VISIO 2013 has an incorrect error message displayed

When I am exporting a SharePoint 2013 Workflow diagram so that I can use it in SharePoint Designer 2013, I am getting the following error message,
"This doesn't seem to be a SharePoint 2010 Workflow diagram. We can't export the diagram unless it contains SharePoint 2010 Workflow Shapes. Also, we can't export if there are shapes from other workflow versions in diagram".
I have uninstalled and installed a new version of VISIO 2013 professional today to see if this would solve the problem and it did not.
I think the problem might be caused by exporting a SharePoint Designer 2013 workflow with either the visual designer view or text based designer into Visio 2013 professional version. I then exported the same workflow back into SharePoint designer. The original
workflow was created in SharePoint Designer 2013 and not in VISIO pro 2013?
Thus can you tell me what I can do to solve this problem?

I think you have either used a Layout template or used Textboxes/Tables to layout your document.
The T.O.C. will only include material that follows it, as Jerrold has pointed out, and it must be in the main text area between the margins of the document, not in floating objects or inline objects.
Peter

Similar Messages

"Internal error: An unexpected exception has occurred" error message displayed when browsing a cube.

“Internal error: An unexpected exception has occurred“ error message displayed when browsing a cube.
The error behaviour is quite irregular and does not occur for specific condition.
Will cumulative update 9 for SQL Server 2008 R2 (SP1) installation help to fix the issue which is provided on the below link:
(http://support.microsoft.com/kb/2152148)
The current version of SQL Server I am using is as below:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Thanks in advance for the help!

Hi Mon,
The hotfix you said is for Microsoft SQL Server 2008. So it will not work on your scenario since you are using SQL Server 2008 R2.
Based on the limited information, we cannot give you the exact reason that cause this issue. In order to narrow down this issue, you can apply the latest Service Pack and Cumulative Update as GregGalloway said. Besides, you can troubleshoot this issue by
using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

Process error message: Display on the same page

When I create a before header process and that has an error, the error message shows up on a page by itself with the OK button. This takes away the context of the error
Similar to how validations have the option of displaying inline on the same page, is there a way to have the process error message display on the same page?
Thanks

I just want to display the error message on the same page, thats all. I dont want a error page with just the error since it takes away all the context.
Well what do you want to do, you can set a item to
hold a message and display that item in a region
when this_exception then
:P20_ERROR_MESSGE := 'Something went wrong here';So, P20_ERROR_MESSAGE would be a hidden item on the page?
Then display the item in a region.How can I display that hidden item in the region? So the region would just have this read-only text box in it? But then it wont be hidden? I guess I can conditionally display the region only if the error message is not null?

Inconsistent error message display

Using jsf/adf 10.1.3.3. Steve, I'm experiencing what seems to be an inconsistency in the way that error messages are being displayed. The problem I'm experiencing is that the first time an attribute fails validation, the error message is displayed only at the top in the message box and not beneath the respective component. The next time validation fails on this field, I see the error message at the top and beneath the component. This inconsistency seems to appear only when an attribute has been marked as mandatory (not null) and that particlar validation fails. Put another way, if I have a method validation on an attribute and that validation fails, I don't see this inconsistency. The error message always displays both at the top and beneath the component. I've tested this on one of your samples, RequiredFieldsWithCustomRequiredMessageIncludingFieldLabel, and found it happening there also. I made one slight change to the code in that example so that I could recreate this problem. There's code behind the Save button of the CreateNewEmployee.jspx which sends the user back to the 'Home' page of this app if the commit is successful. I've rewired that by returning null instead of returning "back". This way I can recreate the problem. Here are the steps to recreate:
1) Run CreateNewEmployee.jspx
2) Without entering any values, click Save.
3) Validation fails for each of the required attributes, the errors appear for each of these attributes, but only in the top message box.
4) Enter in valid values for the required fields.
5) Click Save. This should commit the record just fine.
6) Null out the value just entered for Employee Name.
7) Click Save. Validation fails for Employee Name and the error message displays both at the top and just beneath the Employee Name input.
I see this behavior without using the customized PageLifecycle class too, so I don't think that it has anything to do with those framework extension classes. Any idea as to why when validation fails the first time for a required attribute the error message does not display beneath that component as well? Thanks.

The only workaround mentioned in the bug report is to use required="#{...}" instead of showrequired="#{...}" That is, if the client side manages the enforcement of the requiredness, then the issue apparently does not occur. The bug is still open (i.e. hasn't yet been fixed in 11g).
I'd recommend you file a Service Request on Metalink and ask for a fix to bug# 5918276 if it's a showstopper issue for you.

Who has the following error message..please look it up...

Hello !
Who has the following error-message when connecting a ipod to the Cinema Display:
Aug 6 12:29:01 G5 kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-244.4.0/AppleFWOHCI.cpp 3435: ERROR: FireWire (OHCI) Apple ID 42 built-in: handleUnrecoverableErrorInt
Please look in the console Application in the file system.log
What does it mean ?
Thanx

It means that the firewire port in your Cinema Display has problems. Read more here: Thomas Berglund, "Problem with 20" Firewire..Who has the following entry ?" #2, 04:45am Aug 20, 2005 CDT

ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. Why?!

For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS. I am using Windows 7 on my 64-bit computer. iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups. It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me". Why can't I sync these photos, and what can I do? Thanks so much for the help, I really appreciate it!

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Huey Pro calibrator- error message display measurement Error

i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7

Adobe reader has stopped working error message after installing reader XI on windows 7

Adobe reader has stopped working error message when loading reader after installing reader XI on windows 7.
Does anybody know why ?

Dear Pat,
Thank you for your reply.
It is Ver. 11.0.06 for Acrobat XI
No, I can't open the Reader at all. The error message box popped up immediately when I run the Reader

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this pro

lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this problem. i can not find ircat ir data etc in the programme files. Thanks

robmac76 wrote:
can you tell me step by step how to recify this problem.
Yes:
Step 1: Delete the preview cache.
That's it!
So, the trick is to find the preview cache.
This document gives location:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
X:\My Catalogs\My Catalog Previews.lrdata
So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
Which OS?
If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
R

Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

Two months ago, I bought a new computer that uses Windows 8. I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason. Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message. I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details. I've tried installing it as an administrator, but got same failed results.
Any help?
Thanks, Mike

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Reg:error messages display in wdabap

hi expert
could you please say what i need to pass the values which are mandatory in this error message coding .can you please share some the documents related to error messages display.
method ONACTIONEXECUTEACTION .
if sy-subrc ne 0 .
get message manager
DATA LO_API_CONTROLLER     TYPE REF TO IF_WD_CONTROLLER.
DATA LO_MESSAGE_MANAGER    TYPE REF TO IF_WD_MESSAGE_MANAGER.
LO_API_CONTROLLER ?= WD_THIS->WD_GET_API( ).
CALL METHOD LO_API_CONTROLLER->GET_MESSAGE_MANAGER
RECEIVING
    MESSAGE_MANAGER = LO_MESSAGE_MANAGER
report message
CALL METHOD LO_MESSAGE_MANAGER->REPORT_ATTRIBUTE_ERROR_MESSAGE
EXPORTING
    MESSAGE_TEXT              = 'THE ENTERED TICID IS NOT AVAILABLE' .
    ELEMENT                   =
   ATTRIBUTE_NAME            =
   PARAMS                    =
   MSG_USER_DATA             =
   IS_PERMANENT              = ABAP_FALSE
   SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CTXT_ELEMENT
   MSG_INDEX                 =
   CANCEL_NAVIGATION         =
   IS_VALIDATION_INDEPENDENT = ABAP_FALSE
   ENABLE_MESSAGE_NAVIGATION =
   VIEW                      =
RECEIVING
   MESSAGE_ID                =
else .
DATA LO_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
LO_COMPONENTCONTROLLER =   WD_THIS->GET_COMPONENTCONTROLLER_CTR( ).
LO_COMPONENTCONTROLLER->GETDATA(
WD_THIS->FIRE_OUTVIEW1_PLG(
endmethod.
endif.
thanks in advance
Deepika
Edited by: deepika_indian on Aug 18, 2010 7:32 AM

Hi Deepika,
Here for the method REPORT_ATTRIBUTE_ERROR_MESSAGE, mandotory fields are
MESSAGE_TEXT
ELEMENT
ATTRIBUTE_NAME
Here ELEMENT v need to pass lv_el_context type ref of IF_WD_CONTEXT_ELEMENT.(Context Elemet Reference).
Suppose your context having an attribute 'KUNNR'.
So, here v need to pass in the below manner to raise an exception
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->Element_context.
    DATA lv_gr2_visible TYPE wd_this->Element_context-kunnr.
*   get message manager
data lo_api_controller     type ref to if_wd_controller.
data lo_message_manager    type ref to if_wd_message_manager.
lo_api_controller ?= wd_This->Wd_Get_Api( ).
CALL METHOD lo_api_controller->GET_MESSAGE_MANAGER
    RECEIVING
      MESSAGE_MANAGER = lo_message_manager
*   report message
CALL METHOD lo_message_manager->REPORT_ATTRIBUTE_ERROR_MESSAGE
    EXPORTING
      MESSAGE_TEXT              = 'MESSAGE TEXT TO DISPLAY'
      ELEMENT                          = lo_el_context
      ATTRIBUTE_NAME           = 'KUNNR'
*      PARAMS                    =
*      MSG_USER_DATA             =
*      IS_PERMANENT              = ABAP_FALSE
*      SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CTXT_ELEMENT
*      MSG_INDEX                 =
*      CANCEL_NAVIGATION         =
*      IS_VALIDATION_INDEPENDENT = ABAP_FALSE
*      ENABLE_MESSAGE_NAVIGATION =
*      VIEW                      =
*    RECEIVING
*      MESSAGE_ID                =      .
Kindly revert for further clarification.
Regards,
Amarnath S

Error Message Displayed while executing FNDLOAD Command in windows machine

Hi,
I am getting the following error message while executing the FNDLOAD Command in Windows Machine. Can any one give some clarifications to solve this issue.
FNDLOAD Command Used:*
+./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO
Error message Displayed for above command:_
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator
Let me know the solution this issue
Regards
Arif Mohammed

Hi Hussein,
Thanks for your response, Let me explain in detail that the error I am facing while running FNDLOAD Command.
I have executed the below command in CYGWIN which results in error while calling FNDLOAD.
*$ java oracle.apps.xdo.oa.util.XDOLoader DOWNLOAD -DB_USERNAME apps -DB_PASSWORD apps -JDBC_CONNECTION 16.89.26.52:1521:OA10 -LOB_TYPE TEMPLATE -APPS_SHORT_NAME PO -LCT_FILE $XDO_TOP/patch/115/import/xdotmpl.lct -LANGUAGE en -TERRITORY US -LOG_FILE SHW.log;*
I got the below error message while executed the above command (Highlighted in BOLD):
$ cat SHW.log
XDOLoader started: Tue Nov 15 20:27:18 PST 2011
Parameters passed to XDOLoader...
[TERRITORY] [US]
[DB_USERNAME] [apps]
[LCT_FILE] [C:\oracle\vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct]
[DOWNLOAD] [DOWNLOAD]
[JDBC_CONNECTION] [16.89.26.52:1521:OA10]
[LANGUAGE] [en]
[DB_PASSWORD] [apps]
[LOB_TYPE] [TEMPLATE]
[LOG_FILE] [SHW.log]
[APPS_SHORT_NAME] [PO]
Start downloading...
Downloading files from XDO_LOBS: SELECT FILE_DATA, LOB_CODE, LOB_TYPE, APPLICATI
ON_SHORT_NAME, FILE_NAME, LANGUAGE, TERRITORY, XDO_FILE_TYPE FROM XDO_LOBS WHERE
APPLICATION_SHORT_NAME = :APPS_SHORT_NAME AND LOB_TYPE in (:TEMPLATE, :TEMPLAT
E_SOURCE) AND LANGUAGE = :LANGUAGE AND TERRITORY = :TERRITORY
Downloading files from XDO_LOBS: SELECT L.FILE_DATA FILE_DATA, B.TEMPLATE_CODE L
OB_CODE, L.LOB_TYPE LOB_TYPE, L.FILE_NAME FILE_NAME, L.LANGUAGE LANGUAGE, L.TERR
ITORY TERRITORY, L.XDO_FILE_TYPE XDO_FILE_TYPE, L.APPLICATION_SHORT_NAME APPLICA
TION_SHORT_NAME FROM XDO_TEMPLATES_B B, XDO_LOBS L WHERE B.APPLICATION_SHORT_NAM
E = :APPS_SHORT_NAME AND B.TEMPLATE_CODE = L.LOB_CODE
Generating LDT file: xdotmpl.ldt
Calling FNDLOAD: FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD C:\oracle\
vis10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS
APPLICATION_SHORT_NAME=PO
APP-FND-01564: ORACLE error 6401 in AFPCOA
Cause: AFPCOA failed due to ORA-06401: NETCMN: invalid driver designator.
The SQL statement being executed at the time of the error was: and was executed
from the file .
Generating DRVX file: xdotmpl.drvx
XDOLoader done successfully: Tue Nov 15 20:27:30 PST 2011
$
So i decided to run the FNDLOAD Command alone in CYGWIN which is highlighted and still im facing the same issue but if i run the below command it works fine and getting download.
*./FNDLOAD apps/[email protected]:1521:OA10 0 Y DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME=PO*
Hope you understand the problem which im facing. Let me know some solutions from your side to solve this issue.
Regards,
Arif Mohammed

'Elements 11 Organizer has stopped working' Error Message

I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button. I have been putting up with this but now I cannot do a backup due to this problem.

darryl351 wrote:
I recently upgraded from Photoshop Elements 10 to 11. Everything works great while I am using it but if I do not do anthing in Elements for 4-5 minutes I get the 'Elements 11 Organizer has stopped working' error message, the only option I have is to push the 'Close Program' button. I have been putting up with this but now I cannot do a backup due to this problem.
Hi, I've just noticed that you too were having problems with elements 11, do you have RoboForm running also on your pc? if yes, try switching it off and see how you go! if it now works close elements, go to RoboForm\options\application integration\ then add Photoshop elements application to the list. Elements and RoboForm clash for some reason. Hope this helps

VISIO 2013 has an incorrect error message displayed

Similar Messages

Maybe you are looking for