Visio Professional 2007
I had Visio Professional 2007 on my previous computer which went dead. I now need to put this on my current computer but can't find a source to download the software. Please tell me how to do this. Thank you.
Hi,
Please get the backup installation copy here:
http://office.microsoft.com/en-us/products/download-back-up-restore-microsoft-office-products-FX103427465.aspx
Regards,
George Zhao
TechNet Community Support
Similar Messages
-
Visio professional 2013 cant install because office product key does not match
Settings: office 2007 on windows 7
I'm the IT manager for a small consulting company. We use the full microsoft stack - all paid for.
When one of the consultants needed visio we went along and bought an digital version of it.
We installed it and all was nice and dandy.
The consultant left the company, we decommissioned the visio product from his laptop which was then recomissioned to a new employee without the visio.
Another consultant is now in need of visio. When trying to install visio according to the instructions we are asked to activate the office account on this specific laptop.
We then get a message that this office Product key is activated through another Microsoft account please log out and log in with that account?
We are using the exact same procedure as when installing the visio the first time (the visio sw is not installed or used on any other machine).
We have a multi license (volume) windows and office agreement with product keys.
AND WE ARE STUCK - SPENDING MORE TIME ON THIS THAN IT WOULD ACTUALLY COST US TO BUY ANOTHER Visio license!
I've used Microsoft / windows / office throughout my career but this just is not professional!
Please help – To me this is not a support issue that I should spend support money on. We have purchased all products and we cannot get it to work.Hi,
From your description, you had a digital version of Visio professional 2013, it was a retail version. Please give me the whole error message when you
activate Visio.
As far as I know, we need to uninstall Visio professional 2013 online( keep connection with internet),then we could re-install and activate it. If you uninstall
it from consultant' laptop offline, it'll store the product key in the laptop.
I recommend you activate a Microsoft product by using Microsoft Product Activation Center
http://support.microsoft.com/kb/950929/en-us
Regards,
George Zhao
TechNet Community Support -
Attempting to load Trial version of Microsoft Visio Professional 2013 (64 bit version) to laptop - (system type: 64 bit operating system).
Office 365 Home Premium
Successfully downloaded Visio Trial and burned to disc - when attempting to run and install message :
"Setup Error:
We can't install the 64-bit version of Office because we found the following 32-bit programs on your PC:
Office 15 Click-to-Run Extensibility Component
Please uninstall all 32-bit Office Programs, then retry installing 64-bt Office. If you want to install 32-bit Office instated, please run the 32-bit setup."
Have viewed program files:
- there is no file "Office 15 Click-to-run Extensibility Component" to remove.
- there are no 32 bit files to remove.
What do I need to do to install Visio Trail?
ThanksHi,
Which Office 365 Home Premium editions did you install? 32bit or 64bit? Office 2013 doesn’t support running side-by-side installations of 64-bit and 32-bit versions of Office. For example, you can’t install Office 2010 32-bit side-by-side with Visio
2013 64-bit. This applies to both Windows Installer (MSI) and Click-to-Run installations of Office 2013. If you try to do this, you'll receive the error message and be prevented from continuing:
http://office.microsoft.com/en-us/access-help/why-cant-i-install-both-the-32-bit-and-64-bit-versions-of-office-2013-HA103523746.aspx
To resolve your issue you can install Office 365 Home Premium 64 bit + Visio Professional 2013 64 bit version.
More reference:
How to choose to Office 365 Home Premium 64 bit:
http://howto.cnet.com/8301-11310_39-57567050-285/how-to-install-the-64-bit-version-of-office-365/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Get started quickly with the Visio 2013 trial
http://blogs.office.com/2013/10/07/get-started-quickly-with-the-visio-2013-trial/
Here is a similar issue, we also could refer to:
http://social.technet.microsoft.com/Forums/en-US/5e77322d-268b-47c2-a0ea-346891fd8559/cant-install-visio?forum=visiogeneral
Regards,
George Zhao
TechNet Community Support -
Trying to install Visio Professional 2013 on 64 bit machine but install says I have 32 bit office
I am Trying to install Visio Professional 2013 on 64 bit machine but when I try to install it says I have 32 bit office already installed. How do I know if I have 32 bit Office installed, and if so how do I change it to 64 bit.
And how do I install 64 bit Visio ?I believe for most users the 32-bit version of Office is recommended due to compatibility issues (see http://office.microsoft.com/en-us/word-help/choose-the-32-bit-or-64-bit-version-of-office-HA010369476.aspx) so that is likely the version you have.
If you only have the install media for 64-bit Visio then you may want to see what you can do to exchange it for 32-bit if possible - the only option for creating a 64-bit version of Office is to uninstall the 32-bit and install 64-bit separately.
(You can tell quickly if your current Office is 32- or 64-bit by looking at the directory it is installed in - 64-bit programs get installed in "c:\Program Files" while 32-bit programs get installed in "c:\Program Files (x86)"
Good luck! -
Downloading and Installing Office Professional 2007 in Boot Camp
I purchased an electronic download of Office Professional 2007; however, I cannot locate any source in Boot Camp to use in order to open the application. Any help out there? I really appreciate it.
Do you know what the file extension is?
I don't know much, but I'm thinking it might be an .iso file (when I downloaded the office 2010 beta it was one). If you have an iso file then you need a special disk-burning program like Nero (in Mac you can use Disk Utility although I have heard it is unreliable) to burn it to a cd or dvd, and then install the program from the cd.
If it's not an .iso file then most likely I can't help you. -
Unable to use 'Visio Professional 2003' with 'SAP MDM Data Manager 7.1'
Hello,
I'm currently working with MDM 7.1, and I installed 'Visio Professional 2003 SP2' to build my workflows.
The problem is that:
(1)- As the third pane ('Step Properties') did not appear in Visio when I drag & dropped icons => I executed 'Data Manager' help procedure (p. 301 / 302); cf.: help.sap.com : configuration of file paths in Visio, via 'Tools'>'Options''Advanced', etc.
(2)- After these steps, when I launched Visio again in Data Manager, my menu bar had disappeared in Visio, and I couldn't save my workflow, even with the 'Save' icon.
Does somebody know, or understand, what's happening, please?
Thx a lot for any help,
remiHi,
As you have already installed MS-VISIO 2003.
Did you install Install Workflow Engine i.e. WorkflowInstall_Ver setup ?
If not please install it and then restart your machine.
Also, Note: Microsoft office Visio 2003 should be Standard edition.
Kindly update if you are still facing any issue..
Thanks and Regards,
Mandeep Saini -
Hi all:
I'm using MS Project Professional 2007 and I created the schedule as an .mpp file and assigned resources before I loaded the schedule to the EPM server. I created the resource names consistently with the names in the Enterprise resource pool and when I go into
tools / assign resources and filter on enterprise resources, I see the resources I assigned to my project associated with the correct tasks. The only problem is that when these resources go into PWA, they can't see their assigned tasks even after I save and
publish the project. If I create a new resource assignment while I am connected to the server, then the resource can see the new assignment, but I don't want to have to completely recreate the project assignments to remedy this situation. Can anyone tell me
another way to fix it so that resources begin to see their assignments in PWA and can enter their time there?
Any suggestions would be greatly appreciated.
Thanks,
DavidHey Dale. Published = Yes on all tasks. That's not it.
But you definitely hit the mark on Assignment Owner. That must be where the problem is. When I read that I remembered that when I go into PWA all the project tasks show up under My Tasks, which seemed wrong to me and I asked the administrator
about that. he told me it was because I was the project owner. Now I know that was not a correct response on his part and I'll point it out to him.
I did check the Resources and Assignment Owner was blank. I tried to set it to be the Resource and it's a locked field. I can't do it. It doesn't surprise me that this field is locked because I suspect the administrator controls the
Enterprise Resource pool. But what does it tell you that this field is blank. Since I'm getting the tasks in my My Task list, I expected to find my name there.
Anything else I should check?
Anything I should tell the admin about how to make the Resources the owners of their own tasks. I assume that should be the default. That can be corrected just as easily in the Resource Sheet View as in the Resource Usage view, I assume
-- is that correct?
Thanks again for helping me figure out what the problem is.
David -
Activate full version of Visio Professional 2013 from Trial with Product key
Is it possible to activate the full version of Visio Professional 2013 with the trial version of the software? I have an extra product key for the full version but no DVD. Thanks
Hi,
As far as I know, the trial version can not to use as the full version of Visio Professional 2013.
You need to uninstall the trial version, then download the full version of Visio Professional 2013.
Download Link:
http://technet.microsoft.com/en-us/evalcenter/hh973399.aspx
http://support.microsoft.com/ph/937/en-us -
Visio Professional 2013, 64 bit, will not save to directory
I've been trying to save the Visio Professional 2013 (60 day trail) but am not able to do so irrespective of the directory I try to save it in (file name: VisioProfessional_x64_en-us). It just keeps sending me back to "retry" and "cancel"
and doesn't allow me an opportunity to run it. In looking at the threads here, it seems like I would have to change to a 32 bit system to get this to work. Why then does the site ask if I have a 32 or 64 bit system. Not a good way to start
a trail. Thanks, any help would be appreciated...WCG.Try to download Visio Professional 2013 trial version from the following link:
http://technet.microsoft.com/en-US/evalcenter/hh973399?WT%2Eintid1=ODC%5FENUS%5FFX103791368%5FXT104000916
Let Akamai downloader management to control the save directory. Check this thread with the similar topic.
http://social.technet.microsoft.com/Forums/en-US/354a5369-70a4-480d-b6fd-1fc464112b68/visio-trial-download?forum=visiogeneral
Tony Chen
TechNet Community Support -
Visio Professional 2013 trial - can't save work
I can't save the work I do when using the trial version of Visio Professional 2013 - is it because it is a trial version?
Hi,
Have you tried to repair Visio 2013 from Control Panel > Programs and Features
Does it happen in recent or it began from the day of Visio 2013 installation?
It the former, please think about what's the application/update installed in the recent past days, and try to remove the suspecious one to check if the save function would be recovery.
We may also create a new local user account with Administrator permission and test the behavior in that user profile.
Regards,
George Zhao
TechNet Community Support -
Free download Visio Professional 2013
I've tried to download the free trial version of Visio Professional 2013 from the office.microsoft.com website twice now and everything goes fine, filling in the forms, the download. Once the download is completed I get a Nero program. Please advise -thank
you.Hi,
The trial of Visio 2013 is available to be downloaded in .img format. Before you install Visio, confirm the version of Windows you are using. If you are using Windows 8, then Windows 8 will automatically install Visio using the .img file. If you are
using a different operating system, a few additional steps are required before starting to install Visio. Here are some options:
Mount the image as an ISO virtual drive. There are popular tools such as
Virtual Magic Disk to mount ISO/IMG disk image file as virtual CD-ROM drive and then install from the ISO file.
Extract .img. You can extract the .img into a directory using any tools that unzip the .img format (e.g.,
7-zip) and then install from it.
Create a disc. Write the .img onto a CD and then install Visio from the CD.
For more detail information, please refer to the following link:
http://blogs.office.com/2013/10/07/get-started-quickly-with-the-visio-2013-trial/
Regards,
George Zhao
TechNet Community Support -
Visio Professional download not working
I downloaded Visio Professional and when I click on the file to complete the download process it is asking me to insert a disk to burn? Why would I need to burn a disk I want to download to my computer. This also happened when I downloaded Project
professional.
Please assist.Hi,
The Visio and Project is available to be downloaded in .img format. Before you install Visio, confirm the version of Windows you are using. If you are using Windows 8, then Windows 8 will automatically install Visio using the .img file. If
you are using a different operating system, a few additional steps are required before starting to install Visio. Here are some options:
Mount the image as an ISO virtual drive. There are popular tools such as
Virtual Magic Disk to mount ISO/IMG disk image file as virtual CD-ROM drive and then install from the ISO file.
Extract .img. You can extract the .img into a directory using any tools that unzip the .img format (e.g.,
7-zip) and then install from it.
Regards,
George Zhao
TechNet Community Support -
As we know, Visio 2013 has three versions: Visio Standard 2013, Visio Professional 2013 and Visio Pro for Office 365.
Visio Standard 2013:
Easily create versatile diagrams using a rich set of new and updated shapes and stencils.
Visio Professional 2013:
Work as a team to easily create and share professional diagrams that simplify complex information.
Visio Pro for Office 365:
Take advantage of all features in Visio Professional 2013 as an always up-to-date subscription from Office 365.
In my opinion, the biggest difference is business requirements which included product price and EULA. For the price, we could confirm the details from Microsoft store or local provider. In this article, we would
only summarize the templates among the different versions. You also refer to the build-in template tables for better understanding.Visio 2013 template list (Part 2):
Item
Template name
Visio 2013 Std
Visio 2013 Pro
MAP
Web Site Map
×
√
Value Stream MAP
×
√
Directional Map
√
√
Directional Map 3D
√
√
Site Plan
×
√
Floor Plans
Floor Plan
×
√
Electrical and Telecom Plan
×
√
Office layout
√
√
Home Plan
×
√
Space Plan
×
√
Site Plan
×
√
HVAC Plan
×
√
Plumbing and Piping Plan
×
√
Reflected Ceiling Plan
×
√
Security and Access Plan
×
√
Plant layout
×
√
HVAC control logic Diagram
×
√
Network
Basic Network Diagram 3D
×
√
Basic Network Diagram
×
√
Detailed Network Diagram
×
√
Detailed Network Diagram 3D
×
√
Rack Diagram
×
√
SDL Diagram
×
√
LDAP Directory
×
√
Active Directory
×
√
Software:
Wireframe Diagram
×
√
UML Activity
×
√
Chen’s Database Notation
×
√
UML Sequence
×
√
UML State Machine
×
√
UML Class
×
√
UML use case
×
√
IDEF1X Database Notation
×
√
UML Database Notation
×
√
Data Flow Model Diagram
×
√
Com and OlE
×
√
Enterprise Application
×
√
Program Structure
×
√
Conceptual Web Site
×
√
Data Flow Diagram
×
√
Crow’s foot Database Notation
×
√
Schedule:
Patient medical process
√
√
Calendar
√
√
PERT Chart
√
√
Gantt Chart
√
√
Timeline
√
√ -
Visio Professional 2010 on Windows 8
Can I install Visio Professional 2010 on a Windows 8 machine? Is there a patch or anything I need to do after installation to make Visio compatible?
yes it will work perfectly fine on Windows 8.. Go ahead and install it..
Ajo Abraham ----------------------------- Knowledge is Power -
Cannot open a single project after disabling support for project professional 2007
We use SharePoint/Project Server 2010. I have a single project on the Project Server (PS) that fails to open in Project Professional (PP). The project is editable in PWA, but PP closes it as soon as it opens it (ie that's what the status window is
displaying, I basically get a blank screen in PP after "opening" the project, and when closing it does not have anything to save/check in). The only recent change I made was disable PP 2007 support. I reviewed several posts so here are
some thoughts: I am currently not using backups, so cannot restore, the server name is already in the trusted list. Any way to retrieve this project from the server (or directly from DB)?Hi Wwodzien,
It might be because of duplicate RES_OPTINDX values. Please install following KB and check the behaviour.
http://support.microsoft.com/kb/2687386/en-us
Note:- I would suggest you to test this in a test environment first.
Happy troubleshooting....
Vikram Daruru - MSFT
Maybe you are looking for
-
SAP CRM 7.0 Print Preview Functionality.
Hi, We are using the SAP CRM 7.0 system. But i am not able to get the functionality of print preview (webclient) whenever i am trying to print a Application Form that uses an SAPscript. Can any one please help me on this issue. It seems the system ge
-
IMSS Min Normalized Measure not appearing in imsmanifest.xml file
Hello, The IMSS Min Normalized Measure line is not appearing in my imsmanifest.xml file. It used to, but since I upgraded to Captivate 5.5, I don't see it anymore. I have thoroughly checked my settings: Reporting is enabled SCORM 2004/Manifest/Defaul
-
Paid for membership. Can't use Develop Module in LR5
I recently paid for the $9.99 monthly plan. I received an email confirming so and have been charged on my bank statement. When I try to use the Develop module in Lightroom 5, a message appears saying it is disabled and that I need to renew my members
-
IPhoto does not appear on desktop, only in Dashboard mode
Hey guys, Has anyone had this problem - the iPhoto window does not appear on the desktop, and can only be seen in Dashboard mode. Once that tiny window in the Dashboard mode is clicked, the program hides. I hope to hear from someone soon about this.
-
BAPI_INQUIRY_CREATEFROMDATA2
Hi, It will be really helpful if someone can tell me in which field/structure I have to pass on the ship-to-party, sold-to-party in the BAPI_INQUIRY_CREATEFROMDATA2? Thanks.. Swetha.