_visible not working on mc

This is completely doing my nut in...
I have 5 movie clips, each on a separate layer with a layer
mask above them all - and I want to hide them. They are all mcs,
all with instance names that can be found with the target finder,
but the _visible property and _alpha properties don't work. My code
is so simple:
sand._visible = false;
But it's not working.... help!
M

Have just realised that, for some reason, masking the mc
prevents it from being made invisible. So the alternative is to
make the mc itself have the mask... although it's a bit of a pain
in the neck alternative! So if anyone has any bright
ideas...

Similar Messages

_visible not working?

I'm trying to set the _visible of a number of movieclips to flase all at once:
the clips are titled: b0, b1, b2, etc.
for (i=0; i<oobb.length; i++) {
_root["b"+i]._visible = false;
trace(_root["b"+i]._visible);
The problem is that the trace confirms that the movieclips' _visible properties have indeed been set to false, but the movieclips remain visible.
How did I get them to actualy become hidden?

there's no code problem as long as your movieclips are on the _root timeline and you're using the correct instance name and there's not other code executing afterwards that's re-assigning their _visible property.

Button not working in Movie Clip

I'm building a small 'table builder' app for a client. This
is my first major project in flash and I've encountered something I
cannot figure out for the life of me.
In the .fla below there's a movie clip 'scroller' it has
buttons in it which load .png's to the main stage. Some of the
buttons work, some don't.... I can't figure out why. Even when I
duplicate a button sometimes it doesn't work.??? If I take a button
that's not working in the movie clip and cut/paste onto the main
timeline it ALWAYS works. I've been pulling my hair out over this
for the last two days . I have even started the whole project from
scratch just to try and find out where I went wrong... but to no
avail..... Any help would be GREATLY appreciated. I'm stuck on a
hump and I need some help to get off of it.
Here's a link to my file. I've stripped away all the styling
elements so it should be pretty clean cut when you see it. Thanks
for any help or guidance!
http://www.buddyscampfire.com/tableBuilder.zip

A few errors: Scene 1 frame 1 Actions layer. You are
referring to buttons inside of the scroller, and you don't have
too. They aren't doing anything. All you need on that frame is:
function startLoading(whichImage) {
loadMovie(whichImage, "imageLoader");
_root.onEnterFrame = function() {
infoLoaded = imageLoader.getBytesLoaded();
infoTotal = imageLoader.getBytesTotal();
percentage = Math.floor(infoLoaded/infoTotal*100);
infoField.text = percentage+"%";
if (percentage>=100) {
delete this.onEnterFrame;
infoField._visible = false;
Then on the Scroller you have that function again. Remove it
from the scroller, as it does nothing there. Inside of the scroller
all you need is code to attach png files from pressing the buttons.
Make sure each button has a unique instance name, which isn't the
case right now. You have like three buttons called imgbtn1. Fix
that.

Preloader in external swf not working

I have several external SWFs that are loaded into my site and
each one has a preloader. When I run them by themselves the
preloader works fine, but when it is embeded into the main SWF the
preloaders do not work. Any ideas?
here is my actionscript -
lBytes = _root.getBytesLoaded();
tBytes = _root.getBytesTotal();
percentLoaded = Math.floor((lBytes/tBytes)*100);
loader.bar._xscale = percentLoaded;
loader.percent.text = percentLoaded + "% of " +
Math.floor(tBytes/1024) + "K loaded.";
if (lBytes>=tBytes && tBytes>0) {
if (count>=12) {
gotoAndPlay("enter");
} else {
count++;
gotoAndPlay("preload");
} else {
gotoAndPlay("preload");
}

I am experiencing the exact same problem on my site -
www.expansiondesign.com
It works in flash player but not when live (tested safari and
firefox)
I don't know if you are using the same script as I am paul.
I execute the following when each image button is pressed:
button1.onRelease = function () {
startLoading("image1.jpg");
which runs this:
function startLoading(whichImage) {
loadMovie(whichImage, "_root.image_holder");
_root.onEnterFrame = function() {
infoLoaded = _root.image_holder.getBytesLoaded();
infoTotal = _root.image_holder.getBytesTotal();
percentage = (infoLoaded/infoTotal*100);
_root.loader._yscale = percentage;
_root.loader._visible = true;
if (percentage>=100) {
delete this.onEnterFrame;
_root.loader._visible = false;
Thanks,
Barton

Statements not working...

Hi there!
Would you please tell me why the _visible statements are not
working in the code below?
Many thanks in advance for your help and suggestions.
Regards
Gerry
[CODE]
//this is to display the cover photo
createEmptyMovieClip("CONTAINER", 1);
CONTAINER._x = 22;
CONTAINER._y = 130;
CONTAINER.loadMovie("Images/cover.jpg");
CONTAINER._visible = true;
//this is to display the verso photo
createEmptyMovieClip("CONTAINERTWO", 2);
CONTAINERTWO._x = 22;
CONTAINERTWO._y = 130;
CONTAINERTWO.loadMovie("Images/verso.jpg");
CONTAINERTWO._visible = false;
[/CODE]

good luck. but i can tell you already, that for best results
with printing, use the printjob (pj) class and after instantiating
a pj instance, create a movieclip that's tailored to your pj's
pageWidth and pageHeight properties and contains exactly what you
want printed, arranged exactly the way you want it to appear on the
printed page.

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Why self-defined access sequences of free goods can not work?

Hi gurus,
I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
when i used the standard access sequences ,it is OK .
Can anybody tell me why?
thanks in advance

Dear Sandy,
Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
Make sure that these fields are flowing in your sales order.
I hope this will help you,
Regards,
Murali.

Adobe bridge raw not working with windows vista in photoshop cc, why?

adobe bridge raw not working in photoshop cc, is there a fix?

Your sure your using photoshop cc on windows vista?
I was under the impression that photoshop cc would not even install on windows vista.
What version of camera raw do you have?
In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
(click on the words Camera Raw to see the version)
Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
What camera are the camera raw files from?
Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Adobe Bridge CS5 in windows 7 not working?

Adobe Bridge CS5 in windows 7 not working. I was using bridge perfectly for last 2 years. It stops working since 3 days. I tried to install updates. Showing some error to install.
Tried to install creative cloud..again some error. Error code : 82
Could you please advice how I can fix my adobe bridge.

https://www.youtube.com/watch?v=xDYpTOoV81Q&feature=youtu.be
please check this video I uploaded..this is what happens when I click adobe bridge.. just blinks and go off. bridge not working on task manager

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

ADOBE CLOUD ON MY DESKTOP WILL NOT WORK. IT LOADS UP BUT NOTHING FILLS THE WINDOW

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Partner application logoff not working

We have a partner application registered with sso with custom login screen. The login works fine. We use the following code to logoff the partner application in logoff.jsp
response.setHeader("Osso-Return-Url", "http://my.oracle.com" );
response.sendError(470, "Oracle SSO");
session.invalidate();
but the logoff is not working properly. It is not invalidating the session and the logout http request is not going from the application server to the sso server.
Are there any additional configurations for SSO logoff.Any help is appreciated.
Thanks

Hi
The WF should also trigger if i add the Partner function in UI.If i change any Attribute the WF triggers but i dont want to change the attribute when i add the partner function.
If i have only one event for WF that is Partner Change the WF will not trigger it for the 1st time when i save the UI. But next i come to the same saved doc and add a partner function then the Wf triggers.
So this means that Partner change is active.
the issue here is i need to trigger the WF on , the 1st time i save the UI, for which i wil be using Attribute Change and next time when i come back to saved doc the and add only the partner function and no changes are made to attributes the WF should again trigger.
Thanks
Tarmeem

IPhone 4 Voice Memos not working/saving

Hi there,
I'm having trouble with my voice memos too. Up until yesterday they were working fine and now, even though the record button works, the stop button does not and I can only pause them. Worse again is that the button to go into the menu to view all voice memos is not working so I can't play them from my iPhone and nothing new is saving to my iTunes. Please help!

I've always had the "Include Voice Memos" option selected. I think that only pertains to syncing voice memos from iTunes to the iPhone after it has been copied to iTunes. It has to be the new OS/iTunes not communicating that new memos have been recorded. For some reason they won't sync when I want them to, and then a few syncs later they magically appear.
By the way, I'm VERY comfortable with the iTunes and iPhone systems. I've been using iTunes for 5 years, and I've been recording class lectures with the iPhone voice memo app (and another app) for a couple years. It's not an error of not seeing that the memos were added; they don't exist in my library or music folders.
JUST OUT OF CURIOSITY, POST WHICH FIRMWARE YOU ARE RUNNING EXACTLY!!!
I'm on an iPhone 4, running firmware 4.0.1

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Ideapad A1-07 tablet wifi-bluetooth does not work!

Hello everyone. As you can see from the title on my tablet is not working wifi and bluetooth. When turning wifi tablet is reset and continues to be off and on until it forcibly turns off, and when you turn it on again, and do not touch wifi everything is normal and there are no problems with resetting. Can someone help me and give suggestion to solve this stupid problem. I'm from Croatia and I'm bad with the English writing.

Hi
Welcome To Lenovo Community
Please perform a factory reset
Please ensure you have backed any important data before doing factory reset
Hold the volume down and the power till Lenovo logo appears .
System will boot into recover mode. Follow the instructions
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Polygonal lasso tool not working with stylus on Surface Pro 2

Hi guys,
I'm new here so please bare with me if I'm posting in the wrong place or don't make immediate sense.
Hardeware / software used: surface pro 2 and I'm running photoshop CS5.
Problem is a fairly basic one: I am trying to make basic selections using the polygonal lasso tool (using the stylus that comes with the tablet) but it simply will not work. All I get when I touch the stylus to the screen is the circle that appears then fades. If I attach the keypad and try using that then it works no problem at all.
Does anyone have any ideas as to whether there is a particular setting that I need to switch on or off e.g. something relating to pressure sensitivity (although not sure why this would affect this particular selection tool)?
I've searched the web and come up with nothing so far so any help is greatly appreciated!
Thanks for your time
Scott

same problem on surface pro 3 !!!!
and i think quite significant, for lot of artists using polygonal lasso a lot (including me). How come that the stupid surface cannot work properly

_visible not working on mc

Similar Messages

Maybe you are looking for