VISA -107380733​8 can anyone give me a better definition of what causes this error, other than the descriptio​n provided in LabVIEW help?
I have been seeing a recurring instance of this error recently, that I am not completely understanding. Can anyone better explain what may be occurring when this type of error occurs.
Feel feel to speculate, but I was hoping maybe a designer might chime in on this.
Well, if I were the designer of the error code, I think I could probably give an idea of what kinds of circumstances might cause this error to occur, regardless of the application.
However, if it helps, here is the problem. I have an ATE program that performs thermal cycling for a UUT using VISA calls to a GPIB controller which communication with 3 different instruments. The test itself runs fine for long periods of time, and then I start to see this error occur. However, the program appears to continue to run after I press 'OK' from the pop-up dialog ackowledging that the error has occurred. There appears to be no evidence of a memory leak that could possibly be contributing to the problem, or at least none that I have detected, and the error description itself is very vague. So basically what I am looking for is a better understanding of what MIGHT be causing this type of error. I would not expect a specific cause for my particular application, because as Bob was so kind to point out, I hadn't offered much information in my original post. What I was really looking for was a better understanding of the error itself, from a 30kft point of view.
Thanks Bob_Schor for pointing out the deficiencies of my original question, it's posts like yours that make this discussion board a wonderful place to have a professional discussion.
Similar Messages
-
Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?
Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?
Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
Mylenium -
I have an iMac with OS X Yosemite installed, ever since, I cannot always open Safari, if I do it will shut down for no apparent reason and so can someone give a new beginner some help please?
When an application crashes, the pertinent information is in the crash report and the log.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Can anyone give me some insight on how to create this layout?
Is there a tool to turn a photo into a sketch, or do you think these handbag images were created with another application?
Each Item is on its own layer that has layer mask that is linked to the layers content and cuts out the object. When you move the layer content the linked mask also moves to keep the object cut out. The layer stack order controls the over lapping layers visibility. So you can move around the object in layers above the background layer.
Layer style can be added to the layers most there have drop shadows styles added.
Composits, Montarges and collages are created with layers, layer mask, layer styles and adjustment layers, They basically the same.
Photo Collage Toolkit
Photoshop scripting is powerful and I believe this package demonstrates this A video showing a 5 image collage PSD template being populates with images:
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples -
Can anyone give the name of the center to write SCJP Exam available in visa
can anyone give the name of the center and its location to write SCJP Exam available in visakhapatnam city, Andhra pradesh,INDIA ?
ThankqHi Suryakiran,
You can contact NIIT or SEED infotech or Aptech computer institute or any other computer institute over there having "prometric testing center facility" ....
It's simple ....
fees are around Rs.4500 to Rs.6000 /-
I think this info. will help you.
Cheers---
Akshay_L -
Can anyone give a good contact number for someone in the upper level of customer service
can anyone give a good contact number for someone in the upper level of customer care i have talked to two of the worst people from customer service, the "supervisor" who was very appropriate did give me a address to mail a complaint which i will but being a disabled veteran of the Iraq war and a member of the wounded warrior project i get upset at certain people who show no respect for the average person and even worse of an attitude to those injured serving their country. I'm in no way saying I'm better its just that i expect a grain of respect as a person, a fellow American working everyday just to get by. my issue was not an impossible issue to resolve but i was told by one rep that it was not possible after my call being "dropped" i called back and talked to another. Luke from call center Washington state told me it was possible but that the phone i ordered two days prior (that rep failed to finish the order)was no longer available and i could pick a different phone not on back order.......i mentioned my confusion to the lack of service and being told two separate things. i asked why this was when i was not the one who made the mistake he told me it was not there fault and pushed the blame to me....he then called me dude and started to speak over me. when i asked to speak to a supervisor he asked why i told him i was no longer interested in talking to him he said why, i asked to be transferred again he kept refusing saying listen man I'm trying to help you what do you want. i asked to speak to his supervisor at least three more times he refused. i asked for his employee information so i could call back to report his rude behavior he refused to give me anything except at the end he finally told me his name.. there is more but my hand is tired is there anyone who can help me? if i find an answer as i will be posting this to many sites i will post it here.
Hello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport -
Can anyone give me a contact email for Apple Customer services?
I would rather not rant on here!Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Can anyone give me their HP w2207/w2207h monitor settings?
I am about to buy an HP w2207h monitor to hook up to my MacBook Pro via a straight DVI-HDMI cable (not an adapter).
Can anyone give me their brightness, contrast, color, etc. settings that seem to work well for maximum clarity and crispness in OS X? Also, any other settings that I should set via the OS X System Preferences panel as well?
Thanks.The next would be to perform a monitor reset. It's in the Menu (button on monitor).
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanksClick here for options.
(69081) -
when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..
First thing i would try is to use another cable if available.
-
Im travelling to New York soon and consrdering buying a iPad while out there. Can anyone give me advice what i need to buythanks.
to allow me to use it back here in the UK?? Many thanks
Mark thBuy the "AT&T" model iPad, not the Verizon one (which does not support SIM cards used most everywhere in the world). The ATT model comes with a SIM card, but you can then get one from a UK provider. Be sure it's a "microSIM" card, not the larger kind when back in the UK.
-
Can anyone give me user exit name for create/update purchase order partners
Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.hi,
check these exits.
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number -
Lightroom wants to me to install 5.6, but the download link takes me to a page with plain text bullet points, none of which are the update link. Can anyone give a direct lnik?
Google "lightroom 5.6" and direct links to both Mac and Windows will be at the top.
-
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom -
Can anyone give a good contact number for someone in the upper level of customer care
Duplicate post - please see:
can anyone give a good contact number for someone in the upper level of customer service
Message was edited by: Admin ModeratorHello hazzard0011, I want to first and foremost say we truly appreciate your hard work and dedication to our country. It is our commitment to provide a top notch customer experience. My apologies that this hasn't been the case in your recent interactions. We can definitely submit feedback to our upper leadership regarding the matter. Can you please send us a direct message so that we can further investigate? Also, please share details regarding the initial issue. Here's steps to send a direct message: http://vz.to/1b8XnPy
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport
Maybe you are looking for
-
Using script on multiple files in a folder.
THis has GOT to be easy, but I can't figure it out. Walgreens wants you to email photos to them, but I usually do like 50 photos at a time. So, I created a script that takes an object and emails it. The problem is, I don't know how to do it to one ph
-
Insufficient remaining store credit... But I have!
I'm brazilian, but I have an Apple ID with an New York adress and no credit card. I bought $30 in iTunes gift card and put in my account. But, when I click in BUY APP, the Mac App Store says that I have "Insufficient remaining store credit". What do
-
Deployment failed due to addition of few components
Hi Masters, Actually I have deployed my application, it has been deployed properly. Then i have added one more form in the iview. Then when I try to deploy then it is failed. Is there any memory limit to iview. I hope it is the problem I got to know.
-
Hi Everyone. I am using oracle 9i database and using forms 9i . I am trying to store customer name in hindi .I am trying the following:- 1. The prompt of text box should be in hindi. 2. The input text box should be able to accept text in hindi. 3. Th
-
Transferring Files from my Mac to a Hard drive
Hey guys! So I have some videos on my hard drive for my mac that I am trying to move to an external hard drive. The movies are both AVI and MPEG 4 files. I play the AVI Files using a VLC player and I pplay the MPEG 4 files using quicktime. When I try