Virus scan wont complete - shuts computer down

I try to keep my computer as clean as possible, but no matter what I do, there are CONSTANT issues with these things.  Im on my third thinkpad now, the T430, and this one is no exception.  Several glitches have begin to arrise and when I do a Malwarebytes Anti-malware scan, it shuts my computer down when it gets to around 180000 files scanned.  Could this be a virus doing it?  I have re-formatted to factory settings several times, but no windows OS disk to do a re-install.  Any help would be greatly appreciated.  Thanks all, have a great night.

Looking at your first post.
What do you mean "re-formatted to factory settings"?
If you created the recovery DVD's you can do a clean install but I would wipe the partitons first before installing it again. If you did not created them. You'll have to order a set.
What OS are you using? You may have a driver issue but there isn't anywhere near enough information. All I can say is to do a clean re-installation from the Lenovo DVD's for that model and test and take if from there. If Malware crashes it in Enhance Normal mode you likely have a hardware problem. But do the test before any other software is installed. It should run normally with the factory image installed.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Similar Messages

  • Maverick downlowd o.k. but now updates stuck and cannot shut computer down.

    Maverick downlowd o.k. but now updates stuck and cannot shut computer down.

    Hello Kking317
    If any application is stuck, you can Force Quit the application and then you can restart.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Regards,
    -Norm G.

  • Currently on Mountain Lion. Tried to upgrade to Yosemite. Computer is now locked onto OSX installation page. No access to finder or anything. Have to push off button to shut computer down.

    iMac running Mountain Lion.... Yesterday, I tried to upgrade to Yosemite. System seemed to be upgrading. However, the OSX installation window is now frozen on the computer with the blue bar showing installation complete. I do not have access to even the finder. Force quitting with keys is not working. The only way I can shut the computer down is to hold down the on/off button. Restarting brings up the same frozen OSX installation window. What to do?
    Cherie

    There are three ways:
    A. Reinstalling Yosemite, Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    B. Install or Reinstall from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Yosemite: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    C. Internet Recovery
    Install OS X Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Yosemite: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • ITunes 7 shutting computer down

    Ever since I downloaded iTunes 7, whenever I attempt to sync my iPod it says the playlists cannot be found. Then when I try to add the playlists and update the sync mode, it shuts my computer down. iTunes also shut my computer down when I tried to update the software on my iPod. I didn't have any problems until I upgraded to ver.7. Any ideas or suggestions???
    DELL Dimension 8200   Windows XP  

    See this for the playlists cannot be found message...
    http://discussions.apple.com/thread.jspa?messageID=607312
    As for your computer shutting down when iTunes is open... You may want to post in the iTunes forum or search the Discussions and see if anything similar has come up, and if there are any solutions.
    Do you ever have iTunes open when the iPod is not connected? If so, does your computer shut down? Or does it only shut down when you connect your iPod?
    btabz

  • SECURITY DOWNLOAD Adobe reader 9.3.1 Shut computer down?

    I downloaded as prompted for a security adobe reader 9.3.1. Then restarted computer as instructed. It shut my computer down with error bad_poop_header. stop: 0x00000019 (0x00000020, 0xE1982000,0xE1982108, 0x0c210200). What is wrong with this download on window xp?

    Even if you spelled it right or wrong, we have no idea what it represents. The data would have to be put into a compiler of the program to find the error. Since you have the free Reader (as everyone has said, related to the Reader forum, not this one), it is probably simplest to simply uninstall the current version, use the MS install cleanup utility to clean your system, then download Reader fresh and install again.

  • Command to shut computer down when an application task is complete.

    Hi, I'm pretty new to Automator. I was wondering if there was a way I could set it up so my iMac either goes to sleep or shuts down once a task, such as exporting a video with Compressor or Final Cut Pro, has completed.
    thanks,
    Kyle

    See '''hang-at-exit''' in this support article. <br />
    https://support.mozilla.com/en-US/kb/Firefox%20hangs

  • I called my apple care for support. I purchased iTunes Match and after I brought I have been waiting 12 hours and it is still in  step 1 of 3 waiting to complete????? I have shut computer down and brought back up still will not complete steps

    I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

    I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

  • Is it harmful to always leave several programs open and never shutting computer down?

    I never shut down my computer and simply let it to sleep.  I also let it sleep and leave several programs like illustrator open all the time.  Is this good for the computer or should I be closing down applications regularly?

    If your system is powered through an uninterruptible power
    source, there is no issue at all.
    If not, there is always the possibility of something going bad
    should a power outage occur.  This is true whether apps are
    open or not.  Modern systems can recover from such an event,
    but nothing is totally bulletproof to such an event.

  • Shutdown restarts after a few minutes and sleep shuts computer down.

    When I shutdown my computer, the shutdown process starts, computer goes into "logging off"  and continues for a few minutes before restarting automatically. When I go into "sleep mode" ,  computer appears to go into the proper mode, but a few minutes later, shuts down. When I log on again, Windows advises that I had an abnormal shutdown.  Sleep and shutdown appear to have reversed for some reason.

    Hello hankaree,
    Knowing what model computer you are using and what operating system you have will allow me to provide you with exact instructions if needed, however try disabling all non Microsoft applications to startup on the computer and put the computer in a clean boot state.
    1. Click on start
    2. Type in the search field or click on the run application depending on your OS
    3. Type MSCONFIG
    4. When the mosconfig window comes up click on the startup tab
    5. Disable all
    6. Reboot
    7. Test
    If the system behaves as normal then we can start enabling things to see if we can find what is causing the issues. If the problem persists we can start trying to looking at other solutions.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Disk Restore Shuts Computer down

    Ok, I've got the iBook g3 like the green and blue mix. I have 9.2 running on it right now but I want to completely wipe it out so I insert the Mac os 8.6 original restore disk (Orange). I hold the C button on start-up and watch it load off the CD. Now when it just shows the toolbar from the desktop and battery indicator the computer shutdowns, (screen flashes) Now I have tried the process many times and it hasn't worked. Anyone know what's up?

    Well I don't know if I can help or not but I can try. Since I am not up on OS 9 or OS8 or your iBook, I'm going to have to extrapolate from what I do know of OS X and hope that what I say will be relevant. I feel bad that you haven't been able to get any real help so far, so I will try, but in all honesty, I will be going pretty far out on a limb here.
    Not being familiar with this particular iBook, I'm not sure I entirely understand what you are doing. I gather that you want to erase your startup disk and install OS 8.6.
    I assume that you have Disk Utility. Before starting out, did you go to Disk Utility and verify the start up disk and repair if necessary? If you have Disk Utility and can do this, that would be good to do.
    As I understand it, you cannot install an older system over a newer one--you have to erase the newer system first. You can do this with Disk Utility, or your Install Disc #1 might give you that option. So you have to be sure you erase OS 9 before you try to install OS 8.6.
    After installing OS 8.6, you need to go to Disk Utility again and verify both permissions and the disk and repair if necessary.
    If you have an Apple Hardware Test it also wouldn't hurt to run that, just on general principles. Just to be sure there isn't a hardware problem giving you difficulties.
    All this is just general advice which I hope pertains to your situation and will help. If it isn't, maybe one of the more knowledgeable and experienced members of the forum will be incensed enough at what I have written to be inspired to post something more helpful to you.
    Good luck!

  • Firefox thinks its running but not responding shut computer down won't clear deleted and reinstalled still won't clear , what next?

    I have seen this error before and normally if you close down you system and restart it will clear up but not this time. I even uninstalled and reinstalled firefox. started this morning when facebook went down for maintaince. that was about 8 it 2 now and I still can't clear it what can I try next?

    See
    * [[Firefox is already running but is not responding]]
    Try closing any running instances of ''firefox.exe'' (and plugincontainer.exe) using something such as Task Manager. That should allow you to then restart Firefox.
    As for iLivid. Possibly it also has associated apps or extensions with names not including the word iLivid. Looking at their own FAQs there are instructions to remove iLivid using the Windows Control panel, and mention of other bundled software that you may wish to remove. It seems it is more of a nuisacne rahter than out and out malware.
    * see http://www.ilivid.com/faq.htm (page scrolls for more info) but includes:
    How do I uninstall the software?
    The software can be removed in a simple was like any other software:
    Go to the Windows Start menu and then to Control Panel > Add/Remove ("Programs & Features" in Vista & Windows 7) and click "Remove" next to the software name (e.g iLivid Download manager / Windows iLivid Toolbar ).
    During the installation bundle software are offered, each can easily be removed following those instructions: Uninstall Yontoo Addon , Uninstall Search Toolbar (powered by Bing) or Uninstall Babylon.

  • After entering a Search topic, then receiving, 10 or more suggestions, reviewing one of them, HOW DO YOU GET BACK TO THE OTHER NINE ??? WITHOUT COMPLETELY SHUTTING FIREFOX DOWN???

    OK, So I'm NEW to Firefox, however I'm a Computer user for more then 26+ years, so although not a GEEK, I'm fairly knowledgeable how to use most venues.
    I open Firefox to search for a specific environment, after receiving the selections I click on one to review it. I try to go back to the original page of selections, but the ARROWED BACK BUTTON does not go back, Then I click the right mouse to go back that way, and it is either grayed out or does not function as intended. I try to close the original page, but No option is available other then to QUIT, which is not what I want.

    See also:
    *Tools > Options > Privacy > History: "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete
    The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
    Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Just tried installing an update to OS.  Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.

    Just tried installing an update to OSX Snow Leopard.  Prior to trying to update OS, I was running V 10.6.3.  During installation, it locked up.  Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.  What do I do now?  Help!

    Hold the power key till it shuts down, it may take a little while, try holding it thru the warning.
    Then if it shuts down restart and open Safari/Preferences, General tab, and set "Save Downloaded Files to:"
    Select desktop, if desktop is not available in the the drop down menu, click other, then select Desktop from the column from the on the left.
    Then download this:
    http://support.apple.com/kb/DL1399
    This will download the "stand alone installer"
    Click on the installer pkg and follow the prompts.
    Hope this helps

  • Computer completely shuts down

    For the past two days I have been working in illustrator and with about an hour or so left on my battery my computer completely shuts down. I have now lost 2 days worth of work. Extremely frustrated!

    Run Apple Hardware Test on your MacBook Pro.  Also run disk utility to repair your hard drive and permissions.
    Battery information. 

Maybe you are looking for

  • Function module is not working properly in background

    Hi  all, i have used one Function module 'PRICING' in user exit SAPMV45A to calculate pricing for sales order. i am using BAPI_SALESORDER_CHANGE to change the sales order pricing.         when i run the program in foreground, all condition records fo

  • Connecting WRT54G to Enterprise Network

    I want to connect my WRT54G to an Enterprise network and allow wireless users to access the internet, but not my intranet. Are there setting configurations in the 54g that will allow this? The WRT54G does not broadcast and is encrypted. The wireless

  • Bug when animating line chart

    Hi...really perturbed by this. I'm trying to animate a line chart with the "grow" Build in, but it appears to blink right at the end of the animation. I've tried doing it with a brand new line chart using the default data as well as with custom data.

  • Cant import old iPhoto library

    I've just swapped Mac's, and i have copied over my iPhoto library. When i open iPhoto, i can open the library and view it, but when i close the application and restart it, it says it can't find a library. Any help would be appreciated...

  • The form BDC_DYNPRO does not exists.

    Hi, I have copied an ABAP (BDC) code. It is working fine on the original system but on the other system, where i have copied it, it is giving an error. "The FORM BDC_DYNPRO doen not exist". The code is perform bdc_dynpro      using 'SAPMF05A' '1100'.