Vision Acquisition Express vi stopped working

Hi everyone,
The Vision Acquisition Express vi always worked perfectly on my pc, but suddenly, he stopped working today (I can drop it on the block diagram,but there is no pop-up or something,
I tried the following:
- restart pc (didn't help)
- try other express vi's (including other vision express vi) (worked fine)
- convert it to normal vi (empty vi as result)
- open properties with rightmouseclick (didn't help)
- open an example en doubleclick and rightmouseclick properties (didn't help)
Anyone an idea??
Best Regards,
Henk
Solved!
Go to Solution.

Hi Henk_kempen,
This is really weird. Do you know what has happened to the VI/PC before this happen?
There are some troubleshooting you can try.
1. This problem really close to DAQ assistant issue in this white paper. You might try the method in the link below to see if this solve your problem.
http://digital.ni.com/public.nsf/allkb/5CD79190713D2B558625765F007FCC99
2. Repair the software is another option. It worked in many cases. 
3. I try to avoid this but reinstall the software may help in your case.
Best regards,
TuiTui

Similar Messages

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • Airport Express has stopped working, no IP-adress

    Airport Express has stopped working. In my Airport tool, I can't see the Airport Express anymore.
    Under network, I can still see the Airport, but it says, that it cant find an IP-Adress.
    It can see my Airport Extreme.
    Thanks in advance.
    Best
    Clintcool1968

    Try resetting the Airport Express.
    If you don't see it in Airport Utility in your Utilities folder, then you would need to reset it...
    Do you have it set to "Join" the Extreme network? or something else?
    See this Apple doc on how to reset your base station.
    http://support.apple.com/kb/HT3728
    Also, you would not see it in your Network preference panel in the System Preferences.
    You will only see the main network which is your Airport Extreme....
    Unless you have 2 separate networks....
    How many do you have?

  • Saving Images Using Vision Acquisition Express

    I'm trying to save an Image as a jpg using Vision Acquisition Express. My code looks like this. I am able to view the images and scroll through them afterwards, but when I add the file saving portion, I get an error that says "Error 1074395995 occured at IMAQ WriteBMPFile File not found."
    How should I go about Fixing this? 
    Also, when i was running this before, I was getting a memory error and I couldn't figure out how to clear the memory. I was only able to fix this by scraping my previous script and starting over. I haven't gotten this error so far.
    Attachments:
    TakingImages.vi ‏156 KB

    Hi,
    The error you are getting indicates that the file path is invalid.  I just set the file path to my desktop and I could save the files.  I would double check to make sure the path you specified is valid for the computer you are running it on.
    As far as the memory error, it is really hard to say what the cause is.  If you aren't getting it anymore then I wouldn't be to concerned.
     Regards,
    Greg H.
    Applications Engineer
    National Instruments

  • Vision acquisition express stalls when i select a camera even if i click 'refresh'

    The vision acquisition express stalls when i select a camera even if i click 'refresh'. Using Labview 2010 (evaluation) on a Windows 7 laptop and tried on another computer running windows xp.

    Hi,
    A few questions:
    1) What kind of camera are you using?  (what model, are you using IMAQ, IMAQdx, what version, etc.)
    2) Are you able to acquire from your camera in MAX? 
    3) can you run a shipping example using the low level VI's or does this only happen in Vision Acquisition Express?
    Tejinder Gill
    National Instruments
    Applications Engineer
    Visit ni.com/gettingstarted for step-by-step help in setting up your system.

  • Vision Acquisition Express VI error

    Hello
    I am new in labview and I am using the Vision Acquisition Express VI in a while loop. When I run the code, I get an error message " NI-IMAQdx: (Hex 0xBFF69004) Invalid camera session".
    Please help me
    Attachments:
    screenshot.png ‏7 KB
    visionacquisition.vi ‏105 KB

    Which iteration? If it fails from the very first its likely that the express VI is not configured correctly. If it fails on subsequent iterations there might be a problem using the express VI in a loop (never use express VIs inside loops).
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Airport express suddenly stopped working

    My dad updates something on his system and suddenly my wifi, which had been working not 5 min prior to this, suddenly stops.  Now, no matter where in the house we plug it it, the airport express keeps blinking a yellow light.  It just stopped working.  Any ideas?

    It's always a good idea to completely power cycle the entire network after any changes or updates to a network.
    If  you have not already done so.......
    Power off everything....all devices....order is not important
    Start the modem first and let it run for a minute or two by itself
    Start the next device connected to the modem the same way
    Start the Airport Express the same way
    Start each computer and device one at a time about a minute apart
    Check the network for proper operation

  • Both my Airport Express have stopped working with OSX 10.7.5 Lion.

    I'm going off my head!  Both AE's 802.11n have stopped working, and no longer appear in the Airport Utility
    I installed the Airport Utility 5.6 but still no luck.  I reset the AE's with a 'hard reset' and also tried plugging in an Ethernet Cable, still no joy as both AE's have become 'invisible' to the config utility
    Running 10.7.5 (11G63)
    Anyone managed to get these re-appear?

    UPDATE
    By accident I have solved this.  I previously had two WiFi networks running, the 'prime' one is from a Sky router and the second one from an Apple Time Capsule.  To try and fix poor Sky broadband performance, I switched off the Time Machine to negate any potential issues of DNS clashes.  During this 'no Time Machine' period I plugged in the old Airport Express's one by one, did a hard reset by pressing the reset button with a paperclip on the AE whilst plugged in.  The Airport Express after flashing yellow quickly, then turned a steady yellow for around 2 minutes before started yellow slow flash.  Only then did it appear in the Airport Utility window (I used ver 6.1 without any issue on a Mac running 10.7.5)  BE PATIENT - THE AIRPORT EXPRESS TAKES A WHILE TO APPEAR AND YOU NEED TO RE-SCAN
    When the yellow flash starts, re-scan for 'other Airport Base Stations' using the grey button top right of the utility window.
    I configured one with an ethernet cable, and one over WiFi, both working and the whole job took maybe 10mins each
    I'm using old Airport Express devices 802.11n.
    Have not switched on the Time Machine yet - fingers crossed it does not all fall in a heap again !!!

  • My airport express suddenly stopped working.

    I have had an airport express unit that I purchased new from Apple about a year ago. The warranty is now expired and it has suddenly stopped working. It shined its amber light for more than an hour, and when I unplugged it to see if it would work somewhere else, it flashed its amber light and then went blank. It will now display no lights at all when it is plugged in, and my computer can not detect it, so it is obviously dead. Has anybody had any experience with this issue? I tried a hard reset (back when the amber light still worked, yesterday), but I do not know if it worked since the unit would not stay on for more than a few seconds (now not at all).
    Other specifications: It has been used pretty much non-stop since its purchase a year ago as an extender for my Time Capsule's network. It served its purpose, although it seemed to lose connection fairly often. Nothing it didn't fix on its own though.
    Well, that's my rant. Thanks in advance!

    Unless you want to carefully saw open the case along the center seam with a fine toothed hacksaw or similar tool to open up the AirPort Express and look for something obvious....like a connector that has come loose or broken wire, it is time to replace the AirPort Express.
    Your chances of success are very small if you want to try the repair route, so do this for the fun of it more than hoping that it will work.
    Even if repairs were possible, a regular shop would likely charge you more than the cost of a new Express.

  • Airport express has stopped working when college switched network to 'N'

    Hi all,
    My university has just switched their wireless to 'N'-band. My airport express ('G') is now upset: not only has airtunes stopped working (I previously had joined it to the dorm wireless network), but I can no longer even access my airport in the Airport Utility (5.3.2).
    I've done a hard reset of my airport express and I still cannot access the device via the airport utility. When I click 'rescan', the device is never found.
    I have noticed, however, the default network "Apple Network 600eab' appearing among my wireless network choices. Unfortunately, Airport never actually lets me join that network.
    Does anyone have any ideas I can try?
    Thanks
    LD

    I've had to go back to firmware 7.4.1 and that seems to work.  Anyone know what is up with 7.5.2?

  • Airport Express REALLY stopped working

    My Airport Express has really stopped working: dead as a dodo, defunct, etc. It doesn't show in Airport Admin Utility or in iTunes, and the front light is also dead. I have tried changing the easy-access fuse but it makes no difference.
    I assume it has rather annoyingly just died, but why or how I do not know. Is there anything else I can try or do? Is it worth having it repaired, given the relatively low cost?

    Apple has already killed the main thread about this topic months ago, and have left isolated thread to develop a bit before sometimes deleting them: http://www.hardmac.com/news/2006-08-25/#5851
    anyway, our curretn investigations show that APX with serial starting with HS4xx or HS5xx or even HS6xx are mostly affected by the sudden death syndroma.
    other APX series manufacture with a serial starting with 6F are much much less prone to die after the end of the warranty.
    Please record your defective APX via the following link:
    http://www.macbidouille.com/apxdefect.php
    and visit hardmac forum to follow the story: http://forum.hardmac.com

  • Airport Express has stopped working

    Hi.
    My AE has just stopped working and now can't connect to the network.  I have tried a harware reset and all I get is the amber light and now and again it flashes then turns green and then back to amber.  It looks to me as if the something has damaged the hardware as I cant get it to showup in my airport utility.
    Regards
    Amidabrian

    If you have tried a Factory Default Reset a few times, and the AirPort Express is still acting up, it is likely defective and will need to be replaced.
    Resetting an AirPort Base Station or Time Capsule FAQ
    If it is out of warranty......and you have the patience.....and want to take a real longshot......carefully saw open the case of the Express along the center seam to open up the device and look for something obvious....like a connector that has come loose, broken wire, etc.

  • Express has stopped working with 2Wire WiFi router

    I have AT&T U-verse service and used the supplied 2Wire router as the WiFi hub. Because of the other devices in our home, I have to keep the security setting on the network on "WPA-PSK (TKIP) and WPA2-PSK (AES)". Otherwise the devices can't connect.
    I have always used an Airport Express joined to the network to attach a USB printer and stream music to a stereo receiver. It has always worked, though it would occasionally mysteriously need to be reset and set up again to work with the network.
    Last week the Express stopped working again. This time it will not rejoin the network. After many tries, I have determined that the Express is not broken. It will connect with the network if I turn security off and if I set security on the network and the AX both to "WPA2-PSK (AES)" but if I keep the security setting on ""WPA-PSK (TKIP) and WPA2-PSK (AES)" on the network  it won't connect -- it accepts the settings then flashes amber, stops showing up on Airport Utility at all and has to be reset again. This occurs whether I set choose "WPA/WPA2 PERSONAL" or "WPA PERSONAL" with Airport Utility
    As it happens, an AT&T technician was out here today and he told me that AT&T sends updates to its gear, which might explain why the AX gets knocked off the network from time to time. Still, that doesn't explain why I could always fix it before and can't fix it now.
    Any thoughts on a possible solution?

    Follow-up: I gave up and attached an old Airport Extreme base station to the 2Wire router and turned off the wireless on the 2Wire. Sort of a waste, since I need an extra device to do what the 2Wire used to do alone, but everything works again.

  • Airport Express suddenly stops working

    Hi,
    Wondering if people have had this problem and if they resolved it.
    My Airport Express is used as my main wireless router, and there are 4 computers in this network. Often times my AE just stops working, I can't see it in wireless network list, it just disappears. It still has a green light, no flashing. I have to unplug the thing, wait a couple of seconds and then replug it. Then it'll work just fine 'till the next time it disappears on me.
    I wonder what's going on...
    Thanks

    Many folks are having similar problems, even when the AX is only being used to run iTunes through a home stereo. That's my situation: my old PB running OS 10.4.11 is working fine running iTunes through the AX but my newer MPG running OS 10.5.5 doesn't see the AX at all. This seems to have happened when I upgraded to iTunes 8 (which required an AX firmware update). Seems to me that there is a conflict of some sort.....which Apple has not yet deigned to fix.
    As an aside, the cynical side of me wouldn't be surprised if its a kink somewhere in Apple's latest DRM efforts, but that's just the cynical side of me. The non cycical side of me thinks that this is the type of bug that seems to be quite common in new Mac OS rollouts -- despite what the Apple commercials might suggest.

  • Airport Express Basestation stopped working.

    This is really just a last chance before I return the thing.
    I've been using an airport express basestaion for the last year. This evening I was connected to the internet and it just stopped and the green light went out.
    Seems like a major hardware fault. I've tried the fuse (in the plug). Tried it in a different socket. Tried the reset button. I've given it a while and tried again still nothing.
    Is there anything else anyone would recommend before I return it?
    I assume the year warranty extends to things like this.
    Ta
    iMac G5, iBook   Mac OS X (10.4.4)  

    Many airport express born stopped 1 year after constant use. I had this problem after 11 and a half month of use. It was out with no green light. Apple accepted to change it. But in France many people seem to have the same problem 12 or 13 month after use. You can see this above and on www.macbidouille.com (keyword : "airport express").
    One year and not more. Is it true ?
    - Attention, cette borne Airport Express se détruira à la fin de la garantie ! - Lionel - 06:20:58 - Réactions
    De nombreux lecteurs ont eu la malchance de voir leur borne Airport Express cesser de fonctionner peu de temps après la garantie. Ce nombre de cas, au moins 10 dont les mésaventures sont relatées sur nos Forums est suffisamment élevé pour nous prouver que ce problème n'a rien d'isolé, d'autant plus que les symptômes sont toujours identiques. D'un moment à l'autre, la borne refuse tout simplement de s'allumer, ce qui semble mettre en cause une fragilité de son bloc transformateur. Voici une photo prise par Dieru qui a (assez sauvagement) ouvert sa borne en panne et hors garantie.
    Si vous aussi avez des problèmes similaires avec une Airport Express, merci d'apporter votre témoignage. Il nous sera ainsi éventuellement possible de cerner une série défectueuse.
    Le problème Airport Express, suite - Lionel - 05:46:33 - Réactions
    Depuis hier, et la publication de la brève, nous avons reçu de partout dans le monde de très nombreux témoignages qui rapportent tous la même histoire.
    D'un instant à l'autre, et sans la moindre intervention extérieure, la borne Airport Express s'éteint pour ne plus jamais se rallumer.
    Une première étude des numéros de séries ne nous permet pas d'y trouver un quelconque signe de série défectueuse.
    Si le problème se produit de temps à autre durant la garantie, il a la fâcheuse tendance à arriver au treizième mois d'usage de la borne.
    Il faut dire que de tous les produits Apple, une borne Airport est probablement le produit que l'on songe le moins à débrancher, même si l'on s'absente. C'est probablement l'explication de cette incroyable constance dans la durée de vie avant la panne.
    Un de nos lecteurs a réussi à faire repartir sa borne en l'ouvrant et en changeant le fusible. Merci à Dieru d'avoir pris cette photo.
    Ce fusible est un 500mA 250V. Il se trouve sous l'adhésif, ici jaune mais qui peut-être aussi de couleur bleue. Attention, si vous le changez, pensez à en mettre un ayant des caractéristiques identiques. Lors de la remise sous tension de la borne, soyez-en éloigné pour éviter tout risque de brûlure.
    D'autres ont essayé de le changer sans que la borne reparte.
    Notez encore que quelqu'un a réussi à la faire repartir en la faisant fonctionner avec des piles
    Donc tout concorde pour incriminer l'alimentation de la borne.
    Faudra t-il attendre une class action pour qu'Apple accepte d'en étendre la garantie ?
    - Et les bornes Airport Express continuent de griller - Lionel - 06:21:03 - Réactions
    Depuis la dernière fois où nous avons communiqué sur le problème affectant de trop nombreuses bornes Airport Express, nous avons reçu d'autres témoignages.
    Ils continuent à concorder avec les précédents, puisque les pannes surviennent le plus souvent au treizième ou quatorzième mois d'usage, avec une surprenante régularité.
    Apple refuse encore pour le moment une prise en charge sous garantie de ces bornes.
    - Bornes Airport Express, suite - Lionel - 07:21:10 - Réactions
    Un des membres des forums, fpoil, nous adonné sa borne Airport Express en panne. Nous sommes en train de voir ce qui peut clocher à l'intérieur.
    Il est visiblement impossible de la démonter proprement sans endommager plus ou moins la coque qui est très fortement collée/soudée.
    Si Apple décide de procéder un jour à une extension de garantie avec échange, ce dernier sera très coûteux, et la récupération d'une partie de l'électronique problématique et probablement peu viable d'un point de vue économique.
    Nous en profitons pour passer un nouvel appel à témoins.
    Est-ce que certains d'entre vous ont eu ce fameux problème de panne dans un pays où la tension électrique est de 110V ?
    En effet, après un bref récapitulatif, il nous semble que tous les cas de bornes en panne le soient dans des pays où la tension est de 220V. Ce pourrait être le début d'une piste.
    - Bornes Airport Express, un point sur le problème - Lionel - 05:45:57 - Réactions
    Comme promis, nous vous tenons au courant du problème rencontré sur des bornes Airport Express de plus de 1 an.
    Pour commencer, nous continuons à recevoir quotidiennement des témoignages de personnes dont la borne refuse d'un moment à l'autre tout service. Les symptômes sont toujours identiques à ceux que nous vous avons rapportés.
    Depuis notre appel à témoins, nous avons constaté qu'à quelques exceptions près, les pannes se produisent dans des pays utilisant des tensions de 220 ou 240V. Il est donc presque certain que ce problème soit lié à cette tension, tout comme celui rencontré sur les premiers iMac G5.
    Nous continuons notre recueil de témoignages et nos investigations

Maybe you are looking for