Virus with MacBook

I realize Apple computers are for the most part, virus free. Still, I assume that my Windows VM (Parallels) can be infected with a virus IF I use IE from within Windows.
Is this a correct assumption? If not, I would like to garbage can my Windows virus protection as it is a pain that slows or delays my various Windows operations while I wait for it to do it's daily update.

Abolutely. A Windows system running under Parallels (or any other method) is a Windows PC and is subject to every bit of malware any other Windows system is subject to. So you need to run the same sorts of antivirus and antispyware protections you would if you were running Windows on separate hardware. The only difference is that, as zplus indicated, a Windows malware would be unlikely to be able to affect Mac OS X, though it's not impossible (it's more likely to be able to affect the entire hard drive for those running Windows under Boot Camp than those running virtualization where the Windows "drive" is basically a file).
Message was edited by: Dave Sawyer

Similar Messages

  • What is the best anti~virus for macbook pro?

    What is the best anti~virus foe macbook pro?

    None whatsoever. I'm sure that you've heard the line that "Macs don't get viruses"? That's almost true - Macs can be infected with malware, however, and can pass viruses onto PCs. See Thomas Reed's Mac Malware Guide. The only two virus packages that are usually recommended are both free - Sophos and ClamXav. If you feel that you need AV software, try one or both.
    Good luck,
    Clinton

  • Safari opens in loop with macbook - trojan message win32xepcj

    Safari opens in loop with macbook - trojan message win32xepcj
    I can only close Safari

    It's not a virus. It's a JavaScript scam that only affects your web browser, and only temporarily.
    Some of those scam pages can be dismissed very easily. Press command-W to close the tab or window. A huge box will pop up. Press the return key and both the box and the page will close. If that doesn't happen, continue.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Security
    and uncheck the box marked Enable JavaScript. Leave the preferences dialog open.
    Close the malicious window or tab.
    Re-enable JavaScript and close the preferences dialog.
    If the Preferences menu item is grayed out, quit Safari. Force quit if necessary. Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.

  • I transferred big files from windows to my macbook, should I install anti-virus on macbook pro?

    I transferred big files from windows to my macbook because I wanted to retire my old PC, should I install anti-virus on macbook pro because of those files I moved? Would you recommend? Or should I feel comfortable since I'm using OS X Mavericks? Anybody with the same case? Thanks.

    Files moved from a Windows machine may contain malware, but that malware would not be a threat to your Mac. Windows malware cannot infect a Mac.
    As for protecting your Mac against Mac malware, see my Mac Malware Guide.

  • Battery Problems with MacBook

    I've been following the various threads about battery problems with MacBooks.
    I too have experienced a problem with my battery on a 2 month old MacBook.
    It suddenly refused to charge. It showed a battery icon with a black X through it.
    I followed various suggestions that I found through various posts and support pages - eg. resetting PMU etc., even downloading the deep sleep widget which I found difficult to get to work - but nothing solved the problem.
    Yesterday I went in to the Apple Store in Birmingham and waited until I could talk with one of the tec experts (incidentally, they were very helpful even though very busy and I didn't have an appointment). The tec guy said he though that the battery was faulty. It didn't work in another MacBook they had. But another battery would work in my MacBook. So, I was given a new battery, which seems to work fine now.
    However, I have read in various posts that people have had the same new battery solution which works, but then the problem reappears with the new battery over time. I will wait and see. If that is the case, then I think it will point to the problem not being with the battery, but rather with the system, PMU, OS X, motherboard or whatever. So, I think it makes sense for us to post any difficulties we have so that Apple can see that there might be a problem with the batteries in MacBooks and start working on a solution. Otherwise, it will probably cost them a lost of money providing replacement batteries !
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  

    Hey Christopher...
    I posted the same in another thread. I'm not a big fan of duplicate posts... but it seemed appropriate in this case. Take a look at the last paragraph regarding discharging lithium ion batteries. I'm not sure if it would be the electronics in the battery that tell the MacBook it's time to charge, or the MacBook's power management unit...
    "Talk about a jinx! I've had my MacBook since shortly after they came out (week 9). Never had any problems. I've calibrated my battery about once a month or so. It seems after my last calibration, I got the dreaded "X" in the battery indicator. My MagSafe indicator was green. System Profiler showed that there was no battery. I reset the PMU and the SMC firmware... also tried reseating the battery (one of those things you're sure won't work... but ya just have that little bit of hope anyway). Alas, nothing would bring my battery back. Took a trip to my local Apple store. I had made an appointment online, but still had to wait over an hour (they really need to enlarge their Genius area now that they have so many more machines out there). Told the Genius what the problem was... he swapped out the battery... but the one he tried was fully charged because he took it from a machine that was plugged in. So the tension was mounting... would it charge or not (I was hoping it was just the battery and not something else). He had me use my MacBook for a bit to drain the battery. I ran Parallels and did a Windows virus scan (that should drain the battery pretty fast)... After I got the battery down to about 90%, the Genius plugged it back in. To my delight, the MagSafe indicator went orange and started to charge the battery. With that, the Genius went in the back and got me a new battery. He had me stay there for a little bit just to make sure everything was okay. I'm sort of afraid to calibrate my battery now... at least properly as in letting it completely drain. I had done a few calibrations in the past without a problem, but it seems this problem tends to occur after someone does a calibration. I'm just happy it was just the battery.
    I came across this little tidbit from the Battery University webiste:
    Some lithium-ion batteries fail due to excessive low discharge. If discharged below 2.5 volts per cell, the internal safety circuit opens and the battery appears dead. A charge with the original charger is no longer possible. Some battery analyzers (Cadex) feature a boost function that reactivates the protection circuit of a failed battery and enables a recharge. However, if the cell voltage has fallen below 1.5V/cell and has remained in that state for a few months, a recharge should be avoided because of safety concerns. To prevent failure, never store the battery fully discharged. Apply some charge before storage, and then charge fully before use.
    I wonder if there is a fault with some of the batteries that is allowing them to discharge below this minimal level, making them impossible to recover."

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • IPhone no longer syncing with Macbook/iPhoto

    Phone though synced to another Mac would handshake with Macbook and allow photos to be uploaded. No longer
    It also no longer appears in iTunes.
    Basically its not there as far as the Macbook is concerned and I'd really like to upload some photos. What gives? Used to do this no problem.
    TIA

    You can no longer sync via iTunes. That method of sync was removed (and the 1000+ post thread is arguments over things tangientally related to that).
    You need to sync via other means than iTunes, then.
    One option is to use iCloud. If you sign into iCloud on all your devices, and then make sure your calendars are in the "iCloud" section on your devices, they should sync.
    If you don't want to use iCloud, you could use Google calendars, they operate much the same way (but may be less reliable).
    Or if you use Exchange for work, you could sync that way.
    Or if none of those are acceptable, you could install OS X Server and set up the calendar server on your local network and use it to sync. This is fairly straightforward "for setting up a UNIX calendar server" but it's not trivial and beyond the scope of a forum post to explain it all

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Is there any Sound card 5.1 include stereo mix that working with MacBook Air such as Creative Labs SoundBlaster X-Fi Surround 5.1 Pro Entertainment System ? and if there any another sound card can you tell me what is it please ? Thank you.

    Okay, I did my best searching and I couldn't find anything that matched all your descriptors. I did do a search on both decoder numbers. SB0256 returned very little results, but with SB0466, I was able to find this ebay listing:
    http://cgi.ebay.com/ws/eBayISAPI.dll...6_fvi%3D&_rdc=
    This card isn't a Champion like you suggested. And with my complete lack of knowledge, I don't know what I/O dri've bay means. But since it is PCI and the decoder matches the number you gave me, this card should be adequete, right?
    Whether it works or not, my search indicated it might be very hard for me to find that card (or any PCI card for that matter). Everything I saw was out of stock. I know this is a forum for Creative, but are there any other manufacturers that will allow me to accomplish my goal, either with current cards, or discontinued cards? Thanks again
    Oh, and I will vote on that thread. I probably won't wait for them to release the decoder since I need it now, but I still believe Creative should be giving the customer what they want

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    Read through this:
    http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

Maybe you are looking for

  • EBS 12.1.3 RAC to RAC Cloning

    BismillahirRehmanirRahim Dear All, I need to Clone our Production EBS Environment from RAC to RAC with Shared APPL_TOP and Multi Tier Appl Tiers. We have EBS 12.1.3 Environment with 2 Appl Tier Nodes with Shared Appl_Top & EBS DB is on 11gR2 RAC 11..

  • The dreaded folder icon

    Here's the complete story. I've tried looking through everyone's advice on similar topics but it doen't seem to work, and I'm very confused now. Got an Ipod Nano 4GB for Christmas. Installed the itunes software on my PC Imported a couple of CDs onto

  • PostGre SQL Query In JavaScript

    Is it possible to run the query in the javascript. I wil b passing an id from the jstl to a method which is implemented in javascript .using that id can i access the values from the database? plz send me some dummy code if possible Thanks ..

  • Could I change the default temp folder(C:\Windows\Temp)?

    Post Author: h1i9k7o2 CA Forum: Crystal Reports Hi All: My web server is IIS 6. Sometimes the temp crystal report objects could not dispose when I close IE. I have some codes to control the evnet(colse IE to dispose CR objects) but the result is not

  • Illustrator CS4 switches on, then quickly turns off - help

    For the past few days I have have been experiencing problems with my product. As soon as I turn it on, it doesn't even make it to the opening dialog box (the one where it says New or Open etc). It briefly shows the box (blank) and the interface with