Visible sent message will not open

When I look at my sent mail box for one of my mail accounts. I can find messages from last march. If I click on a particular one mails says "Loading..." and never does anything else. If I click on a message above or below it. Those messages will show up fine. I can see the first two sentences in the preview panel, but the full message never loads.
Mail account is POP and there are no messages on the server's sent mailbox. Naturally with POP I am only using my computer to access it.
Know why?
Thanks,
Mike

Follow the exact path shown in the screenshot.
The AppData folder is hidden by default in Windows.
If you cannot see it, in Windows Explorer click Tools > Folder Options, click the View tab then check the box labelled "Show hidden files, folders and drives"
You can now see the AppData folder and reach the .xml file to delete it.
Next time you launch Dreamweaver, it will recreate the .xml file automatically.

Similar Messages

My sent mail will not open anymore

I have removed a lot of sent messages(8000>3000) and my sent folder will not open anymore.
For a couple of times I opened my Thunderbird but no respons.
The cursor is still turning cirkels.
What can you suggest?
Thanx in advance
Kees

If it is an IMAP account you might have to wait for an update/synchronization of your actions on the server.

My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

My iWeb just crashed and has vanished from my computer. The icon is visible but it will not open. Can anyone help? I desperately need it fixed as its my business website and i was in the process of updating it

Where was this site hosted?
Apple eliminated iWeb in July!!!
http://en.wikipedia.org/wiki/IWeb#Discontinuation_of_iWeb_in_iCloud_Transition
http://www.macworld.com/article/1160728/apple_mobile_me_transition_faq.html

Messages will not open on iOS 7 with iPhone 4

Just upgraded to iOS 7 on an iPhone 4. Is anyone else unable to open the Messages app. Tap and the app comes up as if its going to start to load in my coversations, but then after about 5-10 seconds it just closes.

Hello Rich the Badger,
I would be concerned too if Messages was not opening on my iPhone. I recommend following the steps in this article for an issue like this (steps 1-3 specifically stand out to me for what you described):
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for using Apple Support Communities.
Best,
Sheila M.

"sent audio" will not open

Hi
In FCP, Im trying to fix up some audio. Sent the clip to Soundtrack pro (STP) but STP says error "cannot open render.mov"
any suggestions?
I also tried opening the file directly - eg "open in editor"didn't work
also tried changing the extension to ".wav" which didn't work either.
I also posted this in STP forum - dont know which program is the culprit at this point.
I was able to get it to open as a multitrack project, then changed that to an audio file, but after that, I can only save the file like an orphan - it will not update the section in FCP which means I would have to attempt to match the audio to the video - lypsync frame by frame which never works right.
there must be a simpler way?

If it is an IMAP account you might have to wait for an update/synchronization of your actions on the server.

IMAP Sent messages will not write to server (mail 3.1, imail 9.22 server)

hi, i was waiting for today's update to fix this problem and it did, for about 3 minutes.
when i send messages from other clients including the iphone, sent mail gets written to the server, from mail 3.x it just hangs. the message sends, but the sent mail never goes.
is there ANY WAY to fix this? i cannot believe there is an update for mail and this is still happening.
is it something to do with the server?
thanks so much...

hi, i was waiting for today's update to fix this problem and it did, for about 3 minutes.
when i send messages from other clients including the iphone, sent mail gets written to the server, from mail 3.x it just hangs. the message sends, but the sent mail never goes.
is there ANY WAY to fix this? i cannot believe there is an update for mail and this is still happening.
is it something to do with the server?
thanks so much...

Dreamweaver error message will not open (CS5)

I know this exact question has been asked before, but i still really do not understand. I understand that an XML file needs to be deleted, but I don't know how to get to that XML file or even how to get to the file path that it refers to. I tried uninstalling and reinstalling it but nothing worked.
the bottom picture is what I get after saying ok. Very confused. :/

Follow the exact path shown in the screenshot.
The AppData folder is hidden by default in Windows.
If you cannot see it, in Windows Explorer click Tools > Folder Options, click the View tab then check the box labelled "Show hidden files, folders and drives"
You can now see the AppData folder and reach the .xml file to delete it.
Next time you launch Dreamweaver, it will recreate the .xml file automatically.

Why do Mail messages suddenly not open?

Does anyone else experience trouble opening email messages?

Without knowing anything else about your situation other than your email messages will not open, try this.
Quit the mail app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails, a few more details would help.

Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while

Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while. How can I open my messages?

close all backgrounded apps, and then try,if it crashes again then do a reset all settings

I sent a long message and now imessage will not open?!

I sent a long message and now imessage will not open?!

1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the iMessage app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar

Mail will not open message viewer or drafts

Hello. I work on a 27" IMac 2.66 GHz 8 GB 1067 MHz DDR3, running Mavericks 10.9.5. Since installing the latest update mac mail has been running VERY slowly, even lagging substantially as I type. Then in the last couple of days it has seemingly launched but no windows, no message viewer are visible. I can quit it or force quit or restart the computer but it still will not open any windows. I tried shutting off iCloud mail sharing yesterday and lo and behold it worked again. But today although iCloud mail remains shut off it will not open. I have opened the console and here are the recent messages:
(it seems to suggest I am out of cpu space? of a 1TB SATA disk I have 387.21 GB free of 999.35
Your assistance in fixing this will be greatly appreciated. Thank you.
10/10/14 1:05:51.237 PM WindowServer[190]: disable_update_timeout: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
10/10/14 1:05:51.949 PM com.apple.SecurityServer[14]: Session 100023 created
10/10/14 1:05:52.517 PM Mail[756]: The layout constraints still need update after calling -[MUIAddressField updateConstraints]. MUIAddressField or one of its superclasses may have overridden -updateConstraints without calling super. Or, something may have dirtied layout constraints in the middle of updating them. Both are programming errors.
10/10/14 1:05:52.918 PM WindowServer[190]: common_reenable_update: UI updates were finally reenabled by application "Mail" after 2.68 seconds (server forcibly re-enabled them after 1.00 seconds)
10/10/14 1:08:10.085 PM com.apple.backupd[725]: Found 2371 files (1.23 GB) needing backup
10/10/14 1:08:11.000 PM com.apple.backupd[725]: 2.39 GB required (including padding), 12.71 GB available
10/10/14 1:08:41.000 PM kernel[0]: process Mail[756] thread 27827 caught burning CPU! It used more than 50% CPU (Actual recent usage: 51%) over 180 seconds. thread lifetime cpu usage 90.223218 seconds, (88.660322 user, 1.562896 system) ledger info: balance: 90001796449 credit: 90001796449 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 173696420474
10/10/14 1:08:41.865 PM ReportCrash[779]: Invoking spindump for pid=756 thread=27827 percent_cpu=51 duration=177 because of excessive cpu utilization
10/10/14 1:08:46.717 PM spindump[780]: Saved cpu_resource.spin report for Mail version 7.3 (1878.6) to /Library/Logs/DiagnosticReports/Mail_2014-10-10-130846_Rachael-Millers-iMac.cpu _resource.spin
10/10/14 1:08:53.843 PM com.apple.SecurityServer[14]: Session 100011 created
10/10/14 1:08:53.843 PM com.apple.SecurityServer[14]: Session 100024 created
10/10/14 1:10:04.098 PM com.apple.backupd-helper[59]: Not starting scheduled Time Machine backup: Backup already running
10/10/14 1:12:05.990 PM mdworker[785]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
10/10/14 1:12:05.990 PM mdworker[793]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
10/10/14 1:12:05.990 PM mdworker[792]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
10/10/14 1:12:09.546 PM mdworker[786]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 1. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
10/10/14 1:12:15.637 PM mdworker32[795]: CGSConnectionByID: 0 is not a valid connection ID.
10/10/14 1:12:15.637 PM mdworker32[795]: CGSGetSpaceManagementMode: No connection with id 0x       0
10/10/14 1:12:50.991 PM com.apple.backupd[725]: Copied 2694 items (1.14 GB) from volume Macintosh HD. Linked 11878.
10/10/14 1:13:01.539 PM com.apple.backupd[725]: Will copy (9.2 MB) from Macintosh HD
10/10/14 1:13:01.540 PM com.apple.backupd[725]: Found 106 files (9.2 MB) needing backup
10/10/14 1:13:01.540 PM com.apple.backupd[725]: 928.5 MB required (including padding), 11.46 GB available

Back up all data before proceeding.
1. Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
          Services ▹ Open
from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your administrator login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

CyclPhotoshop Ellments 11 Editor will not open. Also I can edit in quick edit, but when I do, copy of picture is sent to ree bin. I am using Windows 7 ?

Photoshop 11 Editor will not open. Also I can edit in quick edit, but when I do copy of picture is sent to recycle bin. I am using Windows 7

I have solved the problem myself. I noticed when running Task Manager
that I was using a lot of resources (>60% CPU) when running Organizer. I
disabled Auto Analyzer and Face Recognition and all is fine now. I will add
one or the other a little at a time to see which is actually causing the
problem.
In a message dated 9/25/2011 2:18:09 P.M. US Mountain Standard Time,
[email protected] writes:
Re: PSE 9 Editor will not work if Organizer is running - what to do?
created by hatstead (http://forums.adobe.com/people/hatstead) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/3937331#3937331)

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto will not open. Here's the message that I get. Process:         iPhoto [3543] Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier:

I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process:         iPhoto [3543]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         ??? (???)
Build Info:      iPhotoProject-4750000~1
Code Type:       X86 (Native)
Parent Process: launchd [109]
Date/Time:       2011-06-10 21:48:59.821 -0500
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          -4164908 sec
Crashes Since Last Report:           8
Per-App Crashes Since Last Report:   11
Anonymous UUID:                      45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
          /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
          /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000

Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process:         iPhoto [4991]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         ??? (???)
Build Info:      iPhotoProject-6070000~1
Code Type:       X86 (Native)
Parent Process: launchd [142]
Date/Time:       2011-06-13 23:39:38.485 +1200
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          -1643976 sec
Crashes Since Last Report:           35
Per-App Crashes Since Last Report:   12
Anonymous UUID:                      D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
          /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
          /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R   UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture?

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Visible sent message will not open

Similar Messages

Maybe you are looking for