VISA do not find RAW device in linux??

Hy. I have usb device with product ID and vendor ID. My operational system is Linux Fedora. Linux system find my device,but Labview (VISA) do not find this device.Can somebody tell my, where is the problem??

Hello qwqwqw,
Dennis is correct, and that is the document you want to reference.  Specifically, Part 4 is about USB on Linux and Mac.  Officially though, National Instruments does not offer email or phone support for Linux Fedora.
Good luck with your application!
Meghan
Applications Engineer

Similar Messages

  • Create the raw devices under Linux

    Hi,
    Hoe can I create the raw devices under Linux?

    Hi,
    I just have created two raw devices,
    1, /etc/sysconfig/rawdevices
    /dev/raw/raw1 /dev/hda2
    /dev/raw/raw2 /dev/hda3
    2, chown oracle:dba /dev/raw/rawN and chmod 660 /dev/raw/rawN
    3, after restart the machine, start I runInstaller again.
    But Oracle can still not find the candidate disks, even after give the path /dev/raw
    Why?

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • TS3694 mi ipod touch will not boot, it goes to the apple logo then shuts off, I tried to restore it but it shuts off while restore is going on then it saids it can not find the device

    Hello,
    I need help before i go to the apple store for help.
    My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
    It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
    I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
    What do i need to do.
    Thank you for your help.
    regards,
    Mario
    PS. The OS I am not sure do not remember exactly.

    - Reboot the computer
    - Try another USB port
    - Try another cable try another cable
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • IPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar.....Help!

    iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!

    You can use iTunes, connect iPod Touch to computer iTunes.
    Select iPod Touch in iTunes under DEVICES (left panel)
    Select Books tab (right panel near the top)
    Deselect those books that you have read
    Click Sync button (bottom right)
    Have a read to get up to speed using iPod Touch
    iPod touch User Guide (For iOS 5.0 Software)

  • Raw devices under Linux 2.4.x

    Hi.
    Does Oracle 8.1.7 support raw devices under linux 2.4.x? Is there some documentation? What advantages/disadvantages? Is it worth moving from ext2 to raw?

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Andrij Korud ([email protected]):
    Hi.
    Does Oracle 8.1.7 support raw devices under linux 2.4.x? Is there some documentation? What advantages/disadvantages? Is it worth moving from ext2 to raw?<HR></BLOCKQUOTE>
    Oracle does fully support raw devices. For a mini cookbook, search on "raw device". I've put up a mini story on how to make raw redologs.

  • BlueTooth can not find any device or cell - TOSHIBA Qosmio X505-Q894

    I have a  TOSHIBA Qosmio X505-Q894 win 7 64 bit My Bluetooth will NOT find any devices.... Including my phone, HTC evo 4g. I'm at a coffee shop and my phone sees 6+ items and my PC sees none I have uninstalled all the Bluetooth devices in Device Manager and reinstalled Toshiba Stack 6.4 and 7.xx differenttimes. I also have turned off "auto windows driver update" so it didn't interfer with the toshiba download drivers. I have made my phone discoverable and also my phone does not see my laptop even....
    THE actual problem - WILL NOT detect anything. http://official3.com/toshiba/wififail.gif
    PICTURE OF my F8 controls http://official3.com/toshiba/F8.gif
    My Device Manager - everything is "working" http://official3.com/toshiba/device-manager.gif
    Bluetooth logo in corner. http://official3.com/toshiba/wififailcorner.gif

    Anyone? Please help!

  • Why will my iphone 4s not find any devices with blue tooth it just keeps on searching

    why will my iphone 4s not find any devices with blue tooth it just keeps on searching...??

    If you're trying to connect to another Apple device you can't, it's not supported.
    Here are the supported profiles http://support.apple.com/kb/ht3647

  • CREATING RAW DEVICE IN LINUX

    HI ALL,
    in redhat linux 5 how to format the disk(ex: /opt,/u01,.....) and make it as raw device for ASM installation

    DSP_863977 wrote:
    HI ALL,
    in redhat linux 5 how to format the disk(ex: /opt,/u01,.....) and make it as raw device for ASM installationit is not possible to change a mount /opt or /u01 for ASM storage.
    for learning purpose you can learn with vmware server to create a raw device to configure/install ASM.
    Refer the link:- shared storage part for linux5/rhel5
    http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
    for more information refer the link:-
    http://download.oracle.com/docs/cd/B28359_01/server.111/b31107/asmprepare.htm

  • [SOLVED]Failed to find root device after linux (3.6) upgrade on raid 1

    on a test machine pacman -Syu offers linux-3.6.2-1.
    After a successfull update the system won't boot anymore with the following error:
    [ 0.000000] tsc: Fast TSC calibration failed
    :: running early hook [udev]
    :: running hook [udev]
    :: triggering uevents...
    Waiting 10 seconds for device /dev/md1 ...
    ERROR: device '/dev/md1' not found. Skipping fsck.
    ERROR: Unable to find root device '/dev/md1.
    and the machine gets thrown to a recovery shell
    /boot/syslinux/syslinux.cfg entry:
    LABEL arch
    MENU LABEL Arch Linux
    LINUX ../vmlinuz-linux
    APPEND root=/dev/md1 ro md=0,/dev/sdb2,/dev/sdc2 md=1,/dev/sdb3,/dev/sdc3 md=2,/dev/sdb4,/dev/sdc4
    INITRD ../initramfs-linux.img
    any ideas?
    Last edited by whoop (2012-10-16 22:51:05)

    If I upgrade to linux 3.6 with this line:
    HOOKS="base udev autodetect pata scsi sata mdadm filesystems usbinput fsck"
    in /etc/mkinitcpio.conf, the system is able to boot.
    if I upfate to linux 3.6 with this line:
    HOOKS="base udev autodetect pata scsi sata mdadm_udev filesystems usbinput fsck"
    in /etc/mkinitcpio.conf the system is not able to boot.
    I gathered that the mdadm_udev hook was preferred but it seems to cause problems in this case.
    After I successfully upgrade (having "mdadm" in /mkinitcpio.conf) I can change "mdadm" to "mdadm_udev" and
    the system will still boot fine.
    Does somebody know what gives?
    Last edited by whoop (2012-10-16 00:13:07)

  • How use raw device in linux?

    Hi all.
    scene:
    oracle 8.1.6.1
    Linux red hat 6.1
    I'm trying to create a database with raw device.
    In HPux the raw device is /dev/rdsk but I found no documentation for linux raw device.
    thanks for any help.
    null

    Prove it: try to create file large than 2Gb on 8.1.6 under Linux (under NT it works) and try to use raw partitions. About Pmon ORA-601 simply check Metalink.
    I know Oracle, it is my work. I like Oracle database. I think, Linux is the best OS. But i want Oracle to solve current bugs more quickly, for a customers could not say "Oracle on Linux - it ***** ". Because, customers must to know about problems to avoid it. It is a more biger problem, when database is crashed.

  • Checking Raw devices on Linux box

    How i can check raw device configured on Linux box?
    Like System admin configured dev/raw/raw1 and dev/raw/raw2
    how i can check this? With df command i am not seeing this...

    Is it Ok for RAC or not
    [oracle@test1 ~]$ sudo raw -qa
    /dev/raw/raw1: bound to major 8, minor 1
    /dev/raw/raw2: bound to major 8, minor 2
    /dev/raw/raw3: bound to major 8, minor 3
    [oracle@test2 ~]$ sudo raw -qa
    /dev/raw/raw1: bound to major 8, minor 49
    /dev/raw/raw2: bound to major 8, minor 50
    /dev/raw/raw3: bound to major 8, minor 51

  • Iphone 5 does not find any device to pair with

    Hi,
    Have been trying to pair my Polar Heart Rate monitor H7 on the Polar Beat app and it keeps on telling me to enable Bluetooth in the iPhone's settings.
    Bluetooth is on in settings but doesn't find any devices ... not even my Mac
    Any ideas?
    Thanks

    The heart rate monitor needs to be in discoverable mode.

  • I can not find my device (I Pad) when connected to my desktop.

    I am unable to find my device (IPad) in ITunes when when connected.

    Hello Myrtle1234
    Start with the article below to troubleshoot your iPad showing up within iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

Maybe you are looking for