to understand your problem.
Edited by: Denis Heitbrock on Jan 27, 2011 4:48 PM

CG36 - No virus scan profile is selected as the "default profile"

When running transaction CG36 - Import Reports, I'm getting this message in the job log:
"No virus scan profile is selected as the "default profile" VSCAN 034 I"
Do I have to set up a default profile for virus scan? I have never seen this error until recent upgrade. Is there a way to by pass this virus scan if we choose not to activate it?
Thanks!

I encountered the same problem during the CG36 transaction.
"Error during virus scan in file "...\usr\sap\.....\xixoxoxioxo.pdf" with Message class "CM_REPORT_IMP_EXP" 010 E
Job cancelled after system exception ERROR_MESSAGE.
This may be due to BASIS security level virus scan checks on the files being imported to the application server. Is BASIS assistance required on this or any workaround to bypass?
Thank you.

Virus scan server error: "No virus scan profile is selected as the "default"

Hi Team,
I try to upload Fiori Code into SAP Netweaver Gateway server .
i can able to share Project.
But when i try to submit code
then at the end of Process i got error message.
Virus scan server error: "No virus scan profile is selected as the "default"
Please Guide me
Regards
Pankaj Kamble
Tags edited by: Michael Appleby

Hi Abraham,
Thank you very much. My problem resolved.
I have one Query Please guide me.
whenever we run Server URL from The Browser, first we must need run "chrome.exe --args --disable-web-security" command on CMD. on located directory the Chrome has installed.
to disable web security.
if I did not run that command on CMD, then Fiori Apps not worked.
Why it's compulsory to disable web security.
Regards,
Pankaj Kamble

Forum activity (answers and replies) doesnt get reflected in profile activity and points not counted

I see that some times the replies as well as answers marked doesnt get reflected in the profile activity.
Eg: One of my replies is marked as an answer (https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0e47a7fa-c418-43ed-a12e-6cf53de39bf9/cannot-access-instance?forum=sqlsecurity)
. This answer doesnt show up in profile activity and points didnt get added. However, there are two votes for my replies in the same thread which are seen in the profile activity. The funny thing is there is another response which is also marked as answer
for this thread and it shows up in that persons profile.
I am noticing similar behavior with replies as well. Ie even if you reply to a post it doesnt show in activity and that question will not get updated as a recent post. If you see the last reply would be some one else who responded before me. If you open
the thread then you will see my post as well. If somebody responds to that thread then it will come up again as a recent thread. Still it wont get reflected in profile activity.
This has happened many times, though its not really an issue its little sad that marked answers are not getting reflected in profile activity and points added up.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Hi,
The forums have been having problems for the past month or so. There's another thread here reporting the same sort of issue that you're experiencing:
https://social.technet.microsoft.com/Forums/en-US/3a645416-f2cc-49bc-bd97-701f06377efb/not-getting-points-for-the-marked-answers?forum=reportabug
The best way to report this issue to the forums team is by sending an email to fissues (at) microsoft [dot] com. They're definitely aware that there are multiple problems going on, but it certainly can't hurt to send in another notice.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Virus Scanning in iSupplier and iSoucing Module

There are a number of pages in iSupplier and iSoucing Module where supplier a upload documents. For Security purposes system should check Virus Scanning.
(As iRec Module have this functionality).
Is any one idea about this. How to enable Virus Scanning during document Upload for iSupplier and iSoucing Module .
Thanks, Avaneesh

You can use virus scanning but you need to exclude extensions and folders of lync as exist in blow link
http://technet.microsoft.com/en-us/library/dn440138.aspx
Please remember, if you see a post that helped you please click (Vote As Helpful) and if it answered your question, please click (Mark As Answer).

I get prompted to select a scanner and a scan profile/preset each time I try to scan a document to PDF using Adobe Acrobat Pro.

Hello,
I have a fujitsu scanner (fi-6140) connected to my computer and have the "Scan" button on the scanner associated with Adobe Acrobat. And so when I press the "Scan" button on the scanner to scan a document, it launches Adobe Acrobat Pro automatically. Then I get prompted to select a scanner/device and a scan profile. It seems to remember the last-used scanner/device, however; it still prompts me each time to confirm the scanner/device selected and select a scan profile to use. Is there a way to save both the scanner & scan profile information and so when I click the "Scan" button, it doesn't prompt me to select but starts scanning using the last-used settings automatically?
Thank you.

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

Please explain Virus Scan Interface?

When we run virus scan on SAP server CPU utilization go high ,SAP team advice us to disable the virus scan.
They told us that they Virus interface in SAP. My question how it work is it ok not to install Antivirus softwares on SAP server

Architecture of the Virus Scan Interface & help me in defining Defining Scanner Groups
The structure of the Virus Scan Interface allows you to combine different products, systems, and platforms to scan your applications for viruses. This is possible, since SAP provides a certified interface for the virus scan products of other vendors.
The partners virus scan engines can, for example, have completely different architectures. However, by integrating an adapter using a proprietary connection, any partner can, however, connect any existing virus scan product to the virus scan interface.
On the SAP side, different VSILIB layers are used to include the ABAP and Java worlds, and to deal with platform dependencies (of operating systems and processors, that is, 32 or 64 bit) in the integration of the virus scan interface.
Use
A scanner group combines multiple virus scanners of the same type to allow load balancing. Since you select the virus scan server using the scanner group when maintaining the virus scan profile, you must assign each virus scan server to a scanner group.
Maintain a scanner group for each product class of virus scanners that are connected to the system using the virus scan server. If you include your own virus scanners with the BAdI VSCAN_INSTANCE, create a scanner group for each implementation of your own scanner and identify these as BAdI implementations.
You can store configuration parameters for each scanner group. These are divided into initialization parameters and scan parameters:
        Initialization parameters are transferred to the virus scan server when it is started, and are required to be able to start the virus scan server. If you use the Business Add-In, these parameters for the method of creating the scan instance are transferred. The parameters contain, for example, the path to the virus signatures.
        Scan parameters are transferred for each scan process and control the behavior of the individual request, such as yes/no for activating the scanning of macros.
For information about which configuration parameters are required or supported by the product that you use, see the documentation for the product.
SAP does not deliver any scanner groups.
Procedure
       1.      In the Implementation Guide, choose (IMG) SAP Web Application Server ® System Administration ® Virus Scan Interface.
       2.      Choose the Execute option next to Define Scanner Groups.
The screen View: Change "Scanner Groups": Overview appears.
       3.      Choose New Entries.
The screen New Entries: Overview of Added Entries appears.
       4.      Specify the data for the scanner group.
Data for the Definition of a Scanner Group
For more information please refer to be link this quite helpful
http://help.sap.com/saphelp_nw04s/helpdata/en/68/c9d8375bc4e312e10000009b38f8cf/frameset.htm
I hope it will be helpful to you.
All The Best
Priyanka
Do Reward Points.

Virus scanning of files before storing into SAP

<b>Hi,
I'm about to implement BAdi VSCAN_INSTANCE to integrate virus scanner into the virus scan interface. I would apprecaite If anyone can provide me information on how to configure scanner groups, virus scan servers, virus scan profiles and implement virus scanning BAdi.
Thanks in advance.</b>

The Online documentation might help you:
http://help.sap.com/saphelp_erp2004/helpdata/en/20/51773f12f14a18e10000000a114084/frameset.htm
Also check OSS note 807989 & 797108.
Peter

Virus Scan Interface for SAPu00BF?

Hello!:
We have a NW2004s installed in a Windows Server 2003 SR2 Enterprise Edition SERVER, and we want to install the Virus Scan Interface.
In Note OSS 817623, SAP explain how to integrate a virus scan into SAP applications.
Do you know this solution???? (Performance, Quality, etc)
Thanks in advanced...

Hi,
We are facing same issue with upload of file.
Error is as follows.
virus scan profile /SIHTTP/HTTP_UPLOAD is not active.
But We are not able to find this profile in Virus scan profiles.
I search for this profile, but not got any info abt how to maintain it.
So can you suggest something here.
Regards,
Abhay

Virus scan server error - when submit to sap

Hey all,
i am getting an error when i submit my project into sap repository.
i can connect to the sap system without any error but it says me that i have to create a virus scan profile for ui5 when i search for the virus profiles on img i can see /UI5/UI5_INFRA_APP/REP_DT_PUT profile.
the error that i am getting the fallowing error...
File .settings/.jsdtscope could not be submitted Virus scan server error: "Recursive occurrence of virus scan profile /UI5/UI" ( path: .settings/.jsdtscope )
File .settings/org.eclipse.jdt.core.prefs could not be submitted Virus scan server error: "Recursive occurrence of virus scan profile /UI5/UI" ( path: .settings/org.eclipse.jdt.core.prefs )
...........it goes....
my virus provider
glad to hear your helps.

Hi Abraham,
Thank you very much. My problem resolved.
I have one Query Please guide me.
whenever we run Server URL from The Browser, first we must need run "chrome.exe --args --disable-web-security" command on CMD. on located directory the Chrome has installed.
to disable web security.
if I did not run that command on CMD, then Fiori Apps not worked.
Why it's compulsory to disable web security.
Regards,
Pankaj Kamble

Virus Scan profile Activation and Configuration

Similar Messages

Maybe you are looking for