Visio stencil for ace module
I've been searching but i can't find the visio stencil for the ACE-10 or ACE-20 module.
Can anyone point me in the right direction or is this stencil yet to be made ?
I don't think they are available yet. I needed them a few months ago, couldn't find them, and ended up making my own.
In case you need it, here's a link to the stencils Cisco provides.
http://www.cisco.com/en/US/products/prod_visio_icon_list.html
Similar Messages
-
Cisco Visio Stencils for newer modules
I have been trying to find stencils for 6500 modules released in the last couple of years, and have had very limited success. I need stencils for WS-X6748 modules, WS-X6724 modules, WS-X6848 modules, WS-X6816-2T modules and SUP-2T modules, as well as the NAM3.
If anyone can tell me where these can be found, it will be greatly appreciated.Hi,
Most of what you listed are on the latest Switches-Catalyst 6500 located on the Visio download page:
http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
The WS-X6748 and WS-X6724 modules are not in that file. I will ask the product group if they will approve production of those items.
Regards,
Brett Newman
Cisco Visio Production
Visimation Inc.
www.shapesource.com -
Unable to find visio stencil for 6506-E FourX Adapter
Hi
Where can i find the visio stencil for Cisco 6506-E FourX Adapter for 10 Gigabit Ethernet Mode. I found the WS-X6904-40G-2T module but I unable to find the FourX 10G Adapter for it.
Thanks in advance,
Martin JohnHi,
I was also getting same error, which is solved now.
For reference following is what we need to check.
- Proper mapping of source data to endeca dimension is made.
- You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
HTH
MS -
Visio Stencil for HWIC-1GE-SFP
Does anyone know if there is a visio stencil for the HWIC-1GE-SFP for a 2951 router? I have looked through the index of stencils, but it is not listed there. Any suggestions would be appreciated. Thanks!
GilHi Bruno,
I have just emailed the product group to request funding for the following:
EHWIC-4ESG
EHWIC-4ESG-P
EHWIC-D-8ESG
EHWIC-D-8ESG-
EHWIC-4SHDSL-EA
EHWIC-1GE-SFP-CU
Those are all of the EHWIC module part numbers that I could find. We are dependent upon the product groups to authorize and fund the Visio work and hopefully I will hear from them soon.
Regards,
Brett Newman
Cisco Visio Production
Visimation Inc.
www.shapesource.com -
I want to download Visio Stencils for ADF Faces
Dear members
I read about Visio Stencils for ADF Faces and I really Like it.
https://blogs.oracle.com/jdeveloperpm/entry/adf_faces_stencils_for_visio_available_on_samplecode
And I want to download it. Has any one tried it before.Can any one tell me where can I download it.
The articular says that it is Available through samplecode.oracle.com but i cannot find it
please help
thankshttp://www.oracle.com/technetwork/indexes/samplecode/jdeveloper-adf-sample-522118.html
Still down to http://download.oracle.com/otn/samplecode/ADF_Faces_Stencils_for_Visio.zip
you need to accept the license before download.
Timo -
Visio stencil for ASA 5585-X?
Hello,
Can anybody help pointing me to where I can get a visio stencil for a asa-5585-x.
I really appreciate it.
Thanks,
JohnHi John,
The official Cisco Visio stencils can be found here:
http://www.cisco.com/en/US/partner/products/hw/prod_cat_visios.html
I don't see the 5585 there yet, but once it's available that set should be updated.
-Mike -
Hi
Would it be possible to update the Visio stencils for the Unified Computing System. There are a number of servers missing as the stencil hasn't been updated since 2012, one in particular is missing and that's the C240M3 LFF chassis. Also there is no option for disks etc
Many thanks
MikeI too am looking for stencils. Even the Voice_IP_phone stencil is
missing all the new series phones, such as the 69xx, 89xx and 99xx models.
Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore? -
Visio Stencils for Cisco Equipment
Does anyone know where you can obtain some good visio stencils for cisco equipment like routers, switches, gateways, cables, ports, etc. The default ones in Visio leave much to be desired. Any input appreciated - thanks.
I too am looking for stencils. Even the Voice_IP_phone stencil is
missing all the new series phones, such as the 69xx, 89xx and 99xx models.
Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore? -
Does anyone have current Visio stencils for the newer wireless products?
Does anyone have the latest Visio stencils for Cisco's wireless products? Specifically looking for 3502 and 1260 series access points and the 5508 series controllers.
Thanks in advance!Cisco does not seem to have an official stencil for the 5508. However I found this link and it seems to have 5508 stencils:
http://www.4shared.com/file/m_dueG18/Cisco-WLC-5508.html -
I need a visio stencil for the 3500XL series switches. I've found the ones offered on the cisco site for 3500 series switches but they are only for the 3550 switches. Can anyone point me in the right direction or happen to have the old 3500XL stencils??
They are similar ... but not the same. I've heard there are older stencils for the 3500XL out there but can't seem to track it down.
-
[UDP fast age support for ACE Module]
Hello,
I'm testing 2 ACE modules running A3.0.0 for DNS load balancing (UDP). We're testing this by using a DNS query generator that (always) seems to use the same UDP source port when originating these queries. At the moment, the ACE module is hardly doing any load-balancing.
It looks to me like, that because of this, the ACE believes it's the same session (connection) and doesn't really load-balance, so I started looking for a solution and found the fast-age udp feature. But, it seems this is not supported on my ACE modules. Can any one offer another solution and/or look at my config and see if there is another way to achieve load balancing in a testing environment when using a tool like the one I described?
(I put it that way because i believe in real life since queries come from different IP addresses and randomized udp ports, the ACE module will be just fine).
Thanks in advance!
c.Hi Carlos,
Correct. The 3.0(0) is really misleading. You need to start with the "A" - so you really have 1.6.3a installed.
The "show version" for V2 is slightly better -
system: Version A2(1.2) [build 3.0(0)A2(1.2)
Cathy -
Inventory collection fails for ACE module (RME 4.3.1)
I am trying to collect the inventory and ultimately the configurations for my ace modules. When i try to do an inventory collection I get the error
Device sensed, but collection failed
Anybody have any ideas?
ChrisPost your IC_Server.log.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com -
Where are the latest VISIO stencils for logical network device icons
I want to use the same icons commonly used in the Cisco white paper documentation. Where is the stencil for VISIO?
Microsoft provided many Visio Stencils at Visio websites, however, if you want to create your own Visio Stencils you can create it in Visio 2010 in the following way
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1. On the File menu, point to Shapes, and then click New Stencil.
2. To save the stencil, right-click the stencil title bar, and then click Save.
3. Type a name for your stencil, and then click Save.. -
Does ACS for Windows 3.3 support AAA for the ACE module?
I don't think that is correct. I am still
having issues with ACE and ACS. See below:
ACE version Software
loader: Version 0.95
system: Version A1(7b) [build 3.0(0)A1(7b)
Cisco ACS version 4.0.1
I am trying to authenticate admin users with AAA authentication for ACE management.
This is what I've done:
ACE-lab/Admin(config)# tacacs-server host 192.168.3.10 key 123456 port 49
warning: numeric key will not be encrypted
ACE-lab/Admin(config)# aaa group server tacacs+ cciesec
ACE-lab/Admin(config-tacacs+)# server ?
TACACS+ server name
ACE-lab/Admin(config-tacacs+)# server 192.168.3.10
can not find the TACACS+ server
specified TACACS+ server not found, please configure it using tacacs-server host ... and then retry
ACE-lab/Admin(config-tacacs+)# -
New Visio Stencils for Catalyst 3750, Telepresence 1300
In response to customer requests, there are new images on the Visio Stencils web page at http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
The updates include images for:
ASA 5510 Rear
ASA 5520 Front
ASA 5520 Rear
ASA 5540 Front
ASA 5540 Rear
ASA 5580 Front
ASA 5580 Rear
ME-C6524GT-8S Front
ME-C6524GT-8S Rear
ME-C6524GS-8S Front
ME-C6524GS-8S Rear
PWR-400W-AC - 400W AC
PWR-400W-DC - 400W DC
Catalyst 3750 Metro Front
Catalyst 3750 Metro Rear
PWR-ME3750-AC
PWR-ME3750-DC
CTS-1300-47
CTS-1300-65Hi Kevin,
We updated the 3750 on 2/23/12 and the CRS on 2/20/12. Please check the download page.
Regards,
Brett Newman
Cisco Visio Development
Visimation Inc.
Maybe you are looking for
-
Since Labview ver 8.0 and later, I am not very happy with the new way the project installer is managing the additional drivers such as Serial. With LV 7.11 the serial components was included in the cab file and was installed on the target computer in
-
Send to One note or print to one note not working...
print to onenote or send to one note is no longer working.... i have unistalled and re installed microsoft.... any one know how to resolve this issue? thanks :)
-
Syncing audio to clips after making the cuts -Adobe premiere pro cs 5.5
Hello Everyone, I am using adobe premeire pro cs 5.5. I have adobe prodution premium suite. I have completed my cuts with a bunch of clips in each sequence. None of them had audio, so I made all the cuts without the audio. Now I have got all the same
-
2.1.1 is synching correctly now.
Since version 2.0.1, I have had terrble problems with the Podcasts app. I had tried 2.1.1 and still had the same problems. I was not able to get my iPhone to synch with iTunes my computer over USB. I have limited bandwidth and found that it was the o
-
Does 785GM-E51 DVI support dual link?
I am considering buying the 785GM-E51 motherboard which comes with a DVI port (as well as HDMI and VGA of course). Will the DVI support dual link? If so, what is the maximum resolution I could have on the two monitors (say, at 60 Hz with high colour